The Tactical Rifle Shooters Facebook Group recently showcased tools used to measure case headspace before and after “bumping” the shoulder. After a case is fired, hand-loaders who full-length size their cases will typically bump the shoulders back anywhere from .001″ to .0035″, depending on the rifle and application. With our 6mmBR and Dasher cases we like about .0015″ bump.
You want the amount of case sizing and bump to be the same for all your brass. To ensure uniformity, it makes sense to measure your cases before and after the FL sizing process. When we have time, we check every case. Other folks will simply check the first 3-4 cases coming out of the FL sizing die to ensure the FL die setting is correct and delivering desired headspace/bump.
1. Whidden Gunworks Shoulder Bump Gauge
There are a variety of tools that can be used to measure shoulder bump. Our favorite is a special cartridge-specific bushing made by Whidden Gunworks. The Whidden Shoulder Bump Gauge enables you to adjust your sizing die to the desired measurement. The bump gauge is attached to your calipers with a set screw and determines the measurement from the base to the shoulder of the case. The photo below, from Tactical Rifle Shooters, shows the Whidden Bump Gauge for the .375 CheyTac cartridge.
2. Dave Manson Vertical Comparator with Dial Read-Out
Dave Manson states: “This tool was designed to make life easier for the advanced shooter and re-loader by allowing precise measurement of ammunition, case, and chamber headspace. With this information, the re-loader will be able to fine-tune clearances and fits between his ammunition and chamber, with resultant improvements in accuracy and case life.” The functions of the Manson Comparator are:
1. Measure headspace of factory or reloaded ammunition
2. Quantify chamber headspace by measuring headspace of a fired case
3. Ensure minimal shoulder set-back when setting up re-loading dies
4. Compare base-to-ogive length to ensure consistent bullet-to-rifling relationship.
In addition to the Dial Indicator and Stand, the $130.00 Vertical Comparator is supplied with multiple Datum Blocks of precise length and inside diameter (.3300″/.3750″/.4000″/.4375″). MORE INFO HERE — Catalog page 20.
3. Hornady L-N-L Headspace Comparator System
Hornady’s Lock-N-Load Headspace Comparator system is easy-to-use and handy. You can get a kit with Red bushing-holder body and 5 bushings for $40.12. Hornady explains: “The Lock-N-Load® Headspace Comparator… gauge measures variations in brass before and after firing or re-sizing. It allows for headspace comparison between fire-formed brass and re-sized brass.” IMPORTANT: Hornady states: “To determine the proper bushing diameter for your cartridge, simply add the neck diameter and the shoulder diameter and divide that number by two. Use the bushing closest to that number.” Hornady offers five: .330″, .350″, .375″, .400″, and .420″.
One tip — We have found the Hornady gauges may vary a little from unit to unit even with the same nominal size. If you have more than one gauge for the same cartridge, test each on your brass — you may then note a slight difference in your bump measurements. There is also an Anvil Base Kit that mounts to the opposite blade on the caliper. This provides a more stable surface for the base of your case.
4. L.E. Wilson Case Gage Depth Micrometer
If you are looking for precise “bump” measurements without having to mess with calipers and clamp-on gauge blocks, you may want to consider the L.E. Wilson Case Gage Depth Micrometer. This takes very precise, repeatable measurements, but you need to know your starting point. The manufacturer explains: “Every reloader should know exactly how much your Full Length Sizing Die is pushing back the shoulder. With the NEW Case Gage Depth Micrometer you can do just that! It has never been easier to measure you cases headspace before and after sizing. The Depth Mic allows you to slip the micrometer perfectly over the top of the Gage with your case inserted into the Gage and take a measurement. Micrometer has graduations of .001″. The Case Gage Depth Micrometer is set to a zero of .100″ on the scale at our factory. Because of differences in ‘feel’ and temperature, we include a the Gage Block for you to test Zero and to adjust if necessary.”
5. Pistol Brass Case DIY Bump Gauge
Last is a “field expedient” set-up if you do not have any of the comparator tools shown above. A sized .45 ACP case (or other suitable pistol case) can be used to measure shoulder bump. The mouth of the pistol case sits on the shoulder of your rifle cartridge brass.
Make sure the .45 ACP case is trimmed square and that it is round. We recommend you first run it through an expander, then size it, trim it and chamfer. Next, take the .45 ACP case and slip it over the neck of a fired, unsized rifle case with the primer removed. Align the two cases between the jaws of your calipers and note the length from rim to rim (See left photo below).
OK, now you have the length for a fired rifle case BEFORE sizing. Next, take a full-length sized rifle case (without primer) and do the same thing, placing the .45 ACP case over the neck of the FL-sized case (Right Photo). The difference between the two numbers is the amount of “bump” or set-back you are applying to the shoulder. Here the difference is .0015″. The amount of bump you need varies with your chamber and your load, but .0015-.002″ is a good initial setting.
Good news for folks in the middle of the country — Vortex, the optics-maker, has built a very impressive new training facility in Wisconsin. This new 55,000 square-foot Vortex EDGE facility boasts indoor and outdoor ranges, with shooting outdoors to 1000 yards. The modern EDGE 100-yard range is one of only a few 100-yard indoor ranges in the country, and the only one in the Midwest. The impressive new Vortex EDGE training center is part of the Vortex campus located in Barneveld, Wisconsin. The EDGE buildings are “just across the parking lot from the Vortex HQ” in Barneveld.
Vortex has just released a video “sneak preview” showing the new EDGE facility, with the multiple indoor ranges, “shoot rooms”, and simulator training center. Check it out below:
VIDEO – Behind the Scenes of Vortex EDGE – First Look!
Vortex posted: “If you can’t travel to our campus, you can still experience Vortex EDGE. We’ll be regularly releasing videos and content, and we’ll be active on social media celebrating all things firearms training.”
The 100-yard Indoor Range is ideal for load development and accuracy testing. Three-time F-TR National Champion Ian Klemm, who works for Vortex, told us: “If someone asked me to describe my dream job, I’d probably depict some magical place where I could do serious 100-yard indoor load development and rifle tuning whenever I wanted. Well, for the last three years while the Vortex EDGE facility was being completed, that’s exactly what it’s been like and we’re all excited to finally be able to share it with the rest of the Vortex Nation. I’m extremely grateful to work for the kind of company that would want to build this facility in order to share it with our customers. Come visit us and I bet you’ll at least leave with the best ‘no wind zero’ you’ve ever had on your rifle!”
There is a 1000-yard outdoor range, plus multiple indoor facilities including a 100-yard range, 50-yard indoor “tactical” range, 25-yard tactical range, a LEO/Military “Shoot House”, and even a simulator room with VirTra 300® interactive video.
Along with the training areas, the EDGE center includes a classroom, cleaning/locker area, and a commercial showroom. Go to VortexEdge.com to learn more about the facility and class offerings. On that website, you’ll also find EDGE Instructor Bios.
If you have been waiting to purchase a chronograph… now is a great time to buy. You can get the affordable MagnetoSpeed Sporter for under $180.00 from Brownells. You can set up this device in a few minutes, and you never have to go downrange to fiddle with a tripod or fuss with wires. The MagnetoSpeed Sporter is simple and effective — a no-hassle solution. Be aware, however, that the placement of the Sporter Chrono ON the barrel can affect barrel harmonics. Therefore you should do your final load testing without the Sporter attached.
See MagnetoSpeed Sporter Chronograph Features Reviewed in Video
We’re impressed by the Sporter chrono, as are other shooters — this unit is very popular. Like the MagnetoSpeed V3, the Sporter faithfully records shots, even in complete darkness. Shot strings are recorded digitally and can be transferred to a smart phone via MagnetoSpeed’s XFR accessory (and Apps).
The Magnetospeed Sporter offers most of the features of the more expensive models (see chart below for details) and has a updated sensor. MagnetoSpeed says the Sporter is “Ideal for contoured rifle barrels (sporter barrels) and long-barreled revolvers.” The Sporter Chronograph Kit (shown above) includes: Bayonet Sensor, 3.5 foot Data Cable, Remote Display (with Battery), Strap with thumb nut, Two V-block spacers, and compact storage box.
Q: Will the Sporter Chrono work with thicker barrel (i.e. greater than 1″ diameter)?
A: The manufacturer recommends the $399.00 V3 model for thicker barrels. But, wink-wink, if you have a 1.25″ barrel you can get this to work, based on what we’ve seen. If you have a really fat barrel (up to 2.0″ diameter), get the V3. Magnetospeed also says the V3 is needed for airguns, shotguns, and muzzleloaders.
Click Image for Full-Screen Photo
The Sporter Chrono attaches quickly and easily. It has a 3.5-foot-long cord, and will work with Muzzle Brakes and Flash-hiders up to 2.7″ long.
by Sierra Bullets Ballistic Technician Philip Mahin for Sierra Bullets Blog
A lot of calls that come into the Sierra Customer Service Center are made by shooters [of retirement age]. Most of the time the shooter used to reload back when they were [younger] and stopped in order to raise a family, pursue a career, or both. Maybe their father or grandfather taught them back in the day and they are looking for an answer to the new whatchamacallit they found on the internet. The point is they are coming back to it because it was fun.
Reloading Can Provide Stress Relief
As a father of three, a husband, a brother, a son and son-in-law, and a friend and neighbor, I get pulled in a lot of directions. In all honesty, reloading and shooting has become a stress relief for me even though I work in the shooting industry.
Sometimes, the shooting gets put on hold for other more important things but there will always be another project or repair to accomplish. There are a lot out there that have found a way to balance the work life, the family life, and the play life. I would like to applaud you on your efforts because it is a hard thing to accomplish.
Remember to take time and relieve that stress. Do something fun, especially if it is shooting that special hand-load you just made.
AccurateShooter Comment — Hand-Loading and the Creative Process
Reloading your own precise ammo can be rewarding in many ways. First it allows you a temporary escape from work pressures, “Honey-Dos”, filing your taxes — whatever. It’s just you and Mr. Rockchucker spending quality time in the loading room. Second, hand-loading is a creative process that engages the mind. During load development, you are like an inventor, selecting a powder charge, choosing the bushing size, experimenting with seating depths, working to perfect your load.
Lastly, the process of hand-loading is rewarding because you are building something start to finish. You begin with components — bullets, brass, and powder, and end up with a finished product that (hopefully) is better than the best factory ammo you could buy. It is enormously satisfying to start with piles of bullets and brass and end up with beautiful hand-loads that can deliver great accuracy.
In recent months, Forster Co-Ax® presses have been somewhat hard to find, as demand has out-stripped supply. But they are still worth looking for. The Co-Ax Single Stage Press accepts any standard 7/8″ X 14 reloading die, but Forster suggests using Forster Cross Bolt Lock Rings for best results. As the Co-Ax is currently back-ordered at most vendors, but you can try multiple sources.
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video embedded below. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market.
Video Shows Special Features of Forster Co-Ax Reloading Press
Forster Co-Ax Press Video Review
This is a very thorough review of the Forster Co-Ax done by Rex Roach. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
The Co-Ax case-holder features spring-loaded, floating jaws. These jaws have two sets of openings, small and large. This allows the system to adapt to various rim diameters. The jaw plates can simply be reversed to switch from small jaw to large jaw. In the photo above, the Co-Ax is configured with the large jaw openings in the center.
The U.S. Army Marksmanship Unit (USAMU), in cooperation with Shooting USA TV, has created a series of instructional Pro Tip pages covering a wide range of shooting disciplines. All totaled, there are more than 50 USAMU Pro Tips. Most relate to rifle marksmanship but there are also numerous tips for shotgunners and pistol shooters. Each Pro Tip entry includes multiple photos and 6-15 paragraphs, in an easy-to-follow format. Many Pro Tips also include an instructional video produced by Shooting USA. Here are three Pro Tip videos, and links to seven more Pro Tip web pages.
USAMU TOP TEN PRO TIPS
1. Reading the Wind with SGT Sherri Gallagher.
Apart from gravity, wind has the most pull on the bullet as it travels down range. Being able to accurately read the wind and mirage will greatly enhance your performance on the rifle range. National Champion, SGT Gallagher gives you some of her tips.
2. Angle Shooting with SFC (Ret.) Emil Praslick.
SFC Praslick shows you how to determine the angle to your target, and then how to include that to change your data necessary to hit your target on the first shot.
3. Rifle Grip, Stance and Body Position for 3-Gun with SFC Daniel Horner.
Professional 3-gun marksman SFC Daniel Horner, U.S. Army Marksmanship Unit (USAMU), give tips on how to properly handle a semi-automatic rifle, including grip, stance and body position.
We have always liked Tikka actions, and now there is a great re-barreling option for Tikka T3 owners. Criterion Barrels Inc. (CBI), makers of “pre-fit” barrels for Savage, Remington, and Rem-clone actions, also produces Tikka pre-fits. These pre-chambered barrels for Tikka T3 actions will be headspaced with a barrel nut, just like a Savage.
Click image for full-screen version
Criterion’s Tikka T3 pre-fit barrels are currently sold through Solid Accuracy, a respected Texas-based outfit that sells high-end scopes, stocks, barrels and other rifle components. Solid Accuracy states: “Each Solid Accuracy/Criterion pre-fit barrel features a hand-lapped bore and meets extreme quality control standards. Utilizing a proven barrel nut design, these barrels can be swapped in just a few minutes using only a barrel nut wrench and the appropriate headspace gauge set. Solid Accuracy offers finished lengths up to 30″ with multiple contour options.”
These Tikka pre-fits were first introduced in 2017, and the accuracy results were impressive. Solid Accuracy’s initial test rifle featured a Tikka T3 action mounted in a KRG X-Ray chassis, with Criterion barrel chambered in 6.5 Creedmoor. The group below was shot with a stout load of H4350 and Sierra 140 grain MatchKings seated .009″ in the lands.
Criterion is proud of how well the Tikka pre-fit project turned out. These barrels work great in the Tikka platform. One of Criterion’s staffers was so impressed with the initial test results that he is built his own Tikka T3 rifle, with a Criterion pre-fit of course…
If you plan to travel across state lines with your guns, this book can really help. With over 100 changes from last year, the 2021 edition of Traveler’s Guide to the Firearm Laws of the Fifty States is a must-read for anyone planning to travel around the country with firearms. In addition, the book also covers the firearms travel laws for Canada and Mexico.
For $14.95 you can purchase a state-by-state Traveler’s Guide to firearms laws. This book can help ensure you comply with all state laws during your trip. Highways Magazine states: “If you carry a weapon in your rig, you need this book.” This 68-page guide covers all firearms types and all 50 states. It even has info for Canada and Mexico.
This 25th edition of the Traveler’s Guide covers important topics such as carry of firearms in a motor vehicle, concealed carry reciprocity, which states preempt local gun regulation, tips on handling a traffic stop, concealed carry in state and National Parks, vehicle carry and possession on college campuses and much more. Best of all, the text is in plain, easy-to-read English.
Written and researched by J. Scott Kappas, an attorney and Class III Firearms Dealer, the 2021 Traveler’s Guide has a preface that defines many key terms important for anyone traveling with a firearm across state lines. The latest edition also has new formatting for easier reading.
Purchase from GunLawGuide.com for $14.95 + $4.00 shipping, or get it on Amazon for $16.40 with free shipping. The Traveler’s Guide to the Firearm Laws of the Fifty States has sold more than 1,000,000 copies since it was first released in 1996.
The Traveler’s Guide is especially useful for shooters traveling in RVs and motorhomes. The American Rifleman Magazine declared: “This book is a must-have for truck drivers, motor home enthusiasts, campers and other travelers…easy to read and understand, well-organized and concise….” One reader from Texas adds: “I used to think that my RV was the same as my home when it came to gun carry….the Traveler’s Guide set me straight. Now I know my motorhome is subject to the same laws as any vehicle when it comes to guns.”
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA — Crimson Trace 5-Series Tactical Scope Sale
⏺ Very good value — superb FFP optics for PRS/NRL applications
Here are great deals on high-quality First Focal Plane MilRad optics, ideal for PRS/NRL tactical applications. These high-tech Crimson Trace scopes are HALF OFF now. Grab the 3-24x56mm for $889.50 (50% OFF) or the 3-18x50mm for $799.48 (49% OFF). Both feature 34mm main tubes, tons of elevation, and advanced MR1-MIL Advanced illuminated reticles. We’ve looked through these optics and they have good glass and nice controls. These scopes feature EZ Mount Leveling Indicators for quick, precise mounting. All Crimson Trace scopes come with FREE Batteries For Life and a Lifetime Protection Warranty.
This year the Pacific NW and Texas were hit with major, once-in-50-year ice storms that caused massive power outages. (In fact the Editor’s brother was without power for 9 straight days in Oregon.) If keeping the lights on, being able to charge devices, and staying warm is important to you then you NEED a generator. Check out the WEN 56380i 3800-Watt RV-Ready Portable Inverter Generator with fuel shut-Off and electric start. Assembled in the USA, WEN generators boast critical shut-off features to prevent damage, along with important fuel/load gauges. Order one before the next storm catches you off-guard.
3. Creedmoor Sports — Lapua Cartridge Brass In Stock
⏺ Get top-quality Lapua brass now without back-orders
Quality reloading components continue to be tough to find, especially for popular calibers. But if you need cases, visit Creedmoor Sport for premium Lapua Rifle Brass . Creedmoor Sports currently has a very wide selection of cartridge types in stock and ready to ship. As of 3/1/2021, you’ll find Lapua brass in the popular .223 Rem, 6mmBR, 6mm Creedmoor, 6.5 Creedmoor, 6.5×284, .260 Rem, .308 Win and more, at reasonable prices.
4. Midsouth — Lock-N-Load Case Prep Duo, $54.14
⏺ Very handy, versatile unit performs multiple tasks
This Hornady Lock-N-Load Case Prep Duo lets you accomplish case deburring, chamfering, and primer pocket cleaning all with one affordable power tool. This cordless unit features has a unique twin spindle head that runs the deburrer and chamferer at the same time — that’s handy. And HERE’s a big bonus — you can take off the dual head, swivel the grip, and convert the tool into a handy single-shaft driver you can use for multiple tasks, such as running the 21st Century neck lathe. Check out this review that showcases everything this versatile Hornady Tool can do.
5. EuroOptic — Vortex Spitfire HD Scope Sale, Save up to $200
⏺ Great choice for action shooting and defense rifles — fast reticle design
Wish you could have the best of a red dot scope and a magnified optic all in one? Take a look at the Vortex Spitfire HD Red Prism Scopes. These quality scopes feature 3X or 5X magnification, and illuminated reticles with hold-overs. The clutter-free reticle allows FAST target acquisition, making these great for both 3-Gun games and defensive use. And the night illumination is great for hunting use. The 5X model is discounted $200 from $649.99 to $499.00, while the 3X model is $150 off, discounted from $599.99 to $349.99.
NOTE: If you want the widest field of view with no magnification (for short-range disciplines), Vortex also offers the 1X-AR Prism scope for $249.99, $100 off.
6. Sportsmans Warehouse — Savage B22 FV-SR 22LR, $319.99
⏺ Patriotic Stars and Stripes version — nice features for the price
Looking for an accurate .22 LR bolt-action rifle at a good price? Check out the Savage B22 FV-SR 22LR Special Edition a Sportsman’s Warehouse exclusive. The B22 FV-SR has an ergonomically-designed stock, with a high comb more vertical grip. This allows shooters to hold the rifle in a more natural position that puts less pressure on the wrist. The B22 FV-SR features a heavy-contour, suppressor-ready barrel, Picatinny scope rail, and adjustable AccuTrigger.
⏺ Affordable padded mat rolls up for easy transport
Being comfortable when shooting prone is really important for good results. So you’ll want a good mat that offers some padding along with plenty of room for your gear. If you need an inexpensive mat that checks all the boxes, check out the Redneck Convent Shooters Mat Padded Roll Up Mat . Measuring 64 inches by 21 inches it boasts plenty of room and features 1/2″ padding top to bottom. This mat rolls up for easy storage/transport (Rolled size is 21″x8″) with handy built-in rolling straps. This is also available in Black for $31.99 or Green for $39.99.
8. Amazon — Twod Front and Rear Sandbag Set, $12.99
⏺ Very low cost bag set for basic rifle or pistol support
Do you need a simple sandbag support for hunting or sighting-in rifles? Or perhaps you want to try NRL22 but don’t way to spend much on fancy bags. This Twod Shooting Rest Combo offers front and rear bags for just $12.99. These user-fillable bags are made from heavy material. The guns rest on a soft leather top section. There is also a Camo Version of this Twod twin-bag set for $14.99 on Amazon.
⏺ Decent lens, nice molded exterior, weighs just 2.9 ounces
If you want a simple, lightweight easy-to-carry optic, you may want to consider a monocular. This unit will fit in a coat pocket and is very inexpensive. With its compact form factor, 10X magnification, and durable coating, the Roxant Viper 10x25mm Pocket Scope offers good function for the $22.95 price. With minimal 2.9 oz. carry weight and a compact size, this can be a very handy optic for hunters and hikers. This 10X scope has 65% 5-star and 15% 4-star purchaser ratings. However, a few buyers experienced problems with a cloudy lens. If you purchase, inspect the unit carefully during the eligible return period.
While this site focuses primarily on accurate rifles, we know that most of our readers also own pistols (and many shoot them competitively). After rimfire pistols, probably the most popular handguns in America are 9mm semi-auto pistols. Here are five products we use with our favorite 9mm semi-autos — H&K P7M8 and SIG Sauer P226. You’ll find a great carry case, high-quality electronic muffs, a pistol “range station”, affordable 9mm ammo, and two cool training targets.
1. Mantis Systems — X2 for Dry-Fire, $99.99
Built for dry-fire use only, the Mantis X2 ($99.99) provides real-time, shot-by-shot feedback for both pistol and rifle users. You can track multiple training sessions with data-driven insights, and monitor your progress. This unit has earned high user reviews such as: “As a new gun owner the Mantis X is a game changer for me. I have not been able to get to the range during the lockdowns and being able to practice at home [is great].” And another: “Easy to install[.] The App is free and easy to use.”
The Mantis X2 is a good value. The manufacturer states: “There is nothing at this price point that will give you this level of feedback for dry fire.” There are actually four Mantis models: X2 ($99.99), X3 ($169.99), X7 Shotgun ($199.99) and X10 Elite ($249.99). The X3 adds live fire functionality. MORE INFO HERE.
2. CaseCruzer Handgun Cases
A California company, CaseCruzer, makes the nicest multi-pistol hard cases we’ve ever seen. With capacities from 3 pistols to 6 pistols, these lockable range cases hold handguns securely in angled “quick-draw” slots. In addition to the molded pistol carriers, there are slots for magazines together with a separate compartment for muffs, ammo, and other accessories. Starting at $240.00 MSRP for the Quick Draw 3-Pack, these boxes are expensive, but they offer great protection with great usability. Water-tight and dust-proof, CaseCruzer cases are airline approved (ATA 300).Now that you’ve spent thousands of dollars on the new benchrest, PRS, ELR, or hunting rifle (and thousands more on optics), how are you going to get it to the range or hunting grounds? It’s important to transport your valuable firearms in very high quality gun cases. Good padded soft cases can work, but for long-distance hauling (and all air transport), we recommend hard cases with quality foam inside.
3. Impact Pro Electronic Muffs 30 dB Noise Reduction Rating
When shooting pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with good foam plugs underneath. That gives you serious hearing protection during live fire, with the ability to hear voices and converse.
For pistol shooting, we like the latest Howard Leight Impact Pro Muffs. These offer an impressive 30 dB Noise Reduction Rating (NRR), an exceptional NRR. In addition, these muffs are pretty comfortable and offer Headphone Functionality so you can connect to your smartphone, MP3 player, or other device. These quality muffs are currently $62.23 on Amazon.com.
4. MTM AC4C Ammo Crate with 4 Ammo Boxes
The versatile MTM AC4C Ammo Carrier features four lockable polymer ammo cans in a fitted, four-slot 23.5″ x 11.3″ x 7.5″ carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well-built and great design — a steal at the price.” This popular product is available now at Midsouth for $32.66. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV.
5. High Contrast Pistol Training Targets
Here are two of our favorite pistol targets. The Splatterburst 12″ x 12″ sight-in target works great for handguns in indoor ranges. Bullet holes appear as bright neon yellow halos. And the contrasting grid lines let you quickly estimate your group size. Each target has five diamonds, and the top of each diamond provides a precise aim point for your front sight. The 12″ Bullseye Pistol Diagnostic Target diagnoses common problems based on shot impact zones. While this target is designed for righties, left-handed shooters can use the target too. Just observe the opposite tips.
Written and researched by J. Scott Kappas, an attorney and Class III Firearms Dealer, the 2021 Traveler’s Guide has a preface that defines many key terms important for anyone traveling with a firearm across state lines. The latest edition also has new formatting for easier reading. 
Wish you could have the best of a red dot scope and a magnified optic all in one? Take a look at the 
Do you need a simple sandbag support for hunting or sighting-in rifles? Or perhaps you want to try NRL22 but don’t way to spend much on fancy bags. This 
When shooting pistols indoors we recommend quality muffs with earplugs underneath, offering double protection. When inside an enclosed range, with other shooters blasting away right next to you, you really need effective hearing protection. But you also need to hear range commands and be able to communicate with your fellow shooters. That’s why we recommend electronic muffs with good foam plugs underneath. That gives you serious hearing protection during live fire, with the ability to hear voices and converse.
