BREAKING NEWS 4/4/2019: The decision holding California’s ban on full-capacity magazines to be unconstitutional still stands. However Federal Judge Benitez has issued a stay on sales of full-capacity magazines in California, pending appeal. This STAY ORDER goes into effect April 5, 2019 at 5:00 pm. This will temporarily halt sales of magazines with 10+ round capacity, while his decision is under appeal. Those who ordered these magazines over the past few days will be able to take possession, but the doors are shut again for the time being.TEXT of STAY ORDER.
Full-capacity magazines are legal again in California. This is big news for the Golden State, where sales of magazines holding more than 10 rounds have been banned for nearly two decades. Why the change — why can Californians buy 20- and 30-rounders again? The answer is that the California mag ban was ruled unconstitutional by a Federal Judge on March 29, 2019.
In the Duncan v. Becerra case, Federal District Court Judge Roger Benitez ruled that the California laws banning full-capacity magazines were invalid under the Second Amendment of the U.S. Constitution. Judge Benitez wrote “Individual liberty and freedom are not outmoded concepts,” and declared unconstitutional California’s restrictions on magazines holding more than 10 rounds. READ Full Opinion HERE.
As background, California has prohibited sales of full-capacity magazines since 2000. But citizens who owned mags with 10+ capacity were allowed to keep them — until recently. A new law required magazine owners to destroy or surrender their magazines. This prompted a new NRA lawsuit which resulted in the ruling by Federal Judge Benitez.
California’s State Attorney General will appeal Judge Benitez’s decision to the 9th Circuit Court of Appeals, known for its left-leaning bias. But in the meantime, the doors are open. Full-capacity magazines are now legal to purchase and own in California.
According to ABC News in Fresno, CA: “Ammunition stores are eagerly welcoming back California customers after the state’s nearly twenty-year ban on high-capacity magazines. The ruling has prompted a massive shipment of high-capacity magazines to California.” And yes, Californians can now buy full-capacity mags from online vendors. This notice recently appeared on Brownells.com:
On the 6.5 Creedmoor Facebook page we found an eye-catching Savage Model 10 BA Stealth. Rifle owner Derek P. has done some important upgrades, starting with a wicked, spiral-fluted McGowen barrel with red-painted flutes. The red theme was carried over to the chassis which combines fire-engine red with matte black in the middle. The scope rings and even the magazine were painted red to match as well. The whole effect is very striking, as you can see.
The barrel is a 29-inch 1:8″-twist McGowen. The optic is a 4.5-27x56mm Vortex Razor HD GenII with sunshade. That supper-stable rear sandbag is a Protektor DR Bag, one of our favorites. The front sandbag is also a Protektor. The front Rest is the new Protektor Aluminum Rest with Mariners Wheel. Look carefully and you’ll see a flat 2.5″-wide block on the underside of the forearm. That improves stability and tracking.
What we really like is the upgraded rear buttstock section. This is NOT standard by any means. Rifle owner Derek has fitted an aftermarket XLR Tactical Lite Buttstock that sits properly in that Protektor DR rear bag. This unit combines an adjustable buttpad with a nice cheek-rest (with upgraded pad from Tactical Works). And, very importantly, the XLR can be fitted with a “tactical bag rider” or you can easily make your own bag rider.
As the Savage 10 BA Stealth Comes from the Factory
This video shows a box-stock Savage 10BA Stealth. Note how different the stock buttstock/cheekpiece assembly is compared to Derek’s Red Hot Savage.
Do you need a quality, affordable lower for your next black gun build? Here’s one of the best deals we’d found. Palmetto State Armory (PSA) now has stripped AR15 lowers for just $49.99. With this lower as the core, you can build up your AR for any discipline you choose: 3-Gun rifle, competition service rifle, varmint rifle, or even “race gun” for the popular PRS Gas Gun Series (see below).
These forged PSA lowers are quality-made using 7075-T6 Aluminum. Finish is Black Hardcoat Anodized per MIL-8625 Type 3 class 2.
PRS Gas Gun Series — What You Need to Know
PRS Gas Gun Series Basics — How to Get Involved
Capitalizing on the success of the bolt-gun competitions, the PRS runs a Gas Gun series for semi-auto rifles such as AR15s and AR10s. The inaugural 2017 PRS Gas Gun Series competition took place February 17-19, 2017 at the CORE Shooting Solutions range in Baker, Florida. Now there are PRS Gas Gun Matches around the country.
PRS Gas Gun Series Rules
For the new PRS “Gasser” Competition, the PRS developed rules on gun types, scoring, match timing, penalties, safety and other key topics. CLICK HERE for Full PRS Gas Gun Series Rules.
Open Division: The Open Division rifles will not exceed a caliber of .30 or a velocity of 3,200 fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies). Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ.
Tactical Light Division: Intended to allow competitors the opportunity tocompete using traditional military and law enforcement caliber. This promotes Active Duty military and law enforcement competitors use of their Service and Department-issued rifles. Tactical Light Division rifles are restricted to 5.56 NATO/.223 Remington calibers only. Bullet weight cannot exceed 77 grains and muzzle velocity cannot exceed 3,000 fps.
SSUSA: What will be the format of the PRS Gas Gun Series matches?
Wiseman: The matches will be a two-day format with 8 to 10 stages per day. There are three Divisions: Tactical Light for 5.56x45mm NATO/.223 Rem. rifles; Tactical Heavy for 7.62x51mm NATO/.308 Win.; and Open for everything else up to .30 cal. The maximum distance will be 800 yards.
SSUSA: What guns do you expect to be popular?
Wiseman: In the Open Division, I expect to see a lot of 6.5 Creedmoors for two main reasons; it’s an inherently accurate cartridge and Hornady makes great ammo for the folks that aren’t into reloading. I think the Tactical Light Division will probably be the most popular. It is hard to say specifically what rifles will be the most popular but there are a few AR companies that are known for the accuracy. Armalite, GA Precision, LaRue and Seekins will all be very popular rifles in this Series. I think we will continue to see high-end optics with 5X to 6X zoom range on the rifles. Bushnell, Kahles, Leupold, Nightforce and Vortex will continue to be the most popular.
A while back, Machinist/gunsmith Paul Fakenbridge (aka “Boltfluter” on our Shooters’ Forum) upgraded his favorite 22BR varmint rig with a new skeletal stock. This rifle, Paul’s “Rock Chuck Killing Machine”, was originally fitted with an HS Precision fiberglass stock. Now Paul’s 22 BR sports new hardware — a sleek Eberlestock M2 Cobra Chassis in “Dry Earth” color. The $995.00 M2 Cobra is a one-piece metal stock system that mounts a Rem-700 type action in a V-block. The cheekpad height and LOP are adjustable via spacers. The M2 Cobra uses AICS-type mags and can fit Picatinny rails on the side. Weight of the Cobra chassis alone is 4 pounds. READ SPECS.
Check out the “Before” and “After” photos below…
Boltfluter Likes His Eberlestock M2 Cobra
Paul tells us the stock upgrade was a success: “I got the urge to try something different as far as stocks go. I went from the HS stock to an Eberlestock M2 Cobra. The vertical grip feels quite good and is very easy to shoot. And with this upgrade I finally got the chance to flute and coat my own bolt!”
Paul, who runs Pro Precision Rifles, specializes in bolt fluting and barrel fluting (and he also does bolt knobs, coatings, and other gunsmithing work).
Set aside some TV time tonight folks. There is a great episode of Shooting USA on the Outdoor Channel. Over the course of tonight’s hour-long broadcast there are FOUR notable features well worth watching. Show times are 8:00 pm Eastern and Pacific; 9:00 pm Central.
1. AR-Platform 6.5 Creedmoor Precision Rifle. In this segment John Scoutten works with JP Enterprises on a 6.5 Creedmoor semi-auto precision rig using JP’s LRP-07 components. This sequence showcases the AR10-type platform’s abilities with mid-sized cartridges.
2. Fort Benning Multi-Gun Challenge. This is one of the best 3-Gun events of the year. If you like fast action, with rifles, pistols, and shotguns, you’ll love this Shooting USA sequence. The U.S. Army Marksmanship Unit at Fort Benning, Georgia hosts one of the toughest and most challenging multi-gun matches. Watch top competitors move through difficult stages that test strength and agility as well as marksmanship.
Multi-gun competition tests shooters’ skills with rifle, pistol, and shotgun, running stages “on the clock”. You must be fast AND accurate to successfully complete a course of fire.
3. Classic Arms — The U.S. Army’s Model of 1917 Rifle. The Model 1903 Springfield is perhaps more famous, but more Model 1917 rifles were actually issued to American troops in World War I. This sequence covers the history of this important American battle rifle.
4. Rimfire Challenge World Championship (RCWC). This is a great family event. The Rimfire Challenge is a timed, short-range event for .22 LR handguns and rifles. In recent years, the RCWC has been held in Alabama with 16 stages, 8 for rifle and 8 for pistol. This major match attracts hundreds of competitors from around the nation. It’s fast and fun with instant feedback from ringing steel plates. The RCWC is family-friendly event that’s great for all skill/experience levels.
In this Gear Update the 6.5 Guys take a look at the Vudoo Gun Works V-22 rimfire repeater rifle. The action has the same footprint as a Remington 700 so it is compatible with a wide variety of Rem 700 chassis, triggers, and rifle accessories. This allows you to have a rimfire trainer with near-identical ergonomics as your centerfire match rifle. Rimfire training provides valuable trigger time with dramatically lower ammo costs. Additional magazines for this rifle system are available from Vudoo Gun Works for $39.95. Vudoo also sells many other products and accessories through its website: VudooGunworks.com.
Why Train with a .22 LR Rimfire Rig?
Frequent practice, particularly live fire sessions with your match rifle, is the standard prescription for success in the PRS/NRL game. However the cost of shooting thousands of rounds of ammo and the inevitable wear on precision rifle barrels can become cost-prohibitive. Rimfire training allows needed trigger-time while conserving precious centerfire barrel life. Rimfire cost per round might be 12 cents compared to 80 cents (or more) for centerfire.
The Vudoo Gun Works V-22 rimfire repeater action, arguably one of the best tactical rimfire actions available, owes its lineage to the respected Remington 40X action. Many rimfire matches have been won with 40X actions, so we understand why Vudoo chose that design for a starting point. Vudoo then added some important enhancements.
Seen at the WSC: Vudoo Gunworks Tactical .22 LR Rimfire Rifles
The 2017 NRA World Shooting Championship (WSC) included a side-match featuring Vudoo Gunworks .22 LR rimfire tactical rigs. Shooters were impressed with the V-22 rifle, which looks and feels like a centerfire rig, but with a rimfire repeater action running full-size mags.
Vudoo states: “Our V-22 also runs a full-size short action bottom metal (DBM) and our V-2210 magazine has a [full-size] AICS form factor. The V-22 is the only controlled-round-feed .22 LR receiver out there. The bolt has full capture control of the cartridge from the time it leaves the magazine until it ejects the spent round out the ejection port.” That means the round never touches anything during feed travel so the bullets won’t be nicked/dented during rapid cycling.
This very thorough video explains how to clean a .22 LR Vudoo Rifle:
Barrett Firearms Manufacturing(Barrett) has been awarded the U.S. Special Operations Command (USSOCOM) ASR (Advanced Sniper Rifle) contract for with its MRAD (Multi-Role Adaptive Design) rifle system. The SOCOM ASR contract is worth nearly fifty million dollars. The ASR contract was announced by the U.S. Dept. of Defense on March 11, 2019.
Guns.com reports: “The $49.9 million five-year, indefinite-quantity, firm-fixed-price contract announcement is slim on details other than that is for the ASR program. The program itself was identified in SOCOM’s FY19 budget justification book as part of an effort to continue ‘development of enhanced capabilities to improve performance’ of ‘individual sniper weapons to engage out to 1500 meters’.” A key requirement was the ability to shooter multiple calibers and cartridge types.
USSOCOM announced in 2016 it needed a modular, multi-caliber bolt action sniper rifle capable of converting between 7.62x51mm, .300 Norma Magnum (NM) and .338 Norma Magnum (NM). The gun needed to be able to change barrels easily in the field with minimal tools. The Barrett MRAD is designed with precision and modularity in mind. As produced for SOCOM, the MRAD will be designated the Mk21. The new MK21 MRADs will be built at Barrett’s Christiana, Tennessee factory, with production to be completed by March 2024.
Interestingly, this is the first time in U.S. history that both a father and son have designed an official military-commissioned rifle system. Father Ronnie Barrett developed the successful .50-Caliber M107 and now son Chris Barrett has succeeded with the Mk21 MRAD.
“This feels like the highest honor I could ever achieve professionally — to have a rifle adopted by the U.S. military, and especially USSOCOM,” said Chris Barrett. Father Ronnie Barrett added: “I remember Chris telling me that ‘this is what all precision rifles will look like one day!’ and he was right. However, aesthetics is not all that makes this rifle. As his development persisted, he was able to achieve more than I ever thought possible. I genuinely believe this is the most accurate [multi-caliber sniper] rifle in the world.”
The IWA Outdoor Classics trade show is the biggest gun/hunting/outdoor trade show outside the USA. This year 1622 companies are displaying their products and IWA attendance should approach 50,000. The IWA event, held each spring in Nuremberg, Germany, opened yesterday in the Nürnberg Exhibition Centre. The show runs four days, March 8-11, 2019. Here is our IWA Day 2 report, with more images from the show. Photo Credit for IWA images: NuernbergMesse / Frank Boxler and Thomas Geiger, All Rights Reserved.
High-tech Steiner M7Xi IFS 4-28x56mm optic. That box on the end includes a digital display with level and windage/elevation read-outs.
Spectacular one-of-a-kind Walther Q5 pistol with full engraving and custom grips. Wow.
More Walthers — These are Olympic-grade competition Air Pistols.
What’s an outdoor show without a Land Rover and safari gear?
How do you make a beautiful gunstock? Start with a beautiful wood blank. Some stunning Turkish walnut blanks were on display at the IWA Show.
Beautiful Sauer rifle with engraved receiver and presentation grade wood.
There were plenty of handsome wheelguns on display at the Smith & Wesson booth. Accurate revolvers will never go out of style.
We liked this slide-out, mobile gun-locker for rifles and gear. Now that’s some serious storage!
Leading American shooting supplies vendor Brownells has a HUGE presence at IWA.
IWA New Products Center
Along with the main displays for 1600+ exhibitors, the IWA Show features a dedicated New Products Center. Here you’ll find a wide spectrum of new items — airguns, electronics, optics, hunting clothing, knives, cleaning products and more…
We have no idea what this woman is doing with that gadget, but it has something to do with Swarovski Optik. Maybe some kind of virtual reality? What’s your guess?
We know that quite a few hunters and tactical shooters read the Daily Bulletin. Here’s a product for you guys that need a multi-purpose padded support that can be easily carried and adapted to a variety of positions (such as on platforms, vehicle hoods, as well as flat ground). This versatile bag can be used on the front (supporting the fore-end), or in the rear (supporting the buttstock). Made in the USA, “The Brick” Grippy Bag costs $39.95 from Armageddon Gear. Measuring 6″ x 3″ x 3″, “The Brick” is offered in two colors: Coyote Tan and Black.
Made by Armageddon Gear, and sold through the Armageddon Gear Store, “The Brick” has unique features that make it ultra-handy in the field. First the “grippy” outer material is rubberized and textured so it can provide a firm grip on a support surface as needed. Overlapping Velcro-lined straps allow the bag to be attached to a rifle fore-end, buttstock, tripod head, shooting sticks, or pack. The square cross-section provides secure contact between the rifle stock and support surface. You can easily adjust the firmness of the bag by adding or subtracting filler material. (Some guys will fill their Brick with sand; others may prefer beads or other lighter media to save weight.) The panel under the strap is nylon to allow the shooter’s hand to easily slide underneath the strap when desired.
Our friend Gavin Gear of UlimateReloader.com recently visited a SilencerCo dealer in the state of Washington, The Range LLC in Yakima, WA. Gavin was able to test a number of suppressors (aka “moderators” or “silencers”) for both rifle and pistols. Gavin recently released a lengthy article covering his experiences. If you are in the market for a suppressor, we highly recommend you read Gavin’s SilencerCo Products Overview on UltimateReloader.com.
Gavin was able to test three SilencerCo suppressors: the Omega 300, the Hybrid, and the Osprey 45. In addition Gavin was able to handle the Maxim 9, an integrally suppressed 9mm handgun.
Gavin reports the Omega 300, which is rated up to .300 Winchester Magnum, is a very popular “can”. According to Gavin, the Omega 300 has become the best-selling rifle suppressor in history for important reasons. First, it has an integral muzzle brake. Second, it can work for multiple calibers, from .223 up to .308. Third, “It is very tough — .300 Win Mag rated, and full-auto rated”.
SilencerCo lineup, from left: Omega 300, Hybrid, Osprey 45
Gavin says the Hybrid Suppressor is an interesting concept: “One suppressor that you can configure for multiple calibers, both rifle and pistol. This includes the ability to change out the threaded mount on the muzzle end, and you can also swap out end caps that will optimize sound suppression for different calibers. The Hybrid… is full-auto rated, and can handle rifle cartridges up to and including .338 Lapua Magnum! But this suppressor can also be used for pistol applications…from 9mm up to 44 ACP.”
