PMA Action Cleaning Tool Kit Review by Danny Reever
I’ve been playing with the PMA Action Cleaning Tool Kit for about a month now. Previously, I used one of the old style (round knob) Sinclair action-cleaning tools with cylindrical cotton rolls. With the Sinclair tool, I was pretty satisfied that I was getting my actions reasonably clean. But, as I explain below, I think the newer PMA Action Cleaning Tool Kit is easier to use, and possibly achieves better results.
PMA Tool Kit Extensively Tested with Many Action Types
PMA tried a variety of options before finalizing the PMA Action Cleaning Tool Kit. PMA explains that several shooters did a lot of testing “with various sizes of die-cut foam, patches, felts and cotton rolls with various bolt action types (BAT two- and three-Lug, Kelblys, Halls, Remingtons, Winchesters and Savages). [Testers all agreed] that the foam disc is far superior to felts and cotton rolls [and] we decided to include two different sizes of foam discs.”
The PMA Action-Cleaning Tool uses round foam discs in two included sizes: 1″ diameter and 1.25″ diameter. Both size discs can be used alone, or with a 3″ patch wrapped around them. The handles of the tools are CNC-machined blue-anodized aluminum with a silicone sleeve for grip. The PMA tool handles are a bit longer than those of my old Sinclair action-cleaning tool. I like the added handle length, and I find the design of the handle easier to use compared to the old-style round knobs.
The PMA tools are quality items. They are an improvement over my older Sinclair action-cleaning set-up. But do the PMA tools they actually clean the action better or easier than the old style cotton rolls? Well, based on my experience, the answer is a definite “maybe”.
Comparison Testing — Cotton Rolls vs. PMA Foam Discs (with and without patches)
Starting with the old-style cotton roll system, I cleaned my actions to a level I considered “clean” in the past. I then tried the included PMA foam discs. I found that, for my Remington-style actions, the larger 1.25″-diameter disc seemed to work better than the smaller 1″-diameter disc. Wrapping the larger disc with a 3″ patch definitely brought out more crud from my previously cleaned actions than the old style cotton rolls. Well, you might ask, what if you wrap the old-style cotton roll with a patch? Yes that will remove more crud too, but perhaps not as much as the PMA system. Moreover you would have to buy both cotton rolls AND 3″ patches. Not many places sell the cotton rolls.
Is it worth plunking down the $45.95 for the complete PMA system? Well, if you want to upgrade to a quality-made tool with better handles the answer is yes. Is getting that last bit of crud out of your action every time you clean it that important to you? You have to decide that for yourself. From my own perspective, I was due for an upgrade so the answer was easy. I like the PMA system, especially the new improved handles. Also, with the PMA system I don’t have to fool around with a tiny Allen screw to secure the cotton rolls — that was annoying. So my final take on the PMA Action Cleaning Tool Kit is that it is a good product with some real advantages over other action-cleaning systems.
PMA Tool charges $45.95 for the complete Action Cleaning Tool Kit that includes a chamber cleaning handle and cotton swab. PMA offers the lug recess action cleaning tool by itself with four foam cleaning discs and five 3″ patches. Cleaning discs are also available separately in your choice of 1″- and 1.25″-diameter in a five pack.
We’re excited when major barrel-makers offer new technologies that promise worthwhile performance benefits for hunters or match shooters. Lothar Walther (LW) has developed a new bi-metal barrel system that cuts weight dramatically while promising significantly-enhanced heat dissipation.
Walther’s new Ultra-Lightweight Barrels combine steel with lightweight alloys. This results in a significant weight reduction without the use of carbon fiber, epoxy binders, or other heat-retaining materials. Beginning as an LW50 stainless blank, the barrel is precision-machined to remove excess weight. An outer casing of light-weight alloys is machined and the two are fitted together without adhesives. Basically you end up with the steel inner barrel inside a larger-diameter fluted aluminum outer barrel (see diagram). This gives you the ‘best of both worlds’ — light weight for ease of carry, and thick diameter for rigidity and enhanced heat dissipation. Near the action, the barrel remains all-steel.
We haven’t tested one of these bi-metal composite barrels, but the potential for significant weight savings is obvious — aluminum is a lot lighter than steel. What’s more, a metals expert we contacted said that a bi-metal system employing fluted aluminum over steel, if assembled properly, could dissipate heat much better than steel alone (given the same diameter). Stainless steel has a thermal conductivity factor of 16. Aluminum has a thermal conductivity factor of 250.*
Our expert also pointed out that some other composite barrel systems on the market actually increase heat retention because they place insulating materials next to the inner steel barrel. (Carbon, Fiberglass, and Epoxy are all considered “insulating substances” as they have very low thermal conductivity*.) The LW system of aluminum over metal should avoid this mistake, our expert said. Lothar Walther says: “Unlike solid steel barrels, this barrel sheds heat fast. VERY FAST!”
Half the Weight of Conventional Barrels
How much weight can you save? With a 1.200″ shank diameter (except Savage) and a muzzle diameter of 0.850″, the LW Ultra-Lightweight Barrel is less than half the weight of a standard varmint barrel of the same size. Walther claims its UltraLight Barrel can be “carried for long distances and stand up to heavy firing.” This, LW says, makes these barrels “perfect… for varmint and tactical uses”.
Pre-Chambered Ultra-Lightweight Barrels Available in .22 to .338 Calibers
Lothar Walther offers Ultra-Lightweight barrels in a full range of calibers from .22LR to .338. Each Ultra-Lightweight Barrel comes complete with chamber, crown, and breech threads. These barrels are fluted by the factory. If you order a LW Ultra-Lightweight barrel, Lothar Walter provides the services of a specialist trained in building guns with these barrels. To order one of Lothar Walther’s bi-metal barrels, CLICK HERE or contact Lothar Walthar at the address below:
*Thermal conductivity is the quantity of heat transmitted through a unit thickness in a direction normal to a surface of unit area, due to a unit temperature gradient under steady state conditions. The factor values are based on this formula: W/(m.K) = 0.85984 kcal/(hr.m. °C). Here are thermal conductivty values for common materials: Aluminum, 250; Brass, 109; Steel (Carbon 1%), 45; Stainless Steel, 16; Carbon, 1.7; Brick dense, 1.3; Concrete (medium) 0.7; Epoxy, 0.35; Fiberglass, .04.
Story tip from EdLongRange. We welcome reader submissions.
Sebastian Lambang, creator of the original SEB Coaxial Rest and the SEB NEO Rest, has a new product in the works. Seb has modified and upgraded his superb NEO rest, so that it can handle heavy, long-range benchrest rifles with ultra-wide forearms. Seb calls his super-sized front rest the SEB “MAX”. As you can see in the photo below, the MAX looks like a NEO but with a wider stance and more substantial rest top. Spring rates are optimized to handle rifle weights up to 45kg (99 pounds), using appropriate counterweights. Seb hopes to complete production of fifty (50) SEB MAX rests by late August 2012.
MAX Rests Use Counter-Weights to Handle Very Heavy Rifles
When configured for use with true Heavy Guns, SEB MAX rests will be supplied with adjustable counter-balance weights in load-specific sizes. For example, a 1.8-lb counter-weight is used for a 40-lb gun, a 2.3-lb counter-weight is used for a a 60-lb gun, while a 2.6-lb counter-weight is fitted for a 70-lb gun. The basic counter-weight can be augmented with additional steel sections. Seb tells us: “The basic ‘default’ counter-weight is a 1″-diameter shaft, about 7″ long. Additional 2.5″-diameter SS ‘rings’ can be fitted on the main shaft to balance the action. When people order the MAX, they must provide the weight of their gun. I will then craft the appropriate ‘rings’ in various sizes to properly balance the weight of the customer’s particular gun and thereby make the action smooth to operate.”
Watch SEB MAX Prototype Used by Stuart Elliot
In this video, Aussie Stuart Elliot uses a prototype SEB MAX with his .300 Win Mag Heavy Gun at a 1K benchrest match in Brisbane, Australia. Stuart, who runs BRT Shooters Supply, recently won the Australian 500m Fly Shoot Nationals shooting a .300 Win Mag.
New SEB MAX Rest Based on Successful NEO Rest Design
Below is the standard SEB NEO rest. The MAX is wider and will hold a rig up to 45kg. The MAX represents an evolution of the original NEO design. As anyone who has had the pleasure of using one knows, the NEO is very smooth to operate and has a huge range of vertical and horizontal travel. In addition, the NEO can be quickly dis-assembled to store flat. The new SEB MAX can likewise be dis-assembled for easier storage and transport. Photo by R.J.Hamilton.
Sebastian Lambang has a website at www.SebCoax.com, but you won’t find info on the SEB MAX there yet. If you have specific questions, send email to: sebastianlambang [at] yahoo.com.
For USA price list and to place orders, please contact:
Ernie Bishop
306 West Flying Circle Drive
Gillette, WY 82716
ernieemily [at] yahoo.com
Phone: (307) 257-7431
ZCORR Products has introduced a new Anti-Corrosion Softcase with a built-in, vacuum-sealable VCI corrosion-barrier bag providing airtight and waterproof protection for firearms. The 42″-long main gun compartment houses a VCI storage bag that clips into the softcase. ZCORR’s clip-in system lets you secure a second long-gun bag when two-gun transport is needed. Double-gun capacity is a plus because these cases are expensive — MSRP is $249.00. That’s ten times the cost of some basic soft-skin (fabric and foam) rifle carriers.
ZCORR’s reinforced VCI bags are sturdy, being made from the same tough VCI material used in the popular ZCORR long-term storage bags. The clip-in VIC bags are designed to withstand frequent inserting/removing of firearms. ZCORR claims: “With repeated use, such as one to two shooting sessions per week, the VCI vacuum bag will last at least five years and longer with less use. After five to ten years of use customers can simply replace the VCI bag by unclipping it from the softcase and installing a replacement.”
While we like the idea of a soft guncase with serious built-in corrosion protection, it’s too bad that the case is only 42″ long. That size will hold ARs, and some short tactical bolt-guns, but it’s way too short for typical precision match rifles. At least the ZCORR Softcase offers additional compartments for handguns and accessories. There is an 11”x35” front compartment for handguns and magazines. Other shooting accessories can be stowed in two extra pockets measuring 9″×12” and 9″×9″ respectively.
COMMENT: For $249.00 one can get a quality, full-length hard-case and three or four 54″-long vacuum-sealable Vapor Phase Corrosion Inhibitor (VpCI) bags, big enough to hold a long match rifle with room to spare. A hard case with 54″ bags woud be a better solution for most precision rifle shooters than this first-generation ZCORR Softcase. Hopefully ZCORR will get the message that its current Anti-Corrosion Softcase is undersized (for bolt guns) and over-priced.
With information on over 55,000 firearms, the Firearms Guide is the most comprehensive resource on guns ever created. And now it’s bigger and better than ever. The updated 3rd Edition of the Firearms Guide is now available on DVD for $39.95 from Impressum Media.
Think of this as a digital encyclopedia of guns — the mother of all gun reference guides. The sheer amount of information is mind-boggling. The Firearms Guide covers over 55,000 models of firearms, airguns, and ammo from 500 manufacturers. Products are illustrated with 36,000 high-res color photos, plus 3,000+ schematics with parts lists for 268 gun-makers. If you’re a gunsmith or armorer, you’ll want to buy this DVD, just to have the searchable schematics with part numbers handy.
If you are a gun collector, or just an information junkie, you’ll find this DVD to be an invaluable resource. The DVD’s scope is truly worldwide, with coverage of gun makers in Western Europe, Eastern Europe, South America, South Africa and Asia as well as North America. With the DVD’s search capability you can search by gun caliber, manufacturer, and key features (e.g. “.223 Rem, Colt, folding stock”). There are 14 different search criteria — this allows you to “drill down” precisely to find the gun you want in seconds. Shown below are typical profiles of listed products:
There are some cool bonus features that significantly enhance the $39.95 DVD:
3,000+ detailed, zoomable schematics from 268 manufacturers.
500 Printable Targets: game animals, silhouettes, crosshairs, sight-ins, fun targets.
FFL Locator – Searchable database of over 62,000 gun dealers in the USA with contact info.
US-EU Ammo Caliber Chart: Cartridge equivalency charts identify the correct domestic equivalent of European ammo.
Teludyne Tech Industries manufactures a unique sleeved barrel system which, Teludyne claims, offers significant advantages over conventional steel barrels. Teludyne’s StraightJacket® Barrel System features a three-part composite construction. In the center is a conventional, relatively thin-contour steel barrel. Around that is fitted a 1.25″-diameter metal sleeve (shroud) running from action to muzzle. In the “gap” between the inner steel barrel and the outer sleeve, Teludyne pumps in a proprietary media. This lightweight fill material provides rigidity with reduced weight, and it also helps to transfer heat away from the inner barrel tube. The outer sleeve can be aluminum, carbon steel, stainless steel, or titanium — as the customer specifies. (Titanium offers an impressive combination of strength, light weight, and corrosion resistance).
Teludyne claims that a composite StraightJacket barrel is as stiff as an equivalent-diameter large-contour steel barrel, but much lighter in weight. Teludyne declares: “By pressure-fitting our thin-walled machine tubing onto your barrel and then filling the void with our proprietary media creating a new monolithic structure, we retain the necessary flexibility but add the accuracy-enhancing rigidity.”
The StraightJacket system has been around for a few years, and the U.S. Special Operations Command (SOCOM) has been testing Teludyne barrel prototypes on a variety of platforms. There have been some promising tests that show improved accuracy over long strings of fire. This has been attributed to enhanced barrel cooling. Teludyne also claims StraightJacket barrels are more accurate than conventional barrels — at least conventional factory-grade barrels. That may be a stretch. However there is some hard evidence that a composite barrel can maintain good accuracy for more shots because the composite design sheds heat better.
You can read more about StraightJacket barrels in the GunsAmerica Blog. Testers for GunsAmerica saw improved accuracy in Savage and Sako .30-06 rifles which were retro-fitted with composite barrels. With StraightJacket barrels installed, Both rifles fired impressive 5-shot groups at 500 yards: “Target after target … came back on both rifles with both guns shooting into an inch to an inch and a half at 500 yards, and it didn’t seem to matter how many rounds of standard Hornady [ammo] we put through the guns. In total, [the tester] shot 160 rounds through two guns … most at 500 yards in light to no wind on a 90° Florida day.” If those results can be believed, Teludyne may be on to something. Groups in the 1.5″ range at 500 yards are competitive with quality benchrest rigs, yet the test rifles were “box-stock” except for the composite barrels.
Fitting a StraightJacket Barrel to your Rifle
Teludyne StraightJacket barrels can be fitted to most common bolt-action rifles along with AK series rifles. Also dedicated complete uppers are offered for AR platform rifles. Send your gun to Teludyne in South Carolina and Teludyne will install the composite barrel and ship your rifle back to you about four weeks later. Centerfire bolt-action prices start at $649.00 for steel or aluminum outer sleeves. Rimfire installations cost $699.00. Titanium-shrouded barrel systems are $799.00 installed. These prices include a removable, threaded muzzle brake.
StraightJacket Barrels for Biathletes
Our friends Lanny and Tracy Barnes, Team USA Biathletes, have used Teludyne composite barrels successfully in international competition. The ‘Twin Biathletes’ have endorsed the product: “We have had outstanding groups [with the StraightJacket Barrel System] and it didn’t seem like the cold had an effect on them at all. Our first races were in Canada where it was -15 to -25 degrees Fahrenheit. While everyone else’s groups seem to spread open off of the paper, we were laying the shots down right on top of each other. After the races Tracy flew right over to Italy and the race officials were really impressed with how it shot. Your Straightjackets are really turning heads. We are excited to make history this winter and in the next Olympics in 2014. Thanks — Tracy and Lanny Barnes.” This Editor talked with Lanny at SHOT Show and she confirmed that the barrel really seems to work for her discipline. She called it her “secret weapon”. The composite barrel saves weight (over a similar-diameter all-steel barrel), and it seems to be less affected by hot/cold cycles encountered during biathlon events.
At the NRA Annual Meeting in St. Louis, Colt Firearms introduced a new bolt-action “Competition Rifle”, the M2012-CLR. Assembled by Cooper Firearms for Colt, the M2012 features a Colt metal chassis with tubular forearm, and a Cooper Arms repeater action. The M2012 rifles on display were chambered in .308 Winchester with fluted 1:10″ twist stainless barrels fitted with Surefire muzzle brakes. The bolt is a three-lug design with a Sako-style extractor. Trigger is a Timney set at 3 pounds — pretty high for a “competition” rifle. Though the barrel is only 22″, the M2012 is fairly heavy. Weight without optics is 13.2 pounds. Given the weight and short barrel, we think Colt is marketing this more for tactical shooters, rather than actual High Power or F-TR competitors.
According to the GDI Engineering website, Colt’s M2012 “appear[s] to have been built on Cooper’s Model 54 action, which features a two-position safety to the right of the bolt. [Features] include an integral 25-MOA Picatinny base and the Colt-specific chassis and stock. The single-stack detachable magazines are from Accuracy International.”
Hefty Price for Colt’s M2012-CLR
MSRP for the new M2012-CLR is $3799.00. Colt’s asking price is approximately $1300.00 more than the price of an Eliseo RTS Tubegun Chassis ($1020.00) with a Rem-clone custom action ($900.00) and a Krieger barrel ($550.00 chambered). The RTS features a 5-way adjustable buttstock, easily removed without tools. The Colt M2012 offers adjustable Length of Pull (LOP) and adjustable cheekpiece height. The M2012’s skeleton buttstock is bolted to the main chassis, requiring an Allen wrench to remove.
Forum member Ed L. (aka itchyTF) owns one of the beautifully-crafted SEB NEO front joystick rests. These units are in short supply — creator Seb Lambang can’t keep up with demand. Anyone lucky enough to own a SEB NEO would naturally would want to keep it in perfect condition, and Ed is no exception. Ed put together a system to cradle and protect his SEB NEO during transport and storage. Ed tells us: “I decided to give my NEO its own home. I only wanted to remove the leg before storage so I decided on an empty Pelican Storm IM2450 case and added my own foam. This IM2450 case is a little wider than it needs to be, but I couldn’t find anything closer and still fit the other dimensions. The blue and white foam is more rigid than the typical gray foam. The Allen wrenches are placed in the rear piece of white foam.”
Ed found the Pelican Storm IM2450 case on the internet for $103 with free shipping. This same case is sold as the Hardigg IM2450 Storm Case. All-up weight, with the SEB NEO rest in the case, is 32 pounds. CLICK Thumbnails below to view larger images.
Creedmoor Sports recently released its new 2012 catalog — with 2011 NRA High Power Champion Carl Bernosky on the cover. Last year Carl won his NINTH National High Power Championship*. There is both a traditional print version of the new Creedmoor catalog, as well as a new digital version online. In the online digital catalog, you can flip the pages just like a real catalog, view page thumbnails, and easily print out catalog pages for future reference.
In the new Creedmoor Catalog, we found some cool products you guys may not have seen before. Of course this is just a small sample of the thousands of items in the current catalog.
Malcolm Hi-Lux M73G2 Rifle Scope
Item HL-M73G21, $399.95
Modern repro vintage-style scope ideal for Vintage Sniper Rifle Matches. If you shoot a 1903 Springfield or old Mauser in the sniper matches this is just what you need. Fine cross-hair reticle with multi-coated lenses. The M73G2 features internal 1/2-MOA per click elevation and windage adjustment, with 60 clicks (30 MOA) per full turn. Total adjustment for both Elevation and Windage is 50 MOA each, i.e, 25 MOA up and down and 25 MOA left and right from the reticle’s centered position.
Blank Eyepiece
Item C1038, $6.95
This semi-opaque eye-shield clips on your shooting eyewear on either right or left side. This allows you to shoot with both eyes open, reducing eyestrain and fatigue. For cross-dominant shooters who don’t want to hold their rifle or pistol with their weak-side hand, this device can be very helpful.
Holland’s Scope Level
Item HOL-LEVEL, $49.95
There are many leveling devices on the market, but we think this is one of the best designs yet (when mounted properly). The T-6 aluminum alloy level fits on your scope tube, with the bubble level set to the side for easy viewing when in firing position. The unit, offered in 1 inch, 30mm, and 34mm sizes, can be flipped so you can place the bubble on either the right side or left side. This unit is easier to see with your left eye than levels mounting in the center of the scope.
The Score Keeper and Pit Puller (by Jim Owens)
Item JOSKPP, $11.95 (Book on CD/DVD)
Can you explain the 11 Hit Rule, the Excessive Hits Rule, the Insufficient Hits Rule, and what to do for a withdrawn target? If not, and you compete in High Power matches, you need this DVD. This useful resource can help match directors and score keepers, and it is an effective training tool for new pit workers. The DVD features over 300 color slides and shows scoring situations from both the Pit Puller’s POV and the Score Keeper’s POV.
Anschütz Shaker Pellet Box
Item AHG-1001, $19.95
With this handy item airgun shooters can sort, count and arrange pellets. This is the best set-up for holding 100 match pellets in rows, and protected from damage. (It’s easy to ding the tails of pellets, which can really harm accuracy.) To quickly fill the box, just pour some pellets into the box, press down on the side tabs, and shake gently back and forth. If you sort pellets by weight (or other criteria), you can also place the pellets individually.
*Bernosky has won the High Power Championship in 1977, 1978, 1979, 1980, 1992, 2000, 2007, 2008, and 2011. *In 1981 Carl won the Match Rifle division, but D.I. Boyd, a Service Rifle shooter, had the highest overall Aggregate.
We’ve received inquiries from readers who are looking for a gunsafe that is big and strong but can be broken down and transported more easily that a typical 800 to 1200-lb safe. One product that fits the bill is the Zanotti modular safe. It arrives in sections, none weighing more than 170 pounds. It is assembled in place, then can be dis-assembled when you need to move. The Zanotti is also well-suited for a gun-owner who lives in an apartment up many flights of stairs.
Zanotti Armor safes are ideal for gun owners who need to move frequently or who live in a location where it is difficult to position a conventional safe. Zanotti safes arrive in three or four discrete shipping boxes. The safe is assembled by the owner, on site, in six steps. The heaviest component is the door, weighing 110 pounds in the 16-gun ZAI safe, and 175 pounds in the largest 52-gun ZAIII model. Five safe models are offered, ranging from 350 to 925 pounds assembled weight, without interior. Zanotti safes are popular with military personnel and others whose jobs force them to re-locate often. The safe can be assembled in under 30 minutes with no tools other than a hammer, and all you need is a hand dolly to move any component.
Guns Magazine reports: “The panels are interlocked by 3/8 inch, nickel-plated steel “L” shaped pins that slip into steel tubing sections welded to the interior surfaces of the panels. The slip fit is held to a tolerance of .003 inch, and the safes are completely assembled and hand-fitted at the factory to insure the panels will align properly. The body is made from 1/8 inch and 3/16 inch steel; the door from 3/16 inch steel; the locking bolts are 3/4 inch steel.” This is heavier gauge steel than you’ll find on most conventional gun safes.
Zanotti offers many deluxe interiors including a system of roll-out sliding drawers in the bottom of the safe. We think the sliding drawers are ideal for storing handguns and expensive items such as cameras and binoculars that you want to keep out of plain view. Mark Zanotti, the innovative creator of these modular safes, can also customize any interior to suit the customer’s particular needs.
Editor’s Note: For most applications, a conventional safe is still the best choice. Bolted in place, a conventional safe with welded walls will provide the best security and a conventional safe can provide increased fire protection. Zanotti safes do not employ a separate layer of sheet-rock or ceramic fire lining. The Zanotti is a special product for gun-owners with special needs. The units are well-made and Zanotti offers many nice custom interior features that you won’t find even on much more expensive conventional safes.
To learn more about gunsafe features and fire-proofing, read our Gunsafe Buyers’ Guide.
We haven’t tested one of these bi-metal composite barrels, but the potential for significant weight savings is obvious — aluminum is a lot lighter than steel. What’s more, a metals expert we contacted said that a bi-metal system employing fluted aluminum over steel, if assembled properly, could dissipate heat much better than steel alone (given the same diameter). Stainless steel has a 
ZCORR’s reinforced VCI bags are sturdy, being made from the same tough VCI material used in the popular ZCORR long-term storage bags. The clip-in VIC bags are designed to withstand frequent inserting/removing of firearms. ZCORR claims: “With repeated use, such as one to two shooting sessions per week, the VCI vacuum bag will last at least five years and longer with less use. After five to ten years of use customers can simply replace the VCI bag by unclipping it from the softcase and installing a replacement.”
With information on over 55,000 firearms, the 
There are some cool bonus features that significantly enhance the $39.95 DVD:
You can read more about StraightJacket barrels in the 
StraightJacket Barrels for Biathletes
Forum member Ed L. (aka itchyTF) owns one of the beautifully-crafted SEB NEO front joystick rests. These units are in short supply — creator Seb Lambang can’t keep up with demand. Anyone lucky enough to own a SEB NEO would naturally would want to keep it in perfect condition, and Ed is no exception. Ed put together a system to cradle and protect his SEB NEO during transport and storage. Ed tells us: “I decided to give my NEO its own home. I only wanted to remove the leg before storage so I decided on an empty Pelican Storm IM2450 case and added my own foam. This IM2450 case is a little wider than it needs to be, but I couldn’t find anything closer and still fit the other dimensions. The blue and white foam is more rigid than the typical gray foam. The Allen wrenches are placed in the rear piece of white foam.”
Malcolm Hi-Lux M73G2 Rifle Scope
Blank Eyepiece
Holland’s Scope Level
The Score Keeper and Pit Puller (by Jim Owens)
Anschütz Shaker Pellet Box
