Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 11th, 2009

J & J Ammo Boxes for BR and PPC Cartridges

Many readers have asked, “Is there an ammo case that holds BR and PPC cases securely without a lot of extra space?” Yes, the J & J BR-100 Ammo Case fits BR-sized cases just right, and costs just $4.38. Available in semi-transparent Blue, Red, White, Smoke, and Camo, you can purchase different-colored cases to suit different loads. Or keep your match ammo in one color case, and your varmint ammo in another color box.

The J & J cases aren’t your only option of course. Many folks use the large green/red MTM 100-round ammo boxes for transporting 6BR and 6PPC ammo. The big MTM boxes work fine with loaded rounds, but not so great with fired cases. If you tip the MTM box on its side, the empties can spill out. That’s frustrating if you’ve meticulously sorted your cases. You can put a layer of foam over the empty brass to avoid the problem, but the J & J cases are a cheaper, more compact solution. J & J’s 100-round BR-100 ammo case has tighter vertical clearance, so your empties won’t come out of their slots if the case tips over or is stacked upside down.

In addition to the BR-100 case, varminters who need to carry large numbers of loaded rounds should check out J & J’s 175-round Rifle Ammo Case. This foam-lined ammo transporter, item LR-175-2, costs $16.54 and is the largest-capacity ammo case we’ve found. For more info go to JandJProducts.Com.

30 BR Ammo

Permalink Gear Review 2 Comments »
January 10th, 2009

Shooting Mats for Bipod and Prone Shooters

We’ve been doing a lot of bipod shooting lately with the Anschütz 64R Biathlon rifle we’ve received for testing. (Great little rifle by the way — accurate, ergonomic, versatile. It’s a definite winner for the Rimfire Tactical game.)

Anschutz 64R biathlon rifle

rifle shooting mat padShooting off the ground with bipod has taught us the importance of a good, comfortable shooting pad, with non-slip areas for the ‘pod legs and sufficient length (and thickness) to cushion our middle-aged hips and knees. Creedmoor Sports offers a high-quality Shooting Pad for $75.00. This mat, popular on the High Power rifle range, has a waterproof vinyl bottom and a marine finished top with extended textured non-slip pads for elbow placement. Interior jute padding provides ample protection for the shooter in the shooting position. The Creedmoor pad measures 29.5″ X 68″.

ChampionShooters.com offers a similarly-sized shooting mat with some additional features. The 27″x72″ Champion Deluxe Roll-up Mat is soil-resistant canvas with a vinyl waterproof bottom. It has a 25″ X 21″ rubberized section added to the shooting area. To provide additional protection there are leg flaps on either side at the bottom, together with a dust flap in the front. This pad weighs 8 lbs. and costs $74.00.

rifle shooting mat pad

Desired Upgrades for F-Class Shooting
For F-Class shooting, one thing we’d like to see from the pad manufacturers is a second no-slip, rubberized section in the middle of the mat for the rear sand-bag. We’ve seen some pads that have been modified with a rubber-covered aluminum plate in the middle of the mat for the rear sandbag. That provides great stability for the rear bag, but a hard plate demands that you fold the mat, rather than roll it up.

Permalink Gear Review Post comment »
January 10th, 2009

IBS Annual Meeting Jan. 23-24

The 2009 Membership Meeting of the International Benchrest Shooters (IBS) will be held January 23-24 at the Harrisburg Holiday Inn & Conference Center in New Cumberland, Pennsylvannia. Zip (for finding directions) is 17070. On Friday, the 23rd, there is a social get-together starting at 7:00 pm. Serious business commences Saturday morning, the 24th, at 9:00 am sharp. For hotel reservations, call (717) 774-2721, and ask for the special “International Benchrest Shooters” (IBS) rate.

Active IBS members in the region should attend if possible. Many important topics are set for discussion on the 2009 Meeting Agenda. IBS President Jim Borden also reminds members that annual dues are now $50.00 for regular members and $15.00 for associate memberships.

CLICK HERE to download the Full Agenda for the IBS Meeting. (Adobe .pdf file)

Permalink News Post comment »
January 9th, 2009

QuickLOAD Software Updates Available

QuickLOAD reloading softwareQuickLOAD is a unique software product that draws upon a vast database of cartridges, bullets, and powders to analyze (and predict) load pressures and velocities. While QuickLOAD data should NOT be substituted for careful, conservative load recipes based on powder manufacturers’ recommendations, QuickLOAD is still a remarkable tool that can save you time and money. QuickLOAD can help you identify the most efficient powders for a particular cartridge/bullet combination, and it can also predict how changes to barrel length or seating depth can affect velocities and pressures. We recommend that serious reloaders consider investing in QuickLOAD, a $149.95 product from Neconos.com. To learn more about QuickLOAD, read our SOFTWARE REVIEW.

CLICK HERE for AccurateShooter.com QuickLOAD Review and User’s Guide

Update Your QuickLOAD Software
New Bullet, Cartridge, & Powder Data in Ver. 3.4 — Including Reloder 17
For $14.95, QuickLOAD verion 3.0 – 3.3 users can also purchase a CD-based upgrade to the latest version 3.4. The upgrade provides complete data for many more bullets and cartridges, plus it includes hundreds of cartridge diagrams and photos. We think the upgrade to version 3.4 is well worth the cost for the updated bullet info alone, and the cartridge diagrams are a great new feature. And yes, the latest update includes Alliant Reloder 17 powder. If you are shooting a 6XC, 6-6.5×47, Rem 260, .284 Win, or a Magnum cartridge–Reloder 17 may boost your velocities significantly.

If you are a current owner of QuickLOAD version 2.9 or earlier on floppy disk, you can upgrade to the new CD-ROM for $50.00 + S&H. The latest CD offers more powders (218 total), cartridges (1200+) and bullets (2500+). Order through Neconos.com or call 800-451-3550.

NOTE: If you have QuickLOAD 3.0, 3.1 or 3.2 and want to use QuickLOAD with Windows VISTA you need a VISTA-compatible version. Send in your old CD and Neconos can replace it with a Vista-compatible CD (also works with Windows 98SE, ME, 2000, XP) for $14.95 plus S & H.

Permalink Gear Review Post comment »
January 9th, 2009

CMP Launches National Match Air Rifle Program

Attention High Power and Air Rifle Shooters — The CMP is introducing a new event called “National Match Air Rifle”. This new discipline features two courses of fire similar to the High Power rifle standing and John C. Garand courses of fire. These stages will be shot with air rifles on reduced High Power 200- and 600-yard targets on 10-meter ranges. There will be three rifle classes: sporter, match/precision and AR-type air rifle.

Initial Test Match at Camp Perry This Weekend
Here’s your chance to get involved in the launch of a new shooting sport. The CMP will hold a test match at the Camp Perry Marksmanship Center on 10 January. This inaugural match will be held at the CMP’s new Camp Perry Marksmanship Center that offers 80 firing points equipped with state-of-the-art electronic targets and an electronic display system.

Camp Perry Marksmanship Center

The CMP invites both experienced High Power shooters and recreational air gun shooters to participate in the test match. Shooter feedback from test matches will help the CMP finalize the rules and course of fire. At the match, the “prototype”, 10-bull paper AR-SR and AR-MR Nat’l Match targets will be displayed. You’ll also have a chance to view new industry prototype AR-style air rifles. There will also be a Novice Prone Match that can be fired by younger juniors who are just getting started in target shooting (see Match Program .pdf for details).

CLICK HERE for Match Registration Form.

CLICK HERE for Test Match Program .pdf and Event Schedule.

Feinwerkbau air rifle

Permalink Competition, News 1 Comment »
January 8th, 2009

Nightforce Introduces New NXS 2.5-10×32 Scope and New Ballistic Reticles

Nightforce has unveiled its new NXS 2.5-10x32mm compact scope. Made in the USA, this scope was created to answer the requests of hunters for greater low-light capability in a compact, lightweight optic. The NXS 2.5-10×32 measures 12″ long and weighs just 19 ounces. The new NXS 2.5-10×32 has a larger exit pupil than the 2.5-10×24 NXS. This improves light transmission and allows faster target acquisition. Both compact scopes are bright and rugged. In fact, Nightforce compact NXS scopes were originally created for the U.S. Special Forces for use with night-vision devices.

Nightforce 2.4-10x32 scope
Shown with optional ZeroStop and windage limiter turrets.

Nightforce 2.4-10x32 scopeMultiple Choices for Elevation/Windage Click Values
The NXS 2.5-10×32 is available with fully enclosed hunting-style turrets with 1/4-MOA clicks, or exposed target-style turrets with either 1/4-MOA clicks, 0.1 Mil-Rad clicks, or 1.0 MOA elevation + .5 MOA windage adjustments. The target-style turrets include the Nightforce ZeroStop control. This allows quick return to zero regardless of previous elevation adjustments.

New Ballistic Reticles for Compact NXS Scopes
Three new ballistic reticles are also being offered with Nightforce 2.5-10×32 and 2.5-10×24 NXS Compacts. Designed for hunting to 600 yards, the family of reticles are based upon a common NP-1 design, but with three different configurations for high, medium, and low-velocity cartridges respectively. Among the three reticles, you’ll find one that adapts well to most common hunting cartridges.

The ballistic reticles are designed to be sighted-in at 200 yards. Elevation lines are marked in 50-yard intervals to 600 yards, including a 100-yard mark.This gives you the ability to quickly hold-over in known intervals, so you can engage targets at multiple distances without cranking your scope knobs. With the new reticles, windage compensation is also marked in 5 and 10 MPH increments–so you can quickly respond to wind changes by shifting to a hash mark left or right of center. Nightforce claims that this “smart reticle” system has been proven to be up to twice as fast as traditional rangefinding reticles.

For more info, contact Nightforce Optics in Idaho, (208) 476-9814, or visit Nightforceoptics.com. At the 2009 SHOT Show, Nightforce has booth #9381.

Permalink New Product, Optics Post comment »
January 7th, 2009

Cayle's Barrel-Block 22-250AI Pistol

Here’s an innovative and handsome piece of workmanship by Cayle Davis, whose company, C&J Machine, builds advanced rests for precision pistols. Shown below is a brand new barrel-block pistol on one of Cayle’s rests. Cayle tells us: “Here’s another project I just finished today. It’s a barrel clamp pistol, built on an XP-100 action, with a Hart 2 oz. trigger. The action is completely floated. The gun is chambered as a 22-250 Ackley Improved with a .250″ neck. Fitted is a 1:7″ twist, 1.2″-diameter, straight-contour, 18″ Douglas barrel. I think this may be a first… I hope it shoots!”

C&J Machine XP100 pistol

C&J Machine XP100 pistol

To learn more about this gun, or if you’re interested in the one-piece rest, contact Cayle via email: xpfuzz [at] consolidated.net, or you can write to the address below:

Cayle Davis — C & J Machine
Box 18
Palmer, IL 62556
Phone: (217) 827-0588

Permalink Gunsmithing Post comment »
January 7th, 2009

Forum Classifieds Feature Work of Top Smiths

There are some nice items up for sale right now in our Forum Classifieds at tempting prices, with gunsmithing done by some of America’s top smiths. Here are a couple highlights from the Classifieds. The first is a barrel-block long-range gun smithed by Jerry Simison. The second is a high-power stock crafted by Alex Sitman.

6-6.5×47 Long-Range Rifle with Barrel Block
Bill B. (aka “338 Laz”) is offering a handsome 6mm Coyote (6.5×47 Lapua necked to 6mm) long-range rifle with a barrel block. This gun was chambered by Jerry Simison, (218) 532-7007, with barrel block and fitting By Tony Larson (both highly respected smiths). The gun features a Remington 721 action, and a Krieger 1:8″ twist barrel, with .275″ chamber neck. Bill reports: “I used it for my first year at 1000-yard benchrest shooting. Won a match with it and was always in the running I did my part. It has about 500 rounds through it. Comes with Brass. Jerry’s will make some dies for you if you want.” The price is $1600.00. Email bill.behnke [at] yahoo.com for questions. CLICK HERE for more pictures.

6-6.5x47 rifle

6-6.5x47 rifle

Master Class High Power Stock (left-hand)
Here’s a selection for you South-Paws. You may know that Alex Sitman of Master Class Stocks does some of the best stock-work in the country. But his work is in high demand so you can expect to wait months for custom projects. Here’s a High Power match stock that sold for $900 new. It’s now offered for just $495. Seller SwedeJohn reports “This stock has been shortened somewhat and the cheek piece has been sanded. It is bedded for Rem 700 Short Action.” Email fiveptjon [at] aol.com with questions. CLICK HERE for more photos.

master class left high power stock

master class left high power stock

master class left high power stock

Permalink Hot Deals Post comment »
January 7th, 2009

Timney Introduces New Trigger for Ruger 10/22

Next week, at SHOT Show, Timney Triggers will introduce a new single-stage, drop-in trigger for the popular Ruger 10/22 rimfire rifle. The Timney 10/22 trigger will retail for $149.99 and is available for purchase immediately. Here’s the good news. The trigger should be smooth and crisp, as it features Teflon-nickel coated internals, cut with ultra-precise, state-of-the art EDM equipment. The Timney 10/22 trigger is “Made in the USA” and carries a lifetime warranty.

The bad news? On Timney’s web site, the trigger pull weight is listed at three (3) pounds. Timney has not revealed whether the pull weight can be adjusted down from that level. If not, somebody should send the engineers at Timney “back to the drawing board”.

Disappointing 3-pound Trigger Pull
No matter how “smooth and crisp”, a 3-pound pull is not a huge improvement over a factory Ruger trigger. At $149.99, the new Timney 10/22 trigger costs nearly half as much as a bare-bones 10/22 rifle. Will shooters pay this much for a 3-pound trigger?

Consider that Volquartsen’s HP Action Kit for the 10/22 costs $125.00, and will take the Ruger trigger down to about 2.25 pounds. The Volquartsen unit also features an EDM-machined disconnector and sear, plus a target trigger with overtravel adjustment.

Timney may have “missed the boat” on this one. If we were to market a trigger upgrade for a 10/22 we’d want the unit to adjust down to 1.5 pounds or less. Certainly there may be shortcomings in the 10/22’s basic design that make it difficult to go this low, but why bother to bring out a fairly pricey aftermarket trigger, if 3 pounds is the best it can do?

Other New Trigger Designs for 2009
Since last March, Timney has asked shooters: “What trigger would you like us to build next?” This year’s “Customer’s Choice” Timney Triggers will be Mosin Nagant and Husqvarna replacement triggers. Both will be offered for sale in Spring 2009.For more information on Timney Triggers’ line of over 75 replacement triggers, call 1-866-4TIMNEY, or visit TimneyTriggers.com.

Permalink New Product 5 Comments »
January 6th, 2009

SHOT Show Opens Next Week in Orlando

Next week, NSSF’s 2009 SHOT Show will open in Orlando, Florida. Spanning more than 700,000 square feet of exhibition space, the show will bring together exhibitors, buyers and media from around the globe. AccurateShooter.com will be covering the show, providing exclusive photos, interviews, and “first look” reviews of the latest products. Asst. Editor Jason Baney will be working the show for us. We’ve been advised to expect important news from Lapua, Alliant, Hodgdon, Stiller Precision, and some of the major optics makers.

The show officially kicks off Thursday, Jan. 15 at 8:30 am, but Jason will arrive in Orlando a day early to attend the “Media Day” demonstration event at the Orlando Sheriff’s range. Jason will get to field-test new firearms from major manufacturers.

SHOT Show Online Navigator Available
If you’re headed to the show in Orlando, you’ll want to get a floorplan layout. There are so many exhibitors, it’s wise to map out your “plan of attack” in advance. The SHOT Show website features an interactive Online Navigator that allows you to search companies by name, booth, and directory category, so you easily find any exhibitor. Choose a company and you can zoom/pan the Navigator to locate the booth. That makes it much easier to plan your agenda efficiently, and spend less time back-tracking. Using the Navigator, you can easily map all the companies and exhibits you want to see, and create a show agenda that targets your key points of interest.

SHOT Show 2009 floor plan

Regular Updates on Shotshow.org
The official SHOT Show website, www.shotshow.org, will be updated regulary throughout the show. If you’re into mobile computing, you can sign up for Twitter updates for your cell phone or PDA. To get text updates, simply text the words “Follow NSSFComm” to 40404.

Permalink News Post comment »