How to Create A Dummy Round to Aid Barrel Chambering

How and Why to Create a Dummy Round
When you have a new custom rifle built, or a new barrel fitted to an existing rifle, it makes sense to create a dummy round. This should have your preferred brass and bullet types, with the bullet positioned at optimal seating depth. A proper dummy round helps the gunsmith set the freebore correctly for your cartridge, and also ensure the proper chamber dimensions.

Respected machinist, tool-maker, and gunsmith Greg Tannel of Gre-Tan Rifles explains: “I use the dummy round as a gauge to finish cut the neck diameter and throat length and diameter so you have [optimal] clearance on the loaded neck and the ogive of the bullet just touches the rifling.” He recommends setting bullet so the full diameter is just forward of the case’s neck-shoulder junction. “From there”, Greg says, “I can build you the chamber you want… with all the proper clearances”.

Greg Tannel has created a very helpful video showing how to create a dummy round. Greg explains how to measure and assemble the dummy and how it will be used during the barrel chambering process. Greg notes — the dummy round should have NO Primer and No powder. We strongly recommend that every rifle shooter watch this video. Even if you won’t need a new barrel any time soon, you can learn important things about freebore, leade, and chamber geometry.

Must Watch Video — This has been viewed over 790,000 times on YouTube:

This has been a very popular video, with 782,000 views! Here are actual YouTube comments:

That is the best explanation I’ve ever seen. Thank you sir. — P. Pablo

Nice video. You do a very good job of making this easy for new reloaders to understand. I sure wish things like this were available when I started reloading and having custom rifles built. Once again, great job, and your work speaks for itself. — Brandon K.

Beautiful job explaining chambering clearances. — D. Giorgi

Another Cool Tool — The Stub Gauge

When you have your gunsmith chamber your barrel, you can also have him create a Stub Gauge, i.e. a cast-off barrel section chambered like your actual barrel. The stub gauge lets you measure the original length to lands and freebore when your barrel was new. This gives you a baseline to accurately assess how far your throat erodes with use. Of course, as the throat wears, to get true length-to-lands dimension, you need take your measurement using your actual barrel. The barrel stub gauge helps you set the initial bullet seating depth. Seating depth is then adjusted accordingly, based on observed throat erosion, or your preferred seating depth.

Similar Posts:

• How to Craft a Dummy Round To Aid Barrel Fitting
• The Dummy Round — Why You Need One for Chambering
• How to Make a Dummy Round — Greg Tannel Explains
• Barrel Stub Gauges — Handy for Many Reloading Tasks
• Got Stub? Barrel Stub Gauges Serve Many Functions

Tags: Barrel Chambering, Chamber Dimensions, Dummy Round, Gre-Tan, Greg Tannel, Headspace