Are you looking for a stable bipod that attaches quickly and easily to the sling stud on your hunting or varmint rifle? Magpul has a new bipod that fits standard hunting-style, radiused fore-ends well. This new Magpul Sling Stud QD Bipod clamps to a sling stud in seconds. Watch the video to see how it works.
Priced around $110.00 on Amazon, this new Magpul is more expensive than a Harris-type bipod, but it has some advantages. There are no exposed springs to grab your hand. The vertical leg adjustment is quick and easy. There is a large knob in the center that allows you to traverse (pan) left to right, while keeping the feet in position. In addition, by loosening the knob you can tilt the rifle up to 25° from vertical either side (i.e. rotate the rifle around the bore axis). For this kind of rotational adjustment, a Harris swivel with a Pod-Loc is faster and easier, but the Magpul isn’t bad.
The legs consist of anodized 6061 T-6 aluminum shafts inside injection-molded, reinforced polymer columns. The legs stow neatly forward and lock into place with one hand. You can adjust leg height from 6.6″ to 10.0″ using push-button locking detents. Should users choose to change feet, the Magpul bipod’s legs accept most Atlas-pattern bipod replaceable feet.
Magpul Sling Stud QD Bipod Features:
• Rapid, self-locating mounting system attaches to Sling Studs on narrow or wide fore-ends.
• Up to 25 degrees of tilt either way around the bore axis of weapon (50 degrees total).
• Uncle Mike’s-style sling stud on rear of mounting body.
• Efficient individual leg height adjustability in 0.5″ increments for a total of seven positions.
• Adjustable friction knob for setting tilt and ease of movement.
• Removable rubberized feet compatible with Atlas pattern replaceable feet.
Looking for a nice .22 LR rimfire training rifle that works well with rear bags and bipods? Then check out the new B-14 R from Bergara. It is set up for rimfire training and tactical-style competitions. The action and magazine are full centerfire dimensions, so that you can train with a rimfire rifle offering centerfire-style “feel” and ergonomics. MSRP is $1150.00 so expect street price to be around $1000.00.
We think this would be a good choice for the NRL22 tactical competition for shooters preferring a conventional-style stock. It has an adjustable cheekpiece and LOP adjusts with spacers. The toe of the buttstock is straight so this will work well with bags. And if you want to later swap to a metal or composite chassis, the B-14 R barreled action will fit stocks and chassis systems designed for Rem 700s. In fact you can even use aftermarket Rem 700-compatible triggers.
B-14R Bolt Action .22 LR
The Bergara B-14 R Bolt Action Rifle in .22 LR is the latest offering in Bergara’s popular B-14 series of rifles. The company states: “The Bergara B-14 R has been a product that our customers and enthusiast have been requesting for quite some time, and with the growing NRL22 and PRS .22 competition matches, we believed that the time was right to introduce a rifle of this nature.”
This rifle is designed as a true rimfire trainer with the feel of a Rem 700 centerfire rig. The action shares dimensions of a Rem 700 receiver so you can upgrade to Rem 700-compatible stocks, and triggers. The single-stack .22 LR magazine has the same external dimensions as the commonly-used short action AICS mag for centerfires. So even your mag swaps will duplicate the “feel” of your centerfire rifle.
Bergara B-14 R Specifications
Barrel: 1:16″-twist 4140 Bergara, 18″ free-floated
Muzzle Thread: 1/2-28
Rifle Weight: 9.25 lbs. (without optics)
Rifle Length: 38″ with all spacers
Magazine Capacity: 10 rounds
Scope Mounts: 6-48 screws, Rem 700 compatible
Stock: Bergara HMR stock molded with full-length integrated mini-chassisinternal mini-chassis, integrated OD flush cup sling mounts and swivel mounts, adjustable cheek piece and length-of-pull.
Today is October 31st, Halloween (originally “All Hallows Eve”). That means it’s pumpkin time. Just how much fun can you have with pumpkins? Watch these two videos and find out. In the first video, the RatedRR team sends a few orange gourds to pumpkin heaven using Det Cord, C4, and binary explosives. The sequence starting at the 2:00 minute mark in the first video is truly amazing. WARNING: DO NOT TRY THIS AT HOME!
Watch Pumpkin Blasting with Explosives
In the next video, a pumpkin carved as a Death Star serves as the target for a .50 caliber rifle (looks like a Barrett M82 .50 BMG). As you may guess, the pumpkin Death Star suffers the same fate as the Hollywood version in Star Wars. NOTE: At the 0:42 mark in the video, a graphic displays “30,000 FPS”. That’s the high-speed camera’s frame-per-second rate, NOT the projectile velocity in feet-per-second.
Watch .50 BMG Rifle vs. Death Star Pumpkin
Warning: These demonstrations were carried out on closed ranges by experienced professionals certified to use explosives. Possession of C4 and Det Cord may be a violation of various Federal, State, and local laws. Detonating cord and C4 are classified as high explosives and are regulated by the BATFE. Don’t even think about trying to repeat these stunts on your own.
Ever wondered how the parts inside an AR15 work together? Just exactly how does the reciprocating bolt carrier feed rounds from the magazine? How do the elements in the trigger group work and reset after each shot? How does the gas system bleed gas from the barrel and operate the bolt carrier? These and other questions are answered in this eye-opening video from 45Snipers. Using “cutaway” 3D computer animation, this 5-minute video shows all features of an AR15 inside and out. This fascinating firearms animation allows the viewer to look inside the upper and lower receivers, into the bolt carrier, chamber, barrel, and magazine.
This video starts off slow and has annoying background music, but it is well worth watching if you own or shoot any AR-platform rifle. It illustrates all the key operations during the charging, loading, firing, and ejection processes. The cutaway animation shows how rounds are stripped from the magazine and then chambered. It then shows how every part of the trigger group works, and how the firing pin strikes the primer. You can even watch the bullet move down the barrel before the empty shell casing is removed from the chamber and tossed out the ejection port. Here are sample frames from the video:
Video find by Grant Ubl. We welcome reader submissions.
We love the NRL22 rimfire tactical series. When you consider the amount of fun you experience per dollar expended, NRL22 .22LR rimfire competition is hard to beat. You enjoy the challenge of PRS-type shooting at reduced distances, and much reduced cost. In the NRL22 series you can be completely competitive with .22 LR ammo costing 15 cents a round. That’s a fraction of what you’d spend making your own centerfire handloads, or buying match-grade, factory-loaded centerfire ammo.
There’s a new option for NRL22 competitors competing in the Open Class. Modular Driven Technologies (MDT) now offers its ACC Chassis for the popular CZ 457 series of rimfire rifles. There are nine different CZ 457 variants currently offered. You can get the CZ 457 Training Rifle for around $400 (MSRP is $449.00). Simply install your CZ 457 barreled action in the MDT ACC chassis and you’re got a high-quality rimfire system with ergonomics that duplicate a full-size centerfire ring. NOTE: MDT also offers an ACC chassis that fits the CZ 455 series, predecessor to the CZ 457. The ACC CZ 457/455 chassis systems cost $999.00 — too expensive we think, but then quality ain’t cheap. Purchase from MDTTAC.com.
MDT ACC Chassis System (Shown with Centerfire Actions)
The MDT ACC (Adjustable Core Competition) Chassis was designed around an integrated, modular weight system that allows shooters to fine tune chassis weight and balance point. A series of weights (up to 9 lbs. of steel) can be added to either the buttstock, interior fore-end or exterior fore-end. With action, barrel, scope and accessories, shooters can configure their rifles upwards of 25-30 lbs. in the ACC. Other features include: full 17” ARCA/RRS fore-end, flared mag well, extended barricade stop, widened thumb shelf, and adjustable cheek riser/length of pull.
The mainstream media (CNN, MSNBC, CBS, ABC, the N.Y. Times, etc.) loudly report that the USA is experiencing a tidal wave of gun-related killing and violence. From the barrage of anti-gun stories in the news media, you’d think that deaths caused by firearms (especially those fearsome “Assault Rifles”) are increasing dramatically.
In fact, the truth is just the opposite — overall violent crime is declining, and firearm-related gun violence has DECREASED significantly. We are NOT seeing more murders-by-gun than ever before. In fact, “Homicides with firearms were down 7% from 2017″. Read on to get some REAL facts…
VIOLENT CRIME CONTINUES TO TREND DOWNWARD
Report by Elizabeth McGuigan for NSSF.org
The FBI has released its crime data for 2018 and the news is good. Violent crime dropped 3.3% in 2018 compared to 2017. According to the report, a decrease was seen across nearly every type of violent crime.
Looking at a 10-year trend, the numbers of violent crimes were down a full 9% from 2009 through 2018. The rate shows a more dramatic drop: “There were an estimated 368.9 violent crimes per 100,000 inhabitants in 2018, a rate that fell 3.9 percent when compared with the 2017 estimated violent crime rate and dropped 14.6 percent from the 2009 estimate.” (Source: FBI Report)
Homicides with firearms were down 7% from 2017. And in stark contrast to the theatrics of last week’s House Judiciary Committee hearing on banning modern sporting rifles, rifles were again only used in 2% of homicides, far less than the share committed with knives (11%) or hands and feet (5%).
Modern Sporting Rifle Ownership is UP… And Violent Crime is Down
This chart says it all. Through 2016, there have been over 16 million modern sporting rifles in the hands of law-abiding citizens. Meanwhile, violent crime is declining. The message is clear. Tragic criminal actions must be addressed. Banning certain types of firearms is not the answer.
Real Solutions from the NSSF
The firearms and ammunition industry shares the goal of finding the root causes of criminal violence and has created programs over the years to help address safety practices and problems of unauthorized access. The firearms and ammunition industry prides itself on high rates of compliance and on our voluntary programs, often in partnership with local, state and federal government agencies, to help curtail the actual problems of guns illegally getting into the wrong hands.
We work to make sure states are submitting all prohibiting records to NICS. We provide millions of free gun locks and educational materials in all states. We train our members to spot straw purchasers, to comply with all laws, and to use discretion when making transactions and keeping their inventory secure.
ARs in PRS? Yes PRS has a “Gas Gun” division. And frankly, shooting a PRS match is one of the most fun and challenging things you can do with your Black Rifle (Beto O’Rourke notwithstanding). Since the early days of the PRS, Gas Gun shooters have wanted to play. Recognizing the interest among semi-auto shooters, the PRS now offers a Gas Gun Series for semi-auto rifles such as AR15s and AR10s. The Gas Gun Series started in 2017, and has quickly become quite popular.
Photo Credit Michael Cage.
Gas Guns to 800 yards — Yes there are targets down there somewhere.
PRS Gas Gun Series Rules
For the new PRS “Gasser” Competition, the PRS developed rules on gun types, scoring, match timing, penalties, safety and other key topics. CLICK HERE for Full PRS Gas Gun Series Rules.
Open Division: Open Division rifles will not exceed a caliber of .30 or a velocity of 3,200fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies). Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ. [“For Ammo in Open Class, 6mm and 6.5mm Creedmoor are popular.” — John Parker, SSUSA]
Tactical Division: Tactical Division: Intended to allow competitors the opportunity tocompete using traditional military and law enforcement caliber. This promotesActive Duty military and law enforcement competitors use of their Service and Department issued rifles. Tactical Light Division rifles are restricted to 5.56 NATO/.223 Remington and 7.62 NATO/.308 Winchester calibers only. .223 Bullet weight cannot exceed 77 grains and muzzle velocity cannot exceed 3,000 fps, .308 bullet weight cannot exceed 178 grains and muzzle velocity cannot exceed 2,800 fps. No modified wildcat rounds permitted to shoot in the Tactical Divisions. Tactical Division shooters will shoot the exact same COF as Open Division shooters. [NOTE: This division now replaces the previous Tactical Light and Tactical Heavy divisions.]
Scoring and Penalties
The Gas Gun Series utilizes a time plus penalty based scoring system for all match scoring. This means your score is your total combined time on all stages plus any penalties you may have accrued.
Stage Course of Fire and Targets
No more than 50% of the stages at a match can utilize an unlimited round count. At least 25% of the targets in Gas Gun Series match must be 2 MOA or smaller. Maximum distance is 800 yards.
The preferred rifle color choice at the first PRS “Gasser” Match was definitely black…
Gas Gun Match Loads — Short Range vs. Long Range
“The .223/5.56 [Tactical Light] guns had some lag time waiting on shot impacts. I believe the long-term solution may be to find a light and fast load for closer stages for near-instant reaction time and use a heavy load for the long shots to see splash and get the target to move a little more.” — Sean Murphy, Nightforce
Gear Options for PRS Gas Guns
There are many buttstock options for ARs. For the PRS game, we like the Magpul PRS stock. This features a quick-adjustable cheek-piece and butt-plate — allowing you to easily adapt head position and LOP for your discipline of the day. (You may want a different LOP for prone shooting vs. bench shooting). The Magpul stock works well in a rear bag.
We recommend something like the Blackhawk grip which is more comfortable than the typical grips supplied by most black rifle makers. Up front, you’ll want a handguard with adaptability. Shown is a handguard with Picatinny rails on top and on both sides, affording lots of options. We might move one of the rails to the bottom, however, so it could be used for a bipod mount.
Add Your Favorite Premium Barrel:
PRS with a Gas Gun — Gavin Gear’s Experience
Thinking of trying out the Precision Rifle Series, starting off with a gas gun? Well Gavin Gear of UltimateReloader.com did just that, competing in his first-ever PRS match up in Washington State. With its timed stages (some just 90 seconds long), Gavin learned that PRS is about speed as well as accuracy. As a PRS newbie, Gavin found the competition fun but challenging. Gavin’s account of his experiences, set forth in two articles with accompanying videos, will help other novice PRS competitors prepare for PRS-type matches and assemble the right equipment.
This video has cool Aerial Drone footage, and in-depth explanation of stages:
Gavin enjoyed his first match: “Overall, the match was more fun and more laid back than I thought it would be. The guys in our squad were all really helpful, and even loaned me gear to try out when they noticed my gear wasn’t right for a particular shooting activity. One such case was when Ken Gustafson (of KYL Gear) offered to loan me one of the bags he had made. Below you can see me shooting off the infamous unstable tippy tank trap with a KYL Gear bag, and I’ll have to say [the bag] was amazing. It helped me lock down my rifle and get on target. What a great feeling!”
Forum member Kevin (aka “N10Sivern”), revealed he needs some help with a compulsion — a compulsion to keep buying more and more guns and ammo. Particularly ARs, all shapes and sizes of ARs. Way too many ARs. You could say he has an ARdiction….
In a Forum Thread, Kevin posted: “I may need an intervention. Trying to clean my office and pulled this stuff out. I’m missing an AR10 lower somewhere and an AR15 upper. I’ll find them before the day is done. I have a big box full of parts as well, and 4 barrels still in the cardboard tubes. Sigh. This is gonna be a lot of Cerakoting for me.”
Another Forum member said: “For the love of God, man. Delete this thread lest you be accused of hoarding!”
Kevin replied: “I guess I am hoarding a little. But it’s good hoarding right?”
And then he posted this “Mail Call” photo:
Kevin’s caption: “It only gets worse. Mail Call today: 20″ .308 Ballistics Advantage barrel, 26″ Savage 25-06 barrel, 700 pieces of .38 special, 300 pieces of .357 magnum, 500 pieces .308 Win, gas tube, Hornady Modified Case Gauge. I have more crap on the way too.”
Forum Member’s Chime In…
Kevin’s “Need Intervention” post drew plenty of comments from other Forum Members:
“God! It is so refreshing to see that my illness is widespread with little hope (or desire) for a cure. I smiled reading each post.” — Gary0529
“You know you have a problem when you open a drawer and find components you forgot you bought.” — JoshB
“It’s not hoarding if you intend to use it. Says he who has 12,000 primers.” — Uthink
“I guess I’ll go ahead and volunteer to help you with your obviously much needed intervention… send me the pictured items and then you’ll no longer have to deal with those nasty temptations. Just think about it, you’ll have less clutter in your office plus you’ll not have to fret over the need for any cerakoting either. I’m just one human being volunteering to help out another fellow human being who needs help!” — PikesPG
How fast can you shoot a bolt-action rifle? We doubt you can out-pace the ace “Stangskyting” shooters from Scandinavia. Some of these guys can run more than two rounds per second, including mag changes! That’s impressive. Bulletin reader C. Lemmermann from Denmark told us: “In Scandinavia we have this competition called ‘Stangskyting’. It’s similar to the ‘Mad Minute’ but we only have 25 seconds to hit the target [at] 200-300m distance with a 6.5×55 [target rifle].” In the Stangskyting video below a shooter named Børklop puts 16 rounds on target in just 25 seconds. (He starts with a round in the chamber and cycles through three, 5-round magazines).
Børklop’s performance, with just a sling and iron sights, is impressive. He’s shooting a Sauer 200 STR target rifle with 5-round magazine. Note that Børklop manipulates the Sauer’s bolt with his thumb and index finger, while pulling the trigger with his middle finger. As good as Børklop is, some Stangskyting competitors are even better. Roy Arne Syversrud from Oslo, Norway tells us: “The best shooters in Norway can do 21 shots in 25 seconds, changing the mag three times.”
Here’s another Stangskyting video. Check out the speed with which John Olav Ågotnes works that action — simply amazing!
This Guy Could Break the “Mad Minute” Record
Børklop’s rate of fire, 16 rounds in 25 seconds, is the equivalent of 38.4 rounds in 60 seconds. That’s a notable number because the record for the “Mad Minute”, a British Army marksmanship drill, is 38 rounds in one minute. That record was set in 1914 by Sergeant Instructor Alfred Snoxall, and still stands. So as you watch Børklop, keep in mind that Snoxall shot that fast for a full minute with a Lee-Enfield nearly 100 years ago!
Børklop has an average cycling time of 1.56 seconds per shot, starting with a round in the chamber. To beat the record of 38 rounds, he would need to make seven mag changes in sixty seconds. All those mag swaps could reduce his average time per shot, making it difficult to achieve 38 hits in a minute. But, if Børklop could use 10-round mags with his Sauer STR, this guy has the skills to break the record.
To emphasize the capabilities of the WWI-era British shooter who set the record, Snoxall shot as fast as Børklop does, but Snoxall reloaded with stripper clips. Snoxall’s SMLE (Lee-Enfield) rifle also had relatively crude open sights and the stock was far less ergonomic than Børklop’s Sauer STR stock.
Here’s another Stangskyting video showing John Ågotnes shooting rapidfire with his Sauer 200 STR (Scandinavian Target Rifle) chambered in 6.5×55. By our count, Ågotnes manages 17 shots within the 25-second time period. That rate of fire (17 in 25 seconds) equates to 40.8 rounds in one minute!
MasterPiece Arms (MPA) has a new chassis system — the “MPA Matrix”. Derived from the MPA BA Chassis, the MPA Matrix Chassis offers a “multitude of configurations in grips, thumb rests, and trigger finger supports”. MPA claims the grip and hand area has over 100 different variations. The MPA Matrix has a fore-end two inches longer than the standard BA or BA Competition Chassis. Overall, the Matrix is fairly heavy, at 6.4 pounds, and pretty expensive, with a $1250-$1450 MSRP (depending on options). By contrast the MPA BA Hybrid Chassis costs $925.00 and weighs 3.5 pounds (without recoil pad).
CLICK Image for large MPA Matrix Photo:
There are significant design differences between the MPA Matrix and MPA BA Hybrid (below). The Matrix, at 6.4 pounds, is also much heavier than the 3.5-lb BA Hybrid. Given that many PRS/NRL competitors favor heavier rifles for greater stability (and less felt recoil), the Matrix’s extra mass is probably a good thing.
The MPA Matrix features five different grip options (3 swept and 2 vertical), three different thumb-rest designs and four different trigger finger supports. That’s great for shooters who like to keep their thumb forward on the bolt side of the action. However, looking at the chassis, we’re really not sure we like the way the Matrix encircles the grip area. You’ve got hard metal behind the grip. The Matrix appears set up for resting the thumb of the trigger hand alongside the action. That can work for sure, but we think some shooters will prefer a more conventional vertical grip you can wrap your thumb around. A conventional grip will also have recoil cushioning for the web of the hand. See the BA Hybrid chassis for comparison. This Matrix is really VERY different in the grip area. But if you don’t like the Matrix, there are certainly other stock options available.
The new Matrix Chassis is designed for Remington Short Actions and Rem clones. The Matrix does offer good adjustability — the buttstock has an adjustable cheek riser and length of pull adjusts from 13.5 to 14.75 inches. Plus, the recoil pad adjusts for height and cant. You can get either an adjustable rear monopod or a bag-rider configuration. As you’d expect, the MPA Matrix has M-LOK slots along the fore-end sides and barricade stop holes along the bottom.
What was the concept behind the Matrix chassis? MPA’s President, Phil Cashin, states: “One of the things that we have seen in precision rifle shooting over the past couple of years is how many different methods a shooter used to engage a stock or chassis. Due to variations in hand size, finger thickness and length, as well as shooter preference on how they want to engage the chassis or stock, we’ve seen a lot of inconsistencies among the shooters in how they engage the rifle and where they position the pad of the trigger finger with the shoe of the trigger. This inspired us to create a system that would provide a more custom fit procedure for our customers by creating a chassis with more customized configurations.”
The MPA Matrix Chassis (MSRP $1250-$1450) is available in eight Cerakote colors: Graphite Black, Flat Dark Earth, Burnt Bronze, Tungsten, Gunmetal, Sniper Green, NRA Blue, and USMC Red. Custom H Series Cerakote colors are an additional $135, while camo patterns are $450 extra.
