Today’s featured rifle comes from the land Down-Under — Australia. This impressive .300 WSM F-Open rig has top-tier components/accessories from multiple countries. From the USA comes the Borden BRMXD action, Krieger barrel, McMillan Kestros ZR stock, and R.A.D. 2 recoil system. The 10-60x56mm March scope comes from Japan. The Lenzi rear bag is from Italy, and the SEB front rest is from Indonesia, with a Rodzilla top from America. This rifle is brand new, and just had its first competitive test this weekend, emerging with the top 600m Aggregate. By all indication, this .300 WSM F-Open beast is a winner.
Impressive .300 WSM F-Open Rifle from Australia
This rifle belongs to Kris Wilson, aka “Willow” on our AccurateShooter Forum. Just last week Kris posted in the Pride and Joy Rifle thread: “Got my latest build up and running — a .300 WSM F-Open rifle. Never shot a .300 WSM (Winchester Short Magnum) before today and I have to say that, while the recoil is on the sharp side, it’s entirely manageable thanks to the stock design and front rest.” Kris resides in Sydney, New South Wales, Australia and shoots at the Hornsby RSL Rifle Club. He is his club’s current F-Open Champion, even with some very tough competition — his club boasts two Australian F-Open championship-winning club members. Kris loves the F-Class game: “I started rifle shooting in 2015 when I was introduced to the world of F-class through shopping for a riflescope. Once I saw what F-class was all about, I was hooked.”
Kris produced this video on December 5, 2020. He reports: “Here is my first real outing with my new .300 WSM. I had previously sighted in at 50 meters at an indoor range to establish a wind zero. Had a rough idea of velocity so I threw together two loads to run at 600 meters. Our Aussie targets have a max numerical ring value of 6 (equivalent to “10” on USA targets). On Stage One I shot a 60.8X (60.10X max possible), grouping about 3.7 inches. On Stage Two, shown in this video, I shot a a 66.9X (66.11X max possible) with a 3-inch grouping. I took first place in both stages and won the overall Aggregate for the day. That earned me a Christmas ham and turkey for my trouble!”
.300 WSM Rifle Hardware, Cartridge Choice, and Reloading
Report by Kris Wilson, NSW, Australia
Stock: McMillan Kestros ZR with R.A.D. 2 system. 70% black, 15% grey, 15% red.
Action: Borden Rimrock BRMXD, left bolt, right port, left eject. The action is fully DLC coated and fitted with a +20 MOA rail
Trigger: TriggerTech Diamond
Barrel: Krieger 1:10″-twist, 4 groove finished at 31″ and fitted with an Ezell tuner.
Scope: March High Master 10-60x56mm with MTR-1 reticle, illuminated
Rings: ARC M10 High Rings
Front Rest: SEB Mini Rest, with Rodzilla Rest Top system
Rest Feet: Bryan Blake (F-Class Products) adjustable stainless feet
Rear Support: Lenzi (Italy) LR Rear bag, with custom metal base plate
Cartridge Selection — Why the .300 WSM Was Chosen over a 7mm Cartridge
I set out with the goal of building my ultimate F-Open rifle. Now “ultimate” is of course subjective, but I did not want to leave any stone unturned when it came to building a .300 WSM. When researching the equipment for my new build I had a couple of ideas in mind. I was already shooting a 7mm, in the form of a 280AI which had served me well, but I already had plans to switch to a .284 Shehane with the introduction of Peterson .284 Win brass, coupled with the fact Norma stopped making 280AI brass (Note: Peterson now makes 280AI brass). While I was reasonably well-covered with my .284 Shehane, I wanted something with a bit more horsepower to hold up at long range in choppy conditions. A lot of the top guys here shoot 7mm SAUMs but I wasn’t keen on going down that path. Why? For every accurate SAUM I’ve seen, I’ve seen others struggle and given that the 7mm SAUM seems to be particularly hard on barrels, I wanted something that could match the 7mm SAUM ballistically, but have better barrel life.
After plenty of research on AccurateShooter.com, and speaking with some shooters, both locally and in the USA, I decided to give the .300 WSM a go. This cartridge is not particularly popular in Australia for F-Open, primarily because most states enforce muzzle energy restrictions, so pushing the .300 WSM to its potential simply isn’t viable for many shooters here. It IS viable in my home state however, along with the ACT, so I can at least use it in major competitions in two Australian states without having to run at lower nodes where it would otherwise be trumped by the 7 SAUM shooters. I was also attracted to the cartridge through its general design, having a 35-degree shoulder angle similar to the inherently accurate .284 Winchester. I also think the .300 WSM resembles a super-sized Dasher, another devastatingly accurate cartridge. Most .300 WSM shooters report ease of tuning, another key factor I considered.
Choice of Stock, Action, and Barrel
My gunsmith, Matt Paroz (aka MattP on the AccurateShooter Forum) is one of Australia’s top gunsmiths as well as one of Australia’s top F-Open shooters. He knows what it takes to build match-winning rifles. Matt is also an agent for McMillan stocks and I was sold on the Kestros ZR after seeing how it well it tracked — the lower center of gravity it offers cannot be underestimated once you start stepping up in caliber size. I had previously seen a couple of rifles that Matt built for an Australian F-Open team member and I was blown away not only by the quality of the builds, but how well the components worked with one another. I already own a Barnard action, a match-winning action in its own right, but I was desperate to get my hands on a Borden. I liked the fact that Jim Borden times his actions as they leave his factory, so I ordered a BRMXD, left bolt, right port, left eject. I ordered my BRMXD fully DLC-coated, for both longevity and aesthetics.
I opted for a TriggerTech Diamond trigger which has been timed to the action and offers a level of crispness the factory Barnard trigger cannot replicate. The synergy between action and trigger is just superb. I managed to get my hands on a 10-twist, 4-groove Krieger barrel that looks like a winner so far. Finished at 31″, this barrel has been super-easy to tune so far, with Berger 215gr hybrids showing very good promise. NOTE — Overall the rifle comes in 500 grams (1.1 lbs.) below F-Open max weight, so the next barrel will probably finish at 32″.
The barrel sports an Ezell tuner. I don’t touch the tuner until I’ve sorted my load and bullet seating depth. The tuner just affords me that extra flexibility in tightening up an already good grouping. At the end of the day, like any competitive shooter, I’m chasing tight vertical and horizontal, something which will run inside 1 MOA at 1000 yards. If I drop a shot, I want it to be my fault, not the rifle’s.
About my optics choice — when the chance to own a March High Master came up, I didn’t think twice. I have used March previously and got a sneak peek through an original High Master prototype which was doing the rounds in Australia. With superb image quality, it left a lasting impression. March has built up an excellent following and reputation in Australia, and so far I have to say it was money well spent. The March is held in place with a set of beefy ARC M10 rings.
The rest of my F-Open setup includes a modified SEB Mini up front, with a Rodzilla Rest top and Bryan Blake adjustable feet. I chose the SEB Mini because it has a wide, stable footprint but relatively light weight. That makes the Mini easier to transport. At the rear I use an extremely well-crafted Lenzi LR bag which sits on a custom rear plate. This heavy combination keeps things nice and planted. That aids in straight tracking.
Reloading for the .300 WSM — Process and Die Choice
When it comes to reloading, I keep it simple and don’t over-think things. I use Norma .300 WSM brass. I ensure case mouths are always deburred on the inside and out but I do not neck turn. I am set up to turn necks with a 21st Century unit, but after neck turning previously for a 6mm SLR, I just didn’t see a noticeable benefit in doing so. I always full length re-size after firing and prefer bushings, generally opting for .002″ of neck tension on anything I shoot. So far it seems to be working. With my .300 WSM I run a Redding Type-S full-length bushing die with a .335 bushing. A loaded round comes in at 0.337″ across the neck and I opted for a no-neck turn reamer which comes in at 0.343″, so there’s plenty of clearance. I use a Forster micrometer seating die. I prefer the feel of the Forster and I use Redding dry lube media to assist in smooth bullet seating.
Reloading room with MEC single-stage press on left and AutoTrickler with Force Restoration Scale on right. Note there are plenty of bullets — Kris got his supplies before the shortage.
I use an AMP Annealer and anneal after every firing. Powder charges are measured and dropped with a V3 AutoTrickler and A&D FZ500i scale. The 215gr Berger Hybrid seemed like a pretty good place to start as far as bullet selection. I point them with a Whidden bullet pointing die. Powder options can sometimes be a contentious choice and if you’re lucky you’ll get a couple of powders which will work well in any given barrel. For my .300 WSM I use Alliant Reloder 23. It is very temp-stable. My primer of choice is S&B Standard Large Rifle Primers. How does it all come together? The first nine shots through the barrel while zeroing the scope resulted in an ES of 17 and SD of 6 — promising signs for a light initial load of 63 grains.
First Test in Competition — Kris Earns Victory at 600m with his .300 WSM
The first real test came after only 19 rounds had gone down the barrel. My local range and district had its annual Christmas shoot with Christmas hams and turkeys awarded to discipline winners. I was up against a decent field with two members from the Australian F-Open team running against me — one sporting a .284 Win and the other a 7mm SAUM. I ran two different loads using Reloder 23. I was hoping to be in the vicinity of 2920 fps with my pointed Berger 215gr hybrids. What made this a bit harder was not being able to run my LabRadar prior to the shoot. Based on user comments on the 215gr hybrids, I jumped them 20 thousandths, hoping they would hold together and not end up with a shotgun grouping on target.
My first sighting shot at 600 meters was a 4 which landed high, but windage was good. I wound down 1 MOA and the second sighter was a 5. My first scoring shot was an X. I proceeded to shoot clean, scoring a 60.8X (100.8X on a USA target), with the group measuring 3.7 inches. Quite a good start for shots 20-31 through the barrel! For Stage 2, we were only allowed one sighter with 11 shots to count (66.11 max possible). I knew my second load was a touch higher so I came down several clicks, and my first sighter was an X. This second stage load grouped tighter, shooting clean again with a 66.9X, with 11 shots in 3 inches. That was good enough to take first place in both stages and win the overall Aggregate for the day. See HEXTA target screen capture below. American readers take note — a SIX in Australia is the same as a TEN in your USA system.
Suffice to say I was very pleased with how things turned out! Despite the bigger bang this rifle makes, the Kestros ZR and R.A.D. 2 system made it remarkably compliant. The recoil is sharp but the R.A.D. system just takes all the sting out of it — it reminded me of shooting my old 280AI in terms of felt recoil. I was able to get back on target with a minimum of fuss and didn’t find the rifle fatiguing at all, so it gets a massive thumbs up from me. This just illustrates how important component selection and rifle set-up is to the overall experience. Going home with a Christmas ham and Turkey was an added bonus!
CONCLUSION — The .300 WSM is Very Effective for F-Open
With recent trends in F-Open equipment, such as rifle stock technology making a lower center of gravity possible, bigger F-Open options such as the .300 WSM are now quite manageable. That’s not to say this caliber is a pussy cat — it definitely kicks more than the .284s out there. But with my choice of components, the recoil is manageable and the R.A.D. 2 system takes the sting out, so I’m not left nursing a sore shoulder at the end of a stage. The rifle is off to a very positive start so far but I know it’s capable of more. The lead up to Christmas will keep me busy fine-tuning a load in time for the NSW State Title match to be held in late January 2021. With COVID-19 halting most competitive shooting in Australia in 2020, this 2021 NSW competition is sure to prove popular. I intend to have my .300 WSM rifle humming in time for it.
Kris Wilson (NSW, Australia) Talks About Competitive Shooting
When I was introduced to F-Class shooting, I was fascinated with the level of accuracy shooters were obtaining with their rifles and it was something that just drew me in. Since then it has been a gradual learning curve, not to mention the fact everyone I have met has been super friendly and willing to share their knowledge. The shooting fraternity is a great community to be part of…. Mixing it with Australia’s best is what drives me right now.
For the past two years I have taken competition more seriously as I hope to represent Australia in the future. In my first Nationals match in 2019, I finished 15th out of 30 F-Open shooters. I then finished 7th in the 2019 NSW State Championships, with every shooter above me having been a state or national championship winner, including current F-Open world champion Rod Davies. 2020 has been different due to COVID-19 — unfortunately many of Australia’s state championships and prize shoots were cancelled. But I’ve been working hard to maintain my skills and the new rifle is motivation. As reloading equipment and rifle components continue to improve, it’s a great sport which encourages learning and provides many opportunities to keep improving your shooting.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA — Hunting Gear — 29% to 56% Off
⏺ Get gear for your annual hunt while saving big
Hunting season is here. Grab those extra gear items you need before you head out into the backwoods on your hunt. At MidwayUSA you’ll find great hunting items at bargain prices right now. As shown above, here are some of our top hunting gear picks:
⏺ Many popular std and magnum calibers, awesome deal includes Vortex scope
Hunters take heed — with this deal you can grab a new deer rifle, complete with mounted Vortex scope, for under $350.00! Kentucky Gun Company is offering Thompson Center (T/C) Compass bolt-action rifles in .223 Rem, .243 Win, 6.5 Creedmoor, 7mm Rem Magnu, .308 Win, .30-06 Sprg, or .300 Win Magnum for only $396.97 (cash/check). That’s a killer deal by itself, but these rifles now qualify for a Thompson Center $50 Rebate. That lowers your net cost to just $346.97!
3. Bullet Central — Berger Bullets in Stock
⏺ Good prices on high-demand target bullets from Berger
With concerns over social disorder, reloading components have been harder to find. For you match shooters looking for quality bullets, head over to BulletCentral.com. There you’ll find a large selection of Berger target bullets in stock. Not only does Bullet Central has a large supply of Berger bullets, but the prices are about as low as you can find now. That’s a win-win.
4. Amazon — Vortex Diamondback HD Spotting Scope, $399.00
⏺ Great Spotting Scope Deal — hard to beat at twice the price
Whether hunting or target shooting, spotting scopes get you on target faster and easier than bare eyes or riflescope. If you need a good HD-grade spotter, check out the Vortex Diamondback HD 16-48x65mm angled spotting scope for $399.00. It offers great clarity and rock-solid lifetime guarantee. Relatively compact and weighing 49.8 ounces, this is a good choice for a hunter. There’s also a straight version for $399.00, with same 16-48X power and 65mm objective. If you need more magnification and low-light performance, Vortex offers the 20-60x80mm Diamondback HD spotter for $499.00.
5. Natchez — Big Savings on Nikon Hunting and Tactical Scopes
⏺ Incredible prices on a wide variety of FFP and SFP rifle scopes
Do you need a reliable scope with good controls and sharp glass, but you’re on a tight budget? Check out the Nikon scope sale at Natchez. You will find a wide variety of hunting and tactical scopes. Select the magnification level for your discipline. For PRS, you can save big on excellent FFP MRAD FX1000 scopes. There are also small AR scopes on sale. NOTE: Shown above are just three of the Nikon scopes on sale. There are dozens of other models and configurations discounted 30% to 60%, with 40% savings typical.
6. Midsouth — Norma .223 Remington Brass, $99.99 for 250
⏺ Impressive deal on very high quality .223 Rem brass
After Lapua, Norma makes some of the best brass you can buy. And here’s a chance to get a big supply of .223 Rem brass for your High Power or varmint rifle. This 223 Remington brass has very tight tolerances, holds up well to multiple reloads. We have seen very good accuracy with this brass with both light and heavy .224-caliber bullets. The price — $99.99 for 250 cases, works out to $0.39 per case. You can pay up to $0.70 per case for some other premium .223 Rem brass.
⏺ Take advantage of Browning Bucks Rebates up to $100
Browning makes excellent rifles, shotguns, and pistols. The Browning Buckmark is one of our favorite .22 LR rimfire pistol, and Browning Citori shotguns are renown for their build quality and performance. Right now CDNN Sports is discounting a wide selection of Browning Firearms. And now through the end of September 30, 2020, you can a Browning Bucks rebate — up to $100.00 on Citori shotguns. The rifle rebate is $50, while the pistol rebate is $25.00. Act soon before the rebate expires on 9/30/2020.
8. MidwayUSA — Pro Series Competition Shooting Mat, $32.99
⏺ Very high quality mat for the price — big discount
The MidwayUSA Pro Series Competition Shooting Mat is now on sale for just $32.99, 40% off the basic price. The Pro Series mat measures a full 73.5″ x 35.5″. Zippered pockets on the front flap hold ammo or log books. And there are webbing “pockets” for bipod feet so you can pre-load your bipod with forward pressure. This quality mat boasts 0.35″ thick padding, multiple pockets, 6 grommets for staking, and a nice carry strap. It’s easy to transport, rolling up to about nine inches in diameter. User reviews of this $32.99 Shooting Mat have been very positive.
9. Grafs.com — Peregrine MAGnet Gun Caddy, $5.99
Here’s a handy low cost item that can hold your rifle vertically on any steel surface. This works great on gun safes (outside or inside), and the MAGNet Gun Caddy can be used on vehicles too. The patented design makes it possible to secure and remove your gun from the holder with just one hand. The $5.99 MAGnet Gun Caddy is modular so you can arrange multiple units at whatever height works best. If your safe interior is carpet-lined, use the supplied Velcro to hold the MAGnet caddy in place.
If you buy one book about Long Range Shooting, this should be it. Based on sophisticated testing and research, this 356-page hardcover from Applied Ballistics offers important insights you won’t find anywhere else. Modern Advancements in Long Range Shooting – Volume II, the latest treatise from Bryan Litz, is chock full of information, much of it derived through sophisticated field testing. As Chief Ballistician for Berger Bullets (and a trained rocket scientist), author Bryan Litz is uniquely qualified. Bryan is also an ace sling shooter and a past F-TR National Champion. Moreover, Bryan’s company, Applied Ballistics, has been a leader in the Extreme Long Range (ELR) discipline.
AUDIO FILE: Bryan Litz Talks about Modern Advancements in Long Range Shooting, Volume 2. (Sound file loads when you click button).
Volume II of Modern Advancements in Long Range Shooting ($39.95) contains all-new content derived from research by Applied Ballistics. Author Bryan Litz along with contributing authors Nick Vitalbo and Cal Zant use the scientific method and careful testing to answer important questions faced by long range shooters. In particular, this volume explores the subject of bullet dispersion including group convergence. Advanced hand-loading subjects are covered such as: bullet pointing and trimming, powder measurement, flash hole deburring, neck tension, and fill ratio. Each topic is explored with extensive live fire testing, and the resulting information helps to guide hand loaders in a deliberate path to success. The current bullet library of measured G1 and G7 ballistic coefficients is included as an appendix. This library currently has data on 533 bullets in common use by long range shooters.
Bryan tells us that one purpose of this book is to dispel myths and correct commonly-held misconceptions: “Modern Advancements in Long Range Shooting aims to end the misinformation which is so prevalent in long range shooting. By applying the scientific method and taking a Myth Buster approach, the state of the art is advanced….”
Bullet Dispersion and Group Convergence
Part 1 of this Volume is focused on the details of rifle bullet dispersion. Chapter 1 builds a discussion of dispersion and precision that every shooter will benefit from in terms of understanding how it impacts their particular shooting application. How many shots should you shoot in a group? What kind of 5-shot 100 yard groups correlate to average or winning precision levels in 1000 yard F-Class shooting?
Chapter 2 presents a very detailed investigation of the mysterious concept of group convergence, which is the common idea that some guns can shoot smaller (MOA) groups at longer ranges. This concept is thoroughly tested with extensive live fire, and the results answer a very important question that has baffled shooters for many generations.
Part 2 of this Volume is focused on various aspects of advanced hand-loading. Modern Advancements (Vol. II) employs live fire testing to answer the important questions that precision hand loaders are asking. What are the best ways to achieve MVs with low ES and SD? Do flash hole deburring, neck tension, primer selection, and fill ratio and powder scales sensitivity make a difference and how much? All of these questions are explored in detail with a clear explanation of test results.
One of the important chapters of Part 2 examines bullet pointing and trimming. Applied Ballistics tested 39 different bullet types from .224 through .338 caliber. Ten samples of each bullet were tested for BC in each of the following configurations: original out of the box, pointed, trimmed, pointed and trimmed. The effect on the average BC as well as the uniformity in BC was measured and tabulated, revealing what works best.
Part 3 covers a variety of general research topics. Contributing author Nick Vitalbo, a laser technology expert, tested 22 different laser rangefinders. Nick’s material on rangefinder performance is a landmark piece of work. Nick shows how shooters can determine the performance of a rangefinder under various lighting conditions, target sizes, and reflectivities.
Chapter 9 is a thorough analysis of rimfire ammunition. Ballistic Performance of Rifle Bullets, 2nd Edition presented live fire data on 95 different types of .22 rimfire ammunition, each tested in five different barrels having various lengths and twist rates. Where that book just presented the data, Chapter 9 of this book offers detailed analysis of all the test results and shows what properties of rimfire ammunition are favorable, and how the BCs, muzzle velocities and consistency of the ammo are affected by the different barrels.
Chapter 10 is a discussion of aerodynamic drag as it relates to ballistic trajectory modeling. You will learn from the ground up: what an aerodynamic drag model is, how it’s measure and used to predict trajectories. Analysis is presented which shows how the best trajectory models compare to actual measured drop in the real world.
Finally, contributing author Cal Zant of the Precision Rifle Blog presents a study of modern carbon fiber-wrapped barrels in Chapter 11. The science and technology of these modern rifle barrels is discussed, and then everything from point of impact shift to group sizes are compared for several samples of each type of barrel including standard steel barrels.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA — Vortex Viper Scope Scale, under $300
⏺ Huge discounts on Vortex Vipers with lifetime warranty
Need a scope for that hunting rifle or varmint rig? Here are two great deals on quality Vortex Viper scopes. For a deer rifle choose the 2.5-10x44mm Viper HS scope priced at just $249.99 — a 39% savings. This scope weighs just 16.5 ounces — that’s important on a hunting rig you’ll carry all day long. For varminting duties, where you need more magnification, there’s a 6.5-20x44mm Vortex Viper on sale for just $299.99, that’s 30% off. Either way you get a good scope with superb Vortex lifetime warranty for under $300.00.
2. Bullet Central — Berger Bullets in Stock
⏺ Good prices on high-demand target bullets from Berger
With concerns over social disorder, reloading components have been harder to find. For you match shooters looking for quality bullets, head over to BulletCentral.com. There you’ll find a large selection of Berger target bullets in stock. Not only does Bullet Central has a large supply of Berger bullets, but the prices are about as low as you can find now. That’s a win-win.
Who doesn’t love a good waterfowl hunt? It’s a great outdoor escape that can put food on the table. Right now Sportsman’s Warehouse is offering a quality waterfowl shotgun at a great price. The Winchester SXP Waterfowl Hybrid Hunter in 12ga or 20ga is on sale now for just $354.99. These well-made, 3-1/2″-shell-capable shotguns feature an ultra-tough Mossy Oak and Permacote protective finish.
⏺ Wireless photos and videos, good controls, USB Charging
In the quest for better borescope performance, manufacturers are improving their electro-optics offerings. At the forefront is Lyman, the company that pioneered the affordable, digital borecam. Lyman has released its new Borecam PRO 24″ wireless borescope. This boasts wireless WiFi operation, 720P resolution for sharp images, and adjustable light intensity. The BoreCam Pro has a 24″ long rod that will fit all .20 caliber and larger-diameter barrels. The Borecam PRO takes photos and video with the push of a button and has easy to use Apps for iOS and Android mobile devices.
5. Amazon — WIREGEAR Gunsmith Punch Set, $39.99
⏺ Versatile punch set performs multiple gun tasks
When working on firearms and removing or assembling component, you definitely need a good set of precision punches to keep from damaging anything. We found this great WIREGEAR Gunsmith Punch Set that even comes with a punch block too. With this punch set you can feel confident that you can remove any pin without harming your finish or damaging holes.
6. Palmetto State Armory — Taurus G2c 9mm Pistol, $299.99
⏺ Good CCW 9mm carry pistol for under $300.00
Right now compact 9mm carry guns are in very high demand. Many gun vendors have limited inventory and have raised prices. Here’s a good little compact carry gun at an attractive price — half what you might pay for a 9mm Glock 19 these days. Palmetto State Armory has the black-on-black Taurus 9mm G2c for just $184.99. This affordable 9mm handgun is a true compact, 6.25″ OAL, and weighing just 21.2 oz. unloaded. Despite its small size, the G2c has a 12-round magazine. We like the fact it has a left-side manual safety (unlike the Glock).
7. Graf & Sons — MTM Promotion FREE Patch Catcher
⏺ Buy $40 of handy MTM containers, get FREE Patch-Catcher
Right now, if you buy at least $40 of MTM products at Grafs.com you can get a FREE MTM Patch Catcher or Hat. The patch catcher is great and allows you to keep all your soiled patches off your bench or table and easily throw them away. Trust us, you’ll find it easy to get your money’s worth for the $40 purchase — MTM makes high quality ammo carriers, range boxes (with cleaning cradles), pistol storage boxes, ammo crates, cleaning rod carriers, bore guides, and compact rests. We use and recommend MTM range boxes and MTM ammo carriers.
⏺ Inexpensive, ultra-lightweight gun support — good for sight-in or ARs
If you’re tired of carrying heavy sandbags to rest your guns, consider a new alternative. The BenchMaster Weapon Rack XBlock Gun Rest costs less than $20 and weighs just 7.1 ounces! Sized 8″ x 6″ x 4″, it can be used in multiple ways to support your firearms. Made from lightweight, high-density foam, this rest is impervious to moisture and mildew. This XBlock is a good inexpensive option for sighting in a deer rifle before your annual hunt. Or keep an XBlock behind your truck seat as an “anytime” rest. BenchMaster also makes an adjustable 3-section Bench Block Gun Rest ($27.99) that works well with ARs.
9. Amazon — Hornady One Shot, $9.99
⏺ Dry-Film Lube — not sticky, easy to apply, used by top shooters
If you’re looking for a mess-free way to lube cases before sizing give Hornady One Shot a try. Get 7 oz. can for $9.99, or 14 oz. can for $13.99. It’s easy to apply and leaves a grease-free, friction-reducing film that works great for full-length case sizing. Here’s a good video that shows application methods with tips to ensure great results with your brass.
Here’s good news for PRS/NRL shooters, and factory-class competitors at local bench and varmint matches. Berger is now offering factory-loaded ammunition with Lapua brass and Berger’s outstanding, match-proven Long Range Hybrid Target™ (LRHT) bullets. This new loaded ammo is offered for the 6mm Creedmoor and 6.5 Creedmoor cartridges. Get the 109gr LRHT bullet in 6mm Creedmoor, or choose a 144gr or 153.5gr LRHT bullet in 6.5 Creedmoor.
Berger Long Range Hybrid Target ammunition features Berger’s high-BC, LRHT bullet, which is Doppler Radar-verified to less than 1% BC variation. LRHT ammo is assembled with Lapua cartridge cases and clean-burning, temperature insensitive propellants. These Berger cartridges are meticulously constructed to exacting tolerances — you will be pleased with the accuracy and low ES numbers.
Berger Long Range Hybrid Target™ Ammunition is available now in these offerings:
6mm Creedmoor 109 gr LRHT | 6.5 Creedmoor 144 gr LRHT | 6.5 Creedmoor 153.5 gr LRHT
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Cabela’s — Bergara B-14 HMR, $949.99
⏺ Good Ergonomics, Works for Hunting plus PRS Factory Class
Bergara rifles offer excellent value for the money. They combine accuracy, good ergonomics, and smooth function at a lower costs than many other brands. If you’re looking for a new rifle that’s capable of hunting, PRS competition, or target shooting, check out the Bergara B-14 HMR now on sale. Available in 6.5 Creedmoor or .308 Win for $949.99, the B-14 HMR features a quality synthetic stock with adjustable cheek-piece. The 24″ barrel has a threaded muzzle, so you can add a muzzle brake or suppressor.
2. Amazon — Frankford Arsenal Perfect Seat Priming Tool, $69.79
⏺ Precise Depth Control, 12 Shell Holders, Quick-Change, Carry Case
Seating primers to a consistent depth helps deliver enhanced accuracy and low ES/SD. However, most priming systems don’t allow precise depth control. If you’re looking for a priming tool that allows you to adjust primer seating depth, check out the Frankford Arsenal Perfect Seat Hand Primer. This tool comes in a protective case along with a full set of case holders and primer flip tray. A quick thumb release system allows you to switch from small to large primers quickly.
3. Precision Reloading — H4350 and Reloder 16 in Stock
⏺ Great Temp-Stable, Match-Grade Powders in Stock
The most popular powders, such as H4350 and Reloder 16, can be hard to find. But we’ve located these outstanding temp-stable powders at two leading vendors. Right now Precision Reloading has both Hodgdon H4350 (1-lb and 8-lb) and Alliant Reloder 16 (1-lb) in stock. In addition, Powder Valley has popular H4350 in stock (1-lb and 8-lb). These powders are both great choices for 6.5 Creedmoor, .284 Win, and other match cartridge types.
4. Graf & Sons — 25% Off All Sightron Scopes
⏺ Great 25% Sale! Sightrons Rival Optics Costing Hundreds More
Need a high-quality optic for your match rifle or hunting rig? Looking for a specialized “big wheel” scope for Field Target airgun competition? Sightron offers a wide range of quality scopes at affordable prices. And now the deals are even better. Right now Grafs.com is offering 25% Off ALL Sightron scopes in stock. This sale is good through 11:59 pm CT on July 10, 2020.
5. Amazon — Lyman Xpress Case Trimmer, $114.99
⏺ Great Tool — EZ Length Adjust, Variable Speed, Carbide Cutter, 10 Bushings
Trimming cases to length is a critical for precision reloading. Unfortunately, many trimmers are inefficient and/or clunky. If you want a fast, easy, and precise way to trim brass look no further than the Lyman Xpress Case Trimmer. This boast a super-sharp carbide cutter head plus a variable speed control. The unit ships with 10 shoulder bushings to cover most cartridge types. The carbide cutter trims fast and clean.
6. Amazon — Teslong Rod-Type Digital Borescope, $79.99
⏺ Handy Rod Borescope with Sharp Digital Images and Video
Teslong digital borescopes have been a huge success and earned high praise from our Forum members. First there was the cable-type plug-in model, then a Wifi Teslong that works with all types of mobile devices. The latest Teslong features a metal shaft, with length markings. This makes it easier to inspect your bore with precision. This compact, electro-optical, Rod-type Borescope ($79.99) outputs sharp, high-rez images and VIDEO to desktop computers, laptops, as well as Android tablets and smartphones.
7. Amazon — Frankford Arsenal or Lyman Brass Tumbler Sale
⏺ Great Sale Pricing, Choose Lyman or Frankford with Clear Top
⏺ Huge Discounts on Weaver Tactical, Hunting, and Competition Optics
Weaver scopes have always been a top optics option. Weaver offers models for just about any discipline. If you’re in the market for a new scope check out the amazing Weaver Scope Blowout SALE at Natchez. Natchez has a good assortment of quality Weaver scopes at crazy low prices up to 55% off. NOTE: There may be changes in Weaver scope production. Contact Bushnell for ongoing warranty policies.
9. Brownells — TriggerTech Trigger Sale
⏺ Good Selection for ARs and Rem-Compatible Bolt Guns. Save 25-35%
TriggerTech makes quality trigger with crisp breaks and adjustable pull weights. With a protectice housing, tThese triggers are very resistant to dirt and debris. If you’ve been looking for a new trigger, check out the TriggerTech Trigger Sale at Brownells. There are substantial discounts. For example the AR15 Independence trigger is discounted from $229.99 to just $149.99 — a 35% savings.
10. Midsouth Shooters Supply — Berger Ammo Sale
⏺ True Match-Grade Factory Ammo with Lapua Brass and Berger Bullets
Berger Bullets is a renowned bullet-maker. But did you know Berger makes loaded ammunition as well? Available in many calibers for both hunting and target shooting, Berger ammo is a great choice for those who want quality without hand-loading. Midsouth Shooters is running a Berger Ammo Sale. You’ll find 6.5 Creedmoor, .260 Rem, .308 Win, .300 Win Mag, .338 LM and other popular types. This ammo shoots great — check out this Berger 6.5 Creedmoor Ammo Test.
Is factory 6.5 Creedmoor ammunition good enough to win a PRS or NRL competition? The answer is a resounding “YES” if we’re talking about Berger ammunition. Produced with Berger match bullets and premium Lapua brass, this Berger 6.5 ammunition demonstrated excellent accuracy, impressive velocity, and very good ES/SD numbers. When tested at 1000 yards with an MPA-stocked PRS rig with Rem 700 action, this ammo showed just half-MOA of vertical, and produced a group that would have been a 50-1X in F-Class competition. That’s quite impressive for a PRS rig.
This ammo test was performed by our friend Erik Cortina from Texas. Erik is a top F-Class competitor who also shoots tactical matches (for fun and glory). Erik recently built a new 6.5 Creedmoor with a Remington 700 action. Though this rifle sports a top-shelf MPA chassis and premium Kahles scope, Erik calls this his “budget build” because it has a plain Rem 700 factory action rather than the elite Borden actions he normally runs. Erik’s actions of choice are the Borden Mountaineer for PRS and Borden BRM-XD for F-Class.
Erik posted: “Shot my budget 6.5 Creedmoor today with Berger Bullets factory ammo. I shot five rounds over the chrono to get speed. I used BC info from the box and it all lined up properly. I adjusted my ECTuner to tune load and it took just 15 shots to get it shooting well. It’s simple with good components.”
This Berger factory ammo features Berger 130gr Hybrid OTM Tactical bullets. The Lapua 6.5 Creedmoor cases have a large rifle primer. You can see this ammo displays good velocity with Extreme Spread and Standard Deviation rivaling good hand-loads.
Cortina says the very accurate Brux barrel and razor-sharp 6-24x56mm Kahles scope help achieve this kind of outstanding performance at 1000 yards. Here are the key components for Erik’s latest PRS rig:
Barrel Tuner by Erik Cortina — Fits Behind Muzzle Brake
This rifle features a barrel tuner designed and crafted by Erik Cortina. You can the ECTuner alone, or, as you can see, the ECTuner can be fitted BEHIND a muzzle brake. Erik tells us: “The ECTuner allowed me to tune the barrel to my ammo rather than tuning the ammo for barrel as is done when reloading. With the tuner, there is no need to try different brands of ammo as they can all be tuned to shoot as good as possible in my rifle.”
MPA Chassis Configuration Guide
Erik’s “budget” PRS rifle employs a MasterPiece Arms (MPA) BA Competition Chassis with Rapid Adjustment Technology (RAT). This MPA Arms Video shows how to set up an MPA Chassis to suit the owner:
The 6.5 Creedmoor is now one of the most popular cartridges chambered in factory rifles. It found favor among hunters and PRS competitors, but then its little brother the 6mm Creedmoor became widely adopted because the 6mm version delivered less recoil, equivalent or better ballistics, and lower bullet cost.
Now there’s a new Creedmoor kid on the block, the 22 Creedmoor. While this certainly can be used for PRS and tactical competition, the 22 Creedmoor seems to be ideally suited as a high velocity varmint round — something to replace the 22-250. You get 22-250 class velocities with a more modern cartridge design, and high-quality brass.
LEARN MORE about the 22 Creedmoor
There is an excellent write-up in the GunsAmerica Digest about the 22 Creedmoor cartridge. Reviewer Jeff Cramblit built a 22 Creedmoor rifle and tested it with a variety of bullet weights. He concluded it worked best as a varminter, but could also do PRS duty, provided it is loaded under the 3200 fps velocity limit common in PRS matches. CLICK HERE to read full GunsAmerica 22 Creedmoor test report.
Since there is not yet a SAAMI spec for the 22 Creedmoor, the cartridge is officially still a wildcat. However some ammo-makers are producing 22 Creedmoor loaded ammo right now: Copper Creek, Gunwerks, and Spark Munitions. We expect Hornady and possibly Federal might also produce loaded ammo in the near future. Currently Cooper Creek has the most 22 Creedmoor loaded ammo varieties, with 17 different bullet options from 60 grains to 95 grains. Copper Creek also offers load development packs with either Alpha or Hornady brass. Here are five Cooper Creek options with Sierra and Berger bullets:
In addition, multiple companies are now selling 22 Creedmoor cartridge brass: Alpha Munitions, Atlas ADG, Hornady, and Peterson Cartridge. The Peterson 22 Creedmoor brass is excellent.
Of course you can neck down high-quality Lapua 6mm Creedmoor brass. Lapua brass has outstanding consistency and durability. Choose from large primer or small primer types. Necking down is a simple one-step operation with a neck-sizing or full-length sizing die.
22 Creedmoor Brass from Peterson Cartridge
According to Derek Peterson, President of Peterson Cartridge, “We decided to build the tooling to make our .22 Creedmoor brass in response to the uptick in long-distance predator and varmint hunting. Plus the round is just straight-up fun to shoot. It is a low-recoil, flat shooting, wind-bucking round [that is] deadly accurate up to 800 yards.”
“When we designed the tooling for the .22 Creedmoor we set out to make casings with improved features”, Peterson added. “And we were successful. We increased the head hardness to tolerate higher pressures. And we increased our internal volume slightly to work better with the slow-burning powders [such as Reloder 26 or H1000].”
22 Creedmoor for Varmints — Video from the Varmint Fields of Eastern Oregon
Bullet Choices for 22 Creedmoor
If you have an appropriate twist-rate barrel, you can load the 22 Creedmoor with heavy 85-95 grain bullets. However, we think that the cartridge is better suited for lighter 65-80 grain bullets. This yields high velocities that provide explosive impacts on small varmints.
This GunsAmerica photo shows, L to R, 90gr Sierra MK, Hornady 88gr, 80gr, and 75gr .224 caliber bullets.
What is the Best Role for the 22 Creedmoor?
GunsAmerica tester Jeff Cramblit favors the 22 Creedmoor as a varmint round: “The performance of the 22 Creedmoor with 75-80 grain bullets makes it an outstanding varmint cartridge. I’ve seen claims of 80 grain Bergers at 3500 fps out of 26″ barrels, which would be devastating on any varmint. Loaded ammunition is available with bullets in the 70-75 range leaving 24” barrels at velocities around 3400+ fps, a bit more conservative than personal hand-loading, but still making it a very flat shooting, low recoiling round delivering impressive results.”
Jeff says the 22 Creedmoor will also work for PRS with heavier bullets: “I built the 22 CM to be a dual-purpose gun, or actually a 3-purpose gun. The first was for the coyotes and varmints previously mentioned. The second was for shooting PRS (Precision Rifle Series) style matches on occasion, and the third was for hunting deer-sized game. As with any multi-purpose tool there tends to be compromises.”
Berger Ballistics Experts in 10-Part Podcast Series
Berger Bullets is presenting a 10-part Podcast series on bullet design and ballistics. Bryan Litz and Emil Praslick III are the featured guests for a 10-part Sniper’s Hide Podcast series about Ballistics. These 10 Podcasts aredelivered through The Everyday Sniper podcast platform. The series will help listeners learn more about Ballistic Coefficients (BCs), why BC consistency is important, and how BC effects both accuracy and precision.
In this 10-part series, Bryan Litz of Applied Ballistics and Wind Wizard Emil Praslick talk with Sniper’s Hide head honcho Frank Galli. Along with Ballistics, the 10 podcasts will cover a variety of shooting-related topics including: long range shooting, precision rifle builds, training, wind effects, industry updates, and more. The key features of the podcasts are also explain in print articles by Bryan Litz found at BergerBullets.com/NoBSBC.
How and Why Bullet BC Varies with Velocity
Podcast Episode 2 focuses on how Ballistics Coefficients Vary with Velocity and why that matters. Listen to Berger Chief Ballistician Bryan Litz and Mil/LE Tactical Expert, Emil Praslick, talk shop about bullet design, modern BC measurement techniques, and the importance of BC consistency for long-range precision and minimal vertical dispersion. READ Bryan Litz BC Variation Analysis HERE.
The 10-part podcast series kicked off May 1, 2020. Each podcast is an in-depth discussion of Berger’s bi-weekly “No-BS BCs” ballistics articles, authored by Bryan Litz, Berger’s Chief Ballistician. In Episode One, linked below, Litz defined BC and its purpose. As the series continues, the experts explain why BC consistency is the most important factor in long-range bullet performance. Learn more about “The Everyday Sniper” BC podcast series at NoBSBC.com.
“This is a great opportunity to open up our platform to Berger with Bryan and Emil. Giving people this kind of access through the partnership is a Masterclass opportunity for anyone interested in long range shooting”, stated Frank Galli.
Podcast Schedule and Topics
To learn more about Berger’s No-BS BCs and to read Bryan Litz’s bi-weekly articles, visit NoBSBC.com and Bergerbullets.com.
The best F-Class and Sling shooters in the nation compete each year at the Berger Southwest Nationals at the Ben Avery range in Arizona. Walk down the firing line and you’ll see the absolute “best of the best” in equipment — from $3500 optics to $2000 stocks and $400 triggers. Berger SWN shooters have some of the best equipment you can buy. In this game, where just 1 or 2 points can separate first from third place (considering X-Count), it’s important to have top-flight equipment. That means a custom action, custom barrel, and high-end stock or chassis system.
Matt Schwartzkopf, a range supervisor at Ben Avery, and member of the USA F-TR Team, has collected comprehensive gear reports from the 2020 Berger SW Nationals. Matt has created charts showing competitors’ choices for Actions, Barrels, Stocks, Riflescopes and Spotting Scopes. In addition, Matt has compiled bullet choice data for all classes and Cartridge rankings for F-Open Division.
There is a discussion of the 2020 SWN Gear Selection in our Shooters’ Forum. CLICK HERE to follow that Forum thread. Many top SWN shooters, including past F-Open National Champion Larry Bartholome, have contributed to this Forum discussion about gear options.
ACTIONS Listed by Division (Sling, F-TR, F-Open)
ACTIONS by Brand (Combined Listing — All Divisions)
BARRELS by Brand (Combined Listing — All Divisions)
BULLETS by Brand (Combined Listing — All Divisions)
CARTRIDGE BRASS by Brand (Combined Listing — All Divisions)
POWDER by Brand (Combined Listing — All Divisions)
STOCKS by Brand (Combined Listing — All Divisions)
RIFLESCOPES by Brand (Combined Listing — All Divisions)
SPOTTING SCOPES Listed by Class (Sling, F-TR, F-Open)
Cartridge Selection in F-Open Division
In addition, Matt produced an interesting listing of cartridge/caliber types for the F-Open division. This is helpful because cartridge choice is unrestricted in the F-Open class. By contrast, the F-TR division is limited to .223 Remington (5.56×45) or .308 Winchester (7.62×51). You can see that the .284 Winchester (and variants) currently dominate F-Open.
Part 2 of this Volume is focused on various aspects of advanced hand-loading. Modern Advancements (Vol. II) employs live fire testing to answer the important questions that precision hand loaders are asking. What are the best ways to achieve MVs with low ES and SD? Do flash hole deburring, neck tension, primer selection, and fill ratio and powder scales sensitivity make a difference and how much? All of these questions are explored in detail with a clear explanation of test results.
Cortina says the very accurate Brux barrel and razor-sharp 6-24x56mm Kahles scope help achieve this kind of outstanding performance at 1000 yards. Here are the key components for Erik’s latest PRS rig:
