Along with these popular cartridge types, DJ’s Brass can hydro-form 6 PPC, 30 PPC, 6 BRA, 30 BR, .260 AI, .284 Shehane and other wildcats.
Do you shoot a popular wildcat (such as the 6 BRA), but hate the hassle of fire-forming all your own cartridge brass? That takes time, costs money (in bullets and powder), and consumes precious barrel life. Well there IS a better solution — you can have your new brass hydro-formed to your exact specifications for a reasonable cost.
DJ’s Brass Service now offers custom case hydro-forming to your exact specs. Darrell Jones offers this service for a variety of popular cartridges: 6 PPC, 30 PPC, 30 BR, 6 BRA (BR Ackley), 6mm Grinch, 6 BRDX, 6 BRX, .260 Ackley, .284 Shehane and of course the very popular 6mm Dasher. After hydro-forming your brass, Darrell can also neck-up or neck-down the cases to meet your needs. For example, if you shoot a 22 Dasher, Darrell can hydro-form the cases to a 6 Dasher and then neck them down to .22 caliber. He can also turn the necks to your specs (for an additional charge).
Darrell is a hydro-forming wizard who has perfected the process over the last couple of years. He has learned a few special techniques along the way to ensure uniform case-forming.
Without revealing any trade secrets, we can say the Darrell has very special dies and Darrell doesn’t use a mallet or hammer — he has a system that is much more consistent. Darrell tells us: “Many of my customers take this brass and load it ‘as is’ and go straight to a match and shoot some very nice groups.”
Hydro-forming by Darrell costs $0.60 (sixty cents) per case with a minimum order of $60. Neck-turning is an additional $0.50 (fifty cents) per case plus actual return shipping. The turnaround is usually less than five days.
With Darrell’s hydro-forming service you don’t have to buy any special dies or other equipment. Darrell says: “Simply send me the brass you need or have it dropped-shipped to me along with a fired case that has not been sized. If you need formed brass for a new build (gun not yet fired), let me know and I will size the brass to fit within .001 of a PT&G GO gauge.”
For more information, visit DJsBrass.com, or call Darrell at (205) 461-4680. IMPORTANT: Contact Darrell for shipping instructions BEFORE sending brass for processing. In a hurry, don’t have time? Just call Darrell and he’ll make something work for you.
Hydro-Forming Customer Reports
Here are testimonials from recent customers.
“Recently had Darrell Jones of DJ’s Brass Service hydro-form 6 BRX brass for me. The turn around time was very fast and the brass was to the exact specification I ask for. I actually shot the hydro-formed brass in a match [without further fire-forming]. It shot a 3.597″ — pretty amazing. Let DJ do the work for you!” — Mike Wilson (3 Time IBS Record Holder; 2013 and 2014 1000-yard IBS Shooter of the Year.)
“Darrell Jones of DJ’s Brass Service went far beyond the call of duty, to assist me in preparation to shoot for my first time in an IBS match. I have had an interest in 1000-yard competition for many years and finally got the opportunity to try it. After researching the winning competitors, rifles, and rounds I ordered a Panda action with Krieger barrel in 6mm Dasher from Kelby’s. It was one week before the match and I had a rifle and no rounds. I contacted Darrell to hydraulically form 6mm dasher from Lapua 6mm BR brass. He formed the brass and had it in the mail the next day[.] Since I have only reloaded for hunting or magazine fed rifles I was not familiar with proper seating to allow land engagement of the bullets for 1000-yard accuracy. Darrell took the time to advised me every step of the way to allow me to shoot a 3.158″ (5) shot group to win my first round of my first competitive match ever.” — Mike Youngblood
Share the post "Hydro-Forming Cases by the Experts — DJ’s Brass"
If you’ve never been to a benchrest match, visit the IBS website to find an affiliated club in your area. You’ll find schedules for upcoming events where you can learn about the sport.
This article describes an impressive complete benchrest rifle that will be awarded next month to an IBS competitor in the IBS Southeastern Region. This premium benchrest rig was a collaborative effort, with components and build labor donated by many companies. The rifle and scope prize will be awarded at a Banquet on November 10, 2018. The winner will be chosen from shooters who have accumulated “tickets” (essentially prize credits) over the course of the year. Tickets are earned through match attendance and shooting performance: 1 ticket for each match attended in the SE region ranges listed above (AFTER attending five matches). Shooters get additional tickets for a perfect 2,500 score, plus 10 additional tickets for attending at least one match at each and every participating range.
A Magnificent Prize by Boyd Allen, IBS Vice President
Coming up with prizes for shooting events is always a challenge, and results can vary considerably from match to match. This rifle is at the apex of the prize pyramid. Few complete rifles are seen on prize tables, because of their cost, and because they are generally built to order from select components, produced by multiple manufacturers. There are no off-the-shelf benchrest rifles, and if there were, the price of one, complete with a quality scope, would be too great to ask of a single source, given the size of the typical businesses that serve this sport.
Any score shooter would be glad to have this rifle and feel quite fortunate to win it. It is a fine example of its type, made of top components, and stocked with a “Indian Blanket” pattern Obeche laminate that will not be seen again once the supply runs out, because the factory that produced it burned down. As you would expect for this type of competition, it is chambered for the 30 BR.
This prize rifle was built to increase interest and participation in centerfire score shooting in the Southeast Region of the International Benchrest Shooters (IBS), as well as to encourage competitors to visit more ranges and attend more IBS matches. Ranges participating in this prize campaign are:
Good luck to everyone for the remainder of the 2018 season. NOTE: There are more detailed rules than we can reproduce here (for space reasons). If you intend on taking a serious run at this prize, take the time to inquire about all of the specifics.
Left to Right: Jim Cline, Doyle Anglin, and Ronnie Milford.
Background of the IBS Rifle Prize
Ronnie Milford explained: “Near the completion of the Southeastern Regional, I [asked] some of our fellow shooters about increasing participation. One of them suggested that we have one big prize that would be participation-based. I ran the idea of building a complete rifle by my personal gunsmith Doyle Anglin. He warned me that he had seen others try to do the same thing, and that it would be hard to get people to donate products. That lit a fire. First phone call was to Jim Kelbly who offered to donate the action. For the trigger Jim recommended a Bix & Andy from Chris at Bullet Central. I then called Jim Cline, and he got Brux to donate the barrel. Then, I talked to my NightForce contacts, Allen Stillwell and Wayne Dayberry. They donated a competition scope.
My next phone call was back to Doyle Anglin and I told him what had been donated. He then talked about ‘fitting and chambering, pillar bedding, and stock by Dixie Guns’. When Dave Short heard what we were doing, he donated a trigger guard, chamber cleaning kit, and a barrel tuner. Jim called Linwood Harrell who donated our scope rings. We were almost complete, and I told them that I would spray the finish on the stock. When this news got out, it caused a great deal of excitement.”
Prize Rifle Eligibility and Award Procedures
This custom rifle will be given away at the awards banquet on November 10, 2018 in Orangeburg, SC. The winner will be chosen using tickets earned during the season. A shooter will “earn” 1 prize chance ticket for each match attended in the SE region ranges listed above, AFTER attending five (5) matches. (If you attend four matches or less you will receive 0 tickets for attendance.) You can get 5 additional tickets for a perfect 2,500 score and 10 additional tickets for attending one match minimum at each participating range. We will keep track of the tickets earned and they will be passed out at the banquet for you to personally place them in the container.
Prize Rifle Being Constructed at Doyle Anglin and Ronnie Milford shops:
Support the Sponsors — This is a very impressive prize. Keep the generosity of all who donated to the project in mind the next time that you are in the market for products they make or sell. In the future we may offer a follow-up story about the rifle winner and his/her first competition with this 30 BR benchrest rifle. In any case, on November 10, 2018, someone is going to be very happy with their valuable prize.
Built to Shoot — Remember this rifle was created by donations, to grow the sport, and promote shooting, not to sell for monetary gain. If you do not plan on shooting this rifle, please donate it to an upcoming shooter. Ronnie Milford, and Jim Cline worked hard to make this dream become a reality. Let’s not let down the sponsors who continue to support us.
Share the post "Prize Rifle for IBS Shooters in the Southeast Region"
Report by Boyd Allen, IBS Vice President Photos by Hillary Martinez
Many of the nation’s best Score Benchrest shooters came to Maryland last month for the IBS 200/300-Yard Score Nationals. This is a one-shot-per-bullseye discipline dominated by accurate 30-caliber cartridges such as the 30 BR. Over the weekend of the 4th and 5th of August, 42 shooters participated in the 2018 IBS 200/300-Yard Score Nationals, held at the Thurmont Conservaton & Sportsman’s Club, in Thurmont, Maryland. Forty-one competitors shot Varmint for Score (VFS). Between the two 6X disciplines there were six competitors, equally divided between Hunter (H) and Varmint Hunter (VH). Dewey Hancock was “Top Gun” for the match, winning the VFS 200/300 Grand Agg with 500-23X, a possible new record.
There are six bullseyes on an IBS Score target. Competitors take one shot per bull for five scored shots. The sixth (bottom right) bullseye is reserved for sighter shots.
Rising River After Rain
This match had some unique challenges — caused by a river that overflowed after a rain. Thankfully, the match proceeded without major problems once needed equipment was moved. It rained nearly half an inch the Friday night before the match, as it had for several days. Given the flooding, there was a slight delay Saturday morning. The scoring trailer had to be moved because it been parked (before the rain) in a low area adjacent to where Big Hunter Creek empties into the Monocacy River. (In the satellite view, the firing line cover is in the middle, about one-third up from the bottom.)
Hot and Humid in Maryland — The match director described the weather as very hot and humid. On Saturday, the temperature varied from 66 to 81 degrees, the humidity from 62 to 100 %, and the wind speed from 0 to 9 mph. On Sunday, things warmed up a bit, the humidity was reported as a little lower, as was the wind speed.
The Green Fields of Thurmont — With recent rains at Thurmont, lush green grass stretched from firing line to targets. This elicits envy from a shooter who has spent all of his time on ranges that do not have a single blade of green anywhere, except for a few weeks during a short rainy season. To my eyes, this range is beautiful.
Thurmont shooters are blessed with a truly outstanding facility that serves all types of shooting. There are fifteen covered benches of mixed construction under a sturdy cover, with plenty of parking both for vehicles and RVs. Learn more about the Thurmont Club at TCandSC.org.
TOP TEN Match Results, and Equipment List
Can anyone identify that big gold-tone coaxial rest on the right?
The VFS Grand Aggregate Top Five were: Dewey Hancock (1st Place), John Bosley (2nd), Ronnie Milford (3rd), Brian Fitch (4th), and Jim Cline (5th). VFS winner Dewey Hancock shot a possible new 200/300 yard record with a 500-23X.
Top shooters left to right: Dewey Hancock, Nick Breeden, Brian Fitch, Glen Olenick, Robert Brooks, Steve Cameron, Dean Breeden (arms raised), KL Miller, Jim Cline, Ronnie Milford, John Bosley.
Wayne France — with the “I just won a Nightforce” smile!
Steve Eller smiling — BIB Bullets from Randy Robinette are always a good choice.
Dean Breeden, Match Director and Competitor
Match directors do not get the appreciation they deserve. The match calendar would be blank without them. Score Nationals Match director Dean Breeden ran a great show here. In addition to rescuing a trailer from flood waters, and running the 200/300 Score Nationals, Dean also himself competed at the Nationals, shooting two rifles. He did well, with Top Ten finishes at both distances, in both VFS and Hunter classes (3rd in Hunter at 300 yards).
While Dean may be under-appreciated as a match director, Dean is widely recognized as one of the best IBS score shooters out there. Dean holds six (6) current IBS Score Shooting records.
In his Match Report, Dean acknowledged and thanked the generous match sponsors:
BIB Bullets
Brunos Shooter Supply
Brux Barrels
Dave Short Customs
Eddie Harren
Krieger Barrels
Nightforce
PMA Tool
Redding Reloading
ShadeTree Engineering
Wilson Dies
Parting Shot — Down by the Riverside…
Share the post "IBS Match Report: 2018 200/300-Yard Score Nationals"
Have you ever expanded a .22 or 6mm cartridge all the way up to .30-caliber? If so, you know this can be a difficult procedure that stresses the case necks and neck-shoulder junction. A significant neck-size expansion done in one big jump can increase run-out, cause doughnuts, or worse yet, even split the brass. Therefore you want to proceed in increments, increasing the neck diameter in stages. One smart way to do that is to use a Progressive Press. This article explains how…
The most successful short-range brenchrest-for-score cartridge is the 30 BR. That cartridge, as well as 30 BR variants such as the 30 BRX, all start with the 6mmBR Norma parent cartridge, typically with Lapua 6mmBR brass. To get a nice 30 BR case you want to expand in stages, increasing the inside neck diameter incrementally from .243 to .308.
Darrell Jones of DJ’s Brass Service creates thousands of 30 BR cases each year. He has found a clever way to speed up the process — Darrell uses a Progressive Press. He runs his 6BR brass through four (4) separate Hornady neck-sizing dies with expander mandrels. First there is a .257 die, followed by .264 (6.5mm), .284 (7mm), and then .308. Then a fifth and final K&M die provides one last, slight expansion so the newly-fashioned 30 BR cases perfectly fit the arbor of Darrell’s neck-turning tool.
So to repeat, the case starts as .243 (6mm), then moves in up stages .257, .264, .284, and .308, with a final “finishing” step prior to neck-turning. You can see the expansion in this video, which starts with 6mmBR brass that was first hydro-formed to 6 BRX:
Watch 6mm Cases Expanded to 30-Caliber (6BRX to 30 BRX)
For this demo video, Darrell expands just one case at a time. However, he can also put multiple cases in the progressive — one per station. This takes a little more effort, Darrell says, but the results are still excellent. Darrell tells us: “I do put multiple cases in the progressive to save time. The results are the same — I just wanted to show a single-step process and how it reduces run-out by not stressing the shoulder with one big expansion from 6mm straight to 30 caliber. Doing the operation in multiple stages avoids binds and helps keep the shoulders concentric.”
This same multi-stage procedure can be use to expand other cartridge types. For example you could take .221 Fireball brass in stages up to .308 to create 300 Blackout brass.
Darrell uses caliber-specific, Hornady neck-sizing-only dies with elliptical expanders. Darrell tells us: “The Hornady elliptical expander has a reduced bearing surface that puts less strain on the brass when expanding the necks to the next size.” The fitting at the bottom of the die is the Lock-N-Load die bushing that allows fast die changes.
These particular cases used in the video were first hydro-formed to 6BRX then expanded to 30 BRX before neck turning. DJ’s Brass offers hydro-forming for many popular wildcat cartridges such as 6 PPC, 6mm Dasher, and .284 Shehane.
Share the post "How to Expand Cartridge Brass in Stages with Progressive Press"
This story, from our Gun of the Week Archives, offers a good intro to the 30 BR cartridge, which is still the leading chambering for short-range Score Benchrest.
What’s better than one custom-built 30 BR with gorgeous wood and top-shelf components? A matching pair of course. Just ask Australian shooter Greg Roche (“Caduceus” in our Forum). A decade ago, Greg spent two years living and working in the USA. While in America, he commissioned two matched custom rifles to bring back to Australia for Hunter Class BR matches. Though the look-alike rigs are both chambered in 30 BR, one is designed for the Australian “Traditional” centerfire Hunter Class (10-lb limit), while the other is purpose-built for the “Custom” centerfire Hunter Class (14-lb limit). The 10-lb Traditional rifle features a fully-functioning two-round magazine and a 6-power scope. In contrast the Custom Class rifle is a single-shot action, with a 45X Leupold scope. The Custom weighs 13.5 pounds so it can also be used in traditional Heavy Varmint Benchrest matches if desired.
Tale of Two Rifles Story and Photos by Greg Roche (“Caduceus”)
The USA boasts some of the finest precision rifle-builders and Benchrest parts suppliers in the world. Before returning to Australia after two years in the States, I decided to have two special BR rifles built using American components and skilled labor. I wanted a matched pair–twin guns that would be as handsome as they were accurate. The heavier gun of the pair, the 13.5-lb Custom Class rifle, features top-of-the-line (but well-proven) technologies and components. With the 10.5-lb Traditional Class rifle, we had to develop new solutions to allow the 30 BR cartridge to feed from a functional two-round magazine. Here is my saga of how my twin 30 BRs were conceived and built, and how they have performed in competition.
BACKGROUND — The 30 BR for Score Competition
The 30 BR is a wildcat cartridge based on a necked-up version of the 6mmBR Norma case. It originated in U.S. Benchrest circles where it found its niche in Varmint For Score (VFS) matches. Unlike traditional Benchrest, where group size determines the winner, VFS matches are shot on a target with multiple, concentric-ringed bullseyes. Point total is based on “best edge” shot location (one shot per bull). In score competition, the 30 BR’s “supersized” .308-diameter hole offers an advantage over the 6mm hole created by a 6 PPC, the dominant group BR chambering.
The starting point for loading the 30 BR wildcat is Lapua 6mmBR brass. These are necked up as a single-step operation using a .30 caliber tapered expander ball (or dedicated expander mandrel). This will leave a bulge in the neck, so the expanded case neck is normally turned to bring the thickness down to the correct dimension for the chamber. I turned these necks down to .010″ wall thickness using a Stiller neck-turning tool. It features an eccentric mandrel similar to the Nielson “Pumpkin”. Loaded rounds measure .328″ neck diameter. This gives minimum clearance in my .330″ neck chamber, so very little neck resizing is needed after firing. Cases are trimmed to 1.500″ prior to turning to ensure consistency since the Stiller tool indexes the length of cut off the case mouth. Other than that, cases are just chamfered, loaded and made ready to shoot. No special fire-forming is required.
17-Twist Barrels for Both Rifles
Texan gunsmith Mike Bryant chambered both barrels. Mike also polished both barrels to a high-gloss to match the receivers. In this game, barrels are consumables, much like powder and primers, so most owners wouldn’t bother to polish their barrels. However a 30 BR barrel can provide up to 5000 rounds of accurate life (unlike a 6PPC barrel which might be tossed after 800-1000 rounds.) So, these barrels are likely to be on the rifles for many seasons. Given the high-gloss finish of the Grizzly actions and the beauty of the Red Cedar stocks, it would have been an injustice to leave a dull finish on the barrels.
The chambers were both cut with the same reamer supplied by Dave Kiff of Pacific Tool and Gauge. Randy Robinett, one of the originators of the 30 BR wildcat, specified the reamer dimensions. Randy’s 118gr, 10-ogive custom BIB bullets and the 30 BR cartridge enjoy a winning track record in the USA. The 30 BR Robinette reamer has zero free-bore and a .330″ neck, and is optimized for the BIB 118s. The bullets perform best when seated far enough out to jam firmly into the rifling as the bolt is closed. The long ogive means the bullet’s bearing surface is very short.
Slow Twists for Maximum Accuracy
You may note the unusually slow twist rate of both barrels. In most .30-caliber chamberings, the barrel twist rate is 1:11 or 1:12 to stabilize 150gr to 200gr bullets. The 30 BR is optimized for 115gr to 118gr flat-base bullets and 1:17 provides sufficient stability at muzzle velocities around 2900-3000 fps. In competitive Benchrest, where every thousandth of an inch counts, over-stabilization of projectiles can hurt accuracy, so “just stable enough” is the goal; hence the 1:17 twist.
Case Forming, Case Prep, and Reloading Methods
A Sinclair case neck micrometer indicates neck thickness of 0.010″ after neck turning.
30 BR dies are readily available from a number of manufacturers. I personally use Wilson neck and seating dies with a Sinclair Arbor press, but Redding and Forster both supply high-quality threaded dies for use in a conventional press. For under $100.00 US, custom full-length dies can be obtained from Hornady and CH Tool & Die by sending them reamer prints or a couple of fired cases. Harrell’s Precision offers “semi-custom” dies. Just send them some fired cases and they select a pre-made CNC-cut die that ideally fits your chamber. You can ask the Harrell brothers for a die that’s tighter at the shoulder or base, or otherwise customized to your preferences.
Load Development and Accuracy Testing
With cases formed and bullets selected, load development is simply a matter of choosing the right primer, powder and charge weight, and loading the most consistent ammunition possible. The Lapua BR cases use a small rifle primer. The choice here was Federal 205 Match primers vs. CCI BR4 Benchrest primers. Some shooters have also had success using CCI 450 Magnum primers but it is very unlikely the small case needs this much spark to light off regular extruded powders. In my case, I selected Federal primers because availability tends to be better in Australia.
The relatively large bore-to-capacity ratio of the 30 BR case means that fast burning powders are the order of the day. Once again, US experience suggests H4198 (the Hodgdon equivalent of ADI AR2207) is the choice of match winners. The fact that H4198/AR2207 is an Australian-made product is an added bonus. So, I loaded up test rounds with AR2207 from 32.5 grains to 35.0 grains in approximately 0.3 grain increments. All bullets were seated to jam +0.010″ into the lands. This places the bullet base about two-thirds of the way down the neck and well short of the neck-shoulder junction.
Think you need a relatively long case-neck for good accuracy? Think again. Stan Ware broke all the rules with his radical Wolfpup cartridge, proving that a near-no-neck design can deliver match-winning accuracy. Read on to learn how the Wolfpup works…
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
To get the requisite HBR case capacity, Stan figured he needed to boost the volume of a 30 BR case significantly, so he would have to move the shoulder forward — a lot. He did this by running a 30 BR reamer deeper and deeper, test-firing brass along the way. After three reamer passes, he ended up with the capacity he needed (the Wolfpup holds 45.3 grains of water). But then he looked at the finished product — a case with almost no neck, and he wondered “how could this possibly work?”.
From Trashbin to Winner’s Circle
Ware’s prototype Wolfpup ended up so short-necked, so unlike any “normal” cartridge, that Stan figured it was “dead on arrival”. Stan told us: “I said ‘this ain’t going to work’ and I threw the brass in the trash can. Honest. But later I thought I better shoot it and see what it does.” There was one problem — Stan didn’t have a seating die. He noticed the short neck provided a bit of tension after fire-forming, so he literally seated some bullets, BIB 118s and 125s, with his fingers. For powder he used H4198 and started with 35 grains, one grain more than a 30 BR load. Stan then did a pressure work-up: “I actually went up to 41.0 grains and didn’t have a sticky bolt. I ended up at 37.9 grains of Hodgdon 4198 — that gave 3150 fps, where the sweet spot is.” (Later testing revealed a second accuracy node at about 3020 fps, using 36.4 grains of H4198).
Stan’s radical short-necked Wolfpup shot great from the get-go. Once he found the right velocity node, the gun shot in the ones and zeros with both 7-ogive and 10-ogive bullets, both 118s and 125s. The Wolfpup proved easy to tune — it’s not finicky at all. And it’s a winner. Stan began shooting the Wolfpup in 2006 in both VFS and HBR matches and the ‘Pup’ started winning matches right away. In 2007, Stan won the Wisconsin State VFS Championship shooting the Wolfpup. In June 2010 at a Webster City, Iowa VFS match, Stan won the Grand Agg and posted high X-Count for the match, while placing first at 100 yards and second at 200 yards. How’s that for a cartridge that almost ended up in the trash bin?
Does Stan deserve an award for “most innovative benchrest cartridge design”? Stan chuckles at that notion: “I’m not a hero, not a genius. I really didn’t do anything. The fun part is thinking outside the box — for me anyway. Shooting is an age-old process of experimentation. You never learn it all.”
Why Does It Work?
How can such a radical case design perform so well? “That’s a good question,” Stan admitted. He then explained: “The 30 BR is inherently accurate, so I figured something based on the 30 BR should be accurate too. My personal belief is that the short neck doesn’t hurt you. Plus if the throat in the barrel is straight, the bullet can self-align. If the chamber is good, the bullet will self-center in the throat. In a regular case there’s not much room to do that, so a bullet can start off-center, and you don’t get the same results every time. A bullet in a conventional case is stopped from self-centering by the stiffer neck, particularly in a tight-clearance BR gun.”
Reloading the .30 Wolfpup
Stan’s Wolfpup chamber has a neck dimension of 0.330″. He turns his necks for a 0.327″ loaded round. Bullets are jammed .020″ forward of first contact with the lands. When he closes the bolt it pushes the bullet back in the case — almost a soft seat. Stan notes: “To start with I normally bump the shoulder .0005-.001″ so they go in easy. Just by doing that I get a little neck tension. I also use a bushing. Right now I’m running a .322, but it’s not particularly sensitive. I’ve tried one-thousandths increments up to a .325 bushing and couldn’t tell a lot of difference.” For bullet seating, Stan uses a Wilson 30 BR seater die into which he ran the chamber reamer. This gives perfect case fit during seating operations.
About the Illustrated Gunstock
You’ll notice Stan’s stock contains scenes from Vietnam and a quotation. Here’s the story. A Vietnam combat veteran, Stan served “in-country” with the Army’s 509th Non-Divisional Combat Unit (out of Fort Riley) from 1965-1966. Shortly before he left Vietnam, Stan went to a shop to have a souvenir lighter engraved. He asked the vendor for an appropriate inscription. The shop’s metal-worker engraved: “War is a tragedy. It takes mans’ best to do mans’ worst.” That message, along with the combat scenes, were hand-painted on Stan’s rifle by his wife Susan, a talented artist. She spent more than 20 hours painting the rifle stock.
Photos courtesy Ryan Ware and Stan Ware.
Share the post "Thinking Outside the Box — Stan Ware’s Wicked No-Neck Wolfpup"
Earlier this month the International Benchrest Shooters (IBS) held its annual 200/300 Yard Score Nationals at the Mid-Carolina Gun Club in Orangeburg, South Carolina. The event was attended by 40 shooters from the Mid-Atlantic states. Despite sometimes tricky conditions the IBS competitors produced impressive results. Wayne France shot a great match to win the Grand Agg with 497-14X as well as take top honors at 300 yards (249-6X). Steve Hill won the 200-yard stage with a 250-10X, not dropping a point even in challenging conditions. Finishing a close second in the Grand Agg was bullet-maker Allie Euber with 497-11X. Third overall was Jim Cline with 496-10X.
TOP TEN Grand Aggregate Results
IBS 200/300 Yard Score Nationals, South Carolina, Oct. 14-16, 2016
Report by Paul Hammer, IBS Editor
I attended the 200-300 Yard IBS Score Nationals this year, being held for the first time at the Mid-Carolina Gun Club in Orangeburg, South Carolina. The Mid-Carolina Club is a well-established, multi-discipline shooting facility that offers Benchrest matches, as well as other types of rifle, pistol, skeet, and trap shooting. The well-designed Benchrest facility at the club is fairly new.
The Mid-Carolina Gun Club Benchrest range featured 20 benches, with a new and very nice covered area. There is plenty of room for the competitors to “set up shop” for reloading and do gun maintenance between relays. The Benchrest area even has its own office for weighing in the guns etc., and its own restrooms. The Benchrest area also has a modern PA system that permits the range officers to run the match safely and efficiently.
The Mid-Carolina Gun Club offered 20 concrete benches, sheltered from the sun.
Mother Nature provided extra nice southern weather for everyone for the entire weekend, except for some persistent and tricky winds to keep the shooters on their toes. Friday was the first day of this exacting Benchrest shoot that gave the competitors time for practice and to set up the wind flags before the Saturday 200-yard event. And Saturday’s conditions proved that the wind flags would be necessary!
Shifting Conditions on Saturday Challenged Shooters
Saturday morning started out with lots of erratic shifting winds which tested the competitors’ wind-reading skills. The winds did subside later in the day, but not much, and after each relay shooters were talking about the one or two that “got away” from them.
Benchrest Score shooting is all about trying to “hit the dot” on 25 separate bullseye targets over five relays. The center “dot” is only about 1/16th of an inch in diameter, and if you hit it, the hits score an “X” for you. Perfect scores of 250 are the goal of top competitors in this exacting rifle competition. Hits on the Xs are what break the ties.
IBS Score Benchrest shooting is fun for young and old alike….
Most score rifle shooters usually use a co-axial (Joystick-type) front rest that enables them to rapidly position their rifle for each shot, moving from target to target quickly and precisely.
“Blonde on Blonde” — Here’s a lovely blonde maple stock resting in a custom light-colored wood cleaning cradle box. Handsome gun, nice workmanship on the cleaning box.
Rifles for Score Benchrest are usually built especially for the sport. The 30 BR is by far the most popular cartridge for this discipline. The 30 BR’s larger-diameter bullet hole gives the shooter a scoring edge over a 6mm or smaller caliber. Though the 6PPC is “King of the Hill” in group matches, the larger-caliber 30 BR rules the roost in Score competition.
Mr. Ronnie Long is one of the leading developers of the 30 BR and also an excellent riflesmith. Ronnie showed up Saturday morning for the match to see many of his friends. It was good to see him at the match! It is not surprising that many of the competitors use his rifles. I would also mention that the 30 BRs that Ronnie crafts are really works of art. Ronnie’s custom-built rifles display precision metal and beautiful stock work (many have exotic paint jobs), and of course they are very accurate!
Sunday’s 300-Yard match concluded the tournament. The competitors really seemed to enjoy this match, which gave them the opportunity to pursue perfection in shooting, and to learn from others. Many thanks to the Mid-Carolina Gun Club, whose members assisted with the targets and cooked some great meals. The Mid-Carolina Club proved an excellent host facility, delivering a well-run match and excellent meals for the competitors.
The Mid-South Club in South Carolina hosted this year’s 200/300 Score Nationals.
If you’d like to try out the sport of Benchrest shooting then you’ll be welcome to join us at any of our matches. The IBS offers a variety of rifle-shooting disciplines: Group BR Matches, Score BR Matches, Mid-Range Matches, and Long-Range Matches. It’s a great way to learn a lot about rifle shooting and meet some nice folks too!
For complete match results from the 200/300 Nationals, visit the IBS Website. You’ll find full individual results, plus a full equipment list. Shown below is the the Top TEN equipment list (click to enlarge).
TOP TEN Equipment List — CLICK to VIEW Full-Screen:
While some competitors shoot, others reload — that’s the nature of the short-range Benchrest game.
Share the post "IBS Match Report: 2016 200/300-Yard Score Nationals"
We first ran this story a few years back. But it’s still a very interesting subject for benchrest shooters. Shown above, the 30 BR (a 6mmBR necked up to .30 Caliber) currently rules the benchrest-for-score game. However, a 30 BR Improved offers some potential advantages, particularly when the winds are strong or tricky. In this article Al Nyhus explains his 30 BRX wildcat. Running Hodgdon H4198, Al says he gets an easy 150 -200 FPS more than the conventional 30 BR. That can translate to less drift in the wind. It also lets you pursue a higher speed node, which can lead to improved accuracy with some barrels.
Forum member Al Nyhus is a top-level score shooter who has competed successfully with the 30 BR cartridge in VFS (Varmint for Score) matches. Al has been working on an “improved” 30 BR cartridge that delivers extra velocity. Al’s 30 BRX cartridge is inspired by the 6mm BRX cartridge, popular in 600-yard benchrest and across-the-course competition. The 6mm BRX cartridge maintains the same sidewall profile and shoulder angle as the parent 6mmBR case. Likewise, the 30 BRX retains the 30° shoulder used on the popular 30 BR cartridge.
Al reports: “Thought you might like to see what I’ll be working with in my VFS gun this season. It’s a true 30 BRX — a 30 BR with the shoulder moved forward 0.100″ with the standard BR shoulder angle. Stan Ware of SGR Custom Rifles built one last season for Steve Grosvenor and I was really impressed by the performance of Steve’s gun. The 30 BR barrel on my VFS gun needed replacing, so the new 30 BRX got the nod.”
30 BRX Delivers 150-200 FPS More Velocity than 30 BR
Al says his 30 BRX gives a solid 150-200 fps speed gain over the 30 BR at the top, while needing just 2.5-3.0 more grains of Hodgdon H4198 to do so. A 30 BR case holds on average 40.8 grains of water, while the 30 BRX holds 42.3 grains (roughly 4% more). So the 30 BRX delivers a 7% increase in velocity with a mere 4% increase in H20 capacity. That’s pretty good efficiency. [Editor’s Note: Assuming 34 grains of H4198 is a typical 30 BR match load, Al’s increase of 2.5-3.0 grains for the 30 BRX represents roughly a 7.5-8.5% increase in actual powder burned. That explains the higher velocities.]
Why did Nyhus decide to try an “improved” 30 BR?
Al explains: “The 30 BRX was created to operate at a [higher] velocity level than can be achieved with the standard 30 BR case, while at the same time keeping the easy-tuning characteristics of the standard 30 BR case. We also wanted to use the same powders currently used with the 30 BR and maintain similar operating pressures.” Is the 30BRX harder to shoot because of the increased velocity? Al doesn’t think so: “In a 13.5-lb HV gun, the 30 BRX case is a pleasure to shoot with just a flea bite of recoil.”
Will the 30 BRX Replace the 30 BR in Score Competition?
The 30 BR is already an exceptionally accurate cartridge that dominates short-range Benchrest for Score competition. Will the 30 BRX make the standard 30 BR obsolete? Nyhus doesn’t think so. However, Al believes the 30 BRX offers a small but important edge in some situations: “On any given day, it’s the shooter that hits the flags best and makes the fewest mistakes that ends up on top. No amount of velocity will save you when you press the trigger at the wrong time. Missing a switch or angle change at 200 yards that results in 3/4″ of bullet displacement on the target can’t be compensated for with another 200 fps. That’s the hard fact of benchrest shooting. But on those days when, as Randy Robinett says, ‘our brains are working’, the BRX may offer enough of an advantage to turn a close-but-no-cigar 10 into an ‘X’ at 200 yards. Or turn a just-over-the-line 9 into a beggar 10.” Given the fierce competition in Score matches, an extra 10 or another X can make the difference between a podium finish and also-ran status.
Share the post "30 BRX Wildcat — a 30 BR Improved That Runs Significantly Faster"
Here’s good news for short-range benchrest shooters. The two most popular powders for the 6PPC, Vihtavuori N133 and Accurate LT-32, are now in-stock at Powder Valley Inc. (PVI). In fact, Powder Valley even has the hard-to-find 8-lb jugs of N133 and LT-32.
For you 30BR score shooters, PVI has both Hodgdon H4198 and Accurate LT-30 in stock, the two most popular powders for the 30BR. A slightly faster-burning version of LT-32, LT-30 is a very promising powder for the 30 BR, while H4198 has traditionally been the “go-to” choice for the 100/200-yard score shooting game. PVI has 1-lb and 8-lb containers of both these ultra-accurate powders in stock now. Visit PowderValleyinc.com, and click on the “Powders” link in the Menu.
6PPC Powders
30 BR Powders
– PVI has 1-pound LT-32 for $27.10
— PVI has 8-pound LT-32 for $204.30
— PVI has 1-pound N133 for $31.25
— PVI has 8-pound N133 for $202.00
– PVI has 1-lb LT-30 for $27.10
— PVI has 8-pound LT-32 for $204.30
— PVI has 1-pound H4198 for $23.25
— PVI has 8-pound H4198 for $165.00
Share the post "Point-Blank Powders in Stock — PVI Has Jugs of the Good Stuff"
Think you need a relatively long case-neck for good accuracy? Think again. Stan Ware broke all the “rules” with his radical Wolfpup cartridge, proving that a near-no-neck design can deliver super accuracy. Read on to learn how the Wolfpup works…
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
To get the requisite HBR case capacity, Stan figured he needed to boost the volume of a 30 BR case significantly, so he would have to move the shoulder forward — a lot. He did this by running a 30 BR reamer deeper and deeper, test-firing brass along the way. After three reamer passes, he ended up with the capacity he needed (the Wolfpup holds 45.3 grains of water). But then he looked at the finished product — a case with almost no neck, and he wondered “how could this possibly work?”.
From Trashbin to Winner’s Circle
Ware’s prototype Wolfpup ended up so short-necked, so unlike any “normal” cartridge, that Stan figured it was “dead on arrival”. Stan told us: “I said ‘this ain’t going to work’ and I threw the brass in the trash can. Honest. But later I thought I better shoot it and see what it does.” There was one problem — Stan didn’t have a seating die. He noticed the short neck provided a bit of tension after fire-forming, so he literally seated some bullets, BIB 118s and 125s, with his fingers. For powder he used H4198 and started with 35 grains, one grain more than a 30 BR load. Stan then did a pressure work-up: “I actually went up to 41.0 grains and didn’t have a sticky bolt. I ended up at 37.9 grains of Hodgdon 4198 — that gave 3150 fps, where the sweet spot is.” (Later testing revealed a second accuracy node at about 3020 fps, using 36.4 grains of H4198).
Stan’s radical short-necked Wolfpup shot great from the get-go. Once he found the right velocity node, the gun shot in the ones and zeros with both 7-ogive and 10-ogive bullets, both 118s and 125s. The Wolfpup proved easy to tune — it’s not finicky at all. And it’s a winner. Stan began shooting the Wolfpup in 2006 in both VFS and HBR matches and the ‘Pup’ started winning matches right away. In 2007, Stan won the Wisconsin State VFS Championship shooting the Wolfpup. In June 2010 at a Webster City, Iowa VFS match, Stan won the Grand Agg and posted high X-Count for the match, while placing first at 100 yards and second at 200 yards. How’s that for a cartridge that almost ended up in the trash bin?
Does Stan deserve an award for “most innovative benchrest cartridge design”? Stan chuckles at that notion: “I’m not a hero, not a genius. I really didn’t do anything. The fun part is thinking outside the box — for me anyway. Shooting is an age-old process of experimentation. You never learn it all.”
Why Does It Work?
How can such a radical case design perform so well? “That’s a good question,” Stan admitted. He then explained: “The 30 BR is inherently accurate, so I figured something based on the 30 BR should be accurate too. My personal belief is that the short neck doesn’t hurt you. Plus if the throat in the barrel is straight, the bullet can self-align. If the chamber is good, the bullet will self-center in the throat. In a regular case there’s not much room to do that, so a bullet can start off-center, and you don’t get the same results every time. A bullet in a conventional case is stopped from self-centering by the stiffer neck, particularly in a tight-clearance BR gun.”
Reloading the .30 Wolfpup
Stan’s Wolfpup chamber has a neck dimension of 0.330″. He turns his necks for a 0.327″ loaded round. Bullets are jammed .020″ forward of first contact with the lands. When he closes the bolt it pushes the bullet back in the case — almost a soft seat. Stan notes: “To start with I normally bump the shoulder .0005-.001″ so they go in easy. Just by doing that I get a little neck tension. I also use a bushing. Right now I’m running a .322, but it’s not particularly sensitive. I’ve tried one-thousandths increments up to a .325 bushing and couldn’t tell a lot of difference.” For bullet seating, Stan uses a Wilson 30 BR seater die into which he ran the chamber reamer. This gives perfect case fit during seating operations.
About the Illustrated Gunstock
You’ll notice Stan’s stock contains scenes from Vietnam and a quotation. Here’s the story. A Vietnam combat veteran, Stan served “in-country” with the Army’s 509th Non-Divisional Combat Unit (out of Fort Riley) from 1965-1966. Shortly before he left Vietnam, Stan went to a shop to have a souvenir lighter engraved. He asked the vendor for an appropriate inscription. The shop’s metal-worker engraved: “War is a tragedy. It takes mans’ best to do mans’ worst.” That message, along with the combat scenes, were hand-painted on Stan’s rifle by his wife Susan, a talented artist. She spent more than 20 hours painting the rifle stock.
Photos courtesy Ryan Ware and Stan Ware.
Share the post "Wildcat with Almost No Neck — Stan Ware’s Wicked Wolfpup"
Report by Clint Johnson, ACWLC
The 2015 IBS 200/300 Yard National Championships were held September 12-13 at the Ashe County Wildlife Club (ACWLC) outside Jefferson, North Carolina. Fifty shooters from 13 states attended. Nightforce was the major event sponsor, donating a $2,400 rifle scope. While rain threatened to mar the 200-yard match on Saturday, none fell. By Sunday, the day of the 300-yard shoot, the first cold front of the fall had passed, leaving mostly sunny conditions.
Conditions Keep Scores Low At 200/300 Yard Nationals
The rain that fell on Friday night started drying Saturday morning when the sun rose. That slow evaporation created mirage that plagued shooters looking northeast down the two-year-old, 300-yard range with a 50-foot high backstop. The wind that came in with the cold front also hampered shooters on both days.
Mean Conditions at Ashe County
“Shooters told me the conditions were as bad as they have ever shot”, said Steve Eller, the IBS chair for the Wildlife Club. “We all had a hard time seeing the rings through the mirage blur. No one shot clean, and no records were set.”
Shooters came from as far away as Maine, Indiana and Florida to Ashe County, “the coolest corner of North Carolina”. The ACWLC range is located in the mountainous northwest point of the state with Virginia to the north and Tennessee to the west. Some of those shooters have made every one of the four IBS-sanctioned matches held at the club this year and last year. The Club hosted the 100 and 200 Yard National Championship in 2014, the first full year since the opening of the club house in 2013 with its 30 benches protected by an overhang.
“I love coming here. It is my favorite place to shoot,” said Hillary Martinez of Damascus, Maryland. Hillary, shown below, was one of the four women shooters this year.
Danny Hensley of Jonesville, Virgina, won the Grand Aggregate Varmint for Score (VFS) with a score of 493 (10X), followed by David Richardson with 492 (11X) and Randy Jarvais with 491 (12X). Danny talks about his victory in the audio clip linked below. To listen, click on the black arrow in the white circle.
AUDIO FILE: Danny Hensley Talks about the Conditions at the 200/300 Nationals.
Here are all the Class Winners at the IBS 200/300 Yard Nationals:
Wayne France of Burke, Va. won the 200-Yard VFS with a score of 250 (11X), followed by rookie Ken Habedank with score of 250 (8X), and David Richardson with a score of 250 (8X).Morris Williams of Eden, Maryland, won the 300-Yard VFS with a score of 244 (3X), followed by Danny Hensley with a score of 243 (4X), and David Richardson with a score of 242 (3X).
There were just five (5) shooters in the Hunter Class. Dean Breeden topped the small field to win the Hunter Grand Aggregate with a score of 483 (10X), followed by Randy Jarvais with a sore of 480 (7X), and K.L. Miller with a score of 478 (12X). Randy Jarvais won the 200-Yard Hunter with a score of 248 (6X), followed by K.L. Miller with a score of 246( 8X), and Dean Breeden with a score of 246 (7X). Orland Bunker of Damariscotta, Maine, won the 300-Yard Hunter with a score of 238 (2X), followed by Dean Breeden with a score of 237 (3X), and K.L. Miller with a score of 232 (4X).
Dean Breeden (Frederick, Maryland) had a beautifully-figured wood composite rifle.
Barbecue North Carolina Style
Some shooters remarked that they drove to Ashe County not only to shoot, but to eat as well. A 300-pound hog was slow-cooked all Friday night by Club members. Corn was also roasted on the grill. The cost of this distinctive North Carolina pork barbecue was included in the registration fee.
Ashe County Wildlife Club maintains a website, www.acwlc.org and a public Facebook page. The Club hosts rifle, pistol, and shotgun sports (skeet, trap, sporting clays) events at its range facility located about 15 miles east of West Jefferson at 3220 Big Peek Creek Road, Laurel Springs, NC (turn north off NC Highway 88). Visit www.acwlc.org to learn more about the club or obtain Membership applications.
Share the post "Match Report: IBS 200/300 Yard Score Nationals in NC"
Here’s the early morning view, looking down-range through Orland Bunker’s 6X Hunter Class scope.
21st Annual Bud Pryor Memorial Match: June 12-14, 2015 Match Report by Richard Grosbier for IBS
It was hot and humid for the 21st Bud Pryor Memorial match. Temperatures were in the high 80s with humidity in the high 90% range all three days. For once we never got rained on. Thunderstorms with high winds were forecast for both Saturday and Sunday. Luckily the storms materialized AFTER the shooting concluded on both days. Wind was not especially strong all weekend but it was tricky and could let off, pick up, or reverse in a heartbeat. Even at 100 yards (on Friday), good shooters lost points.
Thurmont Conservation & Sportsman’s Club, Thurmont, Maryland Click Photo above to see large image.
Three 750s Shot in Varmint for Score Grand Agg
In the Varmint for Score (VFS) 100-200-300 Grand Aggregate John Cascarino was the big winner with a 750-35X. This writer was very happy to see John win a big match. He is a great guy who does an enormous amount of work for all IBS shooters and clubs in his role as IBS Second Vice President. Ricky Read was second with a 750-31X followed closely by Wayne France with 750-28X. It is quite unusual for there to be three 750 scores shot at the “Bud”. I checked the IBS website for 11 years back and found no more than two and frequently there are no 750s shot at the event.
VFS Grand Aggregate Winner John Cascarino.
Top honors in Hunter Class went to Randy Jarvais (below) with a 742-23X. Second went to Gary Long with 742-22X and third to Orland Bunker with 737-25X. Most people had an enjoyable weekend, the threatened thunderstorms never materialized until after the shooting was over.
Hunter Class Winner Randy Jarvais.
Roy Hunter and his “Ugly Stock”
Roy Hunter crafts superb wood-composite, carbon-reinforced stocks. These great-shooting stocks are very popular among benchresters, particularly on the East Coast. Roy complained that every time he built himself a rifle somebody would offer to buy it at a price he could not refuse. That was frustrating so Roy built the odd-looking, calico rifle shown below. He deliberately made it “so ugly nobody that would want it.” At least it does (sort-of) match his multi-color prop-top hat. (Will propeller-top beanies become a hot “must-have” item at Benchrest matches, augmenting downrange wind-flags?)
Click Photo below to see large image:
Day by Day Results:
100 Yards on Friday
A large contingent of Southern shooters were competing at the Bud Pryor for the first time. Initially, it seemed that the southerners might take home all the marbles. At Friday’s 100-yard match, Richard Sissel took first with a nice 250-24X score, followed closely by Ronnie Milford with 250-23X. James Parham, also a Southerner, was third with the first of two 22X scores. Match Director Dean Breeden placed fourth.
In Hunter Class, “Mainiac” Orland Bunker turned in an impressive 250-18X score at 100 yards, shooting with a 6-power scope and 2-1/4″-wide fore-end. To put that in perspective, Orland’s score would have placed him ahead of 60% of the VFS shooters, all of whom benefited from using wider stocks and high-magnification optics.
200 Yards on Saturday Saturday the targets were moved back to 200 yards and the fun continued. Hall-of-Famer Allie Euber from Vermont took top honors in VFS class with a 250-14X score from his LV rifle. In the Points Race for Score Shooter Of the Year (SSOY), it was another sweep for the Southern contingent. Under IBS rules, only the first rifle one shoots may garner SSOY points. Allie did, in fact, win the 200 VFS stage (with his LV). However, as he shot his HV rifle on the second relay and his LV on the third relay, Allie picked up no SSOY points.
Accumulating the most SSOY points was second place Jerry Powers with 250-13X, followed by third place Jim Cline also with 250-13X. In Hunter Class, Orland Bunker was still on a tear, logging a 248-4X score, followed closely by Gary Long with a 247-6X score. Gary’s score included a one-point crossfire penalty. Had he not cross-fired, Gary would have finished first.
300 Yards on Sunday
Sunday’s 300-yard competition is always the big equalizer at this event. Conditions were relatively mild at Thurmont for the 300-yard match but there was enough wind and mirage to keep scores down. Another Hall of Famer, Harley Baker from Pennsylvania, won the yardage with a nice 250-6X score. Dewey Hancock took second (also with a 250-6X score), followed by John Cascarino with the same score. VFS front-runner Richard Sissel shot well but two dropped points moved him down to 13th at 300.
In all there were only five 250s shot of the 44 guns in attendance. Veteran shooter Ricky Read shot 250-4X and Wayne France turned in a 250-2X performance. In Hunter class, the 100/200 front runner Orland Bunker struggled at 300 yards. K.L. Miller, who only shot the 300-yard stage, won Hunter class with a 249-5X. Miller was attempting to break the 300-yard Hunter record and almost did. Randy Jarvais was second with a 247-2X.
Target Cake is a Big Hit
Ready, Aim, Eat. A special hand-decorated cake featured a six-bull target (complete with sighter shots). Beautifully presented, the Bud Pryor bullseye cake was a huge hit with match attendees. Here is Sandy the food lady with the confectionery masterpiece. Sandy also provided wonderful home-cooked food to the shooters at Thurmont.
Share the post "IBS Match Report: Bud Pryor Memorial Match, 100-200-300"
Darrell is a hydro-forming wizard who has perfected the process over the last couple of years. He has learned a few special techniques along the way to ensure uniform case-forming.
The VFS Grand Aggregate Top Five were: Dewey Hancock (1st Place), John Bosley (2nd), Ronnie Milford (3rd), Brian Fitch (4th), and Jim Cline (5th). VFS winner Dewey Hancock shot a possible new 200/300 yard record with a 500-23X.
30 BR dies are readily available from a number of manufacturers. I personally use Wilson neck and seating dies with a Sinclair Arbor press, but Redding and Forster both supply high-quality threaded dies for use in a conventional press. For under $100.00 US, custom full-length dies can be obtained from 
Retired gunsmith Stan Ware is a talented shooter who’s not afraid to think “outside the box”. Stan competes in both Hunter Benchrest (HBR) and Varmint for Score (VFS) disciplines. In his quest to build the ultimate Hunter Benchrest cartridge, Stan created the radical “Wolfpup” wildcat, based on a 6mmBR parent case. Noting the dominance of 30 BRs in VFS matches, Stan wondered if a stretched 30 BR could work in HBR competition. The challenge was case capacity. Under HBR rules the cartridge must hold at least 45.0 grains of water, equal to the capacity of the classic 30/30 case.
From Trashbin to Winner’s Circle
Why Does It Work?
Forum member Al Nyhus is a top-level score shooter who has competed successfully with the 
Saturday the targets were moved back to 200 yards and the fun continued. Hall-of-Famer Allie Euber from Vermont took top honors in VFS class with a 250-14X score from his LV rifle. In the Points Race for Score Shooter Of the Year (SSOY), it was another sweep for the Southern contingent. Under IBS rules, only the first rifle one shoots may garner SSOY points. Allie did, in fact, win the 200 VFS stage (with his LV). However, as he shot his HV rifle on the second relay and his LV on the third relay, Allie picked up no SSOY points.
