Did you know you can damage your hearing even if you are wearing the best hearing protection available? Well, have you ever heard of concussion (or concussive) hearing loss? There is no amount of anything you can put in or over your ears to protect you from concussion loss. My audiologist explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones.
Editor’s NOTE: This may be the most important tech article we’ve run all year. It explains how you can suffer inner ear damage and hearing loss even if you use earplugs or muffs. Read that again — hearing loss even with typical hearing protection. This kind of concussive hearing loss can result from shooting with muzzle brakes in confined spaces. Using a suppressor (aka sound moderator) can reduce the risk of concussive hearing loss. You may not have the ability to use a suppressor, but this article explains how you should be more mindful of your hearing.
Why I Use a Suppressor (Preventing Concussive Hearing Loss)
It must have been the road noise. I thought I was having a hard time hearing my five year old daughter speaking to me on my cell phone because of the road noise. That old SUV was kind of loud inside. Until I switched the phone to my left ear and suddenly I could hear her just fine. Wait, what just happened? I moved the phone back to the right ear and there was that muffled voice again. That’s when I knew I had a problem.
“What?” Lots of us in the shooting community have lost some hearing along the way due to our time on the range or in the field. Those of us who hunt have certainly discharged a firearm or three without ear protection and without concern for our hearing. After all, it’s just one shot, right? How much can it hurt?
Actually, that one shot DOES hurt your hearing. Any sound over 140 dB is immediate hearing loss. It just happens to be killing a small amount of our hearing so most of us continued the practice without a care. Living with hearing loss now makes me wish I could go back 20 years and better protect my hearing. I can’t change what I did in the past, but going forward I can certainly do the most to protect the hearing I still have.
I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible.
I shot my first suppressed firearm, a .22 LR pistol, in 2003. After a few rounds I wondered why everyone (who can do so legally) didn’t shoot suppressed? No one drives without a muffler. Why would you? Point is I immediately appreciated the hearing protection benefits of suppressors. That passion got me into the business of selling suppressors and it wasn’t long before I was one of the biggest retailers for companies like AAC, SWR, SilencerCo, Ops Inc. and others. [Editor: The author’s business, Accurate Ordnance, no longer sells suppressors. So this article is NOT a sales pitch. Mark just wanted to share his experience so others might protect their hearing.]
Did you know you can damage your hearing even if you are wearing the best hearing protection available? You’ve heard guys say, “I’ll wear plugs and muffs, so I’ll be just fine shooting that .50 BMG!” Well, ever heard of concussion (or concussive) hearing loss? Yeah, I hadn’t either. I’ll sum it up the way the last audiologist I spoke with about my hearing loss did – there is no amount of anything you can put in or over your ears to protect you from concussion loss.
A hand grenade went off right next to a buddy of mine. He lost some hearing as a result of the blast. No one is really surprised by that. I mean it is an EXPLOSION. It’s loud. Duh. But I had no idea the blast from a muzzle brake could basically hurt my hearing the same way. The doctor explained to me the concussion comes through the facial bone structure and damages the ear’s tiny bones. Same thing as what can happen through any TBI (traumatic brain injury).
I’ve owned quite a few different suppressors over the years and have shot just about everything out there. I’m still as big a fan as ever. However, I wanted to see if using a suppressor in PRS (Precision Rifle Series) and similar matches was actually a hindrance. Some people feel the added length and weight of a suppressor can make getting into some shooting positions slower or problematic. So I decided to shoot about a year with a muzzle brake instead of a suppressor. I sure regret that decision…
Getting Headaches at PRS Matches Was Warning Sign
It is fairly common in PRS matches to shoot through pipes, vehicles, inside “shoot houses” and around other obstacles that echo a rifle’s blast. I noticed I was starting to get headaches about halfway through a day of PRS match shooting. I knew the issue wasn’t hydration. I mean look, if you are peeing every other stage down at the amazing CORE range facility in mid-summer you are NOT dehydrated. So, what was causing the headaches? It wasn’t until I went back to shooting suppressed in those same environments that it became clear the little mini concussions from that muzzle brake was causing my headaches. And of course the doctors confirmed that.
Let me stop here and say I am NOT anti-brake. Muzzle brakes are useful tools and for some situations are the best tools. An aggressive brake can be more effective at reducing recoil than a good suppressor. A suppressor does add some recoil reduction, just not as much as most quality brakes. Don’t forget to factor other variables, such as caliber and rifle weight, into the equation though. For example, a 15-lb 6mm Creedmoor rifle doesn’t need much recoil reduction in the first place.
So, I started shooting matches long before the PRS even existed and always shot suppressed in those days. The suppressors made communication with a partner or RO easier and it was just a more pleasant shooting experience. On the recommendations of a few people I decided to shoot about a year’s worth of matches with just braked rifles. That year is when I lost significant hearing in my right ear and some in the left. I’ve gone back to shooting only suppressed rifles whenever possible and especially at matches. I’ve only once or twice found the extra length of the suppressor made it a little more inconvenient to run a stage, but not by much. Trust me, the points I missed were not because I took two extra seconds getting the muzzle in a port or window.
My hearing is something I value and will do everything to protect from this point forward. You’ll never again see me on a match field with an un-suppressed rifle. To me the minimal gains of running a braked rifle aren’t worth losing more hearing.
Choosing a Suppressor — What to Consider
Okay, so I have hearing loss that I can’t get back and realize I need to go back to shooting matches with a suppressor. But which one? I’ll still be shooting matches with custom fit plugs so I just need something to add a little recoil reduction and kill that concussion.
At our shop, Accurate Ordnance, we generally recommend direct-thread suppressor solutions to our customers. The main reason for that is all the problems we’ve seen with other fast-attach muzzle devices. It doesn’t take much tolerance stacking to result in accuracy issues. There are a few exceptions for us and the Rugged Suppressors products top the list. Since the Razor 762 uses a muzzle brake adapter on the rifle to attach the suppressor, I can use the same suppressor on my .223 Rem training rifle. My primary match rifles are chambered in 6mm Creedmoor and 6.5 Creedmoor and the muzzle threads on those is a standard 5/8×24. My .223 Rem training rifle has .5×28 threads on the muzzle, which is standard for that caliber. Thus, the muzzle adapter interface lets me share the suppressors between all the rifles. And on that .223 Rem training rifle I have the option of switching the end cap on any of the Rugged products to a .223 aperture size, which makes the suppressors slightly more sound efficient (meaning quieter).
The Everyday Sniper Podcast is a streaming audio series about long range shooting, precision rifles, firearms, training, and industry updates. The podcast is a joint effort of Sniper’s Hide and Mile High Shooting. Podcast host Frank Galli is well known to precision shooters. Frank, a military veteran, is the founder of Sniper’s Hide, and he regularly tests tactical rifles and related equipment. He also runs the Sniper’s Hide Team Challenge each year. This year’s Challenge runs June 1-3 in Washington State.
For the Everyday Sniper podcast, Galli has brought together firearms industry experts, top gunsmiths, and ace shooters. They share their knowledge and on-the-range experience. You’ll find a wealth of information on tactical and long-range gear, plus tips on PRS competition and more.
Here are the three latest Everyday Sniper podcasts:
This episode include Seekins After Action Report along with Glen Seekins interview. Frank notes: “During my ride back from Idaho I talk about my trip to Seekins Precision and then follow it up with my interview where we talk about Glen’s history and his six degrees of separation between Sniper’s Hide and Seekins.”
Click to launch Podcast on Everyday Sniper Website:
Everyday Sniper Episode 46:
Magpul Pro 700, Bedding Chassis, Wind Video and more
April 17, 2018
Welcome to the Everyday Sniper Podcast. Frank here, Mike is at MHSA working the counter. In this episode we talk about the new Magpul Pro 700 Chassis, and the KRG Bravo Chassis. Other topics include: Wind Video, Technology Sucks, Suppressor Follow-up, Busted Shoulder.
Click to launch Podcast on Everyday Sniper Website:
The Everyday Sniper Episode 45:
Tripods, Truing, and Terrain
April 15, 2018
Mike and Frank return with Part Two of weekly recap conversation. In this episode, they expand on key points of the previous episode, and cover some additional topics:
Tripod Shooting – RRS
Positions with Tripod
Training getting in and out of position
Getting closer vs shooting subsonic
Seekins Precision Rifles
RRS Dovetail Accessories
SP10M vs SP10
AA Targets Truing Targets
We want to congratulate Bryan Litz and his talented team at Applied Ballistics LLC. We have followed Bryan’s career as a bullet designer, ballistician, author, software product developer, and ELR pioneer. His team leads the world in advancing the science of long range shooting. And it looks like all the hard work has paid off — Applied Ballistics has secured a major contract to develop extreme long-range sniper capability for the U.S. Military.
Applied Ballistics LLC, a Michigan-based tech company, has been awarded a $1,300,000 contract by the Combating Terrorism Technical Support Office (CTTSO) to execute Phase 1 of the Extreme Sniper Strike Operations (ESSO) project.
Phase 1 of the ESSO project is focused on advancing the predictive capabilities of modern ballistic solvers by performing Doppler radar measurement and modeling of current service rounds at Extreme Long Range (ELR) as a function of gyroscopic stability, and refining the models of secondary ballistic effects such as spin rate decay and spin drift at ELR. Phase 1 will conclude with the ballistic modeling enhancements being integrated into the existing Applied Ballistics ecosystem of electronic devices which are currently deployed by numerous U.S. and allied armed forces around the world. Phase 1 is scheduled for completion in late 2018.
Phase 2 of the ESSO project is a potential follow on (2019) that focuses on the development and fielding of an advanced ELR sniper rifle system designed to drastically increase first-round hit probability at ELR on man-sized targets. The Applied Ballistics Weapons Division is currently conducting research and development on weapons platforms, as well as new cartridge and bullet options, that will maximize ELR ballistic performance from lightweight, practical, magazine-fed systems.
Bryan Litz, owner of Applied Ballistics LLC, said: “Our team of Aerospace, Mechanical, Electrical and Computer Science Engineers, and Technicians will apply our combined experience including years of testing and competing in ELR Shooting to the successful completion of the ESSO program objectives. This means extending the maximum effective range of U.S. and allied snipers, achieving decisive overmatch on the battlefield. I can’t imagine a better application of Applied Ballistics’ collective efforts.”
Applied Ballistics has developed ballistics software for mobile Apps. AB’s software has been integrated into numerous products including Kestrels, Laser Rangefinders, and “Smart” optics.
Applied Ballistics Seminar in Utah, June 2-3, 2018
Applied Ballistics will offer a Ballistics Seminar June 2 and 3, 2018 at the Snowbird Cliff Lodge, Salt Lake City, Utah. This will include two full days of instruction with lectures plus Q&A sessions. The $625 cost of the seminar includes all 5 AB books, both AB DVD sets, AB Analytics, and Swag Bag.
CLICK HERE to Register. NOTE: Through April 17th, get $100 Off with discount code ABSEM100.
About Applied Ballistics, LLC:
Applied Ballistics’ mission is to be a complete and unbiased source of external ballistics information for long range shooters. We believe in the scientific method and promote mastery through understanding of the fundamentals. The results of our work are passed on to the government and shooting communities through clear and helpful instructional materials, as well as easy-to-use ballistic software running on many products.
The Sureshot Armament Group (SAG) has developed a modular aluminum chassis for the vintage, straight-pull Swiss K31 rifle. This chassis transforms an old classic into a modern, fast-cycling tactical rig. The SAG Lightweight K31 Rifle Chassis is CNC-Machined from aluminum. Hard anodized, it weighs just 2 lbs. 13 ounces. It offers adjustable cheek piece and butt-pad, with a three-inch LOP adjustment range. Believe it or not, installing a vintage K31 into this SAG stock is an easy bolt-on process. No modification of the K31 action is required.
The chassis-builder SAG states: “The main idea behind the SAG Lightweight K31 Rifle Chassis was to give the shooter …ergonomics of a Tube-gun but with lines of the classic rifle. The chassis ‘wraps’ the shooter around the rifle, moving bolt operation under the shooters cheek to allow the marksman to maintain cheek weld during the whole shooting series.” The chassis design also allows a more forward optics placement for better eye relief.
SAG Lightweight K31 Rifle Chassis Features:
CNC-Machined Aluminum with hard-anodized matte finish
Easy bolt-on installation to Swiss K31
Adjustable Cheek Piece (0-30mm)
Adjustable Buttpad to set LOP (11.5” – 14.5”)
KEYMOD Interface on fore-end and buttstock
Accepts any AR-type pistol grip
Overall chassis weight: 2 lbs. 13 oz. (1280 grams)
Chassis MSRP: €950 ($1163.00 USD)
About Switzerland’s Original Karabiner Model 1931 (K31)
The Karabiner Model 1931 (K31) is a magazine-fed, straight-pull bolt action rifle. It was the standard issue rifle of the Swiss armed forces from 1933 until 1958, though examples remained in service into the 1970s. It has a 6-round removable magazine, and is chambered for the 7.5×55mm Swiss Gewehrpatrone 1911 cartridge (aka GP 11).
Wiki Photo by Bouterolle, CC BY-SA 3.0
Although the K31 is a straight-pull carbine broadly based on previous Swiss “Schmidt–Rubin” service rifles and carbines, the K31 was not designed by Colonel Rudolf Schmidt (1832–1898) as he was not alive in 1931 to do so. Mechanical engineer Eduard Rubin (1846–1920) was the designer of the 7.5×55mm Swiss ammunition for which previous Swiss service rifles and the K31 are chambered. The Karabiner Model 1931 was a new design by the Eidgenössische Waffenfabrik in Bern, Switzerland under Colonel Adolf Furrer (1873–1958). The Karabiner Model 1931 replaced both the Model 1911 rifle and carbine and was gradually replaced by the Stgw 57 from 1958 onwards.
Practical/Tactical shooting disciplines such as the Precision Rifle Series are today’s fastest-growing forms of rifle shooting competition. More and more shooters are enjoying the fun of tactical-style matches shot “on the clock” from a host of challenging positions. PRS competitors must rapidly engage a number of reactive and steel targets, while shooting offhand, prone, behind barricades, off tripods, and from a wide range of other positions.
The popularity of the original centerfire PRS format, which now draws hundreds of competitors at major matches, spawned a PRS spin-off for rimfire shooters. A year ago, the Precision Rimfire Challenge (PRC) was launched. Modeled on centerfire PRS competition, the PRC is a new .22 LR rimfire shooting game. Call it “PRS Lite” — a practical-style, multi-stage match shot with .22 LR bolt-action and self-loading rimfire rifles.
With the success of rimfire tac comps, the PRS has decided it’s time for air-gunners to join the fun. Starting in May 2018, the PRS will offer airgun side-matches at the most popular PRS events, including the High Mountain Shootout (June), Heatstroke Open (July), and GAP Grind (October). Sponsored by AirGun WareHouse, the new PRS airgun side-matches will be run as a new, season-long Precision Rifle AirSoft Series (PRASS). Competitors can use a variety of pneumatic airguns from makers such as Beretta, Crosman, FN Airsoft, and KWA Airsoft.
“The Precision Rifle AirSoft Series (PRASS) is perfect for newcomers to the tactical game who want to start with a low-cost, ultra-safe competitive experience that still offers the look and feel of the PRS tactical lifestyle. It’s great for young people as well as individuals who may be wary of real firearms. This may prove ideal for Millenials.” — PRS Competition Committee
If PRS (PR-“Es”) costs too much, try PRASS (PR-“Ass”), the AirSoft version. With AirSoft rifles costing less than $150.00, PRASS is way more affordable!
PRS Marketing VP Jeff Wilson expects the AirSoft Series to be a huge success: “We know that most purchasers of tactical-style rifles rarely, if ever, actually shoot their guns because it takes too much time to train, and the cost of ammo is prohibitive. In addition, many new shooters are sensitive to the noise and recoil of actual firearms. And, let’s face it, some guys want to look tough, but they’re really just weenies. Our AirSoft Series addresses all those concerns. The guns are inexpensive, the ‘ammo’ costs pennies, and the air is always free!” Wilson also noted that airguns provide an ideal introduction to the shooting sports for newcomers: “Airguns are easy to shoot, and they can be purchased without background checks or waiting periods. They are great starter tools for new shooters. You can experience our full PRS tactical lifestyle at a fraction of the price. While these days PRS is just too costly for many, PRASS will be affordable for all!”
The AGM MK96 AirSoft Rifle looks just like the real thing. Yet it costs just $131.95 with optic. That’s less than 5% of what a good centerfire PRS rig would cost! CLICK HERE to order — No FFL Required!
The Precision Rifle AirSoft Series (PRASS) Offers Low-Cost Tactical Fun:
Kelly McMillan recently released a Video Podcast featuring some very talented shooters including the legendary David Tubb. While Kelly has broadcast scores of audio interviews on his Taking Stock Radio Show, this is something even better — you can see Kelly’s guests on camera during the 68-minute-long Video Podcast:
David Tubb Talks Cartridge Design, ELR, and Much More
The show starts off with legendary marksman, David Tubb, winner of 11 NRA National High Power Rifle Championships as well as multiple National Long Range championships. Kelly notes: “Our first guest, David Tubb, is arguably the … winningest, competitive rifleman in history. Trophies aside, though, David’s biggest contribution to our shooting sports is his innovative mind. The underlying essence behind his company, Superior Shooting Systems, is the continued advancement of the ‘human factor’ in the shooting sports.” During this segment David addresses many topics, including cartridge design (6XC and 6.5 Creedmoor), ballistics, Extreme Long Range (ELR) shooting, optics, stocks and more.
Regina Milkovich — Top PRS and Tactical Competitor Facebook Photo and courtesy WellArmedWomen.
Kelly’s next guest is Regina Milkovich, the first woman in history to win a major practical/tactical precision rifle match outright. (Regina was the overall winner of the 2016 NorCal Tactical Bolt Rifle Challenge.) Regina has been successful in many disciplines, and is now active in the Precision Rifle Series (PRS). Starting at the 44:50 time-mark in the video, Regina shows off her current PRS rifle, chambered for the 6XC cartridge. It features a McMillan stock, Defiance Action, Vortex Razor Gen 2 scope, and Timney trigger. Tactical shooters will want to watch this segment. Regina reviews the many accessories she uses both on and off the rifle. She shows the support bags she favors and discusses how the right choice of equipment can help improve your scores.
“[This is] one of my all-time favorite pictures” Regina told us. “It was taken in Vegas at a Sin City Precision match a couple of years ago.” Facebook photo.
Kelly also chats with Buzz Miller, an industry product development specialist who has worked with large gun-makers including FN USA, and Taurus. Buzz talks about how new gun designs are conceived, proto-typed, tested, and introduced into the marketplace. Buzz also discusses customer service among other topics. The main Buzz Miller segment begins at the 41:20 time-mark.
Plan to buy or build a 224 Valkyrie rifle this year? Well now you can get the official specifications for the new 224 Valkyrie cartridge and chamber. The Sporting Arms and Ammunition Manufacturers’ Institute (SAAMI), has released its official 224 Valkyrie “blueprint” which you can now download for your records. SAAMI approved the Federal Premium 224 Valkyrie as an official new cartridge this past January. The 224 Valkyrie’s SAAMI standards documents are now published and available to the industry as a whole, as well as to the public.
SAAMI allows free access to technical data and drawings for cartridge and chamber designs, which are posted in the Specifications section of SAAMI’s website. All cartridge and chamber drawing documents are contained within the ANSI/SAAMI Standards and can be found on www.saami.org. The New SAAMI Cartridge Cartridge/Chamber Designs for 224 Valkyrie can be viewed here: http://www.saami.org/PDF/224-Valkyrie-Introduction.pdf.
About the 224 Valkyrie Cartridge
Federal Premium’s 224 Valkyrie is based on a 6.8 SPC case necked down to 22 caliber. The Valkyrie has a shorter case than the .223 Remington (and 5.56×45 NATO). This allows you to load the longest, heaviest .224-caliber bullets and still feed reliably from an AR15-type magazine. The 224 Valkyrie offers flatter trajectories than other AR15 mag-friendly cartridges, including the 22 Nosler, .223 Rem, and 6.5 Grendel. With heavy projectiles, the 224 Valkyrie boasts impressive ballistics — it can stay supersonic past 1,300 yards. Plus it has roughly half the recoil of larger cartridges offering comparable ballistics, such as the 6.5 Creedmoor (see chart below).
SAAMI’s work creates standards for the cartridge, increasing safety, interchangeability, reliability, and quality for firearm manufacturers building rifles chambered for the 224 Valkyrie. Federal Premium Ammunition President Jason Vanderbrink notes: “SAAMI’s approval of the cartridge was a crucial step in legitimizing [the 224 Valkyrie] within the industry”.
The Role of SAAMI in Creating Uniform Ammunition Standards
SAAMI was founded in 1926 at the request of the federal government and tasked with creating and publishing industry standards for safety, interchangeability, reliability and quality, as well as coordinating technical data. SAAMI’s Technical Committee, which consists of firearm and ammunition industry experts, reviewed the 224 Valkyrie submission over a period of about six months. The official cartridge name, maximum cartridge and minimum chamber dimensions, pressure limits, test equipment, and other characteristics are all considered and scrutinized during the process.
Magpul has released a new modular chassis that should generate interest in tactical and PRS circles. Priced at $999.95, the Magpul Pro 700 Chassis is expensive — you can buy a complete Ruger Precision Rifle for less than that. But it looks like it has some impressive features that may justify the cost. The buttstock section features fast, ambidextrous controls for LOP and cheek-piece height. The Pro 700 features a strong, internal aluminum sub-chassis, with an universal bedding block section that works with both right-hand and left-hand actions.
Video Shows Key Features of Magpul Pro 700 Tactical Rifle Chassis:
Q: So what do you guys think — Is this thing worth a grand ($1000)?
Magpul Pro 700 Chassis Features
— Anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and fore-end with high-strength, injection molded polymer body covers.
— Ambidextrous bedding block for left-hand or right-hand actions.
— Folding stock with push-button hinge has left- or right-folding capability.
— Stock won’t interfere with bolt handle when folded.
— Fixed Stock adapter for non-folding use.
— Overall LOP adjustment range is 13.25” – 15.125”
— Butt pad adjusts up 1.33″ and down .90″ and 5° left or right.
— Comb height adjustment has a 1” range with locking knob for cheek piece.
— Cheek riser features a 3-position fore/aft adjustment.
— Polymer grip with 5° forward edge sweep, with 3/4” fore/aft trigger-reach adjustment.
— M-LOK® slots on fore-end for accessory mounting.
— Integrated AICS-pattern mag well for AICS-pattern short action magazines.
— Large trigger guard allows use with gloves and aftermarket triggers.
— Low-profile, anti-snag ambidextrous magazine release.
Product find by EdLongrange. We welcome reader submissions.
For many riflemen, reading the wind is the toughest challenge in long-range shooting. Wind speeds and directions can change rapidly, mirage can be misleading, and terrain features can cause hard-to-predict effects. To become a competent wind reader, you need range-time and expert mentoring. In the latter department, Frank Galli, founder of Sniper’s Hide, offers a detailed digital resource: Wind Reading Basics for the Tactical Shooter.
Wind Reading Basics is much more than a 47-page eBook — it has charts, instructions for ballistic calculators, and even embedded videos. Galli explains: “We break down the formulas, walk you through using a ballistic computer, and give you all the information in one place. From videos, to useful charts, we make it simple to get started. It’s all about having a plan, and we give you that plan.”
Galli’s Wind Reading Basics, priced at $7.99, can be downloaded from iTunes for iPads, iPhones and iOS compatible devices. Here are sample sections from the eBook (which includes videos):
With the support of these sponsors, the 6.5 Guys have collected over $10,000 worth of prizes.
Here is your chance to win some great prizes, including a Bergara B14 Rifle, Defiance Action, Nikon FX1000 Scope, Manners Stock, KRG Chassis, and over 30 more great products. All combined, these prizes are worth over $10,000. All prizes will be given away to visitors to the 6.5 Guys Facebook page who comment on the 6.5 Guys’ SHOT Show videos. No purchase necessary. Winners will be selected next Saturday, March 17, 2018. NOTE: Readers don’t hesitate. This is a great opportunity. For some of the prizes there are less than 80 commenting entrants now, so your chances are very good indeed!
How To Enter in the Prize Contest — Quick Summary
1. Go to 6.5 Guys Facebook Page.
2. Watch one or more linked 6.5 Guys SHOT Show Videos.
3. Comment on the Videos on Facebook, and tell two Facebook Friends.
The more videos you comment upon, the better your chances of winning!
To qualify to be selected in each random drawing for a prize, participants must complete the following tasks for each vendor promotion. First, “Like” the 6.5 Guys Facebook page and the vendor’s Facebook page. Second, leave a comment on the original 6.5 Guys’ post for the vendor’s SHOT Show prize promotion that includes a hashtag “shout out” to the donating company. Finally, you are asked to tag two friends on Facebook that could also benefit from the prize(s).
Everyone should be sure their LIKES and COMMENTS are within the original post(s) on the 6.5 Guys’ Facebook in order to qualify to enter the drawing(s). That’s it. For details on what products will be available to win and how to participate in each drawing, refer to the instructions on each of the SHOT Show videos on the 6.5 Guys’ Facebook page.
Mile High Shooting Accessories
$500 gift certificate towards the purchase of an AI product
Two Traust Shooting Bags
Nikon
FX1000 6-24x50mm SF, Illuminated MRAD Rifle Scope
RANGEX 4K Laser Range Finder
Phone Skope
Three – Phone Skopes
Rifles Only
50% discount of the Rifles Only signature Precision Rifle 1 & 2 Course
Seekins Precision
Scope mount or rings of winner’s choice
ShadowTech
Two – SS Loophole Slings
Spuhr
Spuhr Mount of winner’s choice
Tab Gear
PRS Sling
Two Large Rear Bags
Two Small rear bags
Thunder Beast Arms
TBA 22 suppressor
Vortex Optics
HD Razor Gen 2 Rifle Scope
XLR Industries
XLR Envy Chassis Package
All prizes will be awarded through a series of random drawings to take place during a Facebook live event to be held on Saturday, March 17th 2018 at 5:00 PM Pacific. Participants must be 18 years of age and reside in the USA. To learn more about prizes and how to participate in each drawing, refer to the detailed instructions on each of the SHOT Show videos on the 6.5 Guys’ Facebook page.
Fine print: 6.5 Guys, LLC reserves the right to modify the product description at any time for clarity or for any other reason deemed necessary. 6.5 Guys is coordinating the random selection of winners for each promotional drawing and will provide the winners’ contact information to each vendor for fulfillment of prizes. Adherence to all applicable laws and regulations, including those pertaining to the transfer of firearms, NFA items and ITAR regulated items, is the responsibility of the winner and the vendor. 6.5 Guys LLC does not provide any express or implied product warranties or endorsements of any type.
