A while back, RifleShooter online magazine published a list of the purported Ten Best Bolt-Action Rifles of All Time. Ten classic rifle designs (including the Remington 700, Winchester Model 70, Weatherby V, and Mauser 98) were featured with a paragraph or two explaining their notable features.
“Best” Lists Stir Controversy…
These Top 10 lists are always controversial. While most readers might approve of half the entries, there are always some items on the Top 10 list that some readers would challenge. Here is RifleShooter’s Top 10 list. What do you think? Are there some other bolt-actions that are more deserving?
1. Springfield M1903
2. Mauser 98
3. Winchester Model 70
4. Remington Model 700
5. Weatherby V
6. Sako L61/AV
7. Savage Model 110
8. Ruger M77
9. Tikka T3
10. Mannlicher-Schonauer
Zeiss Victory SF 8×42 model shown. The 10×32 has 90% light transmission.
If you are looking for high-end binoculars, you should definitely consider the new ZEISS Victory SF series. These offer superb glass, rapid focus, and ultra-wide field of view (very important for hunters).
Recognizing the qualities of the ZEISS SF line, Outdoor Life Magazine recently named the ZEISS Victory SF 10×32 binoculars as the winner of its Editor’s Choice Award in the hunting binoculars category. This Award was announced in Outdoor Life’s September issue.
Outdoor Life noted three key features of the new Victory SF: 1) Very Wide Field of View; 2) Rapid Focus; and 3) Balance. Outdoor Life also praised the exceptionally sharp and clear SCHOTT fluorite glass with proprietary high-contrast coatings. Outdoor Life’s editors wrote: “Optically, the Victory SF brings the same best-in-class attributes as earlier Victory models. The guts are SCHOTT fluoride glass protected by ZEISS’s proprietary high-contrast and weatherproof coatings. We also liked the very positive four-position eyecups and the locking diopter control, located conveniently on the center hinge.”
Why the ZEISS Victory SF Won the Award
Outdoor Life had high praise for the Zeiss Victory SF line, with its impressive features and performance:
“With its remarkable Victory SF, ZEISS has managed to upend the staid world of binoculars and offer a product with three noticeable advantages. The first is its absurdly wide field of view, achieved by increasing the sizes of lenses and redesigning the optical prescription, or how all lenses and prisms work together. Finally, SF in its name stands for ‘SmartFocus’ but it might stand for ‘SpeedFocus’ given the rapidity of zooming from close focus to infinity in just 1.6 turns of the wheel.”
Outdoor life also praised the Victory SF’s balance: “Another remarkable attribute of the new ZEISS, which will be available in 8×42, 10×42, and 8×32 configurations along with the 10×32, is its balance. The binocular weighs a trim 20.8 ounces, but it feels even lighter, largely because of its wonderful equilibrium.”
In the ELR game, particularly the King of 2 Miles (KO2M), it’s “go big or go home”. The top shooters run large-capacity cartridges that push large-caliber, ultra-high BC bullets at very high velocities. Bullets launched by cartridges such as the .416 Barrett can sustain supersonic velocities at Extreme Long Ranges — and that’s what it takes to win. The .416 Barrett can launch a 550-grain solid bullet at 3000+ FPS.
Photo from ELR Competitor Corbin Shell.
2018 and 2019 Kings of 2 Miles Loaded on RCBS Presses
So how do you load jumbo cartridges such as the .416 Barrett? It takes a big, heavy, super-strong reloading press. We’ve learned that the last two Kings of 2 Miles, Paul Phillips (2019) and Robert Brantley (2019) both loaded their KO2M ammo on RCBS AmmoMaster .50 BMG presses. Phillips loaded .416 Barrett ammo, while Brantley loaded custom .416 MCS rounds.
In 2018, Robert Brantley topped the field using his custom .416 MCS loads perfected on the AmmoMaster .50 BMG Press. This year, Brantley took a close second to 2019 KO2M winner Paul Phillips. Both Phillips and Brantley use the AmmoMaster .50 BMG single stage press kit and RCBS .416 Barrett dies to hand-load for extreme long-range. “My ammo has been much more consistent after switching to the RCBS press and dies,” remarked Phillips, who runs the Global Precision Group. Brantley said he uses RCBS products for most of his reloading needs — from the dies and AmmoMaster, to the ChargeMaster and Brass Boss. His custom .416 MCS loads launch a 550-grain bullet more than 3,100 fps.
Loading with RCBS AmmoMaster .50 BMG Press
This video shows reloading with the RCBS AmmoMaster .50 BMG press. While this video shows .50 BMG cases being loaded, the principles are the same for loading the .416 Barrett used by both Brantley and Phillips. Big cases need big presses!
Derek Rodgers Shooting the .375 CheyTac at K02M in 2017
Another ELR ace, 2017 King of 2 Miles champion Derek Rodgers, favored the .375 CheyTac cartridge. For his successful K02M quest, Derek ran Cutting Edge Bullets in Peterson brass with Hodgdon H50BMG powder. The video below shows Derek in action at the 2017 KO2M event.
The KO2M competition is a two-day extreme long-range (ELR) match held at the NRA Whittington Center outside Raton, New Mexico. Teams consist of one shooter and up to two wind coaches/spotters, who fire on steel targets ranging from about 1,500 to 3,500 yards.
Here’s something all shooters need — a smartphone App that calculates bullet-hole group sizes from your own photos. The Ballistic-X App is simple to use. Take a photo of your target, set some values (such as bullet diameter and distance to target), then use the touchscreen to place circles around each hole. The App will calculate group size (in MOA or Mils), distance to point of aim, and provide all the info in an overlay. Then click “save” to record your group for posterity!
This App works well, is relatively easy to set-up, and costs just $7.99. It is available for both Android devices and iOS (Apple) devices. There are other ways to measure group sizes from target images, such as the excellent On-Target program, which we have used for years. However On-Target requires a software installation on a Windows platform desktop or laptop. Ballistic-X is a simple, easy-to-install App with versions for both Android and iOS (Apple) Mobile devices.
The Ballistic-X App has a relatively easy-to-use interface. Of course you can choose either MOA or Milrad group values, and Inch or Metric dimensions. There are various labeling options that provide useful info for Load Development. There is even an ATZ (Adjustment To Zero) feature for adjusting your turrets.
How to Use Ballistic-X App
1. Select Photo Source — Choose Camera to take new photo or get image from Photo Library.
2. Set Reference Values — Select Bullet Diameter and enter Distance to Target.
3. Establish Scale on Image — Mark two points on target photo to set scale. For example, if the target has a 1″-square grid lines, mark two points on grid for 1″ distance.
4. Mark Point Of Aim — Put the central X on the aim point.
5. Designate Shot Locations — Place the green circles around each shot.
6. Finalize Data Display — Position Overlay, select size/color options, and export file.
Android Options — Range Buddy FREE App
Along with Ballistic-X, there is another Mobile App, Range Buddy, that also measures shot groups. Range Buddy is currently offered for Android devices only. It is FREE, but has adverts. Range Buddy isn’t bad, but users complained about the program crashing, and there are compatibility issues with newer phones. We recommend you pay $7.99 and stick with Ballistic-X.
How do you trim your cases? We use a variety of tools, including power case trimmers. But our go-to trimmer for Benchrest-type cartridges is the L.E. Wilson Trimmer unit, now available in a handsome and durable stainless assembly. This thing is slick. It trims very precisely with the use of Wilson case holders combined with a micrometer-type stop for length control. As sold complete with micrometer, quick clamp, and metal stand, this Wilson Stainless Trimmer is $154.95 at Creedmoor Sports. We think that’s a fair price for a unit that can last a lifetime, trimming many thousands of cases.
In this video, Bill Gravatt of Creedmoor Sports demonstrates the Stainless Wilson trimmer with micrometer length control. Gravatt offers helpful operational tips to improve trimming efficiency, so this video is worth watching even if you’ve used a Wilson trimmer before:
Tips for Trimming with Wilson SS Micrometer Trimmer:
1. After inserting brass in the case holder, tap the case lightly to ensure it seats fully.
2. When starting your case-trimming session, do one or two test cases to check cut length. Adjust length with micrometer, then test length again. If “good to go”, set length stop. NOTE: Release the Stop Screw to make major adjustments. Use the Micrometer to make fine adjustments, in .001″ increments.
3. After trimming operations, be sure to chamfer case mouth after cutting to remove burrs. NOTE: After you have made the chamfer, we recommend gently spinning the chamfer tool backwards a couple times in the case neck. This will burnish/smooth the newly-cut champing, which helps with bullet seating.
Features of Deluxe Wilson Stainless Case Trimmer with Micrometer
— Long lasting Stainless finish with Micrometer adjustment.
— New 304 Stainless Steel Handle included with Micrometer Trimmer.
— Rotary-style clamp swings to secure case-holder — quick and easy.
— Larger stop screw adjustment from 3/8″ (old) to 1/2″ (new) with increased width on stop nut. Coated with black oxide for a long lasting durable finish.
— Made in the USA with American Steel.
— Power Adaptor compatible.
With the 2020 Presidential election just 65 days away, and more riots in the streets, it may be time to think about getting that AR-platform rifle. Getting it while you still can. Democratic Party nominee Joe Biden and his VP candidate Kamala Harris both support banning of AR-type rifles. And Biden and Harris have praised Canada’s sweeping semi-auto gun ban carried out by Prime Minister Trudeau through dictatorial executive action (without parliamentary approval). The official Democratic Party Platform includes these provisions:
— Banning the manufacture and sale of ARs and modern sporting rifles
— Halting and criminalizing online firearm and ammunition sales
— Forcing states to require licenses for owning any firearms
— Instituting delay processes for background checks
— Criminalizing private firearm transfers
And during her Presidential campaign (before she was selected as Biden’s VP), Kamala Harris declared: “Upon being elected … I will give the United States Congress 100 days to get their [sic] act together and have the courage to pass reasonable gun safety laws. And if they fail to do it, then I will take Executive Action”. That’s a chilling threat…
Got the message? The Dems want your guns. And the first guns they want to take away are the “evil” black rifles. As Robert “Beto” O’Rourke said famously: “Hell yes we’re going to take your AR15″.
AR Purchase Option — Lower Receiver
The restricted part of an AR15 is the lower receiver. This is the section that must be purchased through an FFL, with a background check. You can later add an upper (or multiple uppers), which can be purchased directly from a supplier. But the lower is what you need. If you’re short on cash, but want to get an AR, grab a lower and then add a complete upper receiver later.
One leading vendor of AR lowers is Palmetto State Armory (PSA). PSA has plenty of stripped lowers and complete lower receivers in stock right now at attractive prices. Here are two offers on 8/29/2020:
Complete AR15 Lower Receiver — $209.99
This complete Palmetto State Armory lower receiver is fully assembled and ready for your complete Upper. This unit is machined from 7075-T6 Aluminum Forgings, hardcoat anodized. The lower comes with M4 Stock and Standard Carbine Buffer. The bolt and carrier fit .223 Rem/5.56×45 case heads.
Stripped AR15 Lower Receiver — $74.99
This PSA Stripped Lower Receiver is machined from 7075-T6 Aluminum Forgings, hardcoat anodized. It does NOT include trigger group and pins for operation. You must purchase those items separately. This is just the bare lower receiver.
When your cases become hard to extract, or you feel a stiff bolt lift when removing a cartridge, it’s probably time to full-length size your cases, and “bump” the shoulder back. Short-range benchrest shooters, running high pressures, typically full-length size every load cycle, bumping the shoulder .001-.002″. The vast majority of mid-range and long-range F-Class shooters also full-length size every time. High Power shooters with gas guns should definitely full-length size every time, and may need to bump the shoulders .003″ or more to ensure reliable feeding and extraction.
Use Shims for Precise Control of Shoulder Bump
Some shooters like to set the “default” position for their full-length die to have an “ample” .003″ or .004″ shoulder bump. When they need less bump, a simple way to reduce the amount of shoulder movement is to use precision shims in .001″ (one-thousandth) increments. Sinclair Int’l offers a set of seven (7) shims for your standard 7/8-14 FL sizing dies for $14.99.
Sinclair explains: “Each shim is notched for easy size identification. Just set your die using one of the middle thickness shims. Adjustments can be made easily by changing shims to increase or decrease die depth without changing the stem setting. This is a great upgrade for non-micrometer adjustable dies.”
Here are reports from Forum members who use the shims:
“Great product. I have my die lock ring(s) adjusted for the shortest headspace length on my multiple chambers 6BRs and 6PPCs. When needing a longer headspace, I just refer to my notes and add the appropriate shim under the lock ring. Keep it simple.” — F.D. Shuster
Mats Johansson writes: “I’ve been using [shims] since Skip Otto (of BR fame) came out with them. I set up my dies with the .006″ shim, giving me the option of bumping the shoulder a bit more when the brass gets old and hardens while still having room to adjust up for zero headspace, should I have missed the original setup by a thou or two. Hunting rounds can easily be bumped an extra .002-.003″ for positive, no-crush feeding. Being a safety-oriented cheapskate, I couldn’t live without them — they let me reload my cases a gazillion times without dangerous web-stretching. Shims are a must-have, as simple as that.” — Mats Johansson
Brownells offers the seven-piece set of Sizing Die Shims that let you adjust the height of your die (and thereby the amount of bump and sizing) in precise .001″ increments. Sinclair explains: “Some handloaders will set their die up to achieve maximum sizing and then progressively use Sinclair Die Shims between the lock ring and the press head to move the die away from the shellholder. Doing this allows you to leave the lock ring in the same position. These shims are usually available in increments of .001″ and work very well.”
Seven Shims from .003″ to .010″
For use with 7/8-14 threaded dies, Sinclair’s $14.99 Die Shim Kit (Sinclair item 22400 or Brownells Code 749-001-325WB) includes seven shims in thicknesses of .003, .004, .005, .006, .007, .008, and .010. For ease of use, shim thickness is indicated by the number of notches cut in the outer edge of each shim. Even without looking you can “count” the notches by feel.
NOTE: These shim sets can also be use to adjust bullet seating depth for dies that lack micrometer adjustment. Use the same 7/8-14 shims with your non-micrometer seating dies.
Shims for Arbor Dies
Do you seat with an Arbor Press? No problem…
Brownells offers a $14.99 10-shim Arbor Die set for use with L.E. Wilson seating dies employed with arbor presses. Frankly we prefer micrometer-top Wilson dies, but if you have the standard Arbor dies, these shims come in handy. Order either Brownells Code 749-001-370WB (.22 to .243 caliber) or Brownells Code 749-001-326WB (.25 to .30 caliber).
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Midsouth — 105gr Nosler RDG Bullets, $119.99 for 500
⏺ High-BC 105gr 6mm bullets — Great for PRS and other gun games
If you shoot PRS, NRL, Silhouette, or any of the disciplines where high-BC 6mm bullets are popular, here is a great deal. Right now you can get 500 Nosler 6mm 105gr RDF (Reduced Drag Factor) bullets for just $119.99, a $55 savings off the regular price. That works out to out to just $24.00 per 100 — half the price of some of other 6mm match bullets. These are high-quality BTHP bullets with impressive 0.571 G1 and 0.280 G7 BCs. They will certainly do the job for PRS/NRL competitors running 6mmBRAs, 6 Dashers, 6mm GTs, and 6mm Creedmoors. Stock up now before the price goes back up.
2. Grafs.com — Universal Case Trimming System, $59.99
⏺ Indexes off shoulder — works on cases from .17 Rem to .460 Wby
If you’ve got an old fashioned manual case trimmer that is finicky to set up and slow to use, check out this new Universal Case Trimming System from Frankford Arsenal. This micro-adjustable tool indexes on case shoulders for precise trim lengths. The multiple collet system works with all shouldered cartridges from .17 Remington to .460 Weatherby. This works with almost every 1/2″ drill or drill press, and the system comes complete with collets and collars in a fitted storage case. If you need to trim a wide variety of cartridge types, this could really increase your efficiency. Originally $71.99, this Case Trimmer System has been discounted to $59.99 this week!
⏺ Excellent FFP scope with 5X Zoom Ratio and good controls — $399 savings!
Need glass for your varmint rifle? Here’s a great optics choice, hundreds off normal retail. This 5-25x50mm FFP Burris Veracity features 25 max power and 5X zoom range — ideal for the varmint fields. Multi-turn target knobs offer up to 15 MOA of adjustment per rotation with a handy zero stop. The large 50mm front objective brings in plenty of light. We like the reticle — the Progressively Thick Crosshairs (PTC) are thicker away from center, for ultra-fast target engagement. This is a very good optic that sells elsewhere for up to $899.00. This fully-guaranteed “blemished” model is a steal at $499.99.
⏺ Fine new press and all you need to reload — just add dies and components
The RCBS Rebel Master Reloading Kit features the new Rebel Press plus Uniflow III powder measure, pocket digital scale, hand priming trickler, powder funnel, fold-up hex key set, deburring tool, brush set, case loading block, spray lube, and a Speer Loading Manual. Midsouth’s Rebel Kit sale price is $379.99. But note — this Kit qualifies for a $75.00 RCBS rebate, lowering your net cost to $304.99 — a killer deal. Don’t delay — the RCBS Summer Rebate expires 8/31/2020.
5. CDNN Sports — Browning .22 LR Buck Mark Pistol, $269.88
⏺ Accurate .22 LR pistol with nice trigger — Save with Rebate
The Browning Buck Mark is a classic, and for good reason. These pistols are reliable, accurate, well-balanced, and have a good trigger. And now you can get one for under $270! CDNN Sports has the Browning Buck Mark UFX with 4″ Barrel on sale for $294.88, discounted from $379.99. But it gets better, this Buck Mark qualifies for a $25 Browning Bucks rebate, lowering your net cost to just $259.88. While we prefer Buck Marks with longer barrels, this is a killer deal for the basic 4″-barrel model.
6. MidwayUSA — Pro Series Competition Shooting Mat, $34.99
⏺ Very high quality mat for the price — big discount
The MidwayUSA Pro Series Competition Shooting Mat is now on sale for just $34.99, 36% off the basic price. The Pro Series mat measures a full 73.5″ x 35.5″. Zippered pockets on the front flap hold ammo or log books. And there are webbing “pockets” for bipod feet so you can pre-load your bipod with forward pressure. This quality mat boasts 0.35″ thick padding, multiple pockets, 6 grommets for staking, and a nice carry strap. It’s easy to transport, rolling up to about nine inches in diameter. User reviews of this $34.99 Shooting Mat have been very positive.
7. Amazon — RifleKuhl and BarrelCool Portable Cooling Units
⏺ Get Barrel Coolers for hot summer months, extend Barrel Life
In summer it can be tough to keep your barrel at moderate temperatures. But a handy, compact cooling fan device can really help. Two of the best barrel coolers on the market are the RifleKuhl from Magnetospeed and the original Barrel Cool from BarrelCool. Both of these units can double as empty chamber indicators, feature high power fans and can cool your barrel down to a decent, usable temperature in about 10 minutes.
8. Amazon — Tipton Universal Bore Guide, $12.95
⏺ Very inexpensive but versatile for full range of chamber sizes
Bore cleaning is critical for rifle longevity and accuracy. But you need a good bore guide to avoid potential damage to your chamber and bore. This handy Tipton Universal Bore Guide ships with multiple chamber adapters. Three tapered tips are included (small fits calibers .17-.24, medium fits most calibers .25-.30, and large fits most calibers over .30). This Universal Bore Guide includes an action collar for AR rifles.
⏺ Try before you buy — A-Tips offer high, consistent BCs
Many of our readers have been curious about Hornady’s A-Tip bullets, but don’t want to spend $75-$85 to try out a full box. In addition, many of the more popular calibers and bullet weights are sold out. Now, thanks to Midsouth Shooters, you can try an A-Tip Sample Pack to see if A-Tips work in your barrel. Choose from four options: 110gr 6mm; 135gr 6.5mm (back-order); 153gr 6.5mm; and 250gr .308 caliber. All Sample Packs contain 10 bullets, and cost $9.99 at Midsouth.
Running out of space in your gun safe? Here’s a clever product that will allow you to store more long guns in your current vault. The plastic Rifle Rods from Gun Storage Solutions slip in long-gun barrels and then grip the shelf above using Velcro pads. This allows you to nestle your rifles and shotguns much closer together than with the conventional racks provided with most gunsafes.
The handy Rifle Rods are offered in bright orange or basic black. We prefer the orange rods (shown above with the Velcro “receiver” shelf liner provided with the Rod Kit).
Rifles with narrow furniture (such as lever guns) can be placed very close together, saving lots of space. For benchrest or varmint rifles with wider fore-ends, you won’t benefit as much. Note that, in the photo above, all of the guns are fairly slim — none have wide fore-ends. Still we think these Rifle Rods could open up 12″ or more horizontal clearance in a medium-sized safe — that could easily allow you to store six (6) more guns in two rows, as shown.
Rifle Rod Kits Starting at $24.95
A kit with 5 Rifle Rods and loop fabric shelf liner costs $24.95 on Amazon.com, while the 10-Rod Kit with liner costs around $34.95. That’s a lot cheaper than buying a new safe. A six-pack of additional Rifle Rods costs $17.95 on Amazon. You can also purchases rods and fabric directly from Gun Storage Solutions.
WARNING: Always REMOVE Rod from barrel before taking gun to the range. Never place live ammunition in a gun with storage Rod in the barrel!
Product tip from EdLongrange. We welcome reader submissions.
This feature story comes from 5-time NRA National Long-Range Champion John Whidden. In this article John, who runs Whidden Gunworks, talks about the Palma rifle he has used at the Camp Perry and Camp Atterbury National Matches and other major competitions. This unique .308 Win prone rifle features a Barnard “P” action in a converted aluminum Anschutz “Precise” smallbore (rimfire) stock. The combo of Barnard action and Anschutz ergonomics is hard to beat, says John, who told us: “this is easily the best Palma rifle I’ve ever had.”
As a bonus, the Barnard “drop-in” required no modification of the Anschutz Precise stock. This means John can actually swap in his rimfire barreled action and shoot smallbore with the same stock.
Whidden’s Perfect Palma Match
Whidden secured his 2017 NRA Long Range National Championship title by shooting “clean” (not dropping a point) in the tough Palma competition. In the NRA Palma match, rifles must be .223 Rem or .308 Winchester, with metallic sights (no scopes). The match is conducted at three yardages, 15 shots at each distance of 800/900/1000 yards, with unlimited sighters at 800 and two sighters at 900 and 1000.
Whidden’s Championship-Winning Rifle
Since John captured his fifth Long Range crown with a superb performance in the Palma match, we thought we’d give readers a look at John’s very special Palma rifle. This unique .308 Win prone rifle features a Barnard “P” action in a converted aluminum Anschutz “Precise” smallbore (rimfire) stock. John told us this gun handles like no other: “After recoil, with this Anschutz stock, the sights fall right back on target — better than any other prone rifle I’ve shot”.
As a bonus, the Barnard “drop-in” required no modification of the Anschutz Precise stock. This means John can actually swap in his rimfire barreled action and shoot smallbore with the same stock.
Sling Rifle Evolved: The Ultra-Accurate Hybrid Palma Rifle
by John Whidden
The mental component of Long Range competitive shooting is always challenging but having tremendous confidence in the accuracy of your equipment is a huge benefit. There’s nothing to start your Palma match off well like knowing that you are shooting the most accurate Palma rifle you’ve ever owned.
After winning an NRA Long Range National Championship at Camp Perry, there are always plenty of questions about the equipment used by those at the top. Shooters are always looking to learn what is the best equipment at any given time so that when the time comes to spend our own hard earned dollars we can make the best choices. Even if you shoot an entirely different discipline knowing which manufacturers are making winning gear is very valuable.
Whidden .308 Winchester Palma Rifle
Action: Barnard “P” (three lugs, 60° bolt lift)
Barrel: Bartlein 32″, Light Palma contour, cryo-treated by 300 Below
Stock: Anschutz Precise aluminum smallbore stock, set up for centerfire barreled action
Trigger: Barnard Two-Stage adjustable
Whidden’s Wonder-Gun: German Stock, New Zealand Action, American Barrel
The Palma rifle I shot this year at Camp Perry is one that I have been super pleased with. I built the rifle early this year and the major components are a Barnard P action, Anschutz Precise smallbore stock, and Bartlein barrel. The caliber is .308 Win, as dictated by the Palma rules. Palma matches are fired from 800, 900, and 1000 yards utilizing iron sights only. No optical sights are allowed.
The Anchutz Precise stock is so well-designed that once I finished adjusting the details, I realized that my hold was about 1/3 smaller than with the stocks I shot previously. While in recoil the gun will track vertically and fall back down right on my own target just as it should. In the past, with my other Palma rifles, it was frankly sometimes a struggle to get them to settle back on target after a shot.
Whidden Gunworks has installed a variety of different actions in the Anschutz Precise stocks. Though the stocks are designed for the .22 LR caliber 2013 action rifles, we’ve successfully installed Barnard, Kelbly, Bat, Nesika, and Remington clone actions into them. The Barnard Model P makes a particularly simple installation because there is no modification necessary to the stock at all. A competitor can then shoot both his centerfire rifle as well as his smallbore gun in the exact same stock. The location of the trigger and bolt handle on the Barnard are positioned just right to make this work. Other actions do require at least some amount of modification to the stock, and we have found the Barnard works the best.
Barnard manufactures several models of actions as part of their lineup. All of the actions in the lineup use three lug bolts which give a shorter 60-degree bolt lift when opening and closing. All of the critical surfaces are machined after heat treating. This means that they are exceptionally true and square, more so than other actions. The Model P action is most familiar to Palma and F-Class shooters and are commonly seen on the firing line. The fact that Model P actions include an excellent two-stage trigger makes also the pricing very attractive.
Based on my previous excellent experiences, I selected Bartlein barrels for this rifle. When shooting internationally in the Palma matches we are restricted to 155 grain .308 bullets, but I made the unusual choice of a 1-10″ twist for these bullets. I’ve shot this fast twist for some years with the 155s with good success and it’s pleasing to know that Bryan Litz is finding benefits in some cartridges to shooting faster twist rates than we previously thought we needed. The chamber is the 2011 Palma and the barrel is a Light Palma contour finished at 32” length. The barrel was cryo-treated by 300 Below. The point of impact isn’t changed at all by barrel heating and the accuracy is incredible regardless of the temperature of the barrel. This can’t be said of all the barrels I’ve owned.
Get Your Own Wonder-Gun from Whidden Gunsworks
Like what you see? Whidden Gunworks can build you a rig like this, fitting a centerfire barreled action in the Anschutz Precise stock. John tells us: “Call us to find the current all-up price for a special rifle like this with Barnard or other suitable custom action, and Anschutz stock. We attempt to keep all of the parts except the stock in inventory, so lead time should be under eight (8) weeks.”
Stock Offers Great Adjustability One thing that is quickly noticed about the Anschutz Precise stock is its adjustability. The engineers did a very good job of allowing many of these adjustments to be made while in the shooting position, most notably the cheekpiece adjustments. When a shooter picks up a Precise stock for the first time they also notice how narrow the fore-end is. This really contributes to reducing the pain in the forward hand in prone when shooting with a sling. This stock is, by far, the most comfortable sling stock I’ve ever handled.
This rifle was very accurate right away and very comfortable to shoot. I’ve built some really good shooting Palma rifles but this is easily the best Palma rifle I’ve ever had. The Barnard action with its superb quality and excellent two-stage trigger has been the best choice I could have made. When you can go to the firing line knowing that you have the very best, the foundation for success has been set.
Shims for Arbor Dies
One thing that is quickly noticed about the Anschutz Precise stock is its adjustability. The engineers did a very good job of allowing many of these adjustments to be made while in the shooting position, most notably the cheekpiece adjustments. When a shooter picks up a Precise stock for the first time they also notice how narrow the fore-end is. This really contributes to reducing the pain in the forward hand in prone when shooting with a sling. This stock is, by far, the most comfortable sling stock I’ve ever handled.
