Summer is approaching. That means many of our readers will be on the road traveling to matches or holiday destinations. LawShield, America’s largest provider of Legal Defense for Self Defense® coverage, offers a National Travel Guide for Gun Owners and state-specific Travel Guides for Gun Owners. These guides feature practical information for people traveling through nearly every state in the USA.
State-Specific Travel Guides — Access for FREE
State-specific Travel Guides and a National Travel Guide for Gun Owners can be accessed for FREE on the the U.S. LawShield website. For planning future travel, bookmark Resources.uslawshield.com/travel-guide,
According to Kirk Evans, President of U.S. LawShield, “Because there are so many details for people to understand before they leave home, we developed state-specific guides to help folks stay on the right side of the law. Take the time to learn the laws before hitting the road because they are not the same everywhere. Don’t wait until after the fact to plan for your guns when preparing for your trip.”
Travel Guide for Gun Owners Topics:
Permits/licenses recognized by specific states
State laws you should know, including vehicle carry, duty to notify law enforcement, and open and concealed carry laws
Where you can legally carry your gun
Federal laws you should know
Carrying in National Parks
Transfer of firearms
Traveling from state to state and the Safe Passage provision
Flying with a firearm, including TSA requirement warnings and how to pack ammunition
Driving with a firearm
Two Knowledgeable Attorneys Explain State Law Issues When Traveling
In this video U.S. LawShield Independent Program Attorneys Richard Hayes and Emily Taylor provide essential information for traveling with firearms. Discussion includes essential information needed to stay safe and responsible while traveling with firearms.
Know the Laws of Every State You Travel Through
“There is no standardization of gun laws within the 50 individual states, so even if a state recognizes your handgun license or permit, they may have additional restrictions on certain types of firearms, magazines, or ammunition,” said Evans. “In some states, it’s illegal for a non-resident to possess a firearm in the passenger compartment of their vehicle. And, because you are subject to a state’s laws when you are in that state, if you break their laws, you could be committing a crime — whether you think you intentionally broke the law or not,” he added.
“Remember, not knowing the law is not a valid defense,” stated Evans. “Use our Travel Guide for Gun Owners for whatever state you’re traveling through, and learn which states honor your carry license or permit before you go.”
The 22BR cartridge is viewed by many as primarily a varmint round. However, with modern, high-BC bullets, it offers excellent long-range performance. With high-BC 80-95gr .22 caliber bullets, the 22BR can excel in a variety of shooting disciplines. Here we feature the Tubb 2000 rifle of Clint Greenwood. Clint did his load testing with the 90gr JLK (Jimmy Knox) VLDs, but now the new Sierras promise to rival the performance of the JLKs with readily-available factory bullets. That’s good news for long-range shooters since we’re told Jimmy is retiring from the bullet-making business.
A ‘New Twist’ on the Tubb 2000
A few seasons back, Texan Clint Greenwood let us know about a 22BR project he had in the works. We were intrigued by the potential of 90gr bullets in this cartridge. Clint reports: “I got involved with the 22BR after working with its parent case, the 6mm BR Norma. I became interested in the 6BR about three years ago. I had read everything I could find concerning the 6BR, particularly several of Larry Bartholome’s Precision Shooting articles. I was convinced that I just had to have a 6BR, so I took a Rem 700 short action that I had and sent it off to Greg Tannel for some work. While waiting for the rifle to return, I succumbed to the fever and purchased a Tubb 2000, also in 6BR. Both of these rifles were outstanding. It was harder to find a load that didn’t work in the 6BR than to find one that did.
I devote most of my shooting time to High Power XC, but shoot the occasional prone match. My home club was constructing a 1000-yard range and would shortly begin shooting monthly 1000 prone matches. I had originally planned to shoot one of my 6BRs in the prone matches, but a friend that I shoot with, also a 6BR fan, had recently built a bolt-gun in 22BR, and was really pleased with it. We talked at length about his rifle. He had Dave Kiff grind a reamer that would allow him to neck down Lapua 6BR brass to 22 BR and not have to neck turn. His rifle was barreled with a 7.7-twist Kreiger, and he was having great success shooting the 80 Sierra MK across the course.
Better BC for Service Rifle Competition I am primarily a Service Rifle shooter, shooting an AR. Being aware of the self-imposed limitations of shooting the AR Service Rifle, particularly at long range, I had always endeavored to gain every advantage for myself. When the .224 90gr Jimmy Knox (JLK) VLDs came out… I jumped on the bandwagon with a passion. I was easily able to obtain 2750 FPS with the 90 out of the tiny .223 case using VV N540, moly and CCI 450 primers. This familiarity with the quirks of the 90 JLK led me to build my wife a prone rifle in .223.
I had John Holliger chamber a 30″ PacNor in 1:6.5″-twist for the rifle. John Holliger is absolutely the guru for 6.5-twist barrels, having pioneered them. I have had a half-dozen 6.5-twist PacNors that John has done, and every one has been a hummer. Using the 30″ barrel, I was able to push the 90gr JLK to 2900 FPS with no problems. The 90gr JLK’s BC has been listed from .560 to .590, and pushing it at 2900 fps, it was obvious that, as far as a .22 was concerned, the 90gr JLK was the best wind-bucking bullet [available at the time]. [Editor’s NOTE: There are now other high-BC .22 caliber bullets from Berger, Lapua, and Sierra].
Several factors converged at once to finally turn on the dim 10-watt bulb in my head. I had a large supply of Lapua 6BR brass, several thousand 90gr JLKs, a friend with a 22BR reamer for loan, and a gunsmith that really knew his way around 6.5 twist PacNor barrels who also made T2K barrels. I was doomed! Holliger chambered a 30″ 6.5-twist PacNor for my T2K, using my friend’s reamer. I was busy getting tooling ready. When the barrel arrived, I removed the 6BR barrel off of my T2K, and screwed the 22BR barrel on.”
22BR Cartridge Basics
The 22BR is a simple wildcat formed by necking-down 6mm BR brass. Case forming is easy — just run a 6BR case through a 22BR sizing die. With custom bullets, the 22BR has done well in NBRSA short-range Benchrest. Accuracy is on a par with 6mm BR out to about 250 yards, but from there, the 6mm VLDs, with their high BCs, buck the wind better. The 22BR with 90gr bullets offers very impressive ballistics, with less recoil than you might experience shooting a 6BR or 6mm Creedmoor with 105-110gr projectiles.
Forming the 22BR Case
Forming 22BR brass is not complicated. Starting with 6mm BR cases from Peterson or Lapua, you simply run the case through a 22BR full-length sizing die. Be sure to outside-chamfer the case mouths first and lube the case necks and body.
To reduce run-out, half-way through the stroke back out the case and rotate it a half-turn. Then finish by running the case all the way up into the FL die. You can also use a bushing neck-sizing die, but it goes more smoothly if you use an intermediate bushing, then do a second pass with your final bushing. (Or, if you have a Redding 22BR die, using it first will reduce the neck enough to finish with a single bushing.) Using a full-length sizing die is the better method, as the bushings tend to push brass down to the neck-shoulder junction (NSJ). With either method we suggest you run a mandrel down the necks after necking down, and neck-turn the last .050″ or so of the neck and slightly up into the shoulder. This will remove any bulge at the NSJ, and help prevent doughnut formation. And remember to load a few dummy cases before you spec the neck diameter for your reamer to ensure your cases will chamber without further neck-turning.
Load Development for the 22 BR
After necking down the brass from 6mmBR, Clint used a K&M neck turner to remove the doughnuts formed when necking down. He ran the turned brass back through the sizer die, with no expander, and then inside-neck-reamed with a .221 reamer. Then, as a last step he used a mandrel to expand the necks, using two different mandrels to obtain some cases with .004 and some with .002 neck tension.
Clint reported: “I talked with Wes Grass, who had been playing with the 22BR and the 90 JLK. He opined that Varget, while a stellar powder in the 6BR, was simply too fast for the 22BR pushing the 90-grainer. Wes suggested trying VV N550, of which I had a supply. I loaded incremental loads of 0.5 graina of Varget and N550, in the two different sets of neck-tensioned cases. Being familiar with the 6BR, and having spoken with Wes about his loads, I began the Varget loads at 30.0 going up to 32.0. The N550 started at 30.0 also, and went up to 31.5.” Here is a table with the loads Clint worked up using the 90gr JLK:
VARGET Charge
Velocity
Extreme Spread
Std. Dev.
30.5
3022
14.3
6.2
31.0
3091
28
11.5
32.0 Ejector marks — too hot
3185
2.5
2.2
Vihtavuori N550 Charge
Velocity
Extreme Spread
Std. Dev.
30.0
2861
60.9
27
30.5
2930
46
16.5
31.0
2960
33
12.7
31.3 — Match Load
3050
22
9
31.5
3062
10.5
4.9
Clint noted: “All of the above loads used Lapua 6BR brass, neck turned and reamed, .004 tension, CCI BR4 primers. (I did settle on .003 neck tension). These loads were OK in my rifle. Reduce at least 10% before using them! [EDITOR’S NOTE: If you start about 10% under these loads, that should be a good beginning point for using the 90gr Sierra Match-King in a 22BR.]
Final Thoughts on Bullets, Powder and the 22BR
Clint Greenwood found that his 90gr JLK .22 Caliber worked best in his barrel seated well into the lands. You may get different results with different brands of VLD bullets or hybrid bullets. We recommend trying different seating positions and evaluating what works best.
Clinet explained his load development using 500 series VV powder. He observed that he had to get the pressures up pretty high. With higher pressures, “the groups will suddenly shrink dramatically. When you reach the operating pressure for the 500 series of powder, groups shrink dramatically, as if a light switch has been thrown.”
Working up the loads for the 22BR didn’t yield any surprises with the components that I had chosen. At 30.5 grs, the VV N550 loads began to really group into knotholes. 31.5 grains of N550 yielded some pretty impressive groups, as well as chrono numbers that were encouraging. I decided to back off 0.2 grains, as shooting in South Texas, I might be shooting these loads anywhere from 45 degrees to 110 degrees. The VV 500 series is fairly temperature insensitive, not as good as Varget, but decent, but on a few occasions in the past I have had a few “pressure excursions” that were unsettling in .223, and didn’t want to go there with my T2K. Dropping the loads 0.2 grains didn’t appear to change the accuracy and gave me a little insurance. At 200 yards, the warmer N550 loads were consistently under 1/2 MOA. I expect a bit better results when I use the fireformed brass, instead of the new Lapua that was sporting .010″ runout.
I am really pleased with the accuracy of my T2K in 22BR. I have to give most of the credit to John Holliger. If he hadn’t gone out on a limb and experimented with the PacNor 6.5 twist .22 barrel, none of this would have been possible. Good Luck, and remember to work up to these loads! — Clint Greenwood
David Tubb Explains T2K Stock Adjustments
I advocate setting stock length a little longer than most people might. I am a firm believer that it is best to “reach” slightly for the pistol grip as this ensures a strong, secure hold on the rifle. I pull the rifle firmly into my shoulder pocket when shooting offhand, and also prefer to have what I would characterize as very firm contact between rifle butt and shoulder in the sitting and prone positions as well. When using a sling in prone or sitting, stock length (and sling tension) should be great enough so that, at the least, you have to push the buttpad forward with your hand in order to place the stock into the shoulder pocket. My buttstock is shortest offhand and longest prone. If my standing setting is “0”, I’m usually out about 1-1/2 inches for sitting and about another inch for prone. I have found that many people tend to shoot with a stock that’s too long in sitting and too short everywhere else.
I have found the cast off/on adjustment feature on the buttstock greatly helps in attaining the natural shooting positions I desire. For prone, I offset the clamping block so the buttplate moves outward [the index mark on the clamp is to the right of center on the scale on the receiver extension tube]. I swing it a little bit inward for offhand and slightly more inward for sitting. The amounts of cast on/off (in clock-face terms) are approximately 6:30 for standing, 4:30 for prone, and 8:00 o’clock for sitting.
Stock Length Adjustment Procedure
The buttstock is adjustable in length 4-plus inches. This adjustment is accomplished by moving the buttplate tube in or out after loosening the four screws on the clamping block. Ensure that the buttstock tube is fully contained in the block. The extent of rearward (lengthening) movement is determined by the front of the buttstock tube fitting flush with the front of the block.
Cast and Cant Adjustment Procedure
The buttstock is adjustable for cast or offset by loosening the four screws on the clamping block and swiveling the block on the receiver extension tube. The buttplate itself is adjustable for cant up to 360 degrees and after loosening the screw directly in the center of the rubber recoil pad is adjustable for height at approximately 1-1/2 inches. The cheekpiece is adjustable vertically approximately one inch. The vertical cheekpiece adjustment is accomplished via the top knurled ring. The lower knurled ring will then secure the setting.
For more information on the Tubb 2000 Rifle and SSS Accessories, contact:
Superior Shooting Systems
Maker of Tubb 2000 Accessories,
and DTAC Bullets and Brass DavidTubb.com
“God could not be everywhere, and therefore he made mothers.” — Rudyard Kipling
Today, May 14, 2023, is Mother’s Day. There are more than 85 million mothers in the United States, and today is the day we recognize all those ladies who brought life into the world.
Mothers deserve our praise, our devotion, and our concern for their health and happiness.
Be good to your mother, cherish her, and love her without fail… always. In her latter years, attend to her needs, help her with her health, and take time to bring brightness (and laughter) into her life. Let her know that you appreciate all the sacrifices she made, and that you are grateful for all that she did for her children and family.
This Mother’s Day tribute was created by a man who had lost his mother. It will help all of us appreciate all the things our mothers did for us.
Here are some quotes for Mother’s Day:
“Only mothers can think of the future — because they give birth to it in their children.” — Maxim Gorky
“Men are what their mothers made them.” — Ralph Waldo Emerson
“Such a mysterious business, motherhood. How brave a woman must be to embark on it.” ― M.L. Stedman
“All that I am or ever hope to be, I owe to my angel mother.” ― Abraham Lincoln
The NSSF (National Shooting Sports Foundation) has announced that firearm and ammunition manufacturers topped $16.1 billion in excise tax contributions to the Wildlife Restoration Trust Fund since its inception in 1937. When adjusted for inflation, the total is more than $25 billion. The latest Firearms and Ammunition Excise Tax (FAET) Collection report released by the Department of the Treasury, covering the 4th Quarter Calendar Year 2022, indicates that firearm and ammunition manufacturers contributed more than $235 million, the third-highest fourth calendar-quarter in history.
The notable $16.1 billion in overall Firearm and Ammunition Excise Tax contributions represents more than $1 billion contributed to conservation since crossing the $15 billion threshold just 12 months ago.
These 10-11% excise tax dollars collected since 1937 under the Pittman-Robertson Federal Aid in Wildlife Restoration Act are specifically designated to be used by state wildlife agencies for conservation and related purposes. Collectively, purchasers of firearms and ammunition, hunters, and the firearms industry represent the greatest source of wildlife conservation funding.
NSSF President and CEO Joe Bartozzi stated: “The firearm and ammunition industry understands [that] wildlife and the habitats in which they thrive are invaluable. They are critical to future generations taking part in hunting and the recreational shooting sports traditions and learning about their vital importance. The Wildlife Restoration Trust Fund, funded significantly by taxes paid by firearm and ammunition manufacturers, is responsible for the restoration and recovery of America’s iconic game species across the country, including the Rocky Mountain elk, whitetail deer, pronghorn antelope, wild turkey and a variety of waterfowl. These contributions have also facilitated the remarkable recovery of the majestic American bald eagle, of which there are now more than 316,000 in the lower 48 states. The firearm and ammunition industry is [proud of] the role our industry plays to ensure America’s wildlife is perpetuated for future generations.”
The Wildlife Restoration Trust Fund, commonly known as the Pittman-Robertson fund, is funded by excise taxes paid by firearm and ammunition manufacturers on their products, as well as archery equipment manufacturers. The excise tax is set at 11 percent of the wholesale price for long guns and ammunition and 10 percent of the wholesale price for handguns. The excise tax, paid by manufacturers and importers, applies to all firearms produced or imported for commercial federal law enforcement sales, whether the purpose is for recreational shooting, hunting or personal defense. The tax is administered by the Alcohol and Tobacco Tax and Trade Bureau (TTB) of the Department of the Treasury, which turns the funds over to the U.S. Fish and Wildlife Service (USFWS).
USFWS deposits the Pittman-Robertson revenues into a special account called the Wildlife Restoration Trust Fund administered by the USFWS. These funds are made available to states and territories the year following their collection based on a statutory formula.
Three-Position Air Rifle (3PAR) shooting is the most popular and fastest-growing form of shooting sports competition for junior shooters (High School age and younger). The Civilian Marksmanship Program (CMP) conducts two primary Three-Position Air Rifle events. First, Precision Air Rifle is modeled after Olympic-style shooting and allows the use of specialized target rifles and equipment. Second, Sporter Air Rifle is designed for new competitors or those who desire to compete with a minimum of equipment and expense.
In both types of shooting, competitors fire at targets at a distance of 10 meters in three different positions, prone, standing and kneeling. Three-Position Air Rifle provides young competitors with competitive shooting sports opportunities that can be offered on a wide variety of easily accessible or easily constructed ranges, with equipment that is commonly available at affordable costs.
The CMP actively promotes Three-Position Air Rifle shooting as a premier youth marksmanship competition by providing low-cost equipment and pellets as well as training materials and competition activities. In addition, other air gun events for juniors and adults are hosted by CMP throughout the year. CMP facilities have Open Public Shooting evenings, and matches for air rifle and air pistol take place at the CMP Marksmanship Centers. CMP ranges are equipped with OpticScore Targets featuring technology by Kongsberg Target Systems.
The updated Challenger PCP (pre-charged pneumatic) Air Rifle is a preferred .177 sporter class air rifle for competitive marksmanship programs throughout the country, including the Marine Corps JROTC, Army JROTC, Air Force JROTC, Navy JROTC, American Legion, and 4-H. The Challenger is a three-position competition rifle that features a fully adjustable stock, a two-stage, adjustable match grade trigger, a hooded front aperture sight, a micro click, adjustable diopter rear sight, a patented ambidextrous pull bolt, and a floating Lothar Walther™ barrel.
Young American Wins Gold Medal in Air Rifle at 2021 Olympics
William Shaner won a Gold Medal at the 2021 Tokyo Olympics. The University of Kentucky marksman, then age 20, captured Gold in the 10-meter (10m) Air Rifle, setting an Olympic record in the process. Shaner scored 251.6 points in the 10m final to set a new Olympic Record just 1.2 points shy of the world record. Will scored 10.5 or above on 13 of his 24 shots in the final. At the Tokyo Games, William was shooting a Walther air rifle.
Watch Will Shaner capture Gold with a stellar shooting performance, broadcast by NBC Sports:
William hails from Colorado Springs, Colorado. He started his shooting career at age nine in a 4H program in the appropriately named town of Rifle, Colorado.
CMP Records 580+ Entries During 2022 National Air Gun Events at Camp Perry
Air rifle shooting is a very popular activity throughout the nation. Air rifle matches can draw a huge number of competitors. Last summer, the 2022 National Air Gun events, held as part of the Civilian Marksmanship Program’s National Matches, welcomed over 580 air rifle and air pistol entries. The events were held at the Gary Anderson CMP Competition Center at Camp Perry, Ohio.
Gary Anderson CMP Competition Center at Camp Perry.
Special CMP Air Rifles from Anschutz
Back in 2009, the CMP ordered a special run of Anschutz Air rifles. These had laminated wood stocks and the CMP logos on the buttstock.
The CMP currently offers Precision Air Rifles and Sporter Air Rifles for sale via the CMP Website.
CMP Precision Air Rifles from Walther
The new Walther LG400 Bluetec was specifically designed for 3-position air rifle shooting. The barreled action and trigger are the same as the top-of-the-line LG400 models. It comes without an absorber but it can be retrofitted with one. The barreled action will fit into any of the higher end stocks if you wish to upgrade it. The accuracy is the same as the higher-priced LG400s. With a top-tier marksman, this rifle can put 10 shots through the same hole at 10 meters.
The LG400 Bluetec is sold by the CMP with the Walther Basic rear sight, Walther 22mm front sight and a 200/300 bar steel cylinder. The aluminum stock comes with an ambidextrous grip, trigger guard, and an adjustable cheekpiece and buttplate. This rifle is sold by the CMP but shipped via Walther Arms.
Video from the U.S. Army Junior Air Rifle Nat’l Championships at Fort Benning, Georgia. This invitation-only event features top 30 precision and sporter individuals, and top 30 teams in both disciplines.
Sporter Air Rifles
The largest and fastest-growing segment of junior shooting today, Three-Position Air Rifle Shooting, uses a class of target air rifles called Sporter Air Rifles. These Sporters now constitute a special class of junior shooting competition, and are used extensively in JROTC programs.
Sporter air rifles are characterized by their light weight (5-7 lbs.), low cost (from $180 to $600), basic target features (adjustable sights, adjustable length stocks, adjustable sling attachments) and good accuracy (rifles sold through this program must be capable of consistently shooting tens on the standard competition targets).
Shown above is the new Daisy Model 599 10-Meter Competition Air Rifle, a .177-caliber gun that allows competitors to shoot the entire match without having to recharge.
Sierra Bullets has released extensive load data for the popular 6.5 Creedmoor cartridge. This medium-sized cartridge has become one of the most popular chamberings for tactical and PRS shooters. The 6.5 Creedmoor combines excellent accuracy, good mag-feeding, good barrel life, moderate recoil, and reasonable component cost. That’s why this cartridge has caught on quickly, and is now one of the most popular chamberings in factory rifles.
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
Here are three tables from the Sierra Bullets Reloading Manual (5th Edition). IMPORTANT — This is just a sample!! Sierra has load data for many other 6.5mm bullet types, including FB, Spitzer, SBT, HPBT, and Tipped MK from 85 grains to 142 grains. To view ALL 6.5 Creedmoor DATA, CLICK HERE.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
INDICATES MAXIMUM LOAD – USE CAUTION
LOADS LESS THAN MINIMUM CHARGES SHOWN ARE NOT RECOMMENDED.
Two More Great 6.5 Creedmoor Reloading Resources
Want More 6.5 Creedmoor Load Info? View Starline’s 6.5 Creedmoor Guide by Gavin Gear:
PRB 6mm Creedmoor and 6.5 Creedmoor Load Survey
The Precision Rifle Blog compiled Load Data from PRS Competitors, for both 6mm Creedmoor and 6.5 Creedmoor. This is a good place to start. PRB surveyed the match loads for “173 of the top-ranked precision rifle shooters in the country”. CLICK HERE.
Readers who have just recently discovered the Daily Bulletin may not realize that AccurateShooter.com has hundreds of reference articles in our archives. These authoritative articles are divided into multiple categories, so you can easily view stories by topic (such as competition, tactical, rimfire, optics, shooting skills etc.). One of the most popular categories is our Technical Articles Collection. On a handy index page (with thumbnails for every story), you’ll find over 100 articles covering technical and gunsmithing topics. These articles can help you with major projects (such as stock painting), and they can also help you build more accurate ammo. Here are five popular selections from our Technical Articles archive.
Stress-Free Pillar Bedding. Richard Franklin explains how to do a top-quality bedding job, start to finish.
OnTarget Software Review. Our Editors test free software that measures shot groups with great precision. We explain how to use the program and configure advanced features.
Savage Action Tuning. Top F-TR shooter Stan Pate explains how to enhance the performance of your Savage rifle by optimizing the torque settings of the action screws.
Complete Precision Case Prep. Jake Gottfredson covers the complete case prep process, including brass weight sorting, case trimming, primer pocket uniforming, neck-sizing, and, case-neck turning.
Stock Painting Instructions. Step-by-step guide for stock painting by expert Mike Ricklefs. Mike shows both simple coverage and fancy effects.
Last week, oppressive legislation was re-introduced in Congress that would ban and confiscate all suppressors (aka “silencers”) in all 50 states. This sweeping suppressor ban is the work of two Democratic party lawmakers, U.S. Sen. Bob Menendez (D-NJ), and Rep. Bonnie Watson Coleman (D-NJ). This unconstitutional legislation is called “HEAR Act”. HEAR stands for “Help Empower Americans to Respond”. The deceptive name falsely suggests this statute was in some way designed to protect hearing or reduce noise pollution.
Just the opposite is true. This misguided legislation would prohibit the importation, sale, manufacturing, transfer, and possession of suppressors. The object is both to ban suppressors AND to confiscate currently-owned suppressors. As GunsAmerica Digest explains: “Emphasis was added on ‘possession’ for the obvious reason. It means even current can owners would be affected!”
Senator Menendez, in a press release, argued that suppressors are very commonly used by criminals, something which is completely and totally false. The mendacious Menendez stated: “Gun silencers are devices designed for a very specific purpose — to suppress the sound of gunfire from unsuspecting victims and reduce the chances they can run, hide, take cover, and call the police during an active shooter situation. [This] legislation that would prevent armed assailants from using deadly devices that only make incidents of gun violence all the more dangerous.”
Sen. Menendez has an interesting reputation in Washington. He was indicted in 2015 on bribery charges, and stood trial in 2017, resulting in a hung jury. And, according to the N.Y. Times and Politico, he is currently under investigation for more questionable practices. SEE N.Y. Times Report.
The sponsors of the legislation do not acknowledge that there is a complex, and expensive process to acquire a suppressor, involving background checks, ATF paperwork, and a costly $200 Tax Stamp. As usual, these Democrats ignore the facts and push legislation based on fraudulent assertions.
Rep. Bonnie Watson Coleman attacked the use of silencers, completely ignoring how they are safely used by hunters and sportsmen throughout the world. Coleman states: “Silencers are not tools of self-defense, they are tools of murder. They have no legal application, which is why law enforcement officials around the country have called for their elimination.”
The HEAR act would ban all future sales of suppressors. In addition, the law would allow confiscation of existing suppressors via a buy-back program using Byrne JAG grants. Current suppressor owners would have a 90-day grace period after the date of enactment to surrender their silencers/suppressors.
GunsAmerica Digest notes: “Not surprisingly, the legislation is backed by a collection of the usual suspects.”
U.S. Senators who are listed as HEAR Act co-sponsors include: Dianne Feinstein (D-Calif.), Ed Markey (D-Mass.), Richard Blumenthal (D-Conn.), Tim Kaine (D-Va.), Alex Padilla (D-Calif.), Mazie Hirono (D-Hawaii), Cory Booker (D-New Jersey), and Sheldon Whitehouse (D-R.I.). Every one is a Democrat.
In the House of Representatives, HEAR Act cosponsors include Reps. Jasmine Crockett (D-Texas), Rashida Tlaib (D-Mich), Eleanor Holmes Norton (D.C.), Wiley Nickel (D-N.C.), Glenn Ivey (D-Md.), Barbara Lee (D-Calif.), and Adriano Espaillat (D-N.Y.). Again all the co-sponsors are Democrats, including some of the most radical legislators in Congress (such as Rashida Talib).
The America Suppressor Association (ASA) has condemned the reintroduction of the HEAR Act.
“ASA is unequivocally opposed to any attempt to ban suppressors. We are unwavering in our support of the Second Amendment and the individual right to possess suppressors. We will fight this tooth and nail. With the facts on our side, we will succeed.”
Read HEAR Act Text Banning Suppressors and Authorizing Confiscation:
We know many of our readers are getting older and are not as flexible as they once were. If you shoot prone with sling, or do position shooting, you can definitely benefit from doing some key stretches on a regular basis. This can help avoid cramping, muscle pain, or unwanted tension. In addition, doing stretching exercise can help with general health and fitness.
Shooting Sports USA has a good fitness article: Easy Stretches And Strength Movements. While the main focus of this article is on strethces to alleviate lower back pain, many of the movements illustrated can help ease neck, shoulder, and mid-back tension. This Editor, who suffers from neck/shoulder tension, can confirm that these exercises really do help. NOTE: The lead photo above shows the Floor Pec stretch (left) and Pigeon stretch (right), referenced below.
The article’s author, Corey Howard, explains:
Let’s look at the simple stretches … to maintain a healthy range of motion in your four corners — your hips and shoulders. If any of these areas are tight, then nine times out of 10, your body can’t stabilize and you’ll have low back issues.
There are four simple yoga stretches I have all my clients do: child’s pose, floor pec stretch, half kneeling hip flexor, and pigeon. These are simple and can be seen in the photos. The child’s pose lengthens the spine and stretches the lats, the big muscles in your upper back. Pec stretch on the floor opens up your chest and relaxes your shoulders so your posture improves. Half kneeling hip flexor stretch should be felt on the front side of your hips and ease the strain on your lower back. Finally, pigeon stretch can be felt through your glutes and will ease any lower back discomfort.”
Good Basic Stretching Routines — Video Instruction
Here are two videos that offers some other stretching techniques that can help older marksmen. This Editor started doing some of the listed morning stretches. Right away this helped to significantly reduce stiffness associated with working at a computer all day long.
And here is a more aggressive stretching routine that includes some of the stretches found in the Shooting Sports USA article. For older readers — you may want to just do a few of these stretches for starters — not the entire routing.
Jason Baney was one of the “founding fathers” of this website when we started out as 6mmBR.com 18 years ago. A few seasons back, Jason created an interesting wildcat, a mid-sized 7mm cartridge based on the 6.5×47 Lapua case. In this report, Jason (who now works at Eurooptic.com) talks about his 7×47 wildcat and his initial velocity (and feasibility) tests. To determine the 7×47’s velocity potential, Jason did a multi-stage test, cutting a barrel in two-inch increments. This process is illustrated in a video, embedded below.
You may be surprised that the little 7×47 cartridge could drive a 180gr Berger Hybrid at 2770+ FPS with a 32″ barrel and Reloder 17. Max Velocity with H4350 (and 32″ barrel) was roughly 70 FPS slower. With a 24″ barrel length, the 7×47 was still able to propel the 180gr Hybrids over 2600 FPS with H4350. That’s impressive performance for a mid-sized cartridge pushing a very big bullet.
7×47 Lapua Wildcat — Great Accuracy and Surprising Velocity
By Jason Baney, Eurooptic.com
The biggest enemy in long-range shooting is wind. This also happens to be the hardest to gauge and predict. The only way mere mortals can attempt to defeat the wind demons is to shoot a cartridge with the most ballistic efficiency, yet maintain a user-friendly combination of recoil and component consumption as well as performance on target.
The 7mm bullets tend to yield the best compromise of all of these aspects. Their BC-to-weight ratio is outstanding and 7mm bullets provide sufficient impact energy for most situations. In addition to that, the recoil of 7mm bullets can be more manageable than heavier/larger .30 and .338 caliber projectiles.
In cartridge design, of course you want the best case possible. Having used the 6.5×47 Lapua since its release in 2006, I felt this cartridge was the perfect choice to start with as I wanted a true short-action non-magnum round that gave the least possible wind drift to 1000 yards. The 6.5×47 parent case also allowed seating of the heavy 180gr class bullets completely out in the neck yet it maintained an overall length that would actually work in a factory Remington short action magazine.
The 6.5×47 brass from Lapua is as good as it gets and is a very efficient case. The small primer pocket has been a proven winner so no need to change anything. This combination has always given reliable precision and extremely tight velocity spreads.
So here I was, ready to expand a 6.5×47 Lapua to 7mm but a web search revealed no info on a 7×47 wildcat, so test loads would be based purely on an educated guess. My initial assessment/prediction was that heavier 180gr bullets in the larger 7mm caliber would end up at a max load very close to a 140gr bullet in the parent 6.5 caliber. This actually turned out to be a very accurate assumption.
The performance goal of this cartridge was to get a 180gr Berger Hybrid moving at 2720 FPS or faster to be able to shoot inside of a 6.5mm 140gr Berger Hybrid at 2900 FPS. (That 2900 speed is what I was able to achieve with the standard 6.5×47 Lapua). I also planned to try the 168gr VLD as well as the 180gr Lapua Scenar and 162gr Amax, but the specific goal was the beat the 6.5 140gr bullets at 2900 FPS. I believed the 180 Hybrid at 2720 FPS would be the easiest way to accomplish this.
Here are Summary Test Results for H4350 and Reloder 17 for 180s, and IMR 8208 for the 168s. Speeds were clocked by two chronographs at nine (9) barrel lengths, 32″ to 16.1″.
Since this cartridge was a complete unknown I thought it would be quite interesting to see what the 7×47 could achieve at various barrel lengths from very long to very short. We wanted to see which length would best suit the bullet/cartridge combination for max performance. Obviously testing 8-10 barrels at different lengths would be pointless due to natural performance variations between barrels, not to mention expensive and wasteful. I decided instead to attempt a fairly radical test and cut a barrel from 32″ down the 16.1” while chronographing the same loads along the way to see what each combination delivered at the different lengths.
Before I could get started of course a reamer and dies and a few other parts were needed. Dave Kiff at Pacific Tool and Gauge was excited to get going on the project so soon after our phone conversation my one of a kind reamer arrived. Since I had been using Forster dies in the 6mmx47 Lapua and 6.5×47 for all these years, I contacted my friend Bob Ruch at Forster and he was willing to make me a few sets of special dies for the project. Lapua of course provided some brass for the project and Rock Creek Barrels sent a beautiful 1:8.7″-twist 5R barrel blank as a sacrificial lamb. The gunsmith I chose for the chamber job on this project needed to be a tactical long range rifle shooter to appreciate the capability of the round all the way down to its 16.1” barrel length so I asked my good friend Wade Stuteville from Stuteville Precision to help me out.
The rifle I selected for the test was Accuracy International’s new AT rifle. This rifle is basically an overhauled and updated AI AW with a quick user-changeable barrel. I can literally change a barrel in 1 minute or less. The machining they have done to give this function was quite simple and brilliant in the way it retains the barrel yet allows the release quickly and with only a 4mm Allen wrench. This would make the test that I contrived go very smoothly as no major tools were needed.
My goal was to use as many different load combos for the test as I could without making it extremely cumbersome to complete. I wanted to test at least the 180 and 168 Berger as well as a couple different powders representing different burn rates to get an all-around feel for how the cartridge would behave at the different lengths. From previous experience with the 6.5×47, the best powder choices were Hodgdon H4350 and Alliant Reloder 17 (RL17) so these would be the main players. I also picked IMR 8208, Varget, and VV N550 to cover the spectrum of acceptable burn rates. Also, my standard CCI 450 primer was used as that has been successful for me in the 6mmBR and 6.5×47 since 2006 as they are incredibly consistent, however they are also better able to take high pressures without blanking. After picking the powders, I first ran ladder tests to assess max loads in the long 32” barrel.
Velocity Study — Chopping the Barrel from 32″ to 16.1″
Laying out the test actually took a bit of bit of mental gymnastics to provide randomness. The barrel was to be cut in 2” increments from 32” down to a final of 16.1”. Each length was actually pre-scored by Wade to make cutting easier to start and was actually 1/8” long at each mark so when I finally ended up at 16 1/8”, I was able to have the barrel re-crowned without going below legal length.
Six loads were assembled using the five powders mentioned above and two bullets (Berger 168gr VLD and 180gr Hybrid). Each set of rounds to be fired at each cut was predetermined and laid out so that the same load never preceded nor followed another more than once. Reloder 17 and H4350 loads were fired at each cut, while the four others were fired at every-other cut to keep the round count under 200. Twenty rounds (4 loads times 5 rounds each) were fired at each cut from 32” down to 18” and at the final 16.1” length each of the six loads was fired. That is a total of 190 test rounds. The barrel was cleaned before firing at the 24” length and before firing at the 16.1” length. After cleaning each time I fired two rounds of the next load as fouling shots to normalize velocities.
The rifle was fitted with a 3” fore-end attachment and fired from my 40-lb front rest for 1000-yard benchrest competition with a rear bunny-ear bag. Throughout the test, the rifle never changed its position — though the muzzle did retreat 2” with every cut. I used two chronographs for the test. An Oehler 35P was placed 10 feet from the original 32” muzzle and a Magnetospeed V3 was attached on the muzzle (at all barrel lengths down to 16.1 inches.)
After every round of firing, the barrel was removed and we poured cold water on the exterior only and wrapped a wet towel around it to speed cooling. While the barrel was cooling we used a couple C-clamps and a 2×4 to create an impromptu barrel vice to hold it while we were cutting. While it was clamped, we used a simple hacksaw to cut off two inches and crowned the barrel with an RCBS deburring tool for a nice finish. It took an average of two minutes to cut through the barrel at each length.
OBSERVATIONS:
Throughout the test, the rifle lost 3.2 lbs on its way to 16.1 inches. The recoil and muzzle blast increased dramatically from 32″ down to 16.1″. Groups on target were actually quite impressive given that we were not really trying for absolute precision and we had rough-cut crowns. Many groups formed one large hole and several were half-MOA or better – even at the final 16.1″ length.
Each load lost between 12.25-16.8 FPS per inch (loss per inch – LPI) over the entire test, though the rate of the loss varied by the burn rate of the powder and by barrel length. Generally below the 24” barrel length the LPI accelerated rapidly. Initial LPI at the longest lengths was 0-10 FPS, while the loss per inch at the shortest lengths were much higher at 30-55 FPS!
In general I did not quite achieve the velocity I was hoping for, but am very close and intend to test longer throats and different throat geometry to get where I want to be. Below I will break the attainable performance down into 3 barrel lengths for consideration in different disciplines.
APPLICATION ONE: 28-30” Barrel for 1000-Yard Benchrest:
Since I am close to or past my target velocity at the longer lengths (above 2720 FPS with the 180gr Berger Hybrid), I intend to barrel a 1000-yard Benchrest rifle in this caliber and give it an honest try in 1K benchrest. I feel that, with a 28-30″ barrel length, my goal will be attainable and it will pull away from 6.5mm class rounds in the wind drift department. While there will be a slight recoil increase, in a 17-lb rifle it is not a concern. There will also surely be a significant gain in useful barrel life as well.
According to Kirk Evans, President of U.S. LawShield, “Because there are so many details for people to understand before they leave home, we developed state-specific guides to help folks stay on the right side of the law. Take the time to learn the laws before hitting the road because they are not the same everywhere. Don’t wait until after the fact to plan for your guns when preparing for your trip.”
Better BC for Service Rifle Competition
The 22BR is a simple wildcat formed by necking-down 6mm BR brass. Case forming is easy — just run a 6BR case through a 22BR sizing die. With custom bullets, the 22BR has done well in NBRSA short-range Benchrest. Accuracy is on a par with 6mm BR out to about 250 yards, but from there, the 6mm VLDs, with their high BCs, buck the wind better. The 22BR with 90gr bullets offers very impressive ballistics, with less recoil than you might experience shooting a 6BR or 6mm Creedmoor with 105-110gr projectiles.
Today, May 14, 2023, is Mother’s Day. There are more than 85 million mothers in the United States, and today is the day we recognize all those ladies who brought life into the world.
Developed in 2007 by Dennis DeMille and Dave Emary, the 6.5 Creedmoor is a shortened and improved 30 TC cartridge case that was inspired by the .308 Winchester design. This short action design was created to maximize case capacity and a wide range of loading lengths, while still fitting in standard short action magazines. With the correct twist barrel, the versatile 6.5 Creedmoor can take advantage of the wide range of bullet weights available in 6.5 mm (i.e. .264 caliber). Reloaders should keep in mind that the 6.5 Creedmoor works best with medium to medium-slow powders such as H4350, Varget, Win 760, and RE-17. The light recoil and adaptability of the efficient 6.5 Creedmoor cartridge has already proven itself in high power, precision rifle series and benchrest competitions. Couple that with respectable barrel life and its intrinsic accuracy potential and you have a recipe for success which should insure its legacy for decades to come.
Rep. Bonnie Watson Coleman attacked the use of silencers, completely ignoring how they are safely used by hunters and sportsmen throughout the world. Coleman states: “Silencers are not tools of self-defense, they are tools of murder. They have no legal application, which is why law enforcement officials around the country have called for their elimination.”
