The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful so the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a major success, as rimfire guns are fun to shoot and ammo is very affordable. Now there are way more NRL22 matches than NRL centerfire competitions. The most popular NRL22 matches have drawn up to 200 rimfire competitors. And now there is a companion rimfire long-range series, NRL22X. Learn more about NRL22 and NRL22X at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are six (6) classes: Base, Open, Ladies, Young Guns (8-16), Old Guns/Adaptive, and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1200.00 (so you could spend $700 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Ladies, Young Guns, Old Guns, and Air Rifle Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The NRL also sponsors NRL22X matches. These involve significantly longer distances for greater challenge. In 2023 there were 15 major NRL22X matches, culminating in the NRL22/NRL22X National Championships in Maxton, NC on July 7-9, 2023.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
How to Participate in NRL22 and/or NRL22X
If you want to get started in NRL22 or NRL22X competition, you’ll need an NRL22 annual membership. These run from $25-$60 depending on class and discipline. CLICK HERE for annual membership information.
NRL22 Membership Benefits Include:
– Eligibility to participate in all NRL22 matches
– Eligibility to participate in all NRL22X matches
– Welcome gift (not all welcome gifts are the same)
– Scoring and Ranking for all events
– Newsletters and updates
– Eligibility for special NRL22 raffles and giveaways
– Access to special NRL discounts from participating sponsors
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
To facilitate consistent NRL22 match scoring, there is a popular NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed hangers. That’s lot of steel and hardware for $394.95. There is also an official 2020/2021 Expansion Target Package with 5 more hanging targets for $79.95.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 now has six classifications: Open, Base, Ladies, Young Guns (8-18 age), Old Guns/Adaptive, and Air Rifle. The NRL22 and NRL22X disciplines are continuing to grow in popularity.
Over the past 12 months, this article was one of the TOP TEN most-read Daily Bulletin features. We’re reprising it today for those who may have missed it the first time. The above diagram comes from a TiborasurasRex YouTube Video comparing G1 and G7 BC models. CLICK HERE to watch the video.
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Some readers are not quite sure about the difference between G1 and G7 models. One forum member wrote us: “I went on the JBM Ballistics website to use the web-based Trajectory Calculator and when I got to the part that gives you a choice to choose between G1 and G7 BC, I was stumped. What determines how, or which one to use?”
The simple answer is the G1 value normally works better for shorter flat-based bullets, while the G7 value should work better for longer, boat-tailed bullets.
G1 vs. G7 Ballistic Coefficients — Which Is Right for You?
G1 and G7 refer both refer to aerodynamic drag models based on particular “standard projectile” shapes. The G1 shape looks like a flat-based bullet. The G7 shape is quite different, and better approximates the geometry of a modern long-range bullet. So, when choosing your drag model, G1 is preferable for flat-based bullets, while G7 is ordinarily a “better fit” for longer, boat-tailed bullets.
Drag Models — G7 is better than G1 for Long-Range Bullets
Many ballistics programs still offer only the default G1 drag model. Bryan Litz, author of Applied Ballistics for Long Range Shooting, believes the G7 standard is preferable for long-range, low-drag bullets: “Part of the reason there is so much ‘slop’ in advertised BCs is because they’re referenced to the G1 standard which is very speed sensitive. The G7 standard is more appropriate for long range bullets. Here’s the results of my testing on two low-drag, long-range boat-tail bullets, so you can see how the G1 and G7 Ballistic coefficients compare:
G1 BCs, averaged between 1500 fps and 3000 fps:
Berger 180 VLD: 0.659 lb/in²
JLK 180: 0.645 lb/in²
The reason the BC for the JLK is less is mostly because the meplat was significantly larger on the particular lot that I tested (0.075″ vs 0.059″; see attached drawings).
For bullets like these, it’s much better to use the G7 standard. The following BCs are referenced to the G7 standard, and are constant for all speeds.
Many modern ballistics programs, including the free online JBM Ballistics Program, are able to use BCs referenced to G7 standards. When available, these BCs are more appropriate for long range bullets, according to Bryan.
[Editor’s NOTE: BCs are normally reported simply as an 0.XXX number. The lb/in² tag applies to all BCs, but is commonly left off for simplicity.]
SFC Brandon Green Fires 2023 First Shot at Camp Perry Matches
The First Shot Ceremony for the 2023 Camp Perry National Matches took place July 10, 2023. The star of the show was Sergeant First Class (SFC) Brandon Green of the USAMU, one of the greatest marksmen in American history. Brandon delivered a speech and kicked off the competition with the First Shot (see above), taken with a famed Winchester Model 70 used by Gary Anderson 51 years ago.
SFC Green is truly one of the greatest shooters on the planet. His record in major competitions is truly remarkable. Green has won three NRA National High Power Championships, and in winning the 2022 NRA Long Range Championship, Brandon became the first person in history to win all four individual matches in the series: the Wimbledon Cup, the Mustin Trophy, the Leech Cup, and the Remington Band of Brothers Trophy. Green, from Box Springs, Georgia, is the first shooter to accomplish this feat in the history of the National Trophies, spanning more than a century of championship rifle competition. In addition, Green has won the Interservice Long Range championships five times and the Interservice Individual Championship four times.
SFC Brandon Green Fires Cannon at Conclusion of First Shot Ceremony
CLICK HERE for gallery of photos from 2023 First Shot Ceremony at Camp Perry.
Green has had a stellar marksmanship career. First Shot Ceremony Emcee and CMP Programs Chief, Christie Sewell noted: “His historic 2018 shooting season finished with Brandon earning four individual national records, capturing his first President’s 100 Match win in dramatic fashion. He set a new national record – a perfect score of 400, with a 20 ‘X’ count. That year he also won his third National Trophy Individual championship and third Mountain Man Trophy, setting a new national record.”
Green Fires First Shot with Gary Anderson’s Famed Winchester Model 70
Green was given the opportunity to choose his gun for the ceremonial first shot, so he chose the bolt-action Winchester Model 70 that Director Emeritus of Civilian Marksmanship, Gary Anderson, used in 1972 to set the only perfect 200-yard standing slow-fire score at the National Matches. “To shoot it was absolutely a huge honor,” Green said. “I was shooting a piece of history.”
The gun’s story begins long before that historic shot. “This gun plays a special role in the history of marksmanship,” said Anderson. “It started as my dad’s rifle and was converted to a match rifle. In 2019, I used it to shoot the first shot, so it’s been here at the First Shot Ceremony a couple times.”
Brandon Green Joins Rimfire Match before First Shot Ceremony
Green, a 20-year member of the U.S. Army Marksmanship unit, arrived at Camp Perry a few days ahead of the rest of his USAMU teammates. SFC Green wanted a few days, he said, to collect his thoughts and prepare the First Shot Ceremony speech he would deliver to the hundreds of people attending the event. But he got sidetracked. As he walked across the Petrarca Range parking lot, he stopped to watch men and women compete in the Smallbore Prone Iron Sight Championship and to talk to CMP Smallbore Program Manager Brad Donoho.
“I told Brad it looked fun and said I’ll have to find a rifle,” Green said. “Brad said I’ve got a guy who has an extra rifle. I borrowed a gun and borrowed ammo and had a lot of fun.”
Members of Congress and CMP Chairman/CEO Attend First Shot Ceremony
The July 10 First Shot ceremony was attended by hundreds of marksmen, National Matches competitors, and dignitaries in the legislative, marksmanship, and military worlds. Guest speakers were Congresswoman Marcy Kaptur (Ohio); Congressman Bob Latta (Ohio); Major General John C. Harris Jr.; and Gerald O’Keefe, Chairman of the Board and Chief Executive Officer of the Civilian Marksmanship Program. O’Keefe talked about the impact the National Matches’ long history has made on marksmanship, and he said the CMP is committed to carrying that impact into the future.
Tech Report by B. Walker, owner of The Urban Rifleman LLC
I have been moly coating since I started shooting rifles nearly 26 years ago. I have always moly-coated my bullets. I figured if it was good enough for Walt Berger, it was good enough for me (Walt still moly coats his bullets to this day, if recent match pictures are any indication). I had always used the typical dry method (without the wax) and I had the same jar of moly (molybdenum disulfide) for many years.
I had tried all kinds of methods over the years. But then AccurateShooter Forum member “Bowfisher” sent me a message about moly-coating bullets using water. After his suggestion, I did several batches using the moly-in-the-water method. I was stunned with the great results. This Wet Moly method is the cleanest, easiest, and best coating method I have ever tried. I strongly believe Wet Moly should be the recommended method.
Traditional Dry Moly Coating Process is Dusty and Messy
Before I started the Wet Moly process, I always coated my bullets in small containers in my big Dillon tumbler. I would put the bullets in old EMPTY 1-lb powder containers and add the moly. I would place the powder containers in my big Dillon tumbler and tumble for at least three hours. I would then throw rice in with the bullets to soak up any excess moly dust and shine the bullets. Then I would shake out the rice using a lid with holes drilled in it. My coated stuff came out beautiful if I do say so myself even dry. However, there was always dust and moly mess (there was always some on my fingers when I would handle the bullets after). I only liked to doing coating in big batches to get it over with because it was a chore (by all means don’t get moly on the bottom of your shoes and track the carpet)!
Wet Moly Method — Tumbling in Bottles with Moly and Water
The new wet method entails adding water to the bullets during the tumble in the bottle, and it is way easier and cleaner. The final product is totally dust free and will not come off on your fingers as there is no dust or residue. I think they shoot better too, and the moly works as it is supposed to. I won’t get into the debates over the merits of moly. Some folks believe it works for them. This article is intended for those guys — it is not intended to convert handloaders who are happy with shooting uncoated bullets.
Editor: None other than John Whidden, Multi-Time National Long Range Champion, moly-coats his bullets. Whidden also uses a Wet Moly application method. He agrees that applying moly in a water solution delivers the best results, and doesn’t leave dusty residues.
Here is the basic outline of the Wet Moly application method. In addition to this outline, I created an instructional video that shows my entire process. [Editor: Definitely WATCH the video. It is important to see the post-tumbling rinsing and buffing processses.]
1. Use old 1-lb powder containers. Work over a sink. Add the bullets in reasonable batches to the containers (lets say 2-3 inches of bullets). I try to use use only enough water to cover the bullets and I use a little more moly than I used to with a dry application. I suggest using half a teaspoon of moly per two inches depth of bullets.
2. Tumble for four hours (at least). I tape the container lids shut before placing them in the tumbler. Then, simply place the powder container in your vibratory tumbler.
3. After the elapsed time, take the bottle to the sink and, dump contents into a plastic strainer. I use an old spaghetti strainer that I save just for moly. IMPORTANT: BE SURE you have a strainer that won’t let the bullets fall out! Stream water (from faucet) gently over the bullets to thoroughly clean excess residues off the bullets. Shake strainer to get all the water out. See video time 6:00-10:00.
4. Sift out the bullets onto a paper towel inside an old baking pan and shake to buff. Repeat until the bullets are completely dry and buffed to a high shine. The bullets are clean, dust-free and the moly is gorgeous! Leave for several days before storing or put them in your oven at about 130 degrees for 30 minutes to remove the last bit of any moisture. (WARNING: DO NOT use excessive oven heat or cook too long — set a timer!).
If you follow these instructions, the result should be the best moly coating you have ever seen!
Before and AFTER Wet Moly. Note how uniform the moly coating is on the bullets. The Wet Moly process also leaves a perfect glossy finish after rinsing and drying. And the bullets are totally dust-free! These are Sierra #1380 .224 69gr HPBT MatchKings.
Be sure to visit our online store at TheUrbanriflemanstore.com. We have a full compliment of front and rear bag riders for various rifles that we designed and produce in-house. We also stock Revolution laminated benchrest stocks, and we sell stainless steel Remington prefit barrels (which are getting rave reviews from customers). Also available are Wilson dies, Timney and Triggertech triggers, Berger and Sierra bullets, Magpul and Accuracy International chassis, and lots more.
Everyone should have a heavy-duty, thick-walled steel gunsafe for their firearms and valuables. Ideally this should weigh 400+ pounds and offer fire protection for the contents. However, a gun owner may also want more rapid access to defensive arms and security items, in a different part of the home. That is where the “hidden in plain sight” concept comes into play.
Freedom Cabinet Holds Long Arms and Pistols — RFID Access
The unique Freedom Cabinet, shown above, is a patriotic, wall-mounted Stars & Stripes Flag-themed concealment unit. Available in Wood, Steel, or Carbon Fiber, each secure Freedom Cabinet features inlaid steel and Invisible RFID or Biometric locking systems. The Freedom Cabinet regularly costs $229.95. Along with this flip-up Freedom cabinet, there is a “Slider” version priced at $284.95.
Get the 20% discounts this Memorial Day week with CODE “THANKYOU20″. Later, for Father’s Day week, save 20% with CODE “DAD20″
Tactical Walls Shelf Secure Storage Unit
TacticalWalls.com, producers of home security/concealment products, offers clever furniture item that hold defensive arms. We like the big model 1242 Top Locking Shelf. This will hold a long gun plus a pistol and other items, which can be accessed rapidly with magnetic keys. The foam-lined secret compartment measures 12″ Deep x 42″ Wide. Price starts at $540.00.
Tactical Walls also have a smaller model 825 Top Locking Shelf that holds two pistols and some small accessories. This model 82 has a 8″ x 25″ W foam-lined hidden compartment accessed by magnetic keys. The model 825 locking Shelf retails for $473.00 – $405.00, depending on wood choice.
We’re in the middle of summer, so many folks will head to the hinterlands on prairie dog safaris. On a good P-Dog adventure, you may shoot hundreds of rounds over a long weekend. So you’ll need plenty of ammo. With these ammo volume requirements, you probably won’t have time to load to benchrest standards, and you may not have the budget for match-grade bullets. To save time you may throw (rather than weigh) your charges, or even load on a progressive press. This all raises the question of ammo accuracy — how good is “good enough”? A Sierra Bullets expert answers that question here — explaining how to efficiently load ammo for varmint work.
Ammunition Accuracy Requirements 101 — Varmint Ammo
This story based on article by Sierra Bullets Chief Ballistician Tommy Todd
I load and shoot ammunition for a living. In my duties here at Sierra I constantly test bullet accuracy for our production needs. Because of this, I shoot a variety of different calibers and cartridges on a daily basis and a large demand of this shooting is keeping the guns and loads tuned for optimum accuracy. I have a very narrow window of tolerances to maintain in order to provide our customers (you) with the most accurate bullets on the market.
I have learned many tricks and techniques over the years to tuning a load, prepping brass, and cleaning barrels to keep a gun shooting. I often utilize the things I have learned and take them to extreme levels when competing in a shooting event. I also often ignore most of these things (other than safety) and simplify the process if the shooting I will be doing does not warrant.
Recently I went on a prairie dog shoot in Wyoming with some good friends. The targets cooperated as did the weather with the exception of some challenging winds we experienced. We had a great time and make a lot of hits on those small rodents. When loading for the .223 Remington rifles and the TC Contender, I cut a few corners in the ammunition-loading process due to both time constraints and accuracy needed. When shooting at a prairie dog a miss is simply that, but when shooting at say the X-Ring at 1000-yard competition, a poorly-placed shot [harms your] placing in the match. Because of this, I can afford to miss an occasional shot at a varmint due to ammunition capability without worry but will not allow the same tolerances in my match ammo. For the Wyoming trip I utilized a powder measure and simply dumped the charges into primed cases that had been full-length sized and primed.
I had measured enough for length to know that while there was some variance all were under maximum length. I know there is some variation of the measure I utilized but not significant enough to warrant weighing every charge. When seating the bullets a competition seating die was used and I verified OAL on the occasional cartridge to make sure nothing changed.
This varmint ammo, with thrown charges, put TEN shots inside ONE inch at 200 yards. That’s half MOA. Good Enough? Absolutely!
The ammo produced shot under one inch at 200 yards in one of the guns I planned on taking on to Wyoming with me. [Editor: That was for TEN Shots — see above.] I knew I had loaded ammunition that was quite suitable for the task at hand which was evidenced by the number of hits I was able to make at fairly long range.
NOTE: The author, Tommy Todd, explains that, when loading ammo for F-Class matches, he uses more exacting methods. He weighs every charge and seats his bullets carefully with an arbor press. Todd adapts his methodology for his particular application. The lesson here is to load to the level of precision demanded by your discipline. READ Full Story HERE.
Bet you’ve never seen anything like this before — a “double-decker” indoor shooting range. Lotus Gunworks of Jensen Beach, Florida, operates a super-sized twin-level indoor shooting range featuring a two-story-high steel funnel bullet trap. Nicknamed the Lotus 8/11 for the number of steel panels used to create it (eight panels on the bottom slope and 11 panels on the top slope), this version of Action Target’s Total Containment Trap is the first of its kind. “No one has ever seen a range like this before” noted Lotus Gunworks’ Robbie Abell.
Abell came up with the two-story concept when it became clear that the new Lotus building in Jensen Beach was not wide enough for two side-by-side ranges AND a gun store. Necessity was the mother of invention… Lotus wanted at least two ranges, so the only option was to make a double-decker range where both levels shot into the same bullet trap.
Indoor ranges require ventilation to remove potentially hazardous dust and lead particles. The sheer size of the double-decker range presented a unique challenge, but Carey’s Small Arms Range Ventilation installed a system that can completely replace all the range air every 80 seconds.
Other Multi-Level Shooting Ranges
While the Lotus Range may have the first two-story bullet trap, it’s not really the first-ever double-decker indoor shooting range. Other multi-level ranges exist, they just don’t have the giant bullet trap. In fact, some of the multi-level ranges in Europe are bigger and even more sophisticated.
Brünig Indoor facility — Multi-Level Range Underground
Switzerland boats a popular shooting facility built completely underground. The large, deluxe Brünig Indoor facility includes a 300m underground range with multi-level shooting stations.
This video shows centerfire rifle practice on the upper level of one of Brünig Indoor’s shooting tunnels:
Dutch Double-Decker Range
Here’s a Dutch Double-Decker Range. Check out Schietsportvereniging (SSV) Katwijk, a great twin-level range in Holland featuring electronic targets with displays at each shooting station (on both levels):
“Since the beginning of the Biden administration, the number of Federal Firearms Licensees (FFLs) has gone down by [over] 1,600.” — America’s 1st Freedom
The Biden Administration, acting through the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) is aggressively working to shut down gun stores and FFL businesses throughout the country. According to the NRA America’s 1st Freedom site, some 1619 FFLs have gone out of business since 2020 when Joe Biden took office. That is a major change, reflecting extremely hostile and aggressive policies now being pushed by the anti-gun Biden administration.
“The Biden administration said that they would use the ATF as a bludgeon against the industry, and that’s in fact what they are trying to do. They are turning the agency that is charged with regulating the firearm industry — the manufacturers, the distributors, the retailers — and using the levers of that regulatory agency as a means to shut down and deny people their Second Amendment rights.” – Mark Oliva, NSSF Director for Public Affairs
We recommend our readers consult a recent, detailed article on Americas1stFreedom.org that explains the ATF’s aggressive campaigns against gun dealers and small-business FFLs. That article explains how the aggressive Biden policies have resulted in a huge number of gun shops and FFLs shutting down: “What’s the result of Biden’s constant drumbeat of propaganda and executive actions against America’s firearms retailers? According to ATF figures, as of April 2023, there were 1,619 fewer licensed firearms dealers than there were when Biden took office in January 2021.”
Additionally, ATF records indicate licensee revocations jumped sharply after Biden’s directives to the ATF: “In January 2022, out of 470 FLL audits performed, there were only three license revocations. A year later, there were 678 (44% more) inspections and 17 revocations — six times the number of revocations from the previous January.”
“What [Biden’s] latest Executive Order actually did was direct various federal agencies to make life as difficult as possible for firearms dealers, as Biden knows that making it more difficult for retailers to sell guns makes it more difficult for law-abiding Americans … to buy them.” — America’s 1st Freedom
Along with the aggressive actions of the ATF, President Biden wants to ban certain types of firearms through Executive Order. This is rule by fiat, without Legislative approval, which is not what the Constitution intended. Laws are to be made by Congress, not by a dictator.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Midsouth — Hornady Press Kit, $319.99 w/FREE Case Prep Duo
⏺ Great Deal on reloading kit with Free Case Prep Machine worth $65
Here’s an excellent reloading package with everything you need to start handloading cartridges. And right now you can save 20%. With this Hornady Lock-N-Load Deluxe Classic Reloading Kit you get the Classic single-stage press, powder measure with stand, digital scale, hand priming tool, OAL gauge tool, calipers, loading block, bullet release “hammer”, powder trickler, funnel, chamfer/debur tool, shellholder pack, die bushings, lock rings, Hornady Reloading Manual and much more. Folks, this is a great bargain at $319.99! The bonus Case Prep Duo would cost you $64.99 at MidwayUSA by itself, so it’s like getting the whole Kit for $255 — a steal!
⏺ Exclusive Weatherby Vanguard with 12 standard and Magnum chamberings
Here’s a great deal on a quality, American-made hunting rifle with a Cerakote finish, and sub-MOA accuracy guarantee. This Sportsman’s Warehouse Exclusive Weatherby Vanguard is offered in 12 different chamberings all for $879.99, with built-in discount. This rifle has smoked bronze Cerakoting on the action, bottom metal, and hammer-forged, spiral-fluted barrel. It features an excellent adjustable 2-stage trigger with 3-position safety. The handsome Monte Carlo stock is a pale green with gray webbing accents. You could pay twice as much and not get a better hunting rifle than this.
3. Bullet Central — Krieger and Bartlein Pre-Fit Barrels
⏺ Great quality pre-fit barrels, ready to mount to your rifle
Do you own a Kelbly, BAT, or Impact action and need a new barrel but don’t want the hassle (and cost) of having a smith chamber and headspace the barrel? Consider a Krieger or Bartlein Pre-Fit Barrel from Bullet Central. On BulletCentral.com you’ll find a wide range of barrels in various calibers for multiple action types. Place your order for professionally-chambered, custom-grade barrels that you can install yourself.
4. Grafs.com — FREE Shipping and FREE Hazmat Specials
⏺ Get Free Shipping over $75 and Free Hazmat over $150 powder/primers
Graf & Sons is a excellent source for gun parts, tools, and reloading supplies. Right now if you spend $75.00 or more on most items you’ll get FREE shipping in the contiguous 48 states. Note, there are some exclusions including clearance items. The other special deal provides FREE Hazmat, a $23.50 value. If you purchase $150.00 or more of in-stock powders and/or primers, one HazMat fee will be waived per order.
5. EuroOptic — Leica 6X Zoom Scopes, 40-44% Off
⏺ Great deal on superb long-range hunting/varminting scopes
Here are two very high-quality Leica riflescopes at big discounts. These are SFP optics with 0.1 Milrad clicks. With an amazing 6X zoom ration, there is a huge field of view at the 2.5X base magnification. Then you have 15X on the other end for long shots. The 56mm objective version is now $899.99 on sale, a 44% savings off the $1599.99 price, while the version with a 50mm objective is also $899.99, a 40% discount off the regular $1499.99 price. With these deals you can save up to $700 — enough to buy a rifle.
6. Midway — Caldwell Front Rest and Rear Bag, $99.99
⏺ Great price on good set-up for sighting-in hunting rifles
Need a good basic front rest and rear bag to sight-in that hunting rifle or do load development? Here’s a solid, functional benchrest set-up at a great price. This Caldwell Rock BR Rest and Bag Combo is great combo deal for just $99.99. This will more than suffice for testing a hunting rifle or basic bench-work. Upgrade the rear bag later. The front rest adjusts for both windage and elevation. This is a GREAT deal — consider that the Caldwell Rock BR Rest by itself sells for $179.99 at Sportsmans.com.
⏺ Great tool when a large number of cases need bullets removed
This is a very efficient bullet-pulling tool that has earned many positive user reviews. Frankford Arsenal’s Pile Driver Bullet Puller offers efficient processing with plenty of leverage. This unit mounts to your bench or reloading room wall. The lever design uses spring power to pull bullets up to .30-06. An optional magnum carrier (sold separately) will pull bullets up to .338 Lapua length. Bullets and powder are captured in an included trap with optional tube for high-volume. This unit design uses inertia to pull bullets with ease, making it faster, more user friendly and less damaging than traditional bullet pulling methods.
⏺ Great deals on durable AR500 steel targets — watch video below right
Caldwell’s new bright, easy-to-see steel targets come in multiple shapes and sizes for competition, training, and recreational use. Made of AR-500 grade hardened steel, these bright yellow targets can withstand thousands of rounds. Rated up to a 3000 fps impact velocity and a 3500 ft-lb impact energy, these targets come in seven styles and sizes with three hanging solutions. These bright yellow Caldwell AR500 Steel Targets are on sale now on Amazon, starting at just $16.99 for the 5″ Gong Target.
9. Amazon — RCBC Hand Primer Tool, $59.99
⏺ Handy tool primes all common rifle cases
Do you want to prime your brass without the hassle of something being mounted to a bench? Check out the RCBS Hand Primer and seat primers anywhere you want. The universal shell holder will accept cases from .32 ACP to .45-70 Government and the patented safety gate isolates the primer seating operation from the primer supply virtually eliminating the possibility of tray detonation.
How many times have you grabbed your electronic earmuffs only to find the batteries are dead. To avoid the hassles (and cost) of battery replacement, consider Walker’s Rechargeable Razor Ear Muffs. These rechargeable muffs have an estimated 80 hours of run time. That’s enough to get through several DAYS at the range. Then you can recharge the muffs conveniently at home or in your vehicle with a common USB cable. To hear range commands clearly, the muffs have HD speakers. Plus there’s a handy audio jack. These muffs are comfortable and boast a 23 dB Noise Reduction Rating (NRR).
Are you considering a small 9mm handgun for concealed carry (CCW) and self-defense? Then you should read an excellent 5-gun comparison review by Guns America Digest. This detailed article and accompanying video cover what the author calls the “Miracle 9 category” — 9mm micro-compacts that hold 10 or more rounds without the use of extended magazines. All these five pistols are very easy to conceal and all are striker-fired. The pistols compared are: Ruger MAX-9, SIG Sauer P365, Smith & Wesson M&P Shield Plus, Springfield Armory Hellcat, and Taurus GX4.
Here are key, short highlights of the Guns America 5-pistol roundup review. This is a start, but we strongly recommend you read the full comparison review on Guns America Digest.
L to R: Ruger MAX-9, Springfield Armory Hellcat, S & W M&P Shield Plus, Taurus GX4, SIG Sauger P365.
Ruger MAX-9
“The Ruger MAX-9 is the only pistol in this class to come standard with a slide cut that is ready for a mounted red-dot optic. The MAX-9 [also has] an impressive pair of sights. The front sight is a long one that houses a florescent yellow fiber optic[.] The slide stop control is small and can be quite difficult to use as a slide release – a common trait for Ruger handguns.”
SIG Sauer P365
“The P365 was the first Miracle-9 to market and literally knocked the industry on its butt. Despite rumors of intermittent problems or QA concerns, the marketplace beat a path to SIG’s doorstep and bought this pistol in droves. Being first to market has its rewards. The P365 is available in about a half-dozen variations, some significantly distinct — like the XL with its longer barrel and slide.” [Note: in this article, the reviewer focuses on the P365 SAS model with flush-mount fiber-optic sights.]
Smith & Wesson M&P Shield Plus
“The Shield is most likely the best-selling micro-compact 9mm handgun in the past decade. The Shield Plus [is] a gun with millions of rounds of experience and credibility, proven popular ergonomics, and the presumption of staunch reliability. It is available in several variations that included sight upgrades and [optional] manual safety switch.”
Springfield Armory Hellcat
“The Hellcat is well-appointed, with an excellent set of sights called ‘U-Dot’ and a very nice trigger. Absent on the Hellcat is the rear grip safety that is found on XD models. The Hellcat is available in two variations – with or without the slide cut for an optic (and the inclusion of an optic is a further option).”
Taurus GX4
“The GX4 follows closely to the very popular TX22 in terms of ergonomics and grip texture. The controls are well placed and function very nicely. Similar to the P365 SAS, there is no takedown lever that protrudes from the frame, just a rotating pin. This reviewer has found the trigger of the GX4 to be less than ideal.”
Should the Five Miracle 9mms Be Six? (Adding a Glock 43X)
One Sheriff’s Deputy posted this comment on the Guns America review, suggesting that the Glock 43X should have been added to the comparison: “I’ve had a SIG P365 from the release. Love it. I’m a Deputy Sheriff and it is my constant off duty companion for years. Tried Hellcat, nice gun but paper and shot timers don’t lie, I was less accurate and slower. Other officers were better with it than Sig. So like we all know, shoot what suits you. Now I have two Glock 43X MOS. Factory night sights and just a trigger connector for add-ons. Those guns surprised me, I beat my Sig times and accuracy was same, excellent. So I’ve been carrying a 43x more. The 43x is definitely a contender to look at.” Here is the Glock 43X, silver slide version (10+1 3.39″ barrel):
NRL22 is a great way to get into competition shooting with minimal expense. There are six (6) classes: Base, Open, Ladies, Young Guns (8-16), Old Guns/Adaptive, and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1200.00 (so you could spend $700 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Ladies, Young Guns, Old Guns, and Air Rifle Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
How to Participate in NRL22 and/or NRL22X
The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 now has six classifications: Open, Base, Ladies, Young Guns (8-18 age), Old Guns/Adaptive, and Air Rifle. The NRL22 and NRL22X disciplines are continuing to grow in popularity.
The better, up-to-date ballistics programs let you select either G1 or G7 Ballistic Coefficient (BC) values when calculating a trajectory. The ballistic coefficient (BC) of a body is a measure of its ability to overcome air resistance in flight. You’ve probably seen that G7 values are numerically lower than G1 values for the same bullet (typically). But that doesn’t mean you should select a G1 value simply because it is higher.
Drag Models — G7 is better than G1 for Long-Range Bullets
Be sure to visit our online store at 
We recommend our readers consult a recent, detailed article on 
