Today we feature a modern switch-barrel PRS chassis rifle set up for quick changes between 6mm Creedmoor and 6.5 Creedmoor barrels. The owner, Forum member Jeff Cosgrove (aka “Punkur67″) uses the 6 CM barrel for competition, favoring the reduced recoil over its 6.5 mm big brother. He does use the 6.5 CM barrel for practice (given its better barrel life). The 6.5 CM barrel also gives him the chance to shoot a variety of factory 6.5 Creedmoor ammo.
- Terminus Zeus action with Quick Change (QC) barrel option.
– 6mm Creedmoor Pre-Fit Bartlein Heavy Varmint 400MODBB barrel for matches
– 6.5 Creedmoor Pre-Fit Benchmark Heavy Palma barrel for training
– MPA BA Competition chassis with full weight kit
– Zero Compromise Optic ZCO 5-27x56mm FFP scope
– TriggerTech Diamond trigger
This rifle represents an evolution for Jeff. Each step along the way in his PRS journey, he has learned more about what he wants and needs in a competition rifle. And what you see here, from the $3760 ZC527 scope to his high-tech reloading equipment, represents pursuit of excellence. Jeff even created a modern, spacious man cave/reloading center in his new house (photos below).
Quick-Change Barrel System with Terminus Zeus QC Action
This rifle has two pre-fit barrels that work with the Terminus Zeus QC Action for fast and easy barrel swaps. To remove a barrel, you simply release two tension screws on the front of the action and then unscrew the barrel. To swap in a different pre-fit barrel, reverse the process and then tension the screws. The Terminus Zeus is 3-lug receiver with 60° bolt and integral recoil lug. Both the receiver and bolt are DLC-treated. Jeff reports this action is extremely smooth and has met all of his expectations. Some other Zeus features are threaded trigger pins for quick/easy trigger installation, and a roller-tipped cocking piece.
PRS Discipline Offers Fun, New Challenge for Long-Time Shooter
My name is Jeff Cosgrove, I live in Winchester, California and do commercial heating and air conditioning. I have shot for 20+ years but I found my interest in shooting was dwindling over time. I got somewhat bored with shooting paper at 100 yards or plinking cans out in the desert. About 18 months ago I decided I wanted to shoot long range. I picked up a used MPA in .300 Winchester Magnum and started shooting long range with a new buddy. That day I fell in love with guns all over again with more intensity than ever.
How I Got Started in PRS
With that new .300 WM I soon found my reloads were not up to my expectations (high ES/SD), so I purchased all new reloading hardware. One of my purchases was a used Benchsource Annealer. The guy I bought that from asked if I had ever tried PRS and he invited me to check out a match. So I went to a local PRS event as a spectator. I looked at many rigs on the firing line and took notes. By the end of the day I knew this was something I really wanted to do. I then acquired a used chassis rifle that I thought would work well for PRS. I went to a PRS match the following month but shot poorly.
After working with that first PRS rifle, a 6.5 CM with Stiller Tac30 action, MDT chassis, and Proof Carbon-wrapped barrel, I quickly learned that gun did not handle and balance the way I hoped.* It was too light in the front, the ergos were poor, and scope eye relief was not optimal. So I decided to build my own GEN 2 PRS rifle. This is the story of how I put together my new switch-barrel rig that I now use in competition.
PRS Rifle and Gear Selection — Learning What Works
Barrel availability was limited given the current shortages. Luckily I was able to obtain a 6mm Creedmoor pre-fit Bartlein Heavy Varmint 400MODBB from Southern Precision Rifles. The 6mm Creedmoor is notorious for being a barrel burner cartridge so I went with the special 400MODBB metal. Bartlein says that barrel life expectancy is 1.5 to 2 times longer than the standard 416 grade steel. I also purchased a 6.5 Creedmoor pre-fit Benchmark Heavy Palma barrel for training (Source: Straight Jacket Armory). With the Terminus Zeus quick change system I am able to swap from my match barrel to my trainer barrel in just a couple minutes. I loosen two set screws, unthread the barrel, thread the new barrel on, and torque the set screws to 10 inch-pounds. This also affords me caliber options in case I’m in a pinch for ammo. If I have some 6.5 CM loaded up and don’t have time to load 6mm Creedmoor for a match, then I’m covered.
For the trigger, I went with a TriggerTech Diamond Pro curve model. I have Timney, Jewell, and TriggerTech triggers in other rifles. I like them all but I liked the feel of the TT Diamond the best so that is what I used on this build. I set my triggers around 18-20 oz. — I am not a fan of ultra-light trigger pulls.
MPA BA Competition Chassis with Added Weight
I went with an MPA BA Comp chassis with full internal and external weight kit. I also have Gray Ops external weight on the handguard. I had the same chassis on my .300 WinMag and felt very comfortable with it. I took a PR1 class and found that, with a different gun, I had to force a comfortable hand position for proper trigger pull. After that class I grabbed my MPA and my hand fell in to the perfect position. I did not need to hunt or index my hand with the MPA. The built ARCA rail (RAT) lowered the rifles center of gravity more than my old setup with the ARCA rail bolted to the bottom of the handguard. With the current configuration, the rifle weighs in at 24 lbs. and balances three inches in front of the magwell. I now have the flexibility to add, subtract, or move approximately 6 lbs. of weight.
The Attraction of PRS/NRL Practical Competitions
I really enjoy PRS-style shooting because there seems to be a new challenge every time you compete — no matter what. With PRS I am shooting many different positions and ranges with the pressure of a stopwatch. This keeps things interesting for me. I have taken a few training classes to help establish good, clean fundamentals.
Jeff says it is hard to practice for the many unconventional shooting positions at PRS matches.
My biggest challenges so far have been: 1) building stable shooting positions that I have not practiced enough; 2) proper equipment selection; and 3) time management. Regarding the shooting positions — PRS/NRL is not like F-Class where you can always practice from one position. And it’s hard to practice for unusual set-ups (barriers and positions) you’ve not encountered before. Concerning equipment — you need some experience in the game to determine what really works best for you.
Innovative Zero Compromise Optic — Optimized for the Tactical Game
The scope is a Zero Compromise ZC527 (5-27x56mm FFP) with MPCT2 reticle. Zero Compromise Optic is a relatively new manufacturer, but their scopes are top-flight. The First Focal Plane ZCO has excellent glass that is extremely bright and clear. With a big 36mm main tube, the ZC527 offers 35 Mils Elevation and 21 Mils Windage adjustment. The field of view is 21 feet at 100 yards — one of the widest in the industry. The ZC527 also offers illuminated reticle and locking turrets. When I was at my first PRS match I looked through several different scopes. When I got behind a ZCO scope I knew this was what I wanted — the ZCO scope was super clear, super sharp, with very positive controls.
I put a protective wrap on the scope because with some of our PRS stages it is easy to scratch or dent the scope tube. You don’t want to bang up an expensive scope — the ZC527 retails for $3760.
Reloading for 6mm Creedmoor and 6.5 Creedmoor
When starting out with a new cartridge I like to search places like AccurateShooter.com and UltimateReloder.com for popular recipes used by knowledgeable shooters. I am all about paving your own way on certain things but with the consistency, higher cost, and limited supply of components these days I try to stick with the most common loads. I also want to limit barrel wear and get through load development quickly. I don’t want to chase loads for 300 rounds to ultimately land in the same place that so many other people have already found.
I start my new barrels with virgin brass and load three rounds at each charge weight in 0.2 grain increments. I put the most popular charge weight (for my chosen bullet) in the middle of my load range and load above and below to find a good node while paying close attention for pressure signs along the way. I use the 6.5 Guys spreadsheet (see below) to help analyze my results. With those results I like to re-test a narrower range with 5-10 rounds each charge weight in 0.2 grain increments. I again use the 6.5 Guys spreadsheet to make a final charge weight selection and then I move on to seating depth. I will load different depths to tighten the groups up.
Load Development Using 6.5 Guys Custom Spreadsheet
To hold and analyze my load development data I use the spreadsheet from 65Guys.com. It helps a ton with making a decision on your final load. This Excel spreadsheet works great and makes it simple to analyze your data. You can even copy and paste your chronograph data if your chrono logs on to a SD card.
In this 6.5 Guys video Steve provides an overview and tutorial for using the Excel load development analysis model that he has developed. The Excel Load Development Analysis Spreadsheet version 2.0 is FREE. Download from the 6.5 Guys Website.
In this video Steve explains some key statistical concepts for performing load data analysis. He also provides tips and guidance for determining the optimal load for your rifle as you analyze the load data you’ve collected.
New House, New Man Cave/Reloading Room
Jeff recently moved with his family into a great new house. One bonus of this move was that he upgraded from a cramped reloading area to a dedicated “Man Cave” that has ample space for his gun safes, multiple presses, and all his reloading components. Large upper and lower cabinets plus a dedicated “gun closet” provide plenty of storage. Read all about this move in this AccurateShooter Forum Thread.
Here is Jeff’s first reloading area years ago: “My first reloading setup was smashed in my two-bedroom condo so I had a very small bench that was very cluttered. I had to deal with the limited space I had but I made it work. Then in our first house I had a larger bench/cabinet, but it was still not ideal.”
Here is the new Man Cave in the new house — very open, spacious, with plenty of storage.
This animated GIF shows the new Man Cave move-in process start to finish:
How would you like to get rifle and pistol training from some of the best marksmen in the country for a modest charge and ammo included! This summer, the Civilian Marksmanship Program (CMP) will offer Small Arms Firing Schools (SAFS) at the Camp Perry National Guard Training Facility. Choose from pistol, smallbore rifle, rimfire sporter, or service rifle courses. No prior competition experience is required, and the CMP even supplies the guns. For more details on the Small Arms Firing SchoolsCLICK THIS LINK.
2021 Camp Perry Small Arms Firing School Dates:
Pistol: July 13
Smallbore (.22 LR) Rifle: July 20
Rimfire Sporter Rifle: July 24
Service Rifle: July 31 – August 1
REGISTRATION
Registration is now Open. You can register on-line on the CMP web site and make payment via credit card.
The SAFS courses have been a staple at the annual Camp Perry National Matches since 1918, educating over 1,000 pistol and rifle participants each year. Formulated specially to ease in those of who are new to marksmanship, the school is led by members of the U.S. Army Marksmanship Unit along with qualified civilian and military professionals. The minimum age for Pistol SAFS students is 14 while the minimum age for Rifle SAFS students is 12.
Currently, the CMP offers SAFS courses in smallbore rifle (.22 caliber), rimfire sporter rifle (.22 caliber), centerfire service rifle (M16), and centerfire pistol (M9). Since the schools are intended for beginners, no past firearm experience or gun ownership is required to participate. All ammo will be provided by the CMP along with the M9 pistols and M16 rifles. NOTE: Smallbore students can request to borrow a Walther KK300 for the class — send request to bdonoho@thecmp.org.
SAFS utilizes both classroom and live-fire training that covers basic instruction and firing practices as well as a scope of competition skills. Students in the Pistol (M9) and Rifle (M16) courses will also be entered into a true Excellence-In-Competition (EIC) Match. Though firing in the match is not required, it allows participants the chance to earn four EIC leg points toward a Distinguished Badge.
Small Arms Firing School COSTS
Pistol and Rifle: $50.00 for adults, $35.00 for juniors
Advanced Pistol School: $20.00 for adults ($15.00 for juniors)
Smallbore School: $35.00 for juniors
Rimfire School: $35 for adults, $25 for juniors
WHAT YOU GET
For the entry fee(s), students receive:
All instruction
All needed ammunition for the school
Use of an M9 9mm service pistol or an M-16 service rifle (with Walther KK300 for smallbore on request).
USAMU Guidebook for the particular program
SAFS T-shirt
SAFS certificate
NOTE: All Pistol and Rifle SAFS students also receive automatic entry in the M9 Pistol EIC or M16 Rifle EIC Matches at no additional cost, a special EIC match pin and an opportunity to win four EIC credit points.
National Matches 2021 Full Schedule
To view the full schedule of the 2021 National Matches at CLICK this SCHEDULE LINK.
This past weekend, the U.S. Army Marksmanship Unit (USAMU) Service Rifle Team won the 2021 Interservice Rifle Team Championship Match held in Quantico, Virginia. The USAMU squad finished with an impressive score of 4918-185X! This competition features 10-person teams. All the shooters have to perform well to secure the team victory.
This is a tough match, shot with multiple positions at 200, 300, and 600 yards. In this course of fire, all members of a 10-person team complete the following stages:
Stage 1 at 200 yards — 10 standing, slow fire shots with a total time of 66 minutes.
Stage 2 at 200 yards — 10 sitting from standing, rapid fire shots within 60 seconds per shooter.
Stage 3 at 300 yards — 10 prone from standing, rapid fire shots within 70 seconds per shooter.
Stage 4 at 600 yards — 20 prone, slow fire shots with a total time of 126 minutes.
Team members were: Sgt. 1st Class Walter Craig (coach), Lt. Col. Erik Andreasen (captain), Staff Sgt. Erin McNeil (497-21X), Sgt. Brandon Muske (495-22X), Sgt. Jarrod McGaffic (495-18X), Sgt. 1st Class Brandon Green (494-20X), Sgt. Jared Desrosiers (494-15x), Staff Sgt. David Bahten (492-19X), Spc. Kade Jackovich (492-17X), Spc. Luke Rettmer (489-16X) Staff Sgt. Verne Conant (487-13X) and Sgt. Lane Ichord (483-24x).
By earning the top score in this match, SSG Erin McNeil (shown above) also earned the Lt. Col. Reynolds Trophy. SGT Muske placed second in this category. The 2021 Interservice Match at Quantico concludes today with the well-known Infantry Trophy Team Match. See more Interservice match photos at: USAMU Flickr Archive (742 images).
The U.S. Armed Services’ new champion is a young lady. U.S. Army Staff Sergeant (SSG) Erin McNeil claimed the 2021 Interservice Individual Rifle Champion title with an impressive score of 996-52X, beating out 86 other service members. That score also earned Erin the title of High Woman. The 2021 Interservice Rifle Championships (IRC) continued with other events, including the 1000-yard match. Shown below is SSG McNeil competing in the IRC 1K Match.
Staff Sgt. Erin McNeil hails from Fort Wayne, Indiana. She has a B.S. in Mathematics from Texas Christian University (TCU), and holds the military occupational specialty of battle management system operator. With the USAMU, SSG McNeil has served on the International Shooting Team and the Service Rifle Team. As a USAMU team member, SSG McNeil has earned the President’s 100 Tab, Rifleman’s EIC Badge, and Bronze Medal at the 2014 World Championship in 3-Position/50m Smallbore Rifle.
McNeil started shooting through a 4-H program while in the 8th grade and then shot in college with the TCU Rifle Team. Now, she serves as a shooter/instructor on the USAMU International Rifle Team. In the video below, SSG McNeil talks about her career in competitive shooting, and what she enjoys most about rifle competition — both smallbore and High Power. She notes she gets enjoys instructing young high school and collegiate shooters.
Erin enjoys shooting competition because “It’s really between you and the gun. It’s a very mental game. I think shooting is a great sport… as long as you are able to compete within yourself.”
Like Father, Like Daughter — Both Great Shooters
Erin noted: “My father was very influential in my shooting career. As a child, I looked up to him. I knew that he had been a world-class shooter in his youth. He asked me a few times if I would be interested in starting the 4H Rifle program He was excited when I started showing interest in the program. Although he never coached me for fear of crossing the father/daughter relationship with the athlete/coach relationship, but he was always my biggest supporter and even gave assistance when I asked for it. I had a natural talent for shooting and ended up joining my high school’s Army JROTC. I was given a NCAA scholarship; to TCU during my senior year. After completing college, I was accepted into the USAMU. My dad [was] the quiet, proud encourager of my shooting career[.]”
Words of Praise for SSG Erin McNeil from Facebook
“The nice thing about shooting sports is men and women can compete against each other and be on equal footing. Congratulations on the win!” — Doug Fraser
“Congrats Sergeant McNeil from an old shooter from the 1964 ARADCOM Interservice Rattle Battle matches at Fort Carson Colorado, Ft. Campbell, Ft Sheridan, et cetera. You make me proud of all you folks who carry on the tradition.” — Walter Colbert
“I’ve watched Erin shoot while I was calling the matches from the Tower at the Camp Perry smallbore championships. [She was] never bothered and never ruffled. Just keeps shooting those Xs.” — Ken Kelley
For those of us in the Western USA facing drought, heat waves, and forest fires, it is a bit amazing to see a shooting range with verdant green fields, and lush vegetation. Well that is the environment in far-away Queensland, Australia. Here is a photo essay from Aussie Zac Link Cameron who hails from Cairns, Queensland, up near the Great Barrier Reef. On June 20, 2021, Zac was at a scenic range, shooting out to 1000 yards. He posted on Facebook: “Beautiful morning for it at a beautiful range!”
Zac was competing at 1000 yards with his lovely “missus” Morgan Crisp at the Atherton Rifle Club range, situated west of Cairns in Queensland. Zac and Morgan are members of the Cairns Rifle Club, which also has an 800m range north of Cairns, located inland from Wangetti Beach (see map below). Posting on Facebook, Zac wrote: “First time at 1000 yards for the Missus today with her factory Howa 1500 in .223 Remington. Conditions couldn’t have been more perfect other then the swirling wind not making up its mind! But the little .223 did bloody good for its first outing past 800m. 1000 yards today and my gosh Atherton is a beautiful range!”
Zac wrote: “Dropped 2 points on my first target and didn’t drop any on my second. I definitely need to work on my wind reading though.”
Zac Cameron: “Beautiful morning for it at a beautiful range!”
Indeed, this is a beautiful range. It’s great to see all that greenery. Here is a fly-over video from the Atherton Tableland Gun Club Range, west of Cairns, another popular Queensland shooting venue. You can see other Queensland shooting ranges on Zac Cameron’s Long Range Australia FNQ Facebook page.
Australia Rifle Competition Disciplines
As stated on the Cairns Rifle Club website, there are multiple disciplines sanctioned by the National Rifle Association of Australia (NRAA) which are shot by Cairns Rifle Club:
Target Rifle: This discipline is shot with a .308 or .223 caliber rifle, and held by the shooter using peep sights and a sling. Target Rifle has been actively contested since before World War I. The Cairns Rifle Club has operated continuously since 1893 — 128 years.
F-Class: This discipline is contested with optical sights (scopes) and the use of bipods or rests. Three categories of F-Class exist. Two are shot from an adjustable rest being F-Standard which is limited to either .308 Win or .223 Rem caliber rifles and F-Open which is unlimited up to a maximum of 8mm. The other discipline is F-TR which is shot from a bipod and limited to .308 Win caliber. [Editor’s Note — This is different than in the USA which has F-TR (bipod .223 Rem or .308 Win) and F-Open (front rest, open caliber) only.]
Sporting/Hunting Class: The most recent addition to the disciplines is the Sporting/Hunting Class.
The disciplines are contested at distances from 300m through to 800m at Wangetti and up to 1000 yards elsewhere. Here is a MAP for Wangetti, 40km north of Cairns.
Zac and Morgan are members of the Cairns Rifle Club, an organization with a rich history, going back to 1893. Here are Cairns Rifle Club members in 1903:
The NRA Blog ran an feature on Silhouette shooting by NRA Silhouette Program Coordinator Jonathan Leighton. Here are selections from Leighton’s story:
NRA Silhouette Shooting
The loud crack from the bullet exiting the muzzle followed by an even louder ‘clang’ as you watch your target fly off the railing is really a true addiction for most Silhouette shooters. There is nothing better than shooting a game where you actually get to see your target react to the bullet. In my opinion, this is truly what makes this game so much fun.
Metallic Silhouette — A Mexican Import
Silhouette shooting came to this country from Mexico in the 1960s. It is speculated that sport had its origins in shooting contests between Pancho Villa’s men around 1914. After the Mexican Revolution the sport spread quickly throughout Mexico. ‘Siluetas Metalicas’ uses steel silhouettes shaped like game animals. Chickens up front followed by rows of pigs, turkeys, and furthest away, rams. Being that ‘Siluetas Metalicas’ was originally a Mexican sport, it is common to hear the targets referred to by their Spanish names Gallina (chicken), Javelina (pig), Guajalote (turkey) and Borrego (ram). Depending on the discipline one is shooting, these animals are set at different distances from the firing line, but always in the same order.
Before Steel There Was… Barbeque
In the very beginnings of the sport, live farm animals were used as targets, and afterwards, the shooters would have a barbeque with all the livestock and/or game that was shot during the match. The first Silhouette match that used steel targets instead of livestock was conducted in 1948 in Mexico City, Mexico by Don Gonzalo Aguilar. [Some matches hosted by wealthy Mexicans included high-ranking politicians and military leaders].
As the sport spread and gained popularity during the 1950s, shooters from the Southwestern USA started crossing the Mexican border to compete. Silhouette shooting came into the US in 1968 at the Tucson Rifle Club in Arizona. The rules have stayed pretty much the same since the sport has been shot in the US. NRA officially recognized Silhouette as a shooting discipline in 1972, and conducted its first NRA Silhouette Nationals in November of 1972.
Silhouette Ace Eric Mietenkorte Shooting Smallbore Silhouette — Perfect Form:
Now There Are Multiple Disciplines
The actual sport of Silhouette is broken into several different disciplines. High Power Rifle, Smallbore Rifle, Cowboy Lever Action Rifle, Black Powder Cartridge Rifle, Air Rifle, Air Pistol, and Hunter’s Pistol are the basic disciplines. Cowboy Lever Action is broken into three sub-categories to include Smallbore Cowboy Rifle, Pistol Cartridge Cowboy Lever Action, and regular Cowboy Lever Action. Black Powder Cartridge Rifle also has a ‘Scope’ class, and Hunter’s Pistol is broken into four sub-categories. Some clubs also offer Military Rifle Silhouette comps.
Where to Shoot Silhouette
NRA-Sanctioned matches are found at gun clubs nation-wide. There are also many State, Regional, and National matches across the country as well. You can find match listings on the Shooting Sports USA website or contact the NRA Silhouette Department at (703) 267-1465. For more info, visit SteelChickens.com, the #1 website dedicated to Silhouette shooting sports.
When Bigger IS Better — The New .416 Colossus ELR Cartridge
John Pierce, founder of Pierce Engineering revealed an impressive new cartridge developed for the ELR (Extreme Long Range) game — the .416 Colossus. This has achieved 3300 fps shooting the Badlands Precision 525gr solid copper projectile (BC: 1.20 G1, .614 G7). Above is a “big rig” designed to shoot this cartridge. This rifle boasts a custom Eliseo chassis with 20X Pierce Engineering action and Krieger barrel. John Pierce noted: “Big thanks to Gary Eliseo for building this special chassis. Pete Contacos owns and tested the rifle and cartridge. He is ecstatic to say the least.”
John Pierce reported on Facebook: “After a long two years of development and waiting to see what results could be achieved, we are very pleased. The Colossus cartridge, designed by Mark Fox and myself, is showing great [results].”
The cartridge boasts impressive velocities. John reports: “Over 3300 fps shooting the Badlands Precision 525gr .416-caliber projectiles. Zero bolt-lift issues from RCC (Robertson Cartridge Co.) brass. [We have] 25 firings on one test piece and still good to go. Big thanks to Dan Warner [at Warner Tool] for making the special, awesome dies.”
More Capacity and Higher Efficiency than .416 Barrett and .416 Warner
One Facebook commenter wanted to know how the .416 Colossus compared to other big .416-caliber cartridges created for the ELR game: “Can you or Mark share the increase in powder capacity over a standard .416 Barrett and over a .416 Warner?” John replied: “I would rather not elaborate on details of cartridge just yet…however it has a bit more capacity and higher efficiency using a large magnum primer.”
Pete Contacos, the rifle’s owner, posted: “I would like to thank everyone who made this possible: John Pierce, Mark Fox, Gary Eliseo, Jeff at RRC Brass, Jason At Badlands Bullets, Dan Warner for dies. This is an AMAZING rifle made possible by all of the above People. THANK YOU ALL… looking forward to seeing you all at the matches this year.”
Gary Eliseo (Competition Machine) is making a similar big chassis for John Pierce. Gary posted: “Yours is almost finished”, to which John replied: “Thank you for the beautiful chassis, exciting to get my Big Red.” Gary has told us that this big new chassis is a scaled-up version of the Competition Machine UMR system. The large Pierce 20X action is epoxied in the chassis, which accepts a Rem-compatible trigger.
About RCC Brass — CNC Machined Quality
RCC manufactures brass cartridges on CNC lathes and mills starting with C272 solid bar stock. RCC reloading brass cartridges are manufactured to SAAMI, CIP, or customer specifications (yes custom cartridge and wildcats can be made). The brass does not use a conventional draw process. This allows the brass to be stronger, according to RCC:
“We machine all our cases on CNC lathes and mills and our case weight, case volume, and our case concentricity are the best available in the industry. We do not anneal the case head as it is hammer-forged to a high tensile strength which gives us the same hardness for each case. Since we use CNC equipment to manufacture our, case weight is nearly identical, the case volume is too, and our case concentricity is held to a 0.001”.
Since we are not held back by the limitations of a [traditional] draw system, we are able to use higher strength alloys to manufacture cartridges. Our C272 brass alloy has a much higher tensile strength and tighter molecular grain structure than C260 brass, without losing the needed elasticity. Test results have been very positive as we’ve had reports of increased in velocity and energy and lower shot deviations versus C260 drawn brass.
We manufacture high-quality reloading brass cartridges for vintage, obsolete, hard to find, and wildcat calibers. All cartridges are made to SAAMI, CIP, or tolerances provided to us. Our unique process allows us to manufacture over 1,500 different cartridges at tolerances up to 0.0005”. We manufacture reloading brass cartridges for any firearm.
We custom fit brass to the chamber of your firearm. Our custom fit program will give you the headspace and chamber dimensions best suited for your firearm. Customers can send us fire-formed brass, a chamber cast, or the firearm for the custom cartridge. We do Wildcats too. Send us a reamer drawing, or a dimensioned drawing and we will manufacture your wildcat cartridge. There is a one time set-up fee for all wildcats and a 100 piece minimum order. We do Custom Headstamps too. We use our CNC mills to engrave headstamps. We are able to do text and some graphics too.”
On August 9, 2021 the Vintage Sniper Team Match returns to Camp Perry, Ohio. We’re glad to see this popular match return after it (and other Nationals events) were cancelled in 2020 due to the Pandemic. This unique Sniper Team event is a two-man team competition using scoped rifles of WWI and WWII Vintage. This has become one of the most popular CMP rifle matches held at Camp Perry, with over 200 teams competing in recent years. Many competitors use some version of the M1903 Springfield, but you’ll also see scoped M1 Garands, M1917s, K31s, Mausers, and even a Lee-Enfield or two. There are both bolt action and semi-auto classifications, with each division being scored separately.
We expect 200+ teams to compete for the Vintage Sniper Trophy this summer. Two-person teams will fire 10 rounds in 20-second intervals from scoped vintage military rifles set on sand bags. One team marksman shoots from the prone position at 300 and 600 yards, while the other serves as a spotter to relay shot position. Marksman and spotter switch positions on the firing lines, allowing each teammate to play both roles. Scores are then combined for an Aggregate team total.
Who can identify this rifle, with its unusual scope mount?
“Walking down the … line one can find a plethora of various rifle models. Although 1903A4 and USMC M1941 builds made up a significant majority of the rifles on the line, other models such as the K98, M1C, M1D, M91/30, Swedish Mausers, and the No4 Mk1 (T) had their place in the hands of various shooters.” — Criterion Barrels Article
Our friends at Criterion Barrels have published a great article about the Vintage Sniper Rifle Match. This story offers a fascinating “insider’s perspective” on the Match, plus Vintage Sniper gunsmithing tips, Anyone considering shooting the Vintage Sniper match for the first time should definitely read this article.
About the Match and the Rifles
The Vintage Sniper Match was the brainchild of Hornady’s Dave Emary. The competition was inspired by his father, a World War II scout sniper, who carried a rifle similar to the 1903A4 rifle builds that can be found today on the Camp Perry firing line. Bob Schanen worked alongside Dave and the CMP staff in establishing the various competition rules prior to the first official Vintage Sniper Match in 2011. The match developers made a point to offer some level of flexibility in rifle configuration, allowing specific types of non-issue optics and rifle rebuilds. This helped make the match more inclusive.
Hornady’s Dave Emary and “Gunny” R. Lee Ermey (RIP):
Camp Perry — The Venue
The hallowed grounds of Camp Perry have hosted some of the nation’s finest shooters each summer for more than a century. Some of the world’s greatest marksmen have accomplished remarkable feats on the ranges of this lakeside military outpost. Located on the coast of Lake Erie, Camp Perry is positioned just outside of the scenic town of Port Clinton, Ohio. It is our firm belief that every shooter should make the pilgrimage to the Camp Perry at least once in their lifetime. If not participating in an event, visitors should at least make an attempt to meet the competitors, witness the wide selection of firearms used by participants, and pay a visit to the various vendors on base.
The 2021 NRA National Rifle and Pistol Championships will be held July 6 through August 28, 2021 at Camp Atterbury, Indiana. Registration for the 2021 NRA National Championships for Smallbore Rifle, High Power Rifle, F-Class, and Precision Pistol is now open. Competitors can REGISTER ONLINE for the 2021 NRA National Championships via the NRA Competitive Shooting Web Portal.
The following 2021 NRA Rifle and Pistol Championships will be held at Camp Atterbury this summer, starting with Smallbore Rifle. Camp Atterbury has hosted the High Power Rifle Nationals since 2017. Here is the schedule for the Major events. NOTE: There is NO ELR event this year:
Smallbore Rifle Championship: 6-18 July, 2021
Precision Pistol Championship: 20-25 July, 2021
F-Class Mid-Range Championship: 22-26 July, 2021
F-Class Long Range Championship: 27-30 July, 2021
Fullbore Championship: 1-7 August, 2021
High Power Mid-Range Championship: 9-13 August, 2021
High Power Long Range Championship: 14-19 August, 2021
Over-the-Course (OTC) Competition: 22-28 August, 2021
View Latest Match Calendar (6/18/21) — CLICK TO ZOOM!
Note, this year the Smallbore Nationals will include Rimfire F-Class, starting on July 11th. Among notable specific rifle matches include: Fullbore America Match (August 7); Palma Team Match (August 15); Wimbleton Cup Match (August 18). For 2021, the NRA will NOT host an Extreme Long-Range Championship. Specific start dates are listed at end of article.
In addition to the main NRA matches, there are Indiana State Rifle and Pistol Association (ISRPA) events including: Junior Intermediate Smallbore Clinic, Ladies’ Day on the Range, Family Day on the Range, Basic Safety Class, Introduction to Shooting Sports Class, Laser Range.
Lodging Options at Camp Atterbury — Summer 2021
Shooting Sports USA (SSUSA) recently released information on the NRA Championships at Camp Atterbru. The SSUSA article states: “As for lodging, there are several options. The most convenient are on-base, with Camp Atterbury offering hotel-style buildings with suites, along with standard rooms, and ‘open military squad bay’-style quarters available by reservation. Camp Atterbury also offers a limited number of RV spots, plus the MWR campground and cabins. NOTE: Lodging is controlled by the Camp Atterbury Lodging Office, not the NRA.
Click Photo for Large Map of Camp Atterbury, Indiana
Key NRA Championship Start Dates by Discipline
6 July — Smallbore Nationals 3-Position
11 July — Smallbore Nationals Prone and Rimfire F-Class
17 July — Metric Smallbore Prone and Rimfire F-Class
20 July — Precision Pistol (including Revolver)
22 July — F-Class Mid-Range Individual
26 July — F-Class Mid-Range Team Match
27 July — F-Class Long-Range Individual
29 July — F-Class Long-Range Team Match
1 August — Fullbore Match
7 August — Fullbore America Match
9 August — Midrange Cycle
14 August — Long Range Cycle
15 August — Palma Team Match
16 August — Palma Individual Match
18 August — Wimbleton Cup Match
22 August — OTC (Over the Course) Week
Long Range Competition at Camp Perry
For rifle shooters, the ability to shoot out to 1000 yards on the historic ranges of Camp Perry is a definite “bucket list” item. The CMP invites competitors to test their skills in the CMP’s Long Range events at the National Matches. The series features five full days of competition — all from 1000 yards. To learn more, visit the CMP’s Long Range Info Page.
Camp Perry has been a sought-after destination for marksmen since 1907, when the National Rifle and Pistol Matches moved to the Ohio facility. Since then, it has become a coveted journey for hundreds of thousands of guests through the generations. Learn more about the 2021 Camp Perry National Matches through the CMP website: https://thecmp.org/nationals.
Smallbore Training Provided by USAMU Experts
This summer, the CMP will offer a Smallbore Rifle Small Arms Firing School during the 2021 National Matches. The course, taught by members of the Army Marksmanship Unit, will cover .22 LR rimfire competition and fundamentals. This should be a great opportunity for young smallbore competitors.
Camp Perry’s famous Commercial Row has long been a big attraction at the National Matches. Take a stroll down Commercial Row and check out a wide variety of products and gear for a variety of disciplines, all in one location. CLICK HERE for a list of all 2021 Commercial Row Vendors.
25 Days and Counting…
The 2021 CMP National Matches will get underway very soon. You can get more info, view the Official Match Programs, and Register Online at the CMP National Matches homepage. If you have questions or need assistance with registration, call the CMP at (419) 635-2141.
114 Years of National Match History at Camp Perry
The National Matches have been hosted at Camp Perry since 1907. The National Matches, which have now spanned 114 years and five generations of Americans, have a rich history. Here are two covers of the American Rifleman magazine, from 1931 on the left and 1971 on the right.
History of Camp Perry
Federal legislation originally launched the National Matches. The 1903 legislation also established the National Matches, commissioned the National Trophy and provided funding to support the Matches. The National Matches have been held at Camp Perry since 1907. The range is located along the shores of Lake Erie in northern Ohio near Port Clinton. The site was first acquired in 1906, in response to the need for a larger facility for military training and the NRA’s shooting programs. In 1906 Gen. Ammon B. Crichfield, Adjutant General of Ohio, ordered construction of a new shooting facility on the shores of Lake Erie, 45 miles east of Toledo, Ohio. The original land for Camp Perry was purchased in 1906, and the reservation was named after Commodore Oliver Hazard Perry, the American naval commander who won the Battle of Put-in-Bay during the War of 1812.
On August 19, 1907, Cpl. L. B. Jarrett fired the first shot at the new Camp Perry Training Site. And that year, 1907, Camp Perry held its first National Pistol and Rifle Championship events. This location has hosted the annual National Matches ever since (though they were cancelled in 2020 due to COVID). Typically over 4,000 competitors attend the National Matches each year, making it the most popular shooting competition in the western hemisphere.
The 
Metallic Silhouette — A Mexican Import
Before Steel There Was… Barbeque
