Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









May 12th, 2007

New Barrel? Be Safe–Check Your Headspace!

A friend of ours recently took delivery of a new barrel which was chambered by a smith who had done the original build on the rifle, but who had not headspaced the barrel on the action itself this time. The smith headspaced based on his old records. Our friend happily screwed on his nice, new barrel and headed to the range. After the first few rounds, with known, safe loads, he was seeing deep craters on his primers, and then he even pierced a few primers with loads that should never have done that. Interestingly, the brass was not showing any of the other pressure signs. This was with bullets seated .015″ out of the rifling.

We were thinking maybe too much firing pin extrusion or maybe he got a hot lot of powder. Then I asked him to email me dimensions off his fired cases compared to new, Lapua brass. He emailed me that his shoulder moved 0.0105″ forward. I sent an email back saying, “hey, that must be a typo, you meant 0.0015″ right–so your shoulder moved one and a half thousandths correct?” The answer was “No, the shoulder moved over TEN thousandths forward”. Ahah. This explained some of the cratering problem in his brass. His cases were able to bounce forward enough in the chamber so that the primer material was smearing over the firing pin. And now he has brass that is “semi-improved”.

The point of the story is always check your headspace when you receive a “pre-fit” barrel, even from the smith who built the rifle. Purchase Go/No Go gauges for all your calibers. Headspace is not just an accuracy issue, it can be a safety issue. Pierced primers are bad news. The debris from the primer cup can blow into the firing pin hole or ejector recess causing a myriad of problems.

go no-go field headspace gauges

Permalink Gunsmithing, Tech Tip Post comment »
May 12th, 2007

Egg Shoot in New England on May 27

New Englanders, head up to Woodcock, MA for some fun shooting on May 27th. Roy Bertalotto tells us: “Get them varmint and target rifles out and join us to scramble some eggs at 100, 200 and 300 yds. Savage Arms has donated a 50% off gift certificate for the winner of the 200-yard factory rifle class. Lots of other door prizes to be given away. There are even rimfire class for the youngsters. The range is located in Southeastern Massachusetts, 30 minutes from Cape Cod. One hour south of Boston. Bring the “other half”! A number of women shoot in this event. And there is great outlet shopping within 10-15 minutes plus a Whaling Museum. Click HERE for directions to the Woodcock range.

Want more info?
— Here Roy explains “What the heck is an Egg Shoot“.
— Find your questions answered on the Egg Shoot Q & A Page.

Roy reports: “Rebarreled, custom varmint rifles are quite popular now. But any Savage or Remington 700 / 40X with a fine tuned handload can hold it’s own. Remember, factory barrels shoot against factory barrels, aftermarket barrels against aftermarket barrels. Here are some hints–Bring two guns, or only shoot at one distance. If you shoot 200 yards and tie but then resight your gun for 300 yards you will need to resight for 200 to compete in the sudden death. I’ve seen guys really blow it messing around with those scope turrets.”

Massachusetts Egg Shoot

Permalink Competition Post comment »
May 11th, 2007

NEW Sinclair Light-weight Front Rest

Premium front pedestal rests for “pure” Benchrest competition keep getting bigger and heavier. The Farley Co-Ax, SEB Rest, and John Loh rest are impressively massive. That’s a good thing when you need maximum stability, but varminters and field shooters may be willing to sacrifice a little stability for a handier, more portable front rest.

There are a variety of relatively inexpensive light-weight front rests on the market, such as the Shooters Ridge Steady Point , but frankly, their controls leave much to be desired, and the rest tops tend to be flimsy or wobbly. On this writer’s personal “high-mileage” old-model blue Midway rest, the rest top had to be epoxied to the elevation post to eliminate annoying wobble.

Sinclair Int’l has a new front rest that offers high-quality controls and stout construction in a light-weight (6-pound) format. The components are strong and rust-resistant: machined billet aluminum body, stainless steel mariner handwheel, stainless steel center post, and stainless steel leg screws. The legs are low and straight–this is good when you want to place conventional sandbags on the legs for extra stability. Sandbags lay nice and flat when draped over the legs of the rest.

Sinclair tells us: “We have had numerous requests to produce a high-quality lightweight shooting rest for shooters needing more portability. Varmint shooters, hunters, and F-Class shooters have all been asking for a quality-built lightweight rest. Our latest Sinclair rifle rest weighs under 6 lbs. with top and filled bag. Our larger Sinclair rests weigh over 17 lbs. in comparison. We also had customers asking us for a more economical rest with the same Sinclair quality we put into all of our rests.” The Sinclair lightweight front rest costs $119.00 with basic top, or $147.00 with either multi-purpose top (shown in photo), or RT-3 top (for sporter fore-ends.)

Permalink Gear Review Post comment »
May 11th, 2007

Mother's Day, Sunday May 13th

We know this is a “guys’ site”, but all guys have mothers. Yep, it’s that special day Sunday. Don’t forget to remember Mom (and the mother of your kids). If she likes shooting, then take her to the range. If she doesn’t, well, treat her to a Sunday brunch and be a good sport and take her to her favorite activity even if that means, god forbid, shoe shopping.

If you haven’t bought a special gift yet, here are some quality online vendors all offering special Mothers’ Day promotions. Each one of these outfitters (Cabelas, Orvis, Woolrich, and Herrington Catalog), donates to this site, based on a percentage of sales.

Cabelas Mothers Day 2007 New for Spring from Orvis
120x90 Woolrich Herrington Sale Event (120x90) Animated
Permalink Hot Deals Post comment »
May 10th, 2007

Lapua 6.5×47 Factory Ammo Tests

Robert Whitley provides this report on Lapua’s new factory-loaded 6.5×47 ammunition:

Lapua (through Grafs.com) sent me some 6.5×47 factory ammo to test out. Recently, I’ve tested it for velocity and accuracy in my MAK repeater Tube Gun (with 1:8.5″ Brux barrel). I can affirm this ammo is outstanding.

Chrono Testing:
100 gr BTHP Scenar, 2846 fps, ES 54, SD 21 (Very mild)
108 gr BTHP Scenar, 3020 fps, ES 12, SD 5
123 gr BTHP Scenar, 2903 fps, ES 11, SD 5
139 gr BTHP Scenar, 2780 fps, ES 25, SD 9

The two bullets that I feel are best for the 6.5×47 Lapua are the 108 and the 123 Scenar. They both gave excellent velocity and chrono numbers, as well as excellent accuracy. With the 139s running close to 2800 fps, that’s a lot of velocity for that big of a bullet in that small of a case. The picture below shows the four different loadings. Left to Right, the 100 gr BTHP Scenar, the 108 gr BTHP Scenar, the 123 gr BTHP Scenar, and the 139 gr BTHP Scenar.

Lapua 6.5x47 factory ammunition

Accuracy Testing:
After the chrono testing, I shot one 10-shot test group (prone with sling and scope) using the Lapua 123gr factory ammo. This produced a 10X clean. For factory ammo, it does not get any better than this! At 2903 fps with an ES of 11 and an SD of 5, this is great. When I can shoot a group like that prone with sling, it tells me the gun is shooting better than 0.5 MOA.

Powder Inspection:
I pulled down some rounds for inspection and measuring. Here’s what I found:

100gr Scenar Ammo: OAL 2.728″, 29.3 gr. of powder
139gr Scenar Ammo: OAL 2.728″, 35.8 gr. of powder
123gr Scenar Ammo: OAL 2.725″, 36.1 gr. of powder
108gr Scenar Ammo: OAL 2.719″, 34.2 gr. of powder

I am not sure what powders Lapua is using in the ammo. The powder in the 100gr and 108gr ammo had a finer grain than that used in the 123gr and 139gr ammo. All of the ammo, from 100 to 139 grains, worked well in my chamber, which was cut with the .160″ freebore reamer listed on the 6mmHOT.com website. The 100gr bullets need to jump a fair amount, but the others only jump around .015″.

lapua 6.5x47 Factory ammunition box

Permalink Bullets, Brass, Ammo, Gear Review Post comment »
May 10th, 2007

Ballistol Cleaner/Lube on Sale

MidwayUSA currently has Ballistol Sportsman’s Oil on sale through the end of May. “Oil” is a bit of a misnomer, because Ballistol is a non-toxic, all-natural product that serves a multitude of purposes. It is very popular with black powder shooters because it is not petro-chemical based. Accordingly it will not alter combustion or affect a “seasoned” muzzleloader or black powder cartridge gun, though it cleans black powder residues very effectively.

Centerfire shooters will find that Ballistol does a very good job cleaning powder fouling off case necks and case bodies. As a lube, Ballistol is clear, not waxy or chalky, and it is very slippery. Ballistol is this editor’s preferred lube for full-length sizing PPC and BR cases. It is easy to apply with fingers or a damp patch and it wipes off quickly with a paper towel. All you need is a very thin sheen on the case and your brass will run through the sizer die like a dream. Since Ballistol is non-toxic, you need not be concerned with getting it on your fingers–in fact Ballistol even has antiseptic properties.

ballistol liquid lube cleanerBallistol aerosol lube

The sale item is the large, 16-ounce liquid, MidwayUSA item 164428 (left above). This will last a long time. It is marked down to $7.99 from $9.99, through May 31, 2007. For .223 Rem, 6BR, and PPC case sizing, we prefer the 6-ounce Aerosol version, MidwayUSA item 831231, regularly priced at $6.99 (right above). The Aerosol is easier to apply–a thin mist is all you need. NOTE: for heavy case forming and necking-up duties, we do recommend you employ a thicker lube, such as Imperial Die Wax. For regular neck- and body-sizing of small to medium-sized cases, however, Ballistol works great.

Permalink Hot Deals 1 Comment »
May 9th, 2007

Precision Rifles on ShootingUSA TV

ShootingUSA, the leading shooting sports TV show, will feature a 6-part training series on precision rifle shooting. The Precision Rifle “Pro Tips” series will offer six lessons, delivered in six episodes (one per broadcast). Part One, dedicated to Rifle Fit, debuts tonight, May 9th, on the Outdoor Channel (9pm Eastern time, 6pm Pacific time).

Future episodes will include: Scope Settings, Shooting Positions, Practice Drills, Wind and Mil Dots, and Shooting Moving Targets. The on-camera host for this series is Bill Davison, Master Rifle Instructor for the respected TAC PRO Shooting Center. Bill says his mission is “…in getting you to a point where you can use your weaponry to it’s full advantage, whether it be to shoot prairie dogs, hunt mountain goats, compete in rifle competition, or to serve in Iraq..” Highlights for all 6 Lessons (with text and photos) are available right now on the ShootingUSA.com website. Click this LINK, scroll to the bottom of the page, and hit the “GO” buttons to view text and photos for all six lessons.

Bill Davison:

Permalink - Videos, News Post comment »
May 9th, 2007

6.5-284 for Long Range–Good Article

An excellent article by Robert Whitley on the 6.5-284 Cartridge is now available on the Precision Shooting magazine Website. From the PS home page, click the image for April 2007 (Volume 54 No. 12). If you don’t have Javascript enabled, here is a Direct Link to Robert’s Article.

Robert Whitley 6.5-284 cartridgeRobert’s article covers chambering, bullet selection, load development, and the use of the 6.5-284 in competition. Robert explains how he has tested a variety of long-range cartridge, and he keeps coming back to the 6.5-284 because its combination of accuracy, velocity, and recoil is hard to beat: “In past years, I have had the opportunity to set up and shoot a variety of long range prone rifles. These rifles have predominantly been chambered in cartridges that were 6mm, 6.5mm and 7mm. The cartridges tried included a 6XC, a 243 Winchester, a 6.5 x 284, a straight 284 Winchester, a 7mm Remington SAUM, and more recently, a 7mm/300 WSM. While I still am partial to the 7mms, after shooting all these cartridges … I find myself liking the 6.5 x 284 more than ever. [T]he 6.5 x 284 provides a well balanced combination of all the key factors needed for long range work (accuracy, velocity and down-range bullet performance, all with moderate recoil).”

Permalink - Articles, News Post comment »
May 8th, 2007

Howard Leight Electronic Muffs

Forum Member D. Reever recently acquired a pair of Howard Leight ‘Impact’ noise-cancelling electronic ear muffs. He reports they offer great performance for the price: “I really like these. They take two AAA batteries that are easily accessed through a pop out panel. No struggling like on the Pelitor 6. Off the firing line, while others are shooting, you can easily carry on a conversation while the electronics cancel out the gunfire. Amplification is crisp and clear even at the highest setting. On the firing line, the slim profile of the muffs does not interfere with cheek weld and are comfortable. The 22-decibel rating is a bit low for my liking, but I have found using 29-dba plugs coupled with a slight gain in the electronics allows me to get maximum protection and still hear range commands. In fact, by increasing the volume further I could still hear conversations up and down the firing line. Comfort is definately a plus for all day sessions at the range and these muffs seemed better than average. Comparisons with owners of the Pelitor 6 were more than favorable with many Pelitor 6 owners prefering the Impact muffs over their own.”

howard leight impact electronic ear muff

Howard Leight Impact Muffs have earned rave reviews from Cabelas.com customers: “The Impact Sport is the third electronic muff I have owned and it is the best by far. It delivers a solid mix of protection, comfort and price. I’ve worn Howard Leight ear plugs & muffs at work for years. Now they have really blended that hearing protection expertise with features this shooter was looking for. I have already recommended the Impact Sport to several people.”–Will 1002

Cabelas.com sells the Muffs for $59.99, item IH-228573.

Permalink Gear Review 1 Comment »
May 8th, 2007

First Weekend at Williamsport

Jason Baney, our 1000-yard Editor, offers this report of the first 1000-yard match of the season at the Williamsport Club: “The weather for Williamsport Match 1 this past weekend was gorgeous, but mirage and wind remained to make it tough. From the very beginning mirage was horrendous! Even at 20x magnification it was hard to deal with, and at 42x it looked like we were shooting through water–the target danced around constantly. Wind was fairly light to start, but was increasing from the start. In the group shootoff on Saturday, shooting a borrowed 300WSM with 210 Bergers, I needed a solid 7 MOA to get in the middle of the target. Sunday was even worse with some of the worst results in the club’s 40 year history. Lots of people are already out of the Heavy Gun 10-Match Aggregate unfortunately.” For more info about the Williamsport Club, and for complete match results, log on to www.PA1000yard.com.

John Buhay won the Light Gun shoot-off with his 6mm Dasher. Shooting his 6BR, Jason had small group of the day at 5.851″ (for ten shots), and Diane Hoover had High Score at 97, shooting a 6.5-284. Below is Jason’s excellent target:

Permalink Competition Post comment »