Kelbly makes outstanding actions, including the Stolle Pandas. In the past 20 years, Pandas have probably won more benchrest matches than any other action (though BATs and Bordens are increasingly in the winning circle). Recently gunsmith Alex Wheeler of Wheeler Accuracy worked his magic on an aluminum Panda, optimizing the “ignition timing” of the action. This involves many small mods to bolt, camming surfaces, trigger, and firing pin: “The whole cam helix and detent shelf is re-cut. The firing pin and cocking piece are modified as well.” When executed properly, Ignition Timing has a number of benefits, including a smoother bolt opening/closing, improved firing pin fall, and enhanced accuracy (though the accuracy improvements can be subtle).
BEFORE Action Timing — Stiff and Clunky
Alex reports: “Normally Panda actions have plenty of firing pin fall. For one reason or another this one was very low. Before timing, firing pin fall was .210 with a Bix’N Andy (BNA) trigger. After trigger timing firing pin fall is .244 with zero cock on close.” Here is how the action functioned before timing work:
CLICK Photo to start VIDEO
Alex notes: “As you can see, after the cocking piece rides out of the detent notch it thenfalls to the trigger and is then re-cocked. This is normal on most un-timed actions.”
AFTER Action Timing — Smooth and Refined
Alex explains the modifications he made for this Panda action: “Moving the trigger back adds cock on close. The whole cam helix and detent shelf is re-cut. The firing pin and cocking piece are modified as well. I do love a timed Panda. In fact, I like aluminum actions, I think there is something to them. But yes, I also recommend Borden as my first choice.’
CLICK Photo to start VIDEO
Fix for Right-Bolt Actions Only
After seeing these videos on Facebook, one poster asked: “I do like my Panda but this is exactly why I bought a Borden action and I love it. It’s good to know you can make a Panda better. Alex, can you time a left bolt Panda?”
Alex replied: “No, the tooling I built is all for right hand actions sorry….”
Gunsmith/stockmaker Alex Wheeler is a very smart guy. Among his many clever innovations is an adjustable bag-rider that fits on the underside of the buttstock at the rear. Alex calls this a “Rudder” because it allows the shooter to align the tracking perfectly. The rudder assembly can swing left and right using an adjustment bolt. You can also adjust the Rudder’s vertical “angle of attack” with simple shims. Some guys like the Rudder’s 3/4″-wide bottom perfectly parallel with the bore axis. Others prefer a slight angle so the stock slides down a bit during recoil.
Adjustable Rudders Now For Sale
Alex has fitted these innovative, adjustable Rudders in the stocks and complete rifles he sells.And now owners of other stocks can benefit from Wheeler’s invention. Alex is offering the Rudders for sale: “I have made my adjustable Rudders for sale. Price including mounting hardware is $125 shipped. These are the same rudders I install in most ever stock I build. They’re the only way to achieve perfect tracking every time.”
Watch how the Wheeler Rudder works in this video. Alex explains: “If you pull your rifle back in the bags and the cross-hair moves, your stock is not straight. The easiest fix is to use an adjustable Rudder. They come standard on all my stocks. The white box on the 1000-yard target is 4″. With a properly-adjusted rudder it’s easy to obtain less than 1″ of cross-hair movement at 1000 yards.”
Rudder-Equipped Stock In Action (with 1000-Yard Champ Tom Mousel)
This second video shows how well a Rudder-equipped stock performs. This shows IBS 1000-yard Champ Tom Mousel running five (5) shots with his 17-lb Light Gun chambered in 6BR Ackley Improved. Note how perfectly the stock tracks. It runs smoothly straight back then comes right back on target when pushed forward by Mousel. Check it out — this is impressive.
It’s relatively easy to install these rudders on most wood and wood laminate stocks. Alex says: “Just notch the stock, and install the anchors for the adjustment bolts.” In addition, McMillan will soon be offering fiberglass stocks with a notch designed to fit the Wheeler rudder. Based on Alex’s Deep Creek Tracker stock design, these new McMillan stocks with have metals rails in the front also.
New Rudder-Equipped McMillan LRB Stock
Alex explains: “The new McMillan Rudder-equipped stock will be a version of the Deep Creek Tracker, most likely called a Wheeler LRB (Long Range Benchrest). It will feature factory installed 1/2″ wide aluminum rails in the 4″ fore-arm. It will come with the rear notch molded in for the Rudders which I will install on each stock. I will be exclusive dealer on these and hope to see the first one in June. I also have got with Edgewood to make 4″ wide front bags that will fit a standard rest top and will cost the same as their standard 3″ bag. I will have some in stock but anyone can order them direct and not have to pay the $125 price for a custom bag.”
Available for under $200.00 including front bag, the Caldwell Fire Control front rest is a remarkable value. It makes the co-axial, joystick design more affordable than ever. We used the Fire Control front rest when testing our Ultimate Varminter 20 Practical AR. Once we removed some sand from the tri-lobe front bag, the rest worked quite well.
Get a Fire Control Rest for $197.99 Precision Reloading is running a sale this week on Caldwell products. Now through May 23rd you can get the Caldwell Fire Control Front Rest for just $197.99. That’s a great deal for guys on a tight budget who want a modern joystick-style front rest. With the conversion described in this article, you can put together a system that works pretty darn well, and is more than adequate for many applications, including prairie-dog hunting (from a bench).
Upgrading Fire Control Front Rest with Sinclair Top
While most Fire Control owners are happy with the product, many have wanted to replace the tri-lobe front bag with a more conventional front bag from Protektor or Edgewood. This isn’t as easy as it looks because the width of the Fire Control top is too narrow for most standard 3″-wide front bags. On a “special order” basis, Protektor has crafted some narrower leather front bags that fit pretty well, but some shooters have decided to “upgrade” the entire front assembly.
Forum member Doug M. (aka DrJeckyl), has come up with an elegant solution that allows a Sinclair Int’l Benchrest Rest Top to be fitted to the Fire Control Rest. Doug notes: “The Caldwell Fire Control is a nice rest for the money, but it comes up short in the rest top department. The Sinclair RT-3 [or its replacement, the Gen II B/R top] fits perfect with minor modifications.” Shown below are the main components:
To adapt the Sinclair RT-3 or Gen II B/R top, Doug merely had to drill a couple holes in the RT-3 baseplate, and adapt a spacer to get the height correct: “The Caldwell factory top has a raised mounting portion so a 1/8″ piece of stock will be needed as a spacer to the flat-bottom RT-3. The spacer needs to be cut to the same length as the movable portion on the rest. And you should plan the mounting accordingly so the left thumbscrew clears the vertical height column at full left position (there is a cutaway in the rest under the thumbscrew that allows for easy access to the screw).” We have labeled the photo with dimensions, but Doug cautions you should measure your own original plate to insure the drill locations are correct for your unit.
The completed installation, with the RT-3 installed on the Fire Control rest is shown at the top of this article. Doug says it works very well. To learn more about this conversion, with Doug’s measurments for the hole-spacing and his specs on the fasteners, go to the original thread in our Shooter’s Forum. NOTE: Sinclair no longer sells the RT-3 top, but Sinclair’s $75.99 Gen II B/R top can be converted just as easily. LINK to Fire Control Rest Top Conversion Forum Thread.
Report by Kristina Holden
Even with a bit of snow left on the ground, some great long range shooting took place up in Montana recently. March 25th, 2017 was opening day for the first 1000-yard IBS match of the year at Montana’s Deep Creek Shooting Range, just outside of Missoula, Montana. With temperatures during both matches at a consistent low to mid 40s and winds blowing at a slight 2-4 mph from the south, the weekend was sure to produce some excellent results.
Framed by forested hills, the Deep Creek Range is a beautiful place to shoot.
Fifteen (15) shooters braved the cool Montana spring weather for what would turn out to be a very competitive match. On Saturday, both Richard Schatz and David Torgerson made the first Light Gun (LG) shoot-off, posting two-inch groups, with Richard taking the win (check out his targets above). David and Richard made it into the Heavy Gun (HG) shoot-off as well, this time with David taking the win. Leo Anderson took the LG score crown with a 47, while Shawn Williams took the HG title with a perfect 100.
Here Scott Stanko sets up his Light Gun. Scott won Sunday’s LG shoot-off.
Sunday’s conditions were even better and the shooters took advantage of them. Once again, some truly excellent groups were shot by Tom Mousel and Scott Stanko, both making the LG shoot-off with 2 inch groups. Scott, shown above, prevailed in the shoot-off. Richard Schatz, once again, made his way into the shoot-offs and took the HG win from Tom Mousel with a 4.889″. Jeff Reed took the HG score win over Leo Anderson with a 96. In the LG Score shoot-off, Jim Williams nailed a real stunner of a group, taking the Score win with a 2.018” – 49. Check out the group below. That sure would have helped his Aggs if it happened in the relay!
Jim Williams with his 2.018″- 49 group. That works out to 0.19 MOA — amazing accuracy at 1000 yards.
New Cartridge Debuts — the 6mmBR Ackley Improved (6mm BRA)
The 2017 season has brought some new gear/cartridge developments and many shooters were able to put them to good use in the first match of the year at Deep Creek. Leo Anderson and Tom Mousel were both shooting the new 6mm BRA (6mmBR AI), a 6mmBR Norma with a reduced body taper and a 40 degree (40°) shoulder. Fire-forming is as simple as turning the necks and shooting, as the factory 6mmBR case will headspace in the AI chamber. Sizing with a 6mm Dasher die with .080″ turned off the bottom is the ticket. Tom Mousel, reigning IBS 1K Champ, “believes this case to have a little wider tune window and far less throat wear”. That means this case might be easier on barrels. For Tom’s 6mm BRA with 28” Krieger barrel, the accuracy node is about 2980-2990 fps, so this gives up only 30-50 fps compared to typical Dasher velocities. Both of Tom’s HG groups held in the 3s for vertical, proving the 6mmBR Ackley’s accuracy potential.
Vapor Trail Bullets and Deep Creek Tracker Stock
Tom Jacobs at Vapor Trail Bullets has been working with a new die for his excellent 6mm 103gr Vapor Trail bullet. Four of the weekend’s competitors were shooting bullets off the new Vapor Trail die. The new die seems to be producing a bullet every bit as good as the old die, maybe even better. Several groups in the 2s (two inch) were shot this weekend. As well as Richard Shatz’s impressive 3.671″ 10-shot group in Heavy Gun (see top of this article).
Finally, the new Deep Creek Tracker 4″-wide stock is becoming a favored option, with half of the competitors at the match shooting these stocks from Wheeler Accuracy. That extra inch in the stock’s fore-end seems to be provide more stability and less rocking on the front rest when opening and closing the bolt. Also, the adjustable tracking rudder makes for perfectly parallel tracking surfaces, an absolute “must have”.
The weekend ended with the sun finally breaking through the clouds. Competitors enjoyed some great grilled Polish dogs with all the fixings prepared by Mark and Angie Candau; who also shot in the match. There were plenty of smiling shooters with awards/prizes for their efforts. It was a great opening match of the season!
Here are the Top Guns at the match: Dave Torgeson, Jim Williams, Jeff Read, Shawn Williams, Richard Schatz, Leo Anderson, Lonnie Anderson, and Tom Mousel.
Deep Creek is one of America’s best 1000-yard shooting centers — many records have been set here.
Note: In this review, James Mock talks about his experience with an IOR Valdada 36X fixed power scope. A newer, slightly-modified version of this optic is now available. The current IOR Valdada 36x42mm scope is just like the scope James reviews, except that the rear ocular lens is slightly smaller and the new version is about three ounces (3 oz.) lighter. All of Mock’s observations and comments otherwise apply to the current production model.
IOR Valdada 36x42mm Benchrest Riflescope
Review by James Mock
For the past eight years I have been using the IOR Valdada 36x42mm Benchrest scope on my 6mm Dasher/6PPC switch barrel rifle. It has performed flawlessly during this time. Perhaps this may be the best 600-yard fixed power scope in existence. With the 1 MOA reticle one can judge the distance from sighter to point of aim very accurately. With this knowledge, he/she can either adjust the reticle to the point of aim or may use the hash marks for a definite aiming point. The 1/8th-MOA adjustments are positive and repeatable. There is a provision to set a “zero” after adjustments.
The lens in this scope may be its outstanding feature. The glass comes from Schott Glass Werkes of Germany, and in my opinion it is as good as one can buy. Another great feature is the spring that is set against the erector tube (this is similar to the system used by the Nightforce BR model). The photo below shows the housing containing that spring.
Reticle Options — Fine Cross-Hair or MOA with Hash Marks
The IOR Valdada 36x42mm scope is offered with a fine cross-hair for those not wanting the MOA reticle. My choice is the MOA reticle with 1/8th-minute dot in the center.
Tested in Competition — This Scope’s a Winner
My first success using this scope was at the NBRSA Nationals at Desoto, Kansas in 2010. I won the 200-Yard Sporter Agg with a .1727. The scope performed flawlessly and I was lucky enough to pull the trigger at the right time. The following year I finished second behind Jeff Thompson III in the Sporter 200 at the NBRSA Nationals at Midland, Texas. Hall of Fame shooter Don Powell commented that my shooting had really improved since I switched to the Valdada. This scope is rock solid and it surely didn’t hurt my shooting.
I have not shot much short range Benchrest in the last few years, but I still use the Valdada in 300- and 600-Yard matches quite often. Its adjustments are crisp and accurate. The adjustments move the reticle 0.125 inches at 100 yards and therefore 0.75 inches at 600. Using the MOA reticle and the precise adjustments, one can determine the number of clicks needed by using the reticle to see how far off of the aiming point one is on the sighting gongs. If a person wants to “hold off” rather than adjust the scope, he/she can do so by using the hash marks for a definite aiming point.
Updates to IOR 36x42mm Scope — Slimmer and Trimmer
Since I got my IOR Valdada 36x42mm scope, there have been some changes made. My scope weighs about 25 ounces but the new one is about 3 ounces lighter. The folks at IOR (Valdada) got input from Bart Sauter and made the ocular (eyepiece) lens smaller and the scope lighter. Bart is now a distributor for Valdada and many in the Benchrest community are now using this fine scope. Billy Stevens won the Super Shoot and qualified for the World Team using the Valdada. If you are interested, please contact Val Leautu in Littleton, CO at 303-979-4578 or Bart Sauter at 270-879-4279.
This stunning flame-painted PPC belongs to Chris from Australia. This rifle features a Stiller Viper action, Speedy (Robertson) BRX stock, and Maddco (Australian) 14-twist barrel chambered in 6PPC.
In our Shooters’ Forum you’ll find a thread in which readers can post photos of their “pride and joy” — their favorite rifle. You’ll find a wide range of guns, from “big boomers” to .17-caliber varminters. Here are some of our favorite entries in the “Pride and Joy” Gallery.
The Bear’s Barbed-Wire Barnard
BarryO, aka ‘the Blue-eyed Bear’, posted his beautiful 6mm Dasher, with its unique barbed wire 3D finish. (There’s a story behind that design.) This rifle was smithed by John King in Montana, with stock bedding work by Leo Anderson. The gun features a Barnard ‘P’ action (with trigger), and 28″ Broughton 5C fluted barrel with VAIS muzzle brake. The Barnard sits in a Tom Manners carbon fiber BR stock decorated with amazing graphics by Mad Shadow Custom Paint.
Sebastian’s Radical Swallowtail 6PPC
Sebastian Lambang is the designer and builder of SEB Coaxial Rests. He’s a smart, creative guy, so you knew when he designed a short-range benchrest stock it would be something special. It needed to be lightweight, yet very rigid. Using “out of the box” thinking, Seb employs a truss-style structure to provide great strength with minimal weight. The rear section is equally radical. There are two splayed “keels” in the rear, forming what this Editor calls a “swallowtail” rear design. Others have called it a “catamaran buttstock.” Below is a side-view of the prototype SEB stock before painting.
Brad’s 6CM Long-Range Match Rifle
Chambered in the 6mm Competition match cartridge, this handsome rig features a Surgeon RSR Action, Bartlein Barrel, and LRB stock. Barrel work was done by Chad Dixon at LongRifles, Inc. and paint by AT Custom Painting.
Varmint Special with Figured Walnut Stock
Here’s a handsome varminter with a beautifully-figured walnut stock. This is one of three rifles Forum Member Dan Hall posted in the Pride and Joy thread.
A Trio of Pealescent Bench Guns
DixiePPC served up not one but THREE pretty bench rigs, all with pearlescent paint jobs. We’d be proud to own three eye-catching rifles like that. Click the image to see a full-screen version.
Zebra-Skinned Match Rifle
And here is Mark Walker’s amazing Zebra-skin BR rifle. With that wild-looking paint job, this rifle turns heads whenever Mark brings it to the range…
This story involves a match held last fall, but we know many of our readers compete in the Mid-Range (600-Yard) Benchrest discipline and follow developments in this sport. Accordingly we’re offering this report on the 2016 IBS Nationals held at the Big Piney Sportsman’s Club in Houston, Missouri.
The 600-Yard Nationals at Big Piney last September was a great event that drew 82 shooters from 14 different states. Competitors traveled from as far away as Florida, Idaho, and North Dakota to compete in the 2016 600-Yard International Benchrest Shooters National Championship. The weather was great and so was the food. A good time was had by all, and shooters praised the facility and the efficient way the match was run. The IBS offers a big “thank you” to everyone involved in running this excellent match. Their hard work and dedication deserves recognition.
On the forearm of this Heavy Gun was painted: “Give Me Liberty or Give Me Death”
Here are the Class Winners at the 2016 IBS 600-yard Nationals in Missouri
The opening morning for Light Gun class proved to be challenging, as the start time was pushed back one hour due to the fog settling in the firing line. By the second half of the eight targets to be shot, shooters began to settle in and take control of the conditions. The Missouri shooters stayed on top with Ben Peters winning light gun score with a 385. Jason Walker took the group win with a 2.008” through 8 targets. With Tom Jacobs, Darrel Dacus, Jim Bauer, and Carrol Lance rounding out the top 5 in Light Gun overall it was going to be a hard fight to the finish.
Click Image to View Larger Equipment List Look at the Caliber Column — Every Top 10 shooter in Light Gun Class shot either a 6mm BR Norma or a 6mm Dasher, an “Improved” version of the 6mm BR. In Heavy Gun it was 9 of 10 (with one unidentified 6.5mm). Hard to beat the 6mm BR and the Dasher for pure accuracy at 600 yards.
This competitor shot the match with a Labradar chronograph on his bench.
On Sunday the Heavy Gun class started right on time with the clouds keeping Saturday’s fog in check. Relay 3 started the day off strong, putting it on top shelf for everyone to follow. The conditions seemed to stay pretty steady and helped create opportunities for competitors to shoot some amazing groups. Tom Jacobs came through with a 1.685 Heavy Gun group Aggregate. Rookie shooters Jim Kowske and TJ Stroop put on great Heavy Gun performances. Jim was second in Heavy gun group with 1.996” and TJ shot his way to second in score with a 384. Jason Walker hung on winning Heavy Gun score with a 389. This set up Jason as the Heavy Gun overall winner.
The Big Piney Range is a pretty facility surrounded by trees.
Jason dominated the weekend landing himself a 2-Gun Overall Championship. The top Rookie honors went to T.J. Stroop. Sally Bauer won the Overall top female. Rory Jacobs was able to seal the top Junior spot. The Big Piney crew would like to thank everyone for being great friends and great competitors! We could not have done it without everyone!
The match organizers provided tasty BBQ banquets for hungry shooters.
Here competitors relax between relays at the Big Piney facility.
We know that many of our readers have never seen a “Hammerhead” benchrest stock before. This is a design with an extra wide section in the very front, tapering to a narrow width starting about 6″ back. When paired with a super-wide front sandbag, the hammerhead design provides added stability — just like having a wider track on a racing car. Some folks think mid-range and long-range benchrest stocks can only be 3″ wide. Not so — IBS and NBRSA rules now allow much wider fore-ends. While F-Class Open rules limit fore-end width to 3″ max, there is not such restriction on IBS or NBRSA Light Guns or Heavy Guns for 600- and 1000-yard competition. Here’s a 5″-wide Hammerhead design from Precision Rifle & Tool (PR&T).
Ray Bowman of PR&T sent us some photos of another hammerhead benchrest rig. Ray reports: “Here’s another benchrest rifle that Precision Rifle & Tool crafted. The customer shot this rifle at the 2014 IBS 1000-yard Nationals in West Virginia.” This IBS Light Gun sports PR&T’s “Low Boy Hammer Head” stock in red/black laminate. Other components are a 6mm BRUX 30″, 1:8″-twist barrel, Borden BR Action, and a PR&T 20 MOA scope rail.
Who hasn’t dreamed of having a professional-quality, permanent shooting bench on their own property? Well here’s an article that can help you make that dream come true. This “how-to” feature from the archives of RifleShooter Magazine shows how to build a quality concrete shooting bench step-by-step.
All aspects of the construction process are illustrated and explained. The author, Keith Wood explains: “Construction happened in three phases — first creating the slab foundation, then the support pillars (legs), and finally the table.”
Click image below to load article with slide show.
Each step in the process is illustrated with a large photo and descriptive paragraph. Starting with framing the foundation (Step 1), the article illustrates and explains the 15 Steps that produce the finished, all-concrete bench (see top photo).
There are still some openings left for the June 2017 Williamsport 1000 Yard Benchrest School. “If you have been considering long range competition, come on out and learn from some of the top shooters in the game. This school will take years off of the typical learning curve.”– Eric Wolfgang, Original PA 1000 Yard Benchrest Club Secretary/Statistician.
Praise from a 1K Benchrest School Grad
Here’s a testimonial from a recent graduate: “I can attest to the knowledge that you gain. I went last year and loved it. Have renewed my membership in the Club and would love to go this year. I would love to take the course again. In the photo above I am in the back row, fourth from the right — sunglasses and blue shirt.” — Bob, Class of 2016
The 10th Annual Williamsport 1000-Yard Benchrest School will be held Saturday June 3 and Sunday June 4, 2017. There are still a few slots available for this year’s session. Classes, taught by top 1K shooters, are held at the Original Pennsylvania 1000-Yard Benchrest Club Range, one of the best 1K ranges in the country. See photos at: www.PA1000yard.com
Participants will learn all aspects of long-range benchrest shooting from some of the most skilled marksmen in the country. Much time is spent at the loading bench and on the firing line. Classes cover load development, precision reloading, bench skills, and target analysis. You don’t even need guns and ammo — all equipment and ammunition will be provided.
School instructors tell us: “This year’s benchrest school will be a 2-day weekend event. (There is also an optional ‘Meet and Greet’ gathering Friday evening). The school is a beginner class designed to teach the fundamental skills needed to be competitive at at 600 and 1000 yards. Saturday will be spent in class covering a range of topics including reloading ‘dos and don’ts’, load development and equipment handling. Sunday we will shoot an actual match to see what you’ve learned.”
Cost for the class is $375.00 including lunches on Sat/Sun and dinner on Saturday. Don’t hesitate if you want to attend the 2017 school. For more INFO email Ray McKinsey, Joe Saltalamachia, or Eric Wolfgang via this Club Contact Page.
Watch Williamsport Benchrest School Slideshow: Please enable Javascript and Flash to view this VideoPress video.
This slideshow was produced by Sebastian Reist an alumnus of the 2009 Williamsport 1000-yard BR school. SEE: www.sreistphotography.com.
We know that many of our readers have never seen a “Hammerhead” benchrest stock before. This is a design with an extra wide section in the very front, tapering to a narrow width starting about 6″ back. When paired with a super-wide front sandbag, the hammerhead design provides added stability — just like having a wider track on a racing car. Some folks think mid-range and long-range benchrest stocks can only be 3″ wide. Not so — IBS and NBRSA rules now allow much wider fore-ends. While F-Class Open rules limit fore-end width to 3″ max, there is not such restriction on IBS or NBRSA Light Guns or Heavy Guns for 600- and 1000-yard competition. Here’s a 5″-wide Hammerhead design from 
The 10th Annual 
