A California company, CaseCruzer, makes the nicest multi-pistol hard cases we’ve ever seen. With capacities from 3 pistols to 6 pistols, these lockable range cases hold handguns securely in angled “quick-draw” slots. In addition to the molded pistol carriers, there are slots for magazines together with a separate compartment for muffs, ammo, and other accessories. Starting at $240.00 MSRP for the Quick Draw 3-Pack, these boxes are expensive, but they offer great protection with great usability. Water-tight and dust-proof, CaseCruzer cases are airline approved (ATA 300).
4-Gun Case
The smart design of the “Quick Draw” CaseCruzer cases lets you keep your pistol locks in place during transport. There is enough clearance to stow the pistols securely even with bulky trigger-guard locks.
Wouldn’t it be cool if you could adjust the bolt cycling energy on your AR-platform rifle? Turn down the cycling rate for slow fire at the bench or varmint hunting. Crank up the energy for 3-Gun matches and rapid-fire disciplines. This IS possible with a handy accessory that fits on your barrel. Wilson Combat offers an Adjustable Lo-Profile AR Gas Block for direct gas impingement AR-type rifles. Wilson Combat’s adjustable gas block replaces a standard AR gas block and allows you to tune your AR’s gas system for smoother cycling and enhanced reliability. Wilson Combat explains: “Adjusting your rifle’s gas port will lower or increase your bolt’s cyclic rate. This tailors your rifle’s performance to your unique needs.”
A simple adjustment of the hex screw at the front of the block modulates the gas volume allowing you to tune your rifle’s function to your favorite loads. This is very handy when shooting non-standard AR calibers, unusual hand-loads, or suppressed rifles. Adjustable Gas Block systems are sold as complete kits starting at $74.95. Wilson Combat offers two diameters (.750″, .937″) and three lengths (Carbine Length, Mid-Length, & Rifle Length), so you can select the right dimensions for your rifle configuration and barrel diameter. The blocks are Chromoly steel with a Melonited finish.
Package Includes:
Adjustable Gas Block (Melonite Finish)
Adjustment Set Screw (Installed)
Straight Gas Tube (Installed, Gas Tube Pin Installed)
Annealing Made Perfect (AMP) Annealing Machine Review
Review by Bill Gravatt I had been following the progress of Alex and Matt Findlay with Annealing Made Perfect for almost three years as they pursued making the best annealing product for the private reloading market. The short explanation of why we anneal brass is to return the brass to a softer and consistent hardness after the brass has work-hardened from repetitive firing and sizing. As the President/co-owner of Sinclair International for over 21 years I saw a lot of products come through our doors that annealed brass but these products always seemed like they had very little supportive data and research behind them. Most of them were based on some type of torch system. The New Zealand-based father/son team of Alex and Matt spent these past three years addressing the challenging questions about annealing:
- What is the correct temperature to reach when annealing?
– How long should you take to get to that temp and how long should you remain there?
– How frequently should you anneal?
– Can you ruin your expensive brass?
– How do we make the process repeatable for the handloader?
– How do you accurately measure the case hardness?
They worked closely with the Electrical Engineering Department at the local University of Technology and invested a lot of capital into detailed metallurgical research. Their decision to use induction heating was because of its repeatability and the ability to reach exacting and consistent temperatures. Induction annealing is achieved by placing the cartridge in a magnetic field thereby inducing eddy currents within the brass and heating the brass without contacting the brass physically. To learn more, I suggest you visit the AmpAnnealing.com website. It is very informative.
Why should you anneal? If you are just a casual reloader, than annealing isn’t necessary but if you a serious wildcatter or competitive shooter you may want to consider it. More and more competitive shooters anneal their cases (not necessarily for adding life to the cases) to achieve more consistent pressures and velocities.
My first favorable impression was received by just opening the extremely well-packed shipping box. You could tell these guys take a great deal of pride in their product. The unit comes with three cartridge-specific pilots (you decide on which pilots), a shellholder collet, a power cord, a thorough, well-written, easy to follow instruction manual, and a USB cord for future software updates.
This machine is so easy to use that I was up and running within a few minutes. All I had to supply was the shells, the correct shell-holder and an aluminum pan to drop the hot cases into. I started annealing some unturned .308 Winchester cases (Lapua headstamp) that had four firings. First I screwed the pilot for .308 cases (#11) into the machine, placed my .308 shellholder into the supplied shellholder/collet and turned the power on. The display fired up right away and soon registered the program level that the machine was set to.
Since the machine uses induction heating, you need to set the heating level for the correct setting for the brass you are using. The alloy being used isn’t as important as the thickness or amount of brass in the neck and shoulder region. For example, Lapua and Norma have more brass in that area so the setting would be higher for these brands than Winchester brass. Also, if you have neck-turned brass, the setting would be reduced from the standard setting because there would be less mass in the air gap.
This manufacturer-produced video shows how the AMP annealing machine operates:
The settings are obtained by referring to the “Settings” section on the AMP website and are broken out by cartridge, brand, standard unturned cases, and then neck-turned cases with various amounts of wall thickness removed. A great service that AMP provides to the handloader is that you can send sample cases of your brass to them (U.S. location in Wolcott, Indiana) and they will test the hardness for you and send you the exact setting for your specific lot of brass.
My setting for unturned Lapua .308 Winchester brass was “92”. The buttons on the front of the machine allow you to adjust the setting quickly. After you set the program number, the setting is locked in after the first use until you change it again. I placed the first case in the shellholder, lowered the assembly down through the pilot and into position. I then hit the start button which illuminated immediately and then about 6 to 7 seconds later, the light went off signaling that heating was completed.
Now, be aware, these cases are extremely hot. I lifted the case out using the shellholder/collet and then dropped it into my aluminum pan. I then placed another case into the holder, put it into the machine and then repeated the process. Once I got the coordination down, I did 100 .308 Win cases in about 24 minutes. I did some 6mmBR cases later (Lapua) and annealed 100 cases in about 15 minutes at the “75” setting. I found myself raising my shop stool a little higher than normal so I was at a comfortable height in relationship to the top of the machine. Very easy to do — I actually had a student do a few cases with me and she had no problem at all following the instructions.
There is a thermal cut-off that prevents the machine from overheating. Depending on the setting, this can occur after 20 to 35 minutes of continuous use. When this has occurred, simply leave the machine on and the fans will cool it down so you can resume annealing. This isn’t surprising considering the amount of heat being generated.
All in all, I found this machine extremely easy to setup and operate. Now, does it work? I have test batches of brass that I am going to run over the chronograph in 10-round strings. I plan on running at least 10 strings of annealed brass and 10 strings of unannealed brass out of the same lot, same number of reloadings/firings and out of the same gun. I plan on alternating annealed strings and unannealed strings with a cooling off period every 20 rounds. When I do testing, I have my wife pre-label my batches as Batch A and B so I won’t know what rounds I am shooting until I get back from the range. I’ll make the results available as soon as I can. My expectation is that velocities will be more consistent based on my understanding of the lab results that the Findlays have achieved with their Annealing Made Perfect machine. For more information, visit their website at AmpAnnealing.com.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Bullets.com — 6mm Dasher Brass from Norma
It’s finally here, ladies and gentlemen — factory-made Dasher brass. That means no more fireforming! This 6mm Dasher brass has been custom crafted by Norma exclusively for Bullets.com. A special blend of brass together with special treatment of the primer pockets has produced casings that will last for many firings under normal use. The necks have been specially lengthened and are .290″ from shoulder. Overall length is 1.598″ and neck walls are approximately .013″ thick. Available in packs of 100 ($109.95) or 500 ($529.95).
NOTE: This extra-sturdy brass has a thicker rim which may not work in your standard shell holder. Custom shell holder item BL12100 is designed to accommodate the heavy rim of these cases.
2. CDNN Sports — 1911-Type .22 LR Target Pistol
Everyone should have an accurate .22 LR target pistol. This German-made GSG 1911 22LR pistol shares the look, feel, and ergonomics of J.M. Browning’s classic model 1911 so it’s good for cross-training. We’ve tried this pistol and the trigger is pretty darn good — though don’t expect it be be as nice as a S&W Model 41. But consider that the GSG costs just $249.99. By contrast, MSRP on a new Model 41 is a steep $1369.00. For cross-training and target work the GSG is a very good value.
3. Monmouth Reloading — Sig Sauer Kilo 2000 LRF, $499.00
This excellent laser rangefinder rivals other premium LRFs selling for hundreds more. Head-to-head field tests with Leica, Zeiss, and Swarovski LRFs proved that the new Sig Sauer Kilo 2000 can play in that league, but at a much more affordable price point. Sig accomplishes that with tight beam divergence and state-of-the-art DSP technology which allows the Kilo 2000 to range faster (and more reliably) at longer distances. Optic magnification is 7X. The Kilo 2000 weighs 7.5 oz and measures 3″ x 4.2″ x 1.3″.
SAVE MORE: Right now you can save an additional $110 off every Rangefinder Monmouth Reloading sells, including the Sig Kilo 2000. To save an additional $110, use Coupon Code LRF 110. That will lower your cost to $389.00 for the Kilo 2000, which is a total steal. (Time-Limited Offer!)
4. Cabelas.com — Rock Chucker Supreme Reloading Kit
Everything you see above can be yours for just $225.00, after manufacturer’s rebate. Right now, Cabela’s is selling the Rock Chucker Supreme Master Reloading Kit for $300.00. That’s a good deal as this Reloading Kit sells elsewhere for up to $360.00. But he’s the real incentive — if you spend $300.00 on RCBS products in 2016, RCBS will send you a $75.00 rebate. With that REBATE, your net cost is just $225.00 for the entire Kit.
5. Amazon — Motorola Walkie Talkies, $42.56 per Pair
Walkie-Talkies are “must-have” items for long-range shooting. The 22-CH Motorola MH230R Two-Way Radio is Amazon’s #1 Best Seller in FRS/GMRS Handheld Radios. This under-$45.00 set offers 22 channels with a claimed range up to 23 miles (We’ve used them and they worked at 3 miles line of sight). The kit includes: 2 radios, 2 belt clips, 1 dual drop-in charger, 1 charging adapter, 2 NiMH rechargeable battery packs. Run-time is about 10 hours — plenty for a full day of shooting. There is also a newer version, the Motorola T260 for $59.00.
6. Amazon — Nikon 1-4x20mm M-223 Scope with BDC, $212.46
Under the CMP’s new Service Rifle Rules, you can use an optic with up to 4.5X magnification and 34mm objective. If you have money to burn, you could purchase the excellent new Nightforce 4.5x24mm SR scope for $1950.00. Or, if you would rather put your money into barrels, bullets, and brass, you can spend a whole lot less. This little Nikon 1-4x20mm M-223 can do the job and right now it’s on sale for under $215.00! You could buy NINE of these Nikons for the price of one Nightforce SR. That certainly makes you think about priorities.
7. Grafs.com — NEW Nikon Wind Meter for SmartPhones, $28.99
Here’s a great new gadget for under $30.00. Nikon’s new Spot On™ Ballistic Wind Meter plugs directly into the headphone port on most popular smart phones. The Spot On Wind Meter reads both wind speed and direction and inputs the data directly into Nikon’s free Spot On Ballistics Mobile App (available for iOS and Android). This allows you to quickly determine and calculate wind drift corrections without needing a separate, dedicated wind meter. When not in use, the Nikon device easily fits in a pocket.
8. Amazon – Frankford Arsenal Master Tumbler Kit, $56.65
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $56.65, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. This product has received excellent reviews from verified purchasers.
Competition Machine’s Gary Eliseo is a very smart designer as well as a talented shooter. The inventor/builder of the popular Competition Machine Tubegun chassis systems, Gary has come up with something new, which he calls the PickleForks. These are rails that fit to the sides of the tubular fore-end/handguard on his chassis systems. This allows you to use a pedestal-style front rest for F-Class competition. It also provides a much more stable platform for load testing, varmint hunting, or any kind of rest-assisted precision shooting. These new PickleForks transform a Tubegun into an ultra-stable, straight-tracking rig when used with a competition-style front rest.
Gary explains: “Now you can have the same super low-boreline, long ‘wheelbase’ and vertical sides of our innovative F1 F-Class chassis system for your tube chassis. The new PickleForks attach directly to the sides of the F-Class/Tactical fore-ends, no modifications are required. They are very rigid with no flex or twist and make the rifle track like it’s on rails.” The new Eliseo Competition Machine PickleForks are offered for a very reasonable $70.00 per pair, with Cerakote finish. (You get two metal units, one for each side of the fore-arm). For more information, visit www.GotXRing.com or call (928) 649-0742.
New Product Tip from EdLongrange. We welcome reader submissions.
If you’re the kind of guy who likes to get his brass shiny inside and out, then wet-tumbling with stainless media gets the job done. For heavy-duty wet-tumbling jobs, it used to be that you had to buy a Thumler’s Tumbler and then figure out your own solution for media separation. Now there are other options on the market which may be more convenient for many users.
Lyman has just introduced its Cyclone Rotary Tumbler. For under $190.00 on Amazon.com, this ships as a complete system with everything you need — even the stainless media and media separators. The Tumbler unit itself holds up to 1000 pieces of .223 Rem brass and features a rubber lining to protect your cases and reduce noise during operation.
Conveniently, a built-in timer can be set from 0 to 3 hours, shutting off automatically. The drum features a large, screw-on end-cap to allow easy loading and unloading. In addition, the tumbler comes with two special sifter pans that make it easy to separate pins from brass. Simply empty the tumbler into the stacked pans. The first pan catches the brass, while the second, finer screen pan catches the pins. Very clever. The Cyclone Tumbler system ships with five pounds of stainless media pins and a sample packet of Brass Cleaning Solution.
Video shows Lyman Cyclone wet tumbling system in action:
TECH TIP: Wet-tumbling brass with stainless media really works. With enough “run-time” the process will definitely remove stubborn carbon on the inside of cases. However, some folks observe that case-mouths can occasionally get peened during the process. This is not a big deal but it is worth noting. In addition, with large flash-hole cases, it is possible (though rare) for a pin to stick in a flash hole. Therefore you should inspect every case before loading in a progressive press or bulk-priming cases with a bench tool.
Nightforce has released an all-new 4.5x24mm scope for Service Rifle Competition. Nightforce’s new Competition SR Fixed 4.5x24mm riflescope is purpose-built for the CMP’s new Service Rifle rules that allow scopes with max 4.5X magnification, and max objective lens diameter of 34mm. Nightforce made this new scope quite light in weight (just 15.4 ounces), recognizing that Service Rifles will now be limited to 11.5 pounds for optic and gun combined. MSRP is $1950.00.
FIELD TEST COMING — Accurateshooter.com will get one of these new 4.5x24mm Nightforce scopes for evaluation soon. We will provide a complete field test, and our tester Dennis Santiago will use the new scope in actual Service Rifle competition.
The new NF Competition SR 4.5x24mm scope provides 100 MOA of both elevation and windage adjustment, with .25 MOA clicks and 20 MOA per revolution. Parallax is fixed at 200 yards. The main tube is 30mm. This scope features a handy ZeroStop on the elevation knob that allows instant, positive return to the shooter’s chosen zero setting.
Photo shows Nightforce’s new, lightweight Unimount. Half the weight of a similar steel unit, this alloy mount offers +20 MOA taper.
The new non-illuminated SR-1 reticle features heavy posts at the 3, 6 and 9 o’clock positions, and a 10 MOA center circle with 8 MOA crosshair. The Competition SR Fixed 4.5x24mm will retail at $1950.00 and the UnimountTM SR will retail at $260.00.
Product tip by EdLongrange. We welcome reader submissions.
Here’s a smart invention — a foldable cardboard cone. With this innovative Target Cone you can easily carry a target-holder wherever you go. The Target Cone from Re-Nine Safety transports flat so it can be easily stowed in the trunk of your car (or even under a seat). When you’re ready to use it, simply fold the flaps to create a self-supporting cone with pre-printed targets on one side. Place a rock on the base to hold it steady. The Target Cone can be used by itself or, as shown below, you can attach other targets, such as Re-Nine’s new Silhouette Target (below right).
We think this is a great innovation. Keep a couple Target Cone flats in the back of your car or truck and you’ll always have a target support. For spur-of-the-moment range sessions, this is much easier than toting around a big target frame. The Re-Nine Safety Target Cones retail for about $5.00.
Father’s Day is Sunday, June 19, 2016, less than a week away. If your father enjoys the shooting sports, here are some recommended items that our staff owns or uses. All selections cost less than $100.00. It’s not too late to order. If you have an Amazon Prime membership, you can get two-day shipping in most areas of the country. For non-Prime members, most items will ship in 3-4 days. That’s enough time to get the gift to “Pops” by next Sunday.
TEN Great Father’s Day Gifts for Dad Under $100.00
The light-weight, compact RCBS Partner Press is ideal for loading at the range. It can easily be mounted to a bench with C-Clamps.
This is an excellent shooting mat — it is very well made with good padding/insulation. On gravel, concrete, or hard-packed ground this is way more comfortable than typical mats. It is wide enough and easy to fold. Any Dad who shoots would love this.
We’ve used Bog-Pod shooting supports on varmint hunts. They’re great for down-angle shots from a ridge or kneeling shots to get above terrain obstacles. Bog-Pods adjust from 17″ to 39″.
This battery pack can charge your cellphone, tablet, or even a chronograph. Our IT manager uses this battery pack to run his LabRadar Chrono. He also uses it as an emergency charger when camping and traveling. It has three outputs, allowing multi-device recharging.
Walkie-Talkies are “must-have” items for long-range shooting. The 22-CH Motorola MH230R Two-Way Radio is Amazon’s #1 Best Seller in FRS/GMRS Handheld Radios.
Plano’s AirGlide case is a unique, top-loading rifle case. Ideal for benchrest guns with wide forearms, the AirGlide case puts no side-pressure on scopes. We like the ease of loading. This fits rifles up to about 27-28″ barrels.
The versatile MTM Range Box includes cradles so you can do gun maintenance while at the range. A lift-out tray holds small items such as patches and jags. This is a durable product that can hold ammo and other gear.
Your Editor owns this watch and wears it for all special occasions. It is a very handsome quartz dress watch crafted by Orient, a division of Seiko. The hands and case are rose-gold color. At just under 8mm, the watch is very thin and comfortable to wear. The 40.5mm case features an elegant retro-styled domed crystal. This watch is also available with a silver-tone case and white face for around $130.00.
This cleverly-designed Shotshell thermos will make Dad smile. Styled just like a 12ga shotgun shell, the Stansport thermal bottle holds 25 oz. of hot or cold liquids.
This rugged 4-pistol case will hold your handguns and magazines securely. Airline-approved for checked luggage, this lockable case has a lifetime warranty. An 0-ring seal makes the case 100% waterproof and dustproof.
Until now, if you wanted good hearing protection with the ability to hear conversations and range commands, you’d employ a pair of electronic muffs with sound-cut-out circuitry*. Those electronic muffs worked but they were bulky, hot, and could interfere with your cheek weld. Now there’s a new alternative — an “Earbud Headset” that offers NRR 31-rated hearing protection along with the ability to hear conversations.
The innovative, patent-pending Razor-X Earbud Headset from Walker’s® could be a “game changer” in the hearing protection field. The noise-activated, sound protection hardware is contained in a padded collar that fits comfortably around your neck. Small earbuds with foam tips fit in your ear providing 31 dB of noise protection. The microphones in the headset allow you to hear normal conversations and range commands. Two versions of the Razor headset will be offered: Basic Razor-X ($119.00 MSRP) and the deluxe Razor-XV ($159.99 MSRP) with Bluetooth capability.
Razor-X Features:
• Retractable Digital Ear buds
• 31 dB NRR (Noise Reduction Rating)
• Sound-Activated Compression (SAC)
• Rechargeable 250mAH battery with 10 HR run-time.
• Hi Gain omnidirectional microphones.
• HD speakers in the ear buds for good audio quality.
• Includes 3 pairs of 12mm foam tips (S/M/L) and two pairs of 16mm coated foam tips (M/L)
• Auto-Shut Off (low power mode) after 4 to 6 hours.
• Integrated Micro USB port with charging cord.
• AC wall adapter with USB port for charging.
• Patent Pending Technology
• MSRP: $119.99
Walker’s product information states:
The Razor-X incorporates a neck-worn device featuring comfortable, retractable ear buds. The “behind the neck” design allows for ZERO interference with you or your weapon, allowing you to focus on your target. These … patent-pending buds allow the user to be in loud environments without damaging their hearing, providing an impressive 31 dB of noise reduction.
The Hi Gain omni-directional microphones provide clear sound enhancement for enjoyable conversations on the range or to hear firearm instructors’ directions while training. The Razor-X HD digital speakers provide a wide range audio quality that enhances the users experience. The kit includes two different styles of noise-reducing foam tips in a variety of sizes to ensure a proper fit for maximum noise reduction. The Razor-X is equipped with an auto-shut off (low power mode) after 4 to 6 hours. The timer will reset and the unit will wake up after any button is pressed. An AC wall adapter with USB port and a one-meter micro USB cord is provided for convenient charging.
*There are some high-tech “in-ear” electronic systems with noise-activated protection, but these are typically quite expensive and not commonly used by shooters.
I had been following the progress of Alex and Matt Findlay with 
