Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 23rd, 2007

Bullet Test Tube Reveals Bullet Performance

The Bullet Test Tube (BTT), an innovative product from Ballistic Technology, allows hunters to test the terminal performance of hunting bullets. This $69.95 unit contains a re-usable wax-like compound that simulates how a bullet penetrates and expands when shot into a game animal. With the BTT, you can measure the wound channel volume (with water), then split the medium in half to measure the wound channel’s length and width. To re-use the BTT, simply melt the core material in a crock-pot or large pan and pour it into a new cardboard tube. Click the screenshot below to watch a QuickTime Video that demonstrates the whole process.

Bullet Test Tube

To learn more about the Bullet Test Tube, read this Product FAQ or this Test Tube Review from Handloader Magazine. The Bullet Test Tube has earned the NRA Publications 2007 Golden Bullseye Award and Field & Stream’s 2006 “Best of the Best” Accessories Award.

Permalink - Videos, Gear Review Post comment »
April 22nd, 2007

Patch-Out from Makers of Wipe-Out

Regular readers of this website will know that we are big fans of Wipe-Out™ from SharpShoot-R™ Precision Products. Wipe-Out™ really works, and can save countless hours of cleaning, plus reduce wear and tear on your barrels. (Click HERE for related article.) The only shortcoming of Wipe-Out™ foam cleaner is that you’ll need to wait an hour or more to get the best cleaning results. This editor’s barrels like two applications of Wipe-Out with four hours total dwell time. Terry Paul, inventor of Wipe-Out™, has come up with a solution for shooters who want the benefits of Wipe-Out™ without the extended wait time.

Paul Patch-Out cleanerTerry’s new Patch-Out™ product is a non-petroleum-based liquid solvent that is effective on carbon and copper fouling. It does the job with just 15-25 minutes of soak time in the barrel. Unlike many other solvents, it does not leave a gummy residue in your barrel, and it doesn’t have to be “neutralized” after use.

Patch-Out™, as the name indicates, is applied with wet cotton patches. You can also use a brush, but you’ll probably find that you’ll get excellent results with only minimal brushing. After applying Patch-Out™, and letting it soak for 15-25 minutes, just use a dry patch. Because Patch-Out™ has a rust inhibitor, you don’t need to follow up with oil. Patch-Out™ is also safe to leave in your barrel overnight, just like Wipe-Out™. There is some evidence that, if you use a non-petroleum-based solvent such as Patch-Out™ and no oil, you can shoot more rounds through your barrel before a stubborn carbon ring will form just ahead of the throat. This is because that carbon ring is actually created, in part, from the “burn-off” of petroleum-based solvents and lubes. Patch-Out™ will be available from major suppliers including Brownells, MidwayUSA, and Midsouth Shooters Supply.

Permalink Gear Review, Tech Tip Post comment »
April 22nd, 2007

Manners Ultra-Light Hunting Stock

Tom Manners Carbon Fiber StockMany readers have asked where they can find a high-quality, extremely light-weight hunting stock suitable for a “walk-around” varminter. One impressive option is Tom Manners’ Carbon Fiber MCS-UL (UltraLight). Weighing just 1.55 pounds, the Manners’ UltraLight is built to Benchrest standards. Despite its minimal weight, the stock is strong and very rigid–because it is basically a seamless shell. The only cuts in the shell are for the action pillars and bolt handle. Both the 1.75″-wide fore-arm and pistol grip area have a molded-in textured surface for better grip.

Tom Manners Carbon Fiber Hunting Stock

The MCS-UL is priced at $495 (before options), and is currently available only with a Rem 700 inlet. This will fit Rem 700 actions or clones such as the Lawton 7000 and Stiller Predator. Available finishes include clear-coat or polyurethane paint in black, gray, or olive. If you want to “show off” that handsome carbon shell, go with the clear-coat. For more details, contact Manners Composite Stocks, (816) 210-8108.

Permalink Gear Review Post comment »
April 21st, 2007

New Norma URP Powder Available

Norma URP powderWe’ve been waiting over a year for the new Norma URP (“Universal Rifle Powder”) to make it to America. This is an extruded powder with a burn rate similar to H4350. URP is available from Powder Valley and Grafs.com, and both companies have plenty in stock. We think this powder may be ideal for use in the 6XC and 6-6.5×47. We suspect it will also work very well for the .284 Winchester. Jason Baney recently received 2 lbs. of URP and he will be doing initial pressure/velocity workups this weekend.

Permalink Reloading 4 Comments »
April 20th, 2007

New CED 'M2' Chronograph

Reader Richard H. just tested his new CED M2 Chronograph, one of the first units in the country. This is an all-new design with many upgrades over the previous CED Millenium model. Clock speed was boosted to 48 mHz, expanding the measurable velocity range to 7,000 fps. Memory storage has been expanded 500%. You can now have up to 500 speed readings per string (and as many as 500 strings). CED claims: “Expanded digital chip design now gives the CED M2 the ability of reading velocities at much lower light levels. On clear days, this means the ability to chronograph from early morning till almost sunset.” If this claim is true, the CED M2 would definitely out-perform rival PACT and Shooting Chrony designs in marginal light conditions.

We’ve found that, with most chronographs, the biggest problems are confusing controls and keypad sequences that are hard to remember. CED has addressed that with the new machine. The $199.00 CED M2 Chronograph features single function string removal (something we wish the Shooting Chrony had), and the M2 offers “one touch” calculation of the average of the three highest velocities in a string. Another major (and much appreciated) improvement is the addition of a USB interface. That offers simple “plug and play” compatibility with laptops and home PCs. USB connectivity will make it much easier to download Chrono data into the updated CED Data Collector software. For more info, contact Competitive Edge Dynamics, CEDHK.com, (610) 366-9752. Right now the CED M2 is back-ordered, but a new shipment is arriving in 2 weeks and M2s should be available by mid-May at Brownells and MidwayUSA.com.

CED M2 Chronograph

Richard tells us: “I’ve been frustrated for a long time with my inability to get my extreme spreads below 30-50 fps and have wondered if my bargain-basement Chrony F-1 might be part of the problem. Well, after I got my Denver Instruments MXX-123 last month, the powder scale was no longer a credible culprit, so I went shopping for a new chrono. This is what I found. Initial results (only three 5-shot groups so far) suggest that ES with the CED M2 is only half of what the Chrony measured. In the Chrony’s defense though, it is surprisely good for something that costs less than half as much (also more convenient and more portable).” If anyone in the Sacramento, CA area has an Oehler Chrono, Richard would like to do a 3-way comparision test with the CED, Oehler, and Shooting Chrony. We’d all be interested in the results. Contact Mailbox@6mmBR.com and we’ll put you in touch with Richard.

Permalink Gear Review, Tech Tip 2 Comments »
April 20th, 2007

Berger 105 VLDs on Sale at MidwayUSA

Berger’s 6mm 105gr VLD bullet has set multiple world records, including Terry Brady’s 0.860″ 600-yard IBS 5-shot record group. Berger has recently acquired new dies for the 105 VLD which should make the bullet more dimensionally consistent than ever before. Be aware, however, that since the new 105s are produced on a new die, the diameter is somewhat smaller and you may have to adjust your load. Through April 30th, MidwayUSA has Berger 105 VLDs on sale, for $19.99 per 100, item 195087. Midway isn’t able to pull specific lot numbers, but 105s made on the new die are Berger lot number 559 or higher.

Berger 105 vld 6mm bulletEric Stecker of Berger Bullets tells us: “We use certified gauges and indicating micrometers to measure the OD. The new die produces bullets that are .2431 to .2432 at the pressure ring and .2430 at a point half way up the bearing surface. A measurement taken on the bearing surface close to the ogive will be .2429. The taper on these bullets is straight which we believe is good as this taper may line things up nicely in the bore.

Here is the important part: They are two things that happen during this type of change: 1. Due to the EDM and polish process no die maker can make the ogive portion of the die exactly the same. This produces a slight change in where the bullet will touch the rifling based on your seater die setting. The change could go either way (in or out). 2. Since the diameter of the bullet is smaller than what the previous die created the portion of the bullet that engages the rifling is moved back.

To make these bullets shoot well, treat them as an entirely new bullet and work up a load adjusting seating depth and neck tension. The nice thing is that once you get this dialed in you will be set for a while as we are dedicating this particular die to making nothing but 105 gr. These bullets are not undersized based on a .2430 groove diameter however they are smaller than previous lots. Dial them in as you would any new item and you will be happy with the results.”

Permalink Bullets, Brass, Ammo, Hot Deals Post comment »
April 19th, 2007

New RCBS Ball Mic at Cabela's

120x60 - No URLRCBS has a new, very affordable Vernier Ball Micrometer. This tool measures accurately to .0001″ and is ideal for determining case neck-wall thickness. Ball diameter is 0.185″. If you turn your case-necks, you’ll need a tool like this to set up your cutter and gauge the consistency of your results. And for those who shoot no-turn brass, a Ball Mic allows you to sort cases by neck-wall thickness. Cabela’s has the best price we’ve found on the RCBS tool–just $41.99. To order, please click on the Cabela’s.com link and type “216307” into the product search field at the top of the page.

RCBS Ball Micrometer Vernier

Permalink Gear Review, Reloading Post comment »
April 19th, 2007

Harts, Kriegers, Shilens at Bruno's

We spoke to Amy at Bruno Shooters Supply today. She confirmed Bruno’s has “hundreds of Hart, Krieger, and Shilen barrels in stock,” including “dozens of 8-twist and 8.5-twist long barrels in Light, Medium, Heavy and Palma contours.” Bruno’s also has a large supply of slow-twist short-range BR barrels. If you don’t want to wait two to four months for a new match barrel, give Bruno’s a call. Right now Shilen barrels are priced to move. All Shilen barrels 1.250″ (or smaller) diameter, 28″ in length or shorter, are sale priced at just $236.40. To order, call Amy toll-free at (800) 455-0350.

Permalink Hot Deals 1 Comment »
April 18th, 2007

$560 Limited Edition Borescope

Hawkeye Limited Edition BorescopeHere’s a great deal on a quality Gradient Lens Corp. Borescope.

Sinclair Int’l offers a special $560.00 Limited Edition Hawkeye model, designed for shooters and gunsmiths. This 17″ borescope, Sinclair item #HS17, includes the same light source, mirror adaptor, and cleaning kit as the regular Hawkeye #HS17FE-K. You don’t get a focusing eyepiece with the Limited Edition but focus is pre-set for 22 through 30-caliber barrels, so that’s not a problem. The same model with focusing eyepiece (item HS17FE-K) costs $775.00 ($660.00 after manufacturer’s rebate*). The Limited Edition Hawkeye is shipped in a padded, cardboard case and can be disassembled in seconds with included Allen wrench. Savings are passed on to shooters with the omission of the focusing eyepiece and hardcase. The more expensive model comes with a deluxe, lockable aluminum hardcase.

*Rebate offer: A rebate of $75.00 is available on the Hawkeye 17 Borescope Kit (HS17FE-K ONLY). Mail your Sinclair International Invoice directly to Gradient Lens before July 1, 2007. Rebate valid for United States customers ONLY. NO REBATE on Limited Edition.

Permalink Hot Deals, Optics Post comment »
April 18th, 2007

CH4D Offers Titanium Nitride Custom Dies

CH4D custom Titanitum Nitride dieNeed a custom full-length sizing die? Want something very special that will be gentle on your brass, reduce sizing effort, not rust, and never wear out? Tool-maker CH Tool & Die, CH4D.com, offers custom sizing dies, with optional Titanitum Nitride (TiN) coatings inside and out. Internal die dimensions can be set from fired brass you supply, a chamber cast, or specifications you provide (which could be based on a reamer print, with the dimensions tightened up slightly). Cost for a custom sizer die is $73-$110, depending on chambering (common calibers cost less). TiN coating is $36.50 for the die body, $10.80 for the expander ball. CH4D custom FL dies are conventional full-length sizers without bushings. If you need to vary the neck tension, have the die spec’d for “normal” tension and then use a separate bushing neck-sizer when you need more tension. Normal turn-around time for a CH4D custom die is 10-12 weeks; TiN coating can add 2-3 weeks to that.

CH4D’s Dave Davison explains: “Titanium Nitride coatings have been used in industry for many years, primarily to extend the life of carbide tools. It has not been useful in reloading until recent advances in technology permitted TiN coating a die without softening the steel of the die itself. A TiN coated sizer in 308 Win showed no measurable wear after sizing 50,000 rounds. Although Titanium Nitride is harder than carbide and has a lower coefficient of friction it does not eliminate the need for lubricant when full-length sizing cases. It does reduce sizing effort considerably and minimizes the lubricant required. TiN-coated dies will live longer and require less force to operate than any die available. If you ever manage to wear out your TiN coated die, we will replace it at no charge. All we ask is that you tell us how many rounds you’ve loaded with it.”

CH4D can coat other manufacturers’ dies with Titanium Nitride. However, CH4D cautions: “TiN coating other manufacturers’ dies can be done, and is usually successful. However we have no control over the material or heat treatment of these dies and cannot guarantee the results.”

Permalink News Post comment »