Forum Member John V.S. (aka BPD459) has a special story to tell — about rifle craftsmanship and a life-long friend. What you see below is John’s new .243 Win prone rifle. It sports a beautiful Zebrawood stock crafted by Mr. James Cloward. Here’s the story of Jim Cloward and John’s new gun:
James Cloward of Lake Stevens, Washington did the stock in just a month. The stock is African Zebrawood, with an Ebony grip cap and a WTC rail. Jim had the Zebrawood in stock. I wanted a lighter-colored stock and this blank called my name and did not eat my wallet either! Photos do not do it justice! The rifle features a Barnard action, and 30″, 1:7.5″-twist Krieger chambered in .243 Win by Randy Gregory. Sights are Warner rear and RightSight front.
CLICK Photo to See Full-Screen Version
Jim Cloward surveys the original blank.
Jim’s stock work is above reproach. His hand-cut checkering is better than a couple custom 1911s I had done by “big name” builders! When Jim refined the original Roy Dunlap stock, he created history. There is no better feeling / handling stock on the world than a Cloward Dunlap stock. I wanted him to do a Dunlap for my Barnards and we could not get it to work due to the size and trigger placement on the Barnard action. So, I just had to make due with his prone stocks — life is rough sometimes.
Respect for a Master Craftsman
I am honored to have known Jim since I was 12, and even more honored to call him a friend. Growing up, it was always “Sir” or “Mr. Cloward” when I would ask him something. When I was 35, Mr. Cloward told me “You can call me Jim now”. I felt like I was a grown-up adult that day!
I have several Cloward-built XC rifles and two other prone rifles that Jim stocked. It still amazes me how Jim can take a big piece of rough-sawn firewood and turn into artwork that’s functional and better looking than anyone else’s stocks!
Whidden Gunworks offers a nicely-engineered “bolt-on” front plate that will enhance the bench-rested accuracy of any rifle with an accessory rail on the forearm. The Whidden Track Plate fits securely in the forearm accessory rail on prone, cross-the-course, and Palma rifles. These guns typically have a narrow and/or rounded fore-end so they rock and wobble when used with a front pedestal rest. The TrackPlate cures that. Once installed it provides a rock-solid, 2.9″-wide platform that mates perfectly with a benchrest-type front sandbag. This gives sling-shooters maximum stability when testing loads or zeroing their sights or scope. Plus you can now shoot F-Class competitively with a prone gun.
The Track Plate is light-weight, has catamaran-style runners to aid tracking and prevent rocking, and can be easily stowed in a range bag. The machined aluminum Track Plate fits BOTH Anschutz-style and American-style recessed forearm rails.
The Track Plate is available from Whidden Gunworks for $40.99 or from Champion’s Choice for $40.00 (item W29P). Plate designer (and National LR Rifle Champion) John Whidden says: “The Plate is great for any rifle with a rail whether it ís smallbore, centerfire, or an air gun. Now you can try F-Class with your favorite prone rifle: the Plate has a perfect low-drag finish for riding a rest or sandbags and is competition legal in all dimensions.”
Front Bag-Rider for AR-15s from EGW
Similar to the Whidden Track Plate is a 3″-wide Delrin bag-rider from Evolution Gun Works (EGW). This was developed expressly to fit the fore-ends of AR15-type rifles with round float tubes. The EGW front bag-rider attaches to a front sling swivel stud anchor. That allows it to mount as easily as a Harris bipod — no rail needed! Just unscrew the swivel stud, put the front bag-rider in place and attach one hex-head machine screw. The front bag-rider is contoured to match the handguard profile so it fits securely with no wobble. Overall, it is a slick system. Front and rear bag-riders can be attached in a couple of minutes. The Delrin blocks slide easily in the bags and make the gun ultra-stable. The gun tracks straight back. The front bag-rider comes in two (2) variants, a $39.99 radiused version (item 32141) that attaches via swivel stud, and a $49.99 version (item 32143) that mounts via a Picatinny-style rail.
EGW AR Front Bag-Rider System
EGW Picatinny Rail-Attached Front Bag-Rider
EGW Rear Bag-Rider for AR Buttstocks
EGW also offers a REAR bag-rider that attaches via the sling swivel anchor. The EGW AR Rear Bag-Rider accessory (item 32142), designed to work with A2-style buttstocks, sells separately for $39.99. This rear bag-rider provides a longer, straight “keel” that works very well in rear sandbags, giving the rifle more stability, and improving the tracking.
J.G. Anschütz GmbH & Co. KG (Anschütz), elite German manufacturer of airguns and rimfire arms, recently announced the launch of Anschütz North America (Anschütz NA), a subsidiary enterprise based in the USA. Anschütz NA will distribute and market rifles and shooting accessories for the US market. Importantly, Anschütz NA will provide after-sales service and Warranty work for Anschütz products. Anschütz NA will commence business activities in the USA on July 1, 2014.
Jochen Anschütz, president of J.G. Anschütz GmbH & Co. KG in Ulm, Germany noted, “The USA is a powerful market with a huge demand for Anschütz premium quality rifles. Over the years, the continued interest from the American hunters and target shooters in our fine hunting and high-precision target rifles has given us the confidence to further grow and support this important market.”
“While attending the 2014 SHOT Show in Las Vegas … both I and my father, Dieter Anschütz, [realized] that not only do we need to continue to provide our excellent rifles, but [we need] also to expand our legendary Anschütz service here in America,” he said. “We feel that the best way to support this new growth is to take the distribution and sales service into our own hands.”
Anschütz NA will offer Anschütz after-sales service for all company products, as well as warranty support, repairs, spare parts, and tech info. The established Anschütz distribution chain and main dealer network in the US will continue to operate as before. To learn about Anschütz NA services, contact Customer Relations Manager Steven Boelter at: steven.boelter [at] @anschuetz-sport.com.
Model 1727F (17 HMR) Rifle with Fortner Straight-Pull Action
Gary Eliseo of Competition Machine has developed a new BX Series Tubegun system, designed for an impressive new BAT action, with a smooth, short-throw 3-Lug bolt. The new action is machined with an integral, ring-type recoil lug, which works perfectly in a tubegun installation.
Gary tells us: “We’re very proud of the new BX. We worked closely with BAT Machine of Rathdrum, Idaho to develop this outstanding system. BAT Machine took their excellent three-lug 3LL Action and re-designed the outside to fit in a special tube chassis we designed specifically for it. Two years of development and testing went into this program — we’ve had great success with our F-Class test rifle. The accuracy has been phenomenal!.” This new chassis is available in both F-Class and Long-Range Prone versions. For pricing information and expected delivery dates, call (714) 630-5734 or visit GotXRing.com and click the email link.
Angled Bag-Rider Allows Elevation Adjustment
Note the angled bag-rider or “keel” in the photo below. The angle (higher in front, lower in rear) serves an important function. This allows the shooter to “fine-tune” elevation by sliding the rifle forwards or backwards. This is very effective, and the gun stays nice and stable in the ears of the rear sandbag. No bag-squeezing required.
Story tip from EdLongrange. We welcome reader submissions.
Larry Scott, who runs GreatScottShooters.com, has a friend, Ray Mabry, who is a very talented wood-worker and carver. Ray does master-grade decorative work and checkering on gunstocks, and he also carves realistic nature subjects from wood. Larry says: “If you need stock checkering/carving or any wildlife creation, check out a friend of mine, Ray Mabry. His finished products are superb.”
Ray Mabry recently joined the AccurateShooter Forum, and you can see many fine examples of his work in this FORUM Thread. Ray tells us: “I do this work as a hobby. I do checkering and relief-carving on rifles. I also carve out of solid tupelo and bass blocks of wood. Along with rifle stock work, I carve wildlife subjects — I’ve carved eagles, owls, quail, ducks, and even prairie dogs. If you have a project in mind, call me at 270-885-6066 or send email to: rayzr [at] twc.com.”
Forum member Eric has built an innovative specialty pistol for long-range benchrest. The gun is chambered in 6.5-284 and built for IBS 1000-yard shooting. Eric originally built the gun with a 3″-wide fore-end, then decided to go with a 6″-wide offset design since the IBS no longer restricts Light Gun Forearms to three inches. Eric explained: “After building the 3″-wide stock I looked at the IBS 1000-yard benchrest rules and found out that there was not a width limit and rails were allowed for a Light Gun stock. I set out to design a 6″ version. I was thinking it should be offset also to help control torque and track straighter. I had a new 6.5mm, 1:8.5″ twist, 1.250″ HV-contour Krieger barrel. I chambered the barrel for 6.5-284 and bedded the stock.”
Eric feeds his pistol Sierra 142gr MatchKings with a load of 51.0 grains of H4831sc. Estimated muzzle velocity with this load is 2900 fps — respectable speed from the short barrel. The gun tracks remarkably well, with very little torque effect, as you can see in the video below.
After initial testing, Eric added a muzzle brake to the barrel. This tamed the recoil considerably. To learn more about Eric’s long-range 6.5-284 pistol, visit our Shooters Forum and READ this POST. To see more videos of the pistol in action (with muzzle brake), visit Eric’s PhotoBucket Album.
Forum Member Roy B. has found a website with scores of well-researched articles about guns and shooting. The Firearms History, Technology & Development Blog features a wide variety of posts on myriad subjects, from early black powder firearms to modern match rifles. The latest entry is a fascinating story on the Richardson R5 gun, an ultra-simple shotgun modeled on home-made, slam-fire weapons used by Filipino guerrilla forces. (David Richardson was a PT-boat officer who fought with resistance forces in the Philippines for three years. Hollywood made a movie based on his wartime activities in the Philippines.)
Richardson R5 Philippine Guerrilla Gun
On the Firearms History Blog, you’ll find tons of information on gun design, barrel-making, action types, and firearms testing equipment. To access hundreds of articles, click on the Firearm History Blog Archive Menu on the left side.
Sisk Rifles had been granted U.S. patent # 8,720,099 for a “Multi-Axis Adjustable Buttstock”*. Several other patents are still pending. In the meantime, gunsmith/inventor Charlie Sisk is continuing to develop more applications for his modular, adaptive stock. The complete Tactical Adaptive Rifle (STAR®) rifle stock is now available for short or long action, left or right hand Remington 700s (and clones) for $1395. Complete rifles are available for $6495, built to order. Demos for law enforcement are available on request. To learn more about this stock and other innovative Sisk products, visit Siskguns.com.
Click Photo for full-screen version:
Charlie Sisk SISK RIFLES
400 County Road 2340
Dayton, TX 77535
(936) 258-4984
Email: charlie [at] siskguns.com
*The patent is set to issue May 13, 2014, so it may not yet appear in patent databases.
On German Salazar’s Rifleman’s Journal website, you’ll find an excellent 5-Part Series on barrel chambering. The Series, entitled The Voyeur’s Guide to Barrel Chambering, is not intended to be a “how-to” instructional treatise for gunsmiths. Instead, German’s 5-Part Guide is aimed at the end user — the shooter. German explains: “This Series isn’t intended for anyone who owns a lathe; instead it is for those of us who send an action off to get a new barrel installed. Those who have the equipment know what to do and how to do it and I have nothing to teach them. On the other hand, if you’ve ever wondered just what goes into barrel fitting, this is it.” PART I | PART II | PART III | PART IV | PART V
With well-written text and dozens of very high-quality images, German takes you through the chambering, threading, shoulder-fitting, and crowning processes from start to finish. The idea is to give the “barrel consumer” a clear idea of the processes involved when a barrel blank is converted into functional form, complete with chamber, threaded tenon, fitted breech, and crown.
We highly recommend German’s 5-Part Voyeur’s Guide to Barrel Chambering. German, with the aid of John Lowther (who ran the machines), did a great job. The series has already drawn much attention from our Forum members, along with praise. After reading the articles, John C. from Australia wrote: “Your Chambering articles… really are excellent [and] informative for those of us too scared to watch our gunsmith chamber one of our barrels lest we distract him at a crucial moment!”
We know you’ll learn something from reading through German’s 5-Part Series. And if you see a photo on German’s website that intrigues you, simply click on it to see a larger, higher-resolution version. All the images in the Voyeur Series on RiflemansJournal.com can be zoomed to larger formats.
Gunsmiths often have to serve as gun “doctors” as well as gun builders. Gunsmith (and Hall-of-Fame shooter) Thomas “Speedy” Gonzalez was recently asked to fix a trigger problem. A customer was complaining about a trigger that was erratic and “mushy”. Speedy quickly diagnosed the problem. The Jewell trigger was clogged with gunk and sludge — left-over solvents and lubricants had gummed up the mechanisms. Here’s how the cleaning process unfolded…
Speedy: “Gee why would I want to blueprint my Jewell trigger….it has just got a little mushy lately. It may just need some adjustment. Yeah right — take a look at this”:
Speedy: “Should I go get a tetanus shot now?”
Gunsmith Mike Bryant comments: “I’ve seen a lot of Remington 700 triggers that were gummed up like [that] Jewell was. Also have seen lots of 700 triggers that had the weight-of-pull screw adjusted [by the owner] to where it had no compression on the spring. I wonder how many of the Remington accidental discharges involved triggers with one or the other of these conditions.”
Speedy: “What?! Powder in trigger as well… hmmmmmm.”
Clean up done with Iosso Lubricant/Cleaner. Speedy says this is the “Best parts cleaner I have ever found if you don’t have an ultra sonic cleaning tank. I just melted that crud off with a Q-Tip”.
Same Jewell trigger all happy now — clean as a whistle.
Trigger ready for final re-assembly, looking better than new. Thanks Speedy!
The Whidden 
On German Salazar’s 
