Fire-Form with Fouler Shots — Save Time, Bullets, and Barrel Life

Fire-Form with Foulers

Here’s a tip for guys who shoot the 6 PPC, 6 Dasher, 6 BRA, .284 Shehane, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.

This procedure is recommended by Joel Kendrick, the 2004 IBS 600-yard Shooter of the Year. After he cleans his barrel, Joel knows it takes two or three shots to foul in the bore before accuracy returns. When shooting his PPC, Joel uses those fouler shots to fire-form his new brass. Joel explains: “I like to have relatively new brass always ready. By fire-forming a couple cases after each barrel-cleaning during a match, by the end of the weekend I’ve got a dozen or more freshly fire-formed cases to put into the rotation. If you do this with your fouler shots you get your fire-forming accomplished without using up any extra barrel life.”

This not only saves barrel wear, but it saves you trips to the range for the purpose of fire-forming. We thank Joel for this smart suggestion. For those who do not have a dedicated barrel for fire-forming, this should help keep your round-count down. Note: With this fouler fire-forming routine, you should ALWAYS do the fire-forming with the SAME POWDER you load for your match ammo. Joel currently works as the Supplier Quality Process Engineer for MMI-TruTec, a company that offers barrel surface coatings that can further extend your barrel life.

Similar Posts:

• Save Time and Bullets — Fire-Form with your Fouler Shots
• Fire-Form with Foulers — Save Time, Bullets, and Barrel Life
• Save Barrel Life, Bullet Cost, and Time — Fire-Form with Foulers
• TECH Tip: Fire-Form with Fouler Shots
• TECH TIP: Form Improved Cases with Hydraulic Forming Die

Tags: 6 Dasher, 6BRA, 6mm BRA, Brass Fire-Forming, Fire-Form, Fire-Forming, Foulers, Fouling Shots, Wildcat