Excellent Guide to Reloading Covers the Basics Step-by-Step

The Shooting Sports USA website includes two excellent articles about the basics of metallic cartridge reloading. These two articles provide an excellent summary of the key procedures. If you are new to reloading, we recommend you read both articles:

Introduction to Metallic Cartridge Reloading Part I »

Introduction to Metallic Cartridge Reloading Part II »

Part II is particularly helpful because it explains the entire reloading process step-by-step, with 14 listed steps. The author notes: “In this, the second installment on metallic cartridge reloading, we’ll follow the sequence of steps involved in reloading a rifle cartridge and refining a metallic cartridge load. These steps are based on the use of a single-stage reloading press and a separate priming tool.”

Much important advice is provided as this article runs through the 14 Steps of Reloading. For example, when explaining Step 13, Bullet Seating, the article states:

“Proper seating depth is critical. Too much bullet protrusion and the cartridge may not work through the gun’s magazine, or it may fail to chamber. Too little and the bullet intrudes excessively into the powder chamber, decreasing volume and raising pressure. Neck tension is also important; any bullet that fails to seat with some resistance may be held only loosely by the neck and may be driven back into the case when the round is chambered, especially in semi-automatic arms.”

Important Guide to Detecting Over-Pressure Signs in Brass
As an example of the invaluable advice provided in these two articles, here’s a sample from Part II that explains how to determine if your load is over-pressure. We recommend that EVERY reader read this twice. There are more things to consider than a stiff bolt lift. You need to inspect cartridges very carefully:

Similar Posts:

• Step-by-Step Guide to Cartridge Reloading
• Good Online Guide to Basics of Rifle Cartridge Reloading
• Very Helpful General Guide to Reloading — Great for Newbies
• Learn Basics of Reloading Process with Sinclair Int’l Videos
• Reloading Skills — Learn the Basics with Sinclair Int’l Videos

Tags: Case Priming, Reloading, Reloading Press, Shooting USA, Sizing Dies