Editor: This article is from the Powder Valley Website. The original release date was in October, 2020, BEFORE the election, so some factors have changed. But we are still seeing extreme shortages of primers.
If you’ve tried to purchase ammo or reloading supplies lately, you’ve probably noticed a lot of products are out of stock. Of all the components needed to reload ammo, it seems primers are the toughest to find, prompting many reloaders to refer to the current crisis as “The Great Primer Shortage of 2020″. The primer supply shortage doesn’t just affect reloaders, though. It’s also limiting the production of many popular types of ammunition. This can be frustrating for shooters and hunters looking to keep their edge on the range, and can be concerning for preppers, survivalists, and others who are concerned about their safety.
We are in the midst of the greatest primer shortage of all time, and we don’t see things getting better anytime soon. Read on as the experts from Powder Valley delve deeper into the primer shortage of 2020.
A Massive Increase in Demand
Like any other product in a market economy, primers are subject to the whims of supply and demand. As far as demand is concerned, a perfect storm of factors has caused a run on the ammo market like we’ve never quite seen before. A mix of the Covid-19 pandemic, civil unrest, and the possibility of an anti-2nd amendment President and Senate has caused demand to skyrocket. The pandemic specifically has incentivized shooters to learn how to reload their own ammo.
We have an extremely large number of new reloaders who have entered the market. The NSSF estimates that first time gun owners has increased to 6.2 million people over the past few months. [Editor: Vista Outdoor says the number may be 7 million by the end of 2020.] Unfortunately, many of those reloaders entered the market anticipating that it would be easier to make their own ammo since readily available ammunition was so difficult to find. With shortages of bullets, powder, brass and primers, that has simply not been the case
Since so many people have lost a chunk, or all of their income, it makes sense that reloading, which saves on the cost of ammo at the expense of time, would become more popular than ever. Even if you’re financially stable, reloading and shooting are great socially distant activities you can do while the movie theaters, bowling alleys, and bars are shut down. With little answers on the virus, it’s hard to see when these closures and limitations will end. This is why we believe this could end up being the greatest primer shortage of all time.
Hoarding of Primers
When there is a primer shortage the first thing people normally point to is consumer hoarding. We believe this is having an impact on availability, but probably not to the extreme that many think. There are definitely some profiteers who buy primers and then sell them on auction sites or other multi list sites. This is why many online retailers have now chosen to limit the purchase quantities to an extreme low level in an effort to reduce this.
Disruptions in the Supply Chain
Demand, however, is just one part of the story. Disruptions in the supply chain have also made a big impact on the availability of primers. When it comes to ammunition supplies, bullets are easy to manufacture, brass can be re-used, and powder is generally stockpiled by companies (though perhaps not the kind you’re looking for). This leaves primers, which are relatively difficult to make, as the component that causes the bulk of ammo shortages.
In the USA, only four companies (Winchester, Remington, Federal, and CCI) manufacture primers for civilian use, law enforcement, and the military. Even under perfect circumstances, there’s only so much they can produce at once, and needless to say, circumstances have not been perfect during the pandemic. People getting sick, missing work to take care of their kids, and self-quarantining – from factory workers to delivery drivers, and all throughout the supply chain – caused a lull in manufacturing this spring.
The Remington bankruptcy has had a large impact on the shortage of ammo and primers. With Remington in a state of financial insolvency for the past two years, suppliers were demanding payment upon delivery for products. Remington simply did not have the financial capabilities to have an abundance of raw materials on hand and had to shutter some of their production capacity. Barnes bullets and primers were hit particularly hard in the reloading market. With the recent purchase of Remington by Vista Outdoor, there is a good chance that Vista will be diverting CCI and Federal primers that would typically go to reloaders to Remington ammunition production. Remington primer production capacity has never been great. The hope would be that Vista will place more emphasis on getting the Remington primer production capacity increased substantially and quickly. The best news coming out of this is for Barnes fans. With Sierra’s purchase of Barnes we anticipate the availability of Barnes bullets to increase substantially in a very short period of time.
Reduced Supplies of Foreign-Made Primers
In 2008 we saw a huge influx of Russian primers. We are not seeing that this time as the Murom Apparatus Producing plant is only producing at partial capacity due to the COVID-19 restrictions. On top of that, there have been changes in upper management at Murom which have caused further disruptions. But, we are very hopeful that these changes will have a positive effect on production and distribution in the long run.
The situation has been worsened by dramatically reduced imports of Russian primers.
With import restrictions out of Russia, we do not anticipate seeing the help we had from them in 2008-2012. We had also seen S&B, Unis Ginex and other foreign brands of primers enter the market during the shortages to relieve some of the pressure, but aren’t seeing that influx of primers this time around. The lack of foreign primers on the market is a major reason we believe this shortage is going to last for quite some time. We may see some help from foreign primers, but we don’t anticipate the large volumes we’ve seen previously.
What Should You Do? As an individual, as of right now, there’s little you can do in the face of the reloading equipment supplies shortage. Keep checking your trusted online distributor Powder Valley for new arrivals of primers from all four manufacturers.
We have created some very stringent limitations on the purchase of primers in an effort to help as many people as possible work through this extremely tough time. Normally, we would say “stock up”. But that time has passed, and I would encourage everyone to learn from this. Stock up in times of plentiful supply so that you are not affected as greatly during these times of extreme shortage. In the meantime I would encourage everyone to pray for our country and our leaders[.]
This image is from multi-time Nat’l Long Range Champion Nancy Tompkins, author of Prone and Long Range Rifle Shooting. Nancy loves to photograph the Aurora Borealis.
As a Christmas present for our readers, today we showcase eight very informative videos from AccurateShooter Forum member F-Class John. A talented F-Class competitor with a smart, technically-focused mind, John has created a series of videos about reloading and precision loading tools, along with rifle and shooting accessories. Many of John’s product reviews are the most thorough and detailed you’ll find in video format. You’ll find over 120 informative videos on F-Class John’s popular YouTube Channel.
21st Century Hydro Press and Arbor Press — Product Review
Many of the world’s top benchrest, long-range, and F-Class shooters prefer to seat their bullets using arbor-type presses with inline dies. This allows smooth, repeatable bullet-seating with very low run-out. One of the very best arbor-type seating presses ever created is the 21st Century Hydro Press. This offers plenty of leverage driving a precision ram. The Hydro Press also features a hydraulic line to drive a precision seating force gauge. Along with the Hydro Press, John tests 21st Century’s standard arbor press.
Cartridge Case Separation — Tell-Tale Warning Signs
If you reload and haven’t experienced a case separation yet then you are fortunate. It’s a fact of life in the shooting world. A bad case separation can have very unfortunate consequences. Therefore you need to watch for warning signs on your cartridge brass, so you stay safe. The video above shows what to look for — and how to recognize signs of incipient separation. One important factor leading to case head separation is improper head-spacing causing growth. To learn more about case head separation watch F-Class John’s follow-up video Case Head Separation Causes, identification and prevention.
Accuracy One Concentricity Gauge — Product review
Every person who makes precision hand-loads should have a quality concentricity gauge to measure run-out of case-necks and loaded rounds. Here John tests one of the best such tools on the market, the Accuracy One Concentricity Gauge. This measures the internal and external neck runout of cartridge cases as well as seated bullet runout. It can also measure the runout of the ogive, bearing surface, and boat-tail of individual bullets and can even measure primer pocket runout. John notes: “I think most precision shooters should have one of these to make sure their ammo is within their specs they’re happy with.”
How to Use a Barrel Tuner to Improve Accuracy and Repeatability
In this video, John works with a barrel tuner created by Erik Cortina, a member of Team Lapua/Brux/Borden. A tuner can be useful in modulating barrel vibrations and that can translate to smaller groups on target. Sometimes the positive effects are quite noticeable. Tuners have been popular with short-range benchresters for many years and now they are becoming more common on top F-Class and Long Range rifles.
John says: “I’ve been using Erik’s E.C. Tuner for a while now and I really like what it’s done to help as my final step in load development. Just remember, a tuner is a tool, not a magician. You still need good load development practices, good brass prep, and solid skills but the tuner does help make great loads even better.”
Teslong Rigid 26″ Borescope with 4.5″ Monitor — Product Review
There are a variety of affordable Teslong digital borescopes for inspecting your barrels and diagnosing issues. All Teslongs deliver impressively sharp images/video. Some units plug into a laptop or tablet, while others work via a dongle to communicate wirelessly. Here John tests a 26″ rigid model borescope that comes complete with its own 4.5″ viewing screen. Priced at $129.99 on Amazon, this system is completely self-contained — you don’t need a laptop or smartphone. You don’t have to worry about connections and there are no Apps to install or configure. John says: “Teslong now offers a 26″ rigid rod model with a 4.5″ monitor. This allows you to use the unit without the need for any mobile device or computer.”
Dillon 550 vs. Dillon 750 for Precision Reloading — Pros and Cons
Progressive presses are not just for bulk reloading these days. Many top shooters, including 5-time National Long Range Champion John Whidden, use Dillon progressive presses to complete many cartridge loading operations more efficiently. Even in the F-Class world, Top Guns such as Erik Cortina have found ways to use Dillon progressives for bullet pointing, case prep and other repetitious tasks, even if a precision arbor press is used for final bullet seating. In this video, F-Class John compares two Dillon options: “If you’re deciding between a Dillon 550 or 750/650 reloading press for precision reloading, here are some pros and cons of each. Both are capable of producing high quality ammunition but each has their own quirks so knowing your capabilities and loading style is important when choosing one over the other.
AutoTrickler V3 — General Set-Up and Operational Advice
In this video, John offers some general advice for setting-up the AutoTrickler system. He notes that you want to set the initial drop weight (from the powder measure) in an optimal range: “When you set the original drop you need it to be about 1 to 1.5 grains below. Some people set it too close to the final weight they want and it actually doesn’t let the trickler unit work as efficiently, consistently and accurately as it will if you start 1 to 1.5 grains low.” John also explains how to hook up the cords and how to position the trickler unit. John places his AutoTrickler on a 30-lb piece of granite, with a thin polymer “anti-static” pad on top. John also uses a line conditioner and grounding wire to provide the best electrical flow to the scale and trickler. John also shows how the angle of the trickler unit can be adjusted. If you own an AutoTrickler or plan to purchase one, we definitely recommend you watch this entire video.
ShotMarker Power-User Tip — How to Test Unit without Shooting
The ShotMarker is an advanced system that plots shot location using electronic sensors mounted on a frame. ShotMarker arrays are now used in many competitions because they are reliable, precise, and much more affordable than competing systems. Invented by Canadian Adam MacDonald, the ShotMarker plots bullet entry on target using sensors activated by the bullet’s soundwaves. Using 8 high precision MEMS microphones placed in the corners of your frame, ShotMarker precisely measures the point of impact and down-range velocity of each shot, so that you can analyze your groups and shoot for score in competition. In this video, John shows how you can quickly and easily test your ShotMarker before deploying it at the range: “Here’s a quick and simple way to ensure your system is working 100% before taking a shot on it.”
Our friend Gavin Gear of UltimateReloader.com has tested the nicely-crafted Buchanan Hand Press. This symmetrical, twin-lever tool can handle pretty much any sizing and/or seating task as it offers plenty of leverage — even for full-length case resizing. Crafted by Buchanan Precision Machine, this Hand Press has a central mount for the die on top with a conventional shell-holder at the bottom. There is a handy spent primer catcher, plus an optional Lock-N-Load die insert adapter (Top Plate). This press is well-built, but the $250.00 price is steep. There is also a basic version without upper plate for $200.00, but even then you could buy FOUR Lee Hand Presses for the cost of a Buchanan.
You can see how this press works in this UltimateReloader video. Gavin demonstrates all the key functions, including decapping, sizing, and bullet seating. You can see that Gavin was impressed with this hand press, which is well-suited for loading at the range:
Gavin explains that the modern Buchanan Hand Press is based on a previous design: “This press is an evolution of an old press that has been out of production for years: the Huntington Industries Decker Hand Press. While it shares some of the basic design features, the Buchanan Precision Machine Hand Reloading Press takes quality and functionality to the next level. This press accepts standard shell holders, uses standard 7/8×14 dies (or dies with Hornady Lock-N-Load bushings as I showed in the above video), and has a COL capacity of 3 3/4″. Need to load 30-06 away from the bench? No problem, this press can handle it. Unlike other hand presses, this one stands by itself on a flat/level surface, and can be clamped to a bench in order to stay in one spot.”
Clearance Check — Remove the seating stem and drop a bullet into it. The farther down the ogive or nose-cone the step recess grips the bullet, the better. If it’s only pressing down against the bullet tip, a crooked seat is assured, along with inconsistent seating depth. — Glen Zediker
Some folks acquire a new seating die and then are surprised to find their hand-loads show crooked bullets and/or inconsistent seating depth. The problem could be a mis-match between the bullet and the die’s seating stem. In some case, particularly with long, streamlined bullets, the bullet tip can actually touch the bottom inside of the stem. This can cause a variety of problems, as Glen Zediker explains…
Invest in a Good Seating Die Reloading Tip by Glen Zediker
The bullet seating operation is the “last thing” that happens and it’s also the one thing that can corrupt the care and treatment given to the quality of the loaded round prior. A sleeve-style seater, well-machined, goes a whopping long ways toward preserving alignment, and, therefore, concentricity. Also make sure that the stem in yours comes to rest well down onto the bullet ogive, and, above all else, is not contacting the bullet tip! That will wreck a round.
If you have this problem, you should contact the die maker — some will offer a different seating stem expressly designed for longer, pointier bullets. This “long bullet stem” will normally drop right into your existing die. If you plan to run long, VLD-style bullets you should request the special seating stem right from the get-go.
NOTE: Glen Zediker passed away in October 2020. He will be missed — his books were important additions to the gun world’s knowledge base. This tip comes from Glen’s book, Top-Grade Ammo, available at Midsouth Shooters Supply.
With ammunition in short supply these days, we know ammo production is on people’s minds. Top industry leaders have said the USA will face ammo shortages well into 2021. So ammo-makers big and small are ramping up production to meet demand. If you’re curious how ammunition is created on the assembly by a relatively small, speciality manufacturer, watch the video below to see the entire process, start to finish.
This video from Fog Ammunition reveals how .223 Rem ammo is made. Starting with boxes of bullets and bags of cartridge brass, this video shows how components are bulk-sorted, then .223 Rem ammunition is produced on a modern, linear multi-stage loading machine. In assembly-line fashion, cases are primed, powder is added, bullets are placed, final seating depth is set, and then the case is crimped.
If you’ve never seen an automated loader in action you should definitely watch this video. With this kind of machine, a new round is produced every second or so (see video 1:15 to 1:55). The .223 Remington ammunition featured in this video is loaded with Sierra BlitzKing bullets. Fog offers both rifle and pistol ammo loaded with quality components.
Video Shows Automated Loading Process Start to Finish (Worth Watching):
Remember when primers were plentiful and priced affordably?
Times are tough right now for hand-loaders. It is hard to find reloading components, particularly powder and primers. Thankfully, Brownells has made it easier for folks to find available powders without going through hundreds of searches resulting in “0ut of Stock” results. Just visit Brownell’s IN-STOCK Powder Page to see all reloading propellants currently available. This can save you much time and effort.
Brownells has two dozen major-brand powders IN STOCK today, including excellent, popular propellants from Vihtavuori, Hodgdon, and Winchester. Vihtavuori propellants such as N140 and N550 have a proven track record in competition and are popular with benchrest and F-Class shooter. As of today, 12/16/2020, here are 16 powders IN STOCK and available at Brownells.com. There are at least eight more powders in stock. But act quickly — these may sell out very soon. CLICK HERE for ALL in-stock powders.
Nosler has just released the Nosler Reloading Guide #9, the latest in a respected series of hardback Nosler load manuals. This 800-page guide covers 101 cartridge types. New in this edition you’ll find the popular 6mm Creedmoor, 6mm XC, 6.5 PRC, and 7.62×39, along with 20 Nosler, 22 Nosler, 24 Nosler, 27 Nosler and 33 Nosler. This new guide draws from thousands of hours in the Nosler Ballistic Lab, along with the experience of many respected experts.
The book is available right now for $24.99 at Grafs.com. In addition, much of the book’s latest load data is available for free on the Nosler.com online LOAD DATA Center. But to get ALL the data, PLUS the technical article, you’ll need to buy the book.
The Nosler Reloading Guide 9 Reloading Manual provides load data for 101 rifle and handgun cartridges with hundreds of new powder additions. A comprehensive data set for today’s reloader, this manual is current with every bullet that Nosler offers through 2020 from 17 caliber up to 458 caliber in the rifle section and 9mm up to 45 caliber in the handgun section. Nine new cartridges were added to this manual. These include: 20 Nosler, 22 Nosler, 24 Nosler, 6mm Creedmoor, 6mm XC, 6.5 PRC, 27 Nosler, 7.62×39 and 33 Nosler. Also new for the Nosler Reloading Guide #9 are cartridge introductions written by veteran outdoor writers and industry tech experts. The 800-page book also has helpful “how-to” sections such as “Getting Ready to Reload”.
Q. Why Buy a Book when Load Data is Available Online from Powder Makers?
There are good, solid reasons to buy print-format loading guides produced by bullet-makers. If you go to the Hodgdon online Reloading Data Center you’ll only find loads with Hodgdon, IMR, and Winchester powders — the key brands they sell. In a book such as this Nosler #9 or the Sierra Reloading Manual, you will find loads with a much wider selection of powders including Vihtavuori, Alliant, Accurate, Norma, Ramshot, and other brands. You won’t find a Reloder 16 or VV N140 load on Hodgdon’s website.
In addition, it is handy to have loads in a print edition which is easy to access on your load bench. You don’t need a computer or an internet connection. And using a book is often faster than a web interface when quickly scanning through a variety of bullet choices for a cartridge.
Along with the new Nosler #9 Manual, here are four other recommended Reloading Manuals:
Sinclair International has created a series of helpful articles on rifle cartridge reloading. Today’s feature lists ten basic steps for precision hand-loading, with links to longer, detailed Sinclair Int’l technical articles providing more complete information. There’s a lot of helpful info here guys, if you click all the links to access the ten “long form” articles.
Tying It All Together: 10 Steps To Precision Handloads
Feature based on article by Roy Hill, Brownells/Sinclair Copywriter
Sinclair Int’l offers a series of detailed articles on hand-loading precision rifle ammunition. The articles are included in Sinclair’s GunTech Articles Archive, but sorting through the index to find each article takes time. To help you access all these articles quickly, here’s a handy summary of ten key topics, with links to longer articles covering each subject in detail.
Part 1: The first step in making high-quality handloads is to carefully choose the best brass for your application. You need to know how to identify the different types of brass and how to choose the best kind for the ammo you want to load. CLICK HERE for Part 1.
Part 2: Even high-quality brass can have burrs around the flash hole that can interfere with the primer flame and cause inconsistent ignition – which can lead to shot groups opening up. Flash hole deburring is a critical step in making sure primers ignite powder consistently. CLICK HERE for Part 2.
Part 3: The next step is to make sure the primer pockets are square and uniform. Like flash hole deburring, primer pocket uniforming may reduce variations in primer ignition by ensuring more consistent primer seating. CLICK HERE for Part 3.
Part 4: Making sure all your cases are precisely the same length is crucial, especially when you use cases that have been fired before. Case trimming is the way to get there. CLICK HERE for Part 4.
Part 5: After trimming, cases still have to be resized. In order for them to work through the resizing die, they have to be lubricated. The case lube method you choose is crucial to making precision handloads. CLICK HERE for Part 5.
Part 6: Now it’s time to choose the dies that will resize your cases. There are several important options to consider in selecting the right sizing dies. CLICK HERE for Part 6.
Part 7: Wait! You’re not quite ready to start sizing yet. There’s yet more to consider before you start cranking cases through the press. Learn more about setting up and adjusting your sizing dies. CLICK HERE for Part 7.
Part 8: Once the cases are completely prepped, it’s time to start putting fresh components back into them. We start off by seating primers. CLICK HERE for Part 8.
Part 9: After the primers are seated, it’s time to drop in the powder. There are several tools that will help you handle powder for precision handloads. CLICK HERE for Part 9.
Part 10: The final step in the process is carefully seating the bullet to just the right depth. And then… you’re ready to try your loads at the range. CLICK HERE for Part 10.
There will be no SHOT Show this year. So, to learn about new gun industry products, we must rely on the print media, internet, and a few gun-centric cable TV shows (such as Shooting USA). Thankfully, Shooting Industry magazine remains alive and well. And SI just released its first of three new-for-2021 product features. Part One of the three-part 2021 New Product Showcase is found in Shooting Industry’s just-released December issue. This features new-for-2021 products from 50+ companies. CLICK HERE to see all new featured products.
Here are six standout products from the 2021 New Product Showcase:
Springfield Armory Waypoint Rifles
Springfield’s new Waypoint rifles feature steel or carbon-wrapped barrels, TriggerTech triggers, and carbon-fiber, hand-painted camo stocks with five QD mounts for versatile carry plus M-Lok slots. The actions are impressive too — with precision machining, enlarged ejection port, and integral recoil lug. These Waypoint rifles rival full-custom hunting rigs, yet are reasonably affordable. Starting price is $1699.00 with stainless barrel, while the deluxe model with carbon-wrapped barrel and adjustable cheekpiece is still under $2,400.00. All Model 2020 Waypoint rifles feature strong, light-weight, carbon-fiber-reinforced stocks with hand-painted camouflage finishes. You could easily pay $700-$800 just for an equivalent camo-painted stock from McMillan or Manners Composite Stocks.
New Lapua Brass: .284 Win, 6.5 PRC, .300 PRC, and .300 WinMag
Lapua will offer four new types of ultra-premium cartridge brass in 2021. The four new Lapua cases are: 6.5 PRC, .284 Winchester, .300 Winchester Magnum, and .300 PRC. The .284 Win cartridge still dominates the F-Open game, so this is good news for F-Class shooters. Lapua is excited about the PRC offerings: “The new Lapua 6.5 and .300 PRC cartridge cases provide competitive shooters, hunters, and accuracy enthusiasts a premium selection for precision hand loads, an option that’s been missing from the market since the PRC’s inception.” The venerable .300 Winchester Magnum remains a top choice for hunting.
Daniel Defense Delta 5 Pro Chassis Rifle
PRS/NRL shooters should check out the new DELTA 5 PRO from Daniel Defense. This features a stainless action with 3-lug bolt and hammer-forged barrels. The aluminum chassis stock is fully adjustable and features a thumbrest that works for both left- and right-hand shooters. This Delta 5 Pro comes standard with an Area 419 HELLFIRE muzzlebrake. The rifle is available in .308 (20″ Heavy Palma barrel), 6.5 Creedmoor (24″ Heavy Palma barrel or 26″ varmint barrel) and 6mm Creedmoor (26″ varmint barrel).
J.P. Sauer & Sohn — UltraLight Synchro XTC Hunting Rifle
For 2021, J.P. Sauer enhances the S404 series with the Synchro XTC, a carbon fiber, bolt-action rifle in camouflage green. Weighing 6.1 pounds, this lightweight S404-series rifle features a hand-laid, carbon-fiber, thumbhole stock with adjustable comb. The hammer-forged barrel is fluted for balance and weight reduction. The adjustable trigger offers four pull weights from 1.2 to 2.7 pounds. Adjusting the pull weight is easy using settings marked above the trigger. Like all J.P. Sauer S404-series rifles, the new Synchro XTC allows easy changing of bolt heads and barrels for quick caliber conversions. If you want something even lighter, the S101 Highland XTC carbon-fiber rifle weighs just 5.5 pounds for short action version. This features a hand-laid, carbon-fiber stock with fluted barrel. The manufacturer guarantees sub-MOA accuracy at 100 yards.
Lee Precision Primer Pocket Swager (Large and Small)
Lee’s new Ram Swage primer pocket swager will remove primer pocket crimps on both large- and small-primer brass. This new tool features spring-assisted case extraction. The all-steel case guide ensures cases will be positively centered on the push rod. The Lee Swager works on all single-stage presses with 7/8″-14 threads in the press frame that can accept universal shell holders. The unique design, which does not use a conventional shellholder, allows users to swage any small or large primer pocket without swapping to a different size shellholder.
Rite in the Rain All-Weather MRAD Target
Not that winter is here, there will be some cold, wet days at the range. No worries with Rite in the Rain Target Products with rain-proof cardstock. New for 2021 is an All-Weather 100M Sniper Target. Perfect for PRS shooters with Mil-Rad scopes, this target boasts a 1 cm grid with each box representing 1/10 milliradian at 100 meters. The bullseye and scoring rings represent an MR-1 target presented at 500 meters. Below the target grid are fields for recording load information and Range conditions. The target also has 1, 2, and 3 MOA rings so you quickly judge accuracy at long range.
More Women Become Gun Owners — Important Trend
More women than ever are becoming gun-owners. So far in 2020, women represented over 40% of first-time gun buyers, a notable statistic. To analyze this trends, leaders from The Well Armed Woman, A Girl & A Gun, and Shoot Like A Girl sat down with Shooting Industry Magazine to share their insights. They discussed how 2020’s events compelled new groups of women to not only purchase their first firearm, but to join the broader firearms community. READ Story HERE
Don’t have time to hand-load your own ammo, or don’t have all the equipment and dies needed? There’s a new option — something that’s actually quite revolutionary in the ammo industry. Federal is now offering custom-loaded ammunition. You choose the cartridge type and bullet type and Federal technicians put the ammo together. Think about it — this could be an interesting option for hunters who only need a few rounds a year, or if you want to try out a bullet/cartridge combo for the first time.
“Each round is painstakingly handloaded to order by our team of expert engineers in our state-of-the-art reloading workshop. Veteran craftsmen combine the best components with extra quality checks at every stage for the most consistent velocity, accuracy, and overall performance. Loads are then hand-checked for final inspection and cleaned before being custom-packed in durable, personalized packaging.”
26 Centerfire Rifle Cartridge Types + Many Bullet Options
Currently, you can choose from 26 rifle cartridge types and a wide selection of quality bullets from Barnes, Berger, Sierra, Nosler, Federal, Hornady, Swift, and more. NOTE: Federal Custom Shop ammo will be sold direct-to-consumer only. Along with rifle ammo, Federal will offer custom TSS Shotshells.
Bullet Types Offered: BARNES TIPPED TSX, BERGER HYBRID HUNTER, HORNADY ELD-X, NOSLER ACCUBOND (and Accubond LR), NOSLER PARTITION, SIERRA MATCHKING, SWIFT A-FRAME, WOODLEIGH HYDRO SOLID; and Federal TERMINAL ASCENT, TROPHY BOND BEAR CLAW, TROPHY BONDED SLEDGEHAMMER, TROPHY COPPER.
Please note: Federal Custom Shop ammunition is built to order — not pulled out of inventory in a warehouse. As such, please allow more time for processing and delivery. Typically, your Custom Shop order will take two weeks to build, plus standard delivery time. The Custom Shop handloading center is located at Federal’s main factory in Anoka, Minnesota. For more information, including how to order, what specific load options are available, and shipping details, visit: FederalPremium.com/custom-shop.html.
“If it’s not in Federal’s vast catalog as factory-loaded ammo, we may have it listed on our website as a load we will custom hand-load for you,” notes Federal Ammunition President Jason Vanderbrink. “For example, Barnes 120-grain Tipped TSX in 6.5-284 Norma and 28-gauge TSS turkey loads aren’t products we list in our catalog, but you can certainly order them through our Custom Shop.”
Hoarding of Primers
As an individual, as of right now, there’s little you can do in the face of the reloading equipment supplies shortage. Keep checking your trusted online distributor Powder Valley for new arrivals of primers from all four manufacturers.
