|
|
June 3rd, 2008

Hornady provides a good, basic Guide to External Ballistics, covering the key principles of small arms ballistics. This is a good starting point to learn how bullet shape, wind, and velocity determine how bullets perform in flight.

If you’ve ever wondered about the meaning of Ballistics Coefficient, or wondered how different zeros affect bullet trajectories, this article will explain the basics that you need to know. Here’s an example:
Ballistic Coefficient Definition
“A ballistic coefficient is the measure of a bullet’s relative ability to overcome air resistance. Each bullet can be assigned a numerical value expressing this efficiency. The basis of this value is a ratio comparing the performance characteristics of a particular bullet against the known trajectory characteristics of a standard projectile. The ratio compares the drag of a bullet (loss of velocity caused by air resistance encountered in flight) to the drag of the standard projectile. Expressed as a formula:

The standard projectile on which all Hornady Bullets were compared was the G1 Model, based on work begun in France and refined at the U. S. Army Ballistic Research Laboratories, Aberdeen Proving Ground, Maryland. Ballistic coefficients for all Hornady Bullets were determined by computer calculations using data from test firing research performed in our 200 yard underground test range.”

Hornady also offers a free, interactive Ballistics calculator on its web site. While not as detailed or sophisticated as the JBM web ballistics calculator, the Hornady Ballistics Calculator is clean, simple, and easy to use. This will generate bullet drop in minutes of angle (MOA) at distances out to 1000 yards, along with wind drift in MOA and inches. The Hornady ballistics calculator also allow you to pre-select for handgun, short-range rifle, match (High Power) rifle, and long-range rifle. This simplifies the data presented, giving you just the ranges you need.
CLICK HERE for Hornady Ballistics Calculator

June 2nd, 2008
Mac Tilton Operates MT Guns, with shops in Southern California and Nevada. MT Guns has one of the most extensive collections of pre-owned target rifles (primarily rimfire), in the world. Mac has been in the firearms business some 55 years, having obtained his first FFL as a teen-ager. In recent years, using the services of expert buying agents in Europe, MT Guns has acquired a huge inventory of premium target guns including hundreds of Anschütz match rifles.
In addition to the Anschütz line, MT Guns has a very large selection of the classic BSA Martinis, including dozens of the desireable MK III match guns. Mac also has a large collection of Walthers, Suhls, Tikkas, Vostoks, Weihrauchs and many other “exotics” from Europe. Being a left-hander himself, Mac maintains an extensive selection of left-handed rifles.


CLICK HERE to WATCH VIDEO about BSA Martini Rifles.
In addition to complete rifles, MT Guns has a large inventory of barrels and a wide selection of “iron” target sights, including rare 19th-century Creedmoor sights. For a fan of precision rimfires and “golden age” rifles, visiting MT Guns shop in Santa Barbara is like striking the mother load. This editor spent four hours with Mac recently and we only saw a small fraction of the inventory.

CLICK HERE for Anschütz and Walther Collection VIDEO.

In addition to selling used target rifles, MT Guns is the USA importer for Barnard Actions. Mac is also a skilled gunsmith and he can build complete rifles on a Barnard or the action of your choice. Mac has built many High Power rifles based on the relatively inexpensive but high-quality Tikka 595 action, often fitted with a Barnard trigger.

June 2nd, 2008
MidSouth Shooters Supply has a new Product Blog that showcases new items and special bargains of the day. One or more featured items are added every day.
We applaud Midsouth for adopting the Blog format to highlight new products and special sale items. This makes it easy for the consumer to check for hot deals with a single click, and Midsouth provides nice, large photos and full descriptions of sale items.
June 1st, 2008
Brownell’s offers over 50 free instructional videos on its website. From the index page, just click the appropriate link and your video of choice will stream in your browser. Alternatively, you can download the videos to your computer hard-drive for later playback.
All videos are narrated by one of Brownell’s gunsmiths or technicians. Complex tasks may be covered in multiple videos. Listed below are some of the recommended videos:
AR15 Bolt Disassembly/Cleaning
How to Fix Light Rust on a Gun
Mounting Rifle Scopes
Measuring Rifle Sight Heights
Remington 700 ADL to BDL Conversion Kits
Prepping Your Firearm For Winter Storage
Prepping a Rifle For Cold-Weather Hunting
Installing 10/22 Barrels
June 1st, 2008

Eric Stecker of Berger Bullets notified us that Berger wants to hire a technical services representative. The candidate must be an experienced rifle reloader who can work on the phone 4-6 hours daily, Monday through Friday. Since the job can be done remotely (at your location), you can pretty much work anywhere in the USA.
Stecker reports: “Berger is growing. Daily we receive requests for technical assistance. We are looking to hire a part time (remote) technical representative. Requirements for this position are more than five years experience as a rifle case reloader. You must be well-versed in reloading for rifle cartridges in calibers for which we make bullets (17 cal through 30 cal for now, soon to include 338 through 50 cal).
You must be able to provide focused attention to those who need assistance. The job requires 4 to 6 hours, each day, Monday through Friday (excluding holidays and vacation). You must be computer literate and comfortable on the phone.
Salary + Free Bullets
It is not a requirement, but being an active, competitive shooter is a plus. This is a part time position which does not include medical benefits. However you’ll receive as many Berger Bullets as you can shoot, along with your pay (to be set based on experience).
It is my sincere hope that this opportunity finds someone who is filled with a genuine love of the shooting sports and who has some time on their hands. Those who are genuinely interested (and available) need to send their resume (shooting and reloading experience focused) to me at eric.stecker [at] bergerbullets.com.”
May 31st, 2008
Summer’s here, and that means hot weather and lots of mirage. A quality mirage shield reduces the amount of optical distortion caused by heat waves rising from the barrel directly in front of the scope. On a hot day, after many rounds through the barrel, the benefit of a mirage shield can be quite dramatic. Benchrest shooters have used mirage shields for many years. Mirage shields can be just as beneficial for the serious varmint shooter. But, curiously, most varminters we know don’t employ mirage shields. We think they should. A mirage shield is a low-cost accessory that helps you get more hits and fewer misses.
As our friend Boyd Allen observed: “Varminters should use mirage shields. Think about it. You’ve invested thousands of dollars in a fancy varmint rifle and quality scope. You may have spent hundreds of dollars traveling to the varmint fields and spent dozens of hours loading up your ammo. Without a mirage shield on your barrel, once that barrel gets hot, you WILL get mirage effects that can make you miss a shot. A mirage shield costs just a few dollars. It really doesn’t make sense to go out to the varmint fields without one, if you plan on shooting lots of rounds. Barrel heat mirage can cause you to miss that critter, even if you have the most accurate rifle in the world.”
Dan Lilja offers a nice, wide mirage shield for $10. Dan notes: “Our benchrest mirage shield also works very well for field varmint rifles if there is a lot of action and the barrel is getting hot. The shield deflects image-distorting heat waves that come off of a hot barrel. The heat flows out past the edge of the shield and out of the line-of-sight of the rifle scope. These shields are 18” long, made of thin painted steel (like window blind material) and can be easily trimmed to length.”

Sinclair International also offers a 2″-wide venetian-blind style Mirage Shade, that costs just $4.25. It is available in two lengths, 18″ for BR barrels (item 06-7200), and 24″ for longer varmint barrels (item 06-7300). The Sinclair Shade is made of aluminum and can easily be trimmed to a shorter length. Like the Lilja shield, the Sinclair Mirage Shade attaches with adhesive-backed Velcro fasteners.

May 31st, 2008
GunsAmerica, in association with Beretta, Mossberg, Remington, and Rock River Arms, has unveiled a new service for potential gun buyers, called “Guns on Demand”. Inventories of thousands of NEW firearms will be available for viewing on GunsAmerica.com. The participating manufacturers’ computerized inventory lists link directly to the GunsAmerica web site, so online shoppers can choose from virtually any gun in these companies’ current inventories.

If you see a firearm you might want to buy, just click the “Full Details” button and a list of FFL dealers (ranked by proximity to you) will display. You’ll see a variety of prices, since each dealer sets his own price. When you select a particular dealer, he will verify that he has the gun (or can get it), and he may ask for a deposit. All stocking brick and mortar gun dealers will be able to enter the program for many brands.
This is a great way for the consumer to compare the prices of dozens of dealers instantly. If you are looking for a current-production factory rifle or shotgun, this can save you time, and you’ll probably end up with a better deal in the end.

The “Guns on Demand” program should benefit both consumers and gun makers. Christopher Merritt, GM of Beretta USA, states: “Where else can we take our entire inventory and in one place show it to our customers? GunsAmerica.com does that and more.” Paul Heslinki, founder of GunsAmerica.com, adds that: “With about 50,000 guns listed and more than 1 million active gun buyers every month on GunsAmerican.com, our Guns On Demand program is a very important resource[.]”
May 30th, 2008
The 6XC cartridge was developed by David Tubb, and it has captured multiple Camp Perry Championships. Now that Norma brass is available, the 6XC is an outstanding choice for shooters looking for an ultra-accurate, easy-recoiling cartridge that offers more “horsepower” than the 6BR or 6BR Improved. Team Norma, shooting factory-loaded 6XC ammo, captured last year’s 300m world championship. This was the first time in many years that a cartridge other than the 6BR has won “all the marbles” in international 300m competition.


Forum members and 6XC shooters Mudcat and German Salazar are both very happy with their choice of chamberings. German tells us:
“The 6XC is a great long-range cartridge, it needs no excuses and can hold its own against any other LR cartridge. I prefer to use Norma 6XC brass, but 22-250 brass can be used by running through a 6XC full-length die and then fire-forming. It will look pretty nasty at first, but it will shoot just fine even fire-forming. I have an article in the May 2007 issue of Precision Shooting that covers this and other 6XC matters.

I principally use the 6XC for 1000-yard prone shooting (sometimes at 600). The main bullet I use is the Berger 115 VLD (in a 30″ Krieger with 1:7.5″ twist). The best powder I’ve found for the Berger 115 in the 6XC is H4831sc. Velocity is in the 3000 fps range. I haven’t pressure tested this combination so I’m reluctant to publish exact loads, sorry.
Whether the 6XC is ideal for any given person depends on a lot of factors. I tend to shoot fast and keep the rifle in my shoulder. Accordingly, a low-recoil cartridge suits me because it doesn’t require any repositioning of the rifle or rebuilding of position during a 22-shot string. I know how to read wind, so whether a cartridge drifts a few inches more or less than another isn’t really a concern to me, I learn the cartridge’s behaviour and work with what I’ve got. The 6XC shines because it is ACCURATE at 1000 yards and without that, you’ve got nothing.
Accuracy, low recoil, reasonable wind drift, good component availability, decent barrel life, what else is there to want in a long-range cartridge?”


Mudcat concurs that the 6XC is a great cartridge for High Power Competition:
“I am not sure there really are ‘downsides’ for the 6XC. Well, maybe barrel life, if you are used to shooting a 223 or 308. I have fired about 15,000 rounds of 6XC over the last couple of years and havent really found a negative. My 6XC barrels get an easy 2,000 rounds. In fact, most get upwards of 3,000 before I move them to strictly off-hand and rapid-fire use. (I am a High Power shooter, not a Benchrester.)
Propellant — Powder choices are excellent. However, contrary to what German has found, I can’t get H4831sc to get me the velocity that the H4350 can. I have found only two powders that deliver more speed than H4350.
Cases — Just use Winchester 22-250 cases as they last 20+ firings and you never have to trim them. I use Winchester 22-250 brass rather than any of the Tubb or Norma offerings — they are just too soft for my liking. With the Winchester, I know what I am dealing with and know I will get at least 20 firings out of it, on average. And, I never have to trim it. While I have a Giraud power trimmer, I would just as soon not do it.
Bullets — Well, 6mm bullets are out there for about anything you want to shoot.
Velocity — The 6XC offers plenty of speed. Is 3000+ fps with a 115 enough for you? I certainly hope so.
Accuracy — I can’t out shoot the 6XC round. About any decent load will work just fine. Shoot, all my 300-yard and less ammo is loaded on a Dillon 650! Overall, I agree with German, the 6XC will definitely hold its own and I am not sure that my 6.5×284 running 142s at 2950 fps actually drifts much less than the 115 VLDs.”
May 30th, 2008
Many of our readers enjoy classic military rifles as well as precision BR rigs and varmint rifles. Now through June 30th, MidwayUSA has Boyd’s M1 Garand replacement stocks on sale for just $89.99, marked down from $104.99 (item 107223). Boyd’s Garand stocks are fully-inletted and crafted from quality American Walnut. Very slight trimming and sanding may be required, but otherwise this is a “drop-in” stock.

There is a superb article by Jamie Magnum on SurplusRifle.com that explains how to install a Boyd’s Walnut stock on your Garand. The author provides complete step-by-step instructions showing how to remove the old stock, and attach the new stock. Through a series of 75 photos, the article covers every aspect of the job, including inletting, and making sure all the metal connectors are attached properly.

CLICK HERE for Downlodable .PDF version of Garand Article.
SurplusRifle.com is an online service of Tennessee Gun Parts, Covington, TN, 1-866-472-4986.
May 30th, 2008
Most of the Tikka 595s that made it to the States came with a synthetic stock or rather ordinary wood stock. Right now, on Auction Arms, there’s a very clean Tikka 595 with a really nice stock in highly-figured walnut with contrasting forearm tip. Chambered in 22-250, it’s a very handsome rifle, and the 595 action is slick and strong. We’re hoping one of our regular readers snags this gem. Current bid price is $625.00. Forum member Fireball tells us the Tikka 595 22-250 magazines will also feed 6BR and 22BR cartridges well if you plan to re-barrel this rifle and chamber a different cartridge. We’d just shoot it “as is”, at least until the barrel wore out.



|