You’ve heard the rumors of a new ultra-high BC 7mm bullet from Berger. Well the rumors are true. Berger is now shipping test samples of its new 195-grain 7mm Elite Hunter Bullet, part # 28550. This bullet boasts jaw-droping 0.755 G1 and 0.387 G7 Ballistic Coefficients. Those are stunningly high numbers. Compare that to 0.674 G1 and 0.345 G7 BCs for the previous BC king amoung 7mm projectiles, Berger’s own 180 gr Match Hybrid Target.
We’re certain the “orange box” 195gr Elite Hunter will soon see use by F-Open competitors. This ultra-high BC projectile could be a “game-changer” in long-range shooting when used in cartridges such as the 7mm RSAUM, 7mm WSM and even bigger 7mm magnums. Recommended barrel twist rate is 1:8.3″, with a stated “minimum” twist of 1:9″.
We ran some numbers through the JBM Ballistics program*, comparing the new 195-grainer with Berger’s popular 180gr Hybrid. The results were eye-opening. The projected drop is significantly less. Most importantly, this new 195gr bullet moves a LOT less in the wind at 1000 yards. This should translate into higher scores for F-Class shooters — that wide ‘9’ shot may stay in the ’10’ ring. In fact, based on the JBM trajectory calculation, with a 10 mph 90° crosswind, the 195gr bullet will have over SEVEN INCHES less wind drift at 1000 yards than the 180-grainer (46.0″ vs. 53.1″). That’s a big deal, a very big deal…
Drop at 800 yards: 135.5″
Windage at 800 yards: 28.0″
Drop at 800 yards: 140.9″
Windage at 800 yards: 32.2″
Drop at 1000 yards: 237.9″ Windage at 1000 yards: 46.0″
Drop at 1000 yards: 250.0″ Windage at 1000 yards: 53.1″
Drop at 1200 yards: 380.1″
Windage at 1200 yards: 69.6″
Drop at 1200 yards: 404.2″
Windage at 1200 yards: 81.2″
* Variables were set to 55.4° F, 1000′ elevation, standard Atmosphere at Altitude, 2950 fps muzzle velocity. You can use JBM Ballistics to compare at different MVs.
UPDATE from Berger
After we broke this story, Berger Bullets wanted to clarify some points. Berger explained:
“This bullet is in the testing phase and has not been officially launched. We sent this bullet out for some public testing to make sure that we had positive feedback before we moved forward with an official launch.
We want to see how it performs in multiple rifles and different chamberings.
This bullet was made for hunting purposes, we realize there are shooters who would like to take these out for target shooting, like F-Class. However, we are not certain how they will perform. If things are successful we would like to eventually launch a target version.”
The information on the label you have pictured on your article has been updated.
Twist Rates
Minimum: 1:9″
Optimum: 1:8.3″
Ballistic Coefficients
G7 BC: .387
G1 BC: .754
How to Get Berger’s 195gr Elite Hunter Bullets
These bullets are so new you won’t find them on the Berger Bullets website yet. As Berger explained above, these bullets are still in a final testing phase. Most of the early production runs have been sent out for testing purposes. If you have specific questions, you can send an email to Berger via this CONTACT PAGE. Otherwise you can phone Berger, Mon-Fri, at 714-441-7200. Please try the email option first.
Here’s an interesting new F-Class Barrel Block Stock from True-Flite NZ Ltd. in Gisborne, New Zealand. This innovative design features a fore-arm barrel block that clamps around the barrel, allowing the action to free-float. We like the way a wood lower section (with pistol grip) is mated to the metal “spine” of the chassis. That creates a nice look and feel.
The folks at True-Flite state: “This stock has been designed by Steve Mann, and was developed in house here at True-Flite. Utilizing a 150mm barrel block, which clamps the barrel into the stock (allowing the action to free float), enables us to fit large, full-profile barrels, and still keep under the 10 kg weight restriction when running a Nightforce scope. This stock tracks like a demon, making it a very competitive rig.”
While this chassis is designed for the New Zealand-made Barnard actions, it can also work with other round actions. Target Shooter Magazine notes: “The great thing is, because the action is unstressed, you can get away with using … a Remington — rather than forking out for a custom action.”
Barnard Model P Action from New Zealand
Here’s a Barnard Model P action, which was originally developed in 1982. These three-lug actions are very smooth. They are popular with Palma rifle shooters and F-Class shooters. Designed for the Palma or long-range shooter, the Model P Single shot action is available in right-hand or true left-hand configuration (with other bolt/port configurations in the Model PC).
The bolt carries three forward locking lugs, is equipped with a Sako-style extractor and can be supplied to accept any case rim up to 0.534″(standard magnum rim). The Bolt undergoes finish machining after hardening, and is hand-lapped to its mating receiver. The receiver is 4340 chrome/moly/nickel steel, through-hardened to 38 RC and finish-machined after surface hardening to ensure concentricity.
Note, this is a limited-time offer with Free Solution (August 2015).
So, what do you do with wet cartridge brass after ultrasonic cleaning or wet-tumbling with stainless media? Most of us just dump the brass into a plastic strainer or a colander, shake the casings a little to get the water out, then let the brass air-dry on a tray. We don’t recommend drying brass in a hot oven. If, by mistake, you leave your brass in the oven too long (or set the temp too high), you may slow-anneal your brass, which can end up weakening the brass.
If you can’t wait for your brass to air-dry naturally, there is another solution. Frankford Arsenel now offers a brass dryer that can dry up to 1000 pieces of .223 Rem brass or 2000 pieces of 9mm pistol brass. Yes, here’s yet another gadget for your man cave/reloading center. This unit employs forced air convection heating to dry brass quickly without water spots. This “Platinum Series” Brass Dryer features five (5) removable drying trays so you can dry different types of brass (without mixing) at the same time. Frankford says the max air temperature in the machine is about 160° F — that won’t over-cook your brass. And the “forced air flow” system distributes heat evenly.
Frankford Arsenal Brass Dryer Features
Specifically designed to dry brass after Rotary Wet-Tumbling or Ultrasonic cleaning.
Vented trays provide optimal airflow to minimize drying time.
Top-mounted fan, circulates up to 160°F air to quickly dry the brass inside and out.
Five (5) removable trays easily dry up to 1,000 pieces of .223 brass in less than 1 hour.
Free Cleaning Solution with Frankford Arsenal Brass Dryer
Currently, Grafs.com is offering a FREE 30-oz. bottle of Ultrasonic Brass Solution with every Brass Dryer unit sold. A $15.99 value, the solution goes a long way — you mix it at a 40:1 ratio with water. And, Frankford Arsenal claims: “Our Cleaning Solutions are so strong that they can be used for multiple cleaning cycles before having to mix new solution”.
New S1 and S5 Knurled Dials can be user-installed in place of older Leupold turret caps.
Leupold & Stevens makes good scopes, but the standard turrets with screw-on caps are inconvenient for some users. It’s too easy to misplace the caps. Also the standard turrets are not the easiest to grip, particularly with gloved hands. To improve the “gripability” of its scope turrets, Leupold now offers new S1 and S5 screw-on knurled dials that fit in place of the cap covers. These aluminum dials offer large, knurled surfaces that are easy to grip, even when wearing gloves. “These screw-on dials mean no more lost caps or the need for a coin to make adjustments in the field,” said Tim Lesser, Leupold’s Product Development Director. The S1 is for MOA scopes while the S5 is for MIL scopes.
The S1 and S5 dials simply replace Leupold’s screw-on turret caps, so the user can install these easily without tools. It is NOT necessary to send your scope(s) back to the factory. Just remove the caps on your windage and elevation turrets, and screw the knurled dials in their place. The S1/S5 dials automatically align with the adjustment slot and securely tighten down. These dials are interchangeable between different riflescopes in the field. MSRP is $50 per dial set (either S1 or S5).
The S1 dial is engraved in ¼-MOA increments while the S5 (for mil-based turrets) is marked in 0.1 MIL. Both come with a locking zero stop and can be equipped with the Custom Dial System® (CDS) through the Leupold Custom Shop. The Leupold S1 and S5 dials are compatible with most Leupold riflescopes with click adjustments, with the exception of the VX-1 series and older riflescopes with friction adjustments. For those with bullet-drop-compensating reticles, the S1 and S5 are completely compatible. The screw on dials are covered by Leupold’s full lifetime guarantee.
Every week Brownells Merchandise Manager Paul Levy hosts a video featuring new products. We’ve seen these vid clips before, but three products in this week’s video really caught our attention. We like the new MTM Ammo Crate, and the new Durablue coating offers a great option for gun-owners who want a traditional-looking finish that is also durable. And for AR-10 owners, the gold-tone Titanium Nitride Bolt Carrier group promises smoother running with easier cleaning.
Products featured in this week’s video include:
MTM Ammo Crate. Wide, flat polymer box features O-ring seal for water resistance, and stackable shape for convenient storage. Integral handle makes for easy transport. Holds up to 85 lbs. of ammo, magazines, and any other type of supplies or gear. Available in 4½”- and 7¼”-deep models.
Titanium Nitride is an extremely robust, durable coating, and now it’s available on an AR-10 bolt carrier group. The new Prime Weaponry .308AR Titanium Nitride Bolt Carrier Group drops into AR-10 type .308 AR uppers. The tough gold-tone finish resists wear and corrosion, plus the slick surface speeds up the cleaning process.
Duracoat DuraBlue is a new spray-on coating that provides a deep, glossy finish like traditional bluing but without the worry of rust, scratches, or high cost. DuraBlue comes in an aerosol can or liquid form (for application with sprayer) in both glossy black and traditional blue. DuraBlue can be used on on all kinds of metal, even stainless steel and aluminum.
Believe it or not, legendary German gun-maker Walther Arms has never produced a .45 ACP pistol. Until now that is. You see Walther just announced that it will (finally) build a handgun, the .45 ACP PPQ, chambered for the classic .45 ACP cartridge. John Moses Browning would approve.
The striker-fired, polymer-framed .45 ACP PPQ boasts a smooth, 5.6-lb trigger with a 0.4″ normal travel and a 0.1″ reset. The 4.25-inch barrel features polygonal rifling (like HK barrels). Both slide and barrel have a hard Tenifer finish (like Glocks). The new .45 ACP PPQ includes ambidextrous controls, slide serrations, and front Picatinny rail for mounting accessories. The pistol holds 12 rounds and is equipped with three internal safeties. Overall length is 7.4 inches, and width is 1.3 inches.
Walther Arms’ VP of Sales and Marketing, Cyndi Flannigan, states: “This new caliber and product offering is a benchmark for Walther and the PPQ. We have built it to the same exacting German standards that deliver the ultimate home defense and personal protection firearm.” The new M2 .45 ACP PPQ pistol is expected to ship to dealers in early October, 2015.
There are a wide variety of reloading tools designed to cut a slight chamfer in case necks and deburr the edge of the case mouth. You don’t need to spend a lot of money for an effective tool. A basic “rocket-style” 45° chamfering tool, such as the Forster, actually does a pretty good job taking the sharp edge off case mouths, particularly if you use a little scotch-pad (or steel wool) to smooth the edge of the cut. The $17.49 Forster chamfer tool, shown below, is a nicely-made product, with sharper cutting blades than you’ll find on most other 45° chamferers.
Many folks feel they can get smoother bullet seating by using a tool that cuts at a steeper angle. We like the 22° cutter sold by Lyman. It has a comfortable handle, and costs just $10.45 at MidsouthShooterssupply.com. The Lyman tool is an excellent value, though we’ve seen examples that needed sharpening even when new. Blade-sharpening is easily done, however.
Sinclair International offers a 28° carbide chamferer with many handy features (and sharp blades). The $29.99 Sinclair Carbide VLD Case Mouth Chamfering Tool will chamfer cases from .14 through .45 caliber. This tool features a removable 28° carbide cutter mounted in the green plastic Sinclair handle. NOTE: A hex-shaft cutter head power adapter can be purchased separately for $14.99 (Sinclair item 749-002-488WS). This can be chucked in a power screwdriver or used with the Sinclair Case Prep Power Center when doing large volumes of cases.
K&M makes a depth-adjustable, inside-neck chamferer (“Controlled Depth Tapered Reaper”) with ultra-sharp cutting flutes. The latest version, which costs $45.00 at KMShooting.com, features a central pin that indexes via the flash hole to keep the cutter centered. In addition, the tool has a newly-designed handle, improved depth-stop fingers, plus a new set-screw adjustment for precise cutter depth control. We caution, even with all the depth-control features, if you are not very careful, it is easy to over-cut, slicing away too much brass and basically ruining your neck. We think that most reloaders will get better results using a more conventional chamfer tool, such as the Forster or Lyman.
One last thing to note — tools like the K&M and the Sinclair chamferer are often described as VLD chamferers. That is really a misnomer, as bullets with long boat-tails actually seat easily with very minimal chamfering. In reality, these high-angle chamferers may be most valuable when preparing brass for flat-base bullets and bullets with pressure rings. Using a 22° or 28° chamferer can reduce the risk of cutting a jacket when using VLD bullets though — so long as you make a smooth cut.
Forum member Alex W. (aka “zfastmalibu”) came up with a clever adaptation of an item you may already have on your kitchen counter. By drilling a few strategically-placed holes in a wood knife-holding block, Alex created a handy, 20-round ammo holder for the bench. We’re not sure the wife will appreciate the new holes in her kitchen accessory, but we think this is a smart invention. Alex asked fellow Forum members: “What do you think, is there a market for it?” We think there is. Of course, with a ruler and an electric drill you could probably make your own version easily enough.
Get a Solid Wood Knife Block for under $25.00 Hardwood Knife blocks can be purchased for under $25.00 through Amazon.com. They are also available in bamboo ($18.14), beechwood ($39.95), acacia ($49.95), and solid walnut ($59.95).
Birchwood Casey has released an innovative Solid-Film Lubricant Pen that may be useful for some gun applications where conventional oils and greases are not appropriate. The Pen dispenses MLP Solid Film Lubricant, a semi-permanent, lacquer-like coating containing molybdenum disulfide (MoS 2) and corrosion-inhibiting elements.
Using the Pen, a low-friction lubricant coating can easily be applied to various friction points to reduce wear. Common application points on AR-style rifles include: charging handle, take-down pins, inside of bolt carrier, and mag well.
We can also see a use for this product on buttstock adjusting points, bipod joints/hinges, sling swivels — wherever a non-greasy lubricant can aid function. NOTE: We do not recommend this product for lubrication of bolt lugs on bolt-action rifles — we still think a high-quality grease-type lubricant is best for bolt-lug applications and other high-load points.
This Video shows where to apply Dry Film Lubricant on an AR-type rifle.
Birchwood Casey’s MLP Solid Lubricant Pen meets Mil-Spec requirements. The formula creates a tough, low-friction coating that helps prevent corrosion, galling, and seizing. IMPORTANT: after application, you should allow the dry-film coating to DRY for at least 6 hours before use.
Birchwood Casey claims that: “Once applied, MLP Solid Film Lubricant is virtually unaffected by atmospheric and fretting corrosion, solvents, acids, oils and degreasers. MLP Solid Film Lubricant operates at temperatures ranging from -320° to +300° degrees F.”
At SHOT Show 2015 Bullets.com President Shiraz Balolia signed a contract with Norma to produce a large quantity of ultra-high-quality .284 Winchester and 6mm Dasher brass. The .284 Win brass is now in the USA and it is very good indeed. Now .284 Win and .284 Shehane shooters have a true premium product, without having to neck-up 6.5-284 brass. In addition, special enhanced quality-control measures were employed by Norma (as a condition of the Bullets.com contract) to ensure this brass is very uniform and very long-lasting. Expect the primer pockets to stay tight for a long time, even with stout loads.
This custom-made .284 Winchester Brass from Norma is double-drawn for body consistency and the heads are double-stamped for longer primer pocket life. This “special run” brass, created exclusively for Bullets.com, is produced to extremely high tolerances from high-grade raw materials.
Bullets.com President Shiraz Balolia (left) and Norma Managing Director Paul-Erik Toivo sign contract for ultra-high-grade Norma brass.
Check it out on our website: http://bit.ly/1KpiVh2
