|
|
July 12th, 2015
by Dennis Santiago
Tricked-out match guns are fun but, if you want to prove that you’ve got an eagle eye and steady hands, a true test of skill is the Civilian Marksmanship Program’s As-Issued Four Gun Aggregate.
 The Four Gun Aggregate encompasses a series of CMP John C. Garand 30-shot matches (200-yard As-Issued Military Rifle Match Course A) on NRA SR targets at one of the CMP Regional Games or the Nationals officiated by the CMP. These are the only places you can earn the coveted neck-ribbon CMP achievement medals.
You will need four as-issued rifles. The first is the M-1 Garand. (The course of fire is named after this rifle’s inventor.) This remarkable battle rifle will test your prowess at slow prone, rapid prone, and offhand. The match winner will put almost all bullets into a saucer.
You do get to hear that classic “ping” when the en bloc clip ejects with this gun. It’s a good idea to write your firing point number on your hand for each match because you will move around over the course of the tournament.
Next comes the hyper-accurate 1903 Springfield. You can use either the WW I M1903 or the later WW II M1903A3 model with peep sights. A Springfield will typically shoot groups half the size of a Garand with the same ammunition. Think potential in terms of tea cups instead of saucers.
Share the post "Want a Challenge? Try the CMP’s Four Gun Aggregate"
May 30th, 2015
Some folks say you haven’t really mastered marksmanship unless you can hit a target when standing tall ‘on your own hind legs’. Of all the shooting positions, standing can be the most challenging because you have no horizontally-solid resting point for your forward arm/elbow. Here 10-time National High Power Champ Carl Bernosky explains how to make the standing shot.
Carl Bernosky is one of the greatest marksmen in history. A multi-time National High Power Champion, Carl has won ten (10) National High Power Championships in his storied shooting career, most recently in 2012. In this article, Carl provides step-by-step strategies to help High Power shooters improve their standing scores. When Carl talks about standing techniques, shooters should listen. Among his peers, Carl is regard as one of the best, if not the best standing shooter in the game today. Carl rarely puts pen to paper, but he was kind enough to share his techniques with AccurateShooter.com’s readers.
If you are position shooter, or aspire to be one some day, read this article word for word, and then read it again. We guarantee you’ll learn some techniques (and strategies) that can improve your shooting and boost your scores. This stuff is gold folks, read and learn…
 How to Shoot Standing
by Carl Bernosky
Shooting consistently good standing stages is a matter of getting rounds down range, with thoughtfully-executed goals. But first, your hold will determine the success you will have.
1. Your hold has to be 10 Ring to shoot 10s. This means that there should be a reasonable amount of time (enough to get a shot off) that your sights are within your best hold. No attention should be paid to the sights when they are not in the middle — that’s wasted energy. My best hold is within 5 seconds after I first look though my sights. I’m ready to shoot the shot at that time. If the gun doesn’t stop, I don’t shoot. I start over.
2. The shot has to be executed with the gun sitting still within your hold. If the gun is moving, it’s most likely moving out, and you’ve missed the best part of your hold.
3. Recognizing that the gun is sitting still and within your hold will initiate you firing the shot. Lots of dry fire or live fire training will help you acquire awareness of the gun sitting still. It’s not subconscious to me, but it’s close.
4. Don’t disturb the gun when you shoot the shot. That being said, I don’t believe in using ball or dummy rounds with the object of being surprised when the shot goes off. I consciously shoot every shot. Sometimes there is a mistake and I over-hold. But the more I train the less of these I get. If I get a dud round my gun will dip.* I don’t believe you can learn to ignore recoil. You must be consistent in your reaction to it.
 5. Know your hold and shoot within it. The best part of my hold is about 4 inches. When I get things rolling, I recognize a still gun within my hold and execute the shot. I train to do this every shot. Close 10s are acceptable. Mid-ring 10s are not. If my hold was 8 inches I would train the same way. Shoot the shot when it is still within the hold, and accept the occasional 9. But don’t accept the shots out of the hold.
6. Practice makes perfect. The number of rounds you put down range matter. I shudder to think the amount of rounds I’ve fired standing in my life, and it still takes a month of shooting standing before Perry to be in my comfort zone. That month before Perry I shoot about 2000 rounds standing, 22 shots at a time. It peaks me at just about the right time.
This summarizes what I believe it takes to shoot good standing stages. I hope it provides some insight, understanding, and a roadmap to your own success shooting standing.
— Good Shooting, Carl
* This is very noticeable to me when shooting pistol. I can shoot bullet holes at 25 yards, but if I’ve miscounted the rounds I’ve fired out of my magazine, my pistol will dip noticeably. So do the pistols of the best pistol shooters I’ve watched and shot with. One might call this a “jerk”, I call it “controlled aggressive execution”, executed consistently.
Share the post "High Power Champ Carl Bernosky Explains How to Shoot Standing"
May 28th, 2015
This 2010 story is reprinted at readers’ request.
In the past few years, tubeguns have really taken over in high power circles. At many matches you’ll see more tubeguns than conventional prone rifles, and a high percentage of those tubeguns will have been built using an Eliseo (Competition Machine) CSS chassis kit.
Step-By-Step Guide to Stock Set-Up
If you are a new tubegun shooter, or if you are planning a tubegun build this winter, our friend “GS Arizona” has prepared a comprehensive set-up guide for Eliseo tubeguns. Eliseo’s CSS chassis system affords a myriad of adjustments. Initially, one can be overwhelmed by all the variables: Length of Pull, Length to Sights, Length to Handstop, Cheekpad Height, Buttstock Offset, Buttstock Cant Angle, Handstop Angle, and Forearm Rotation.
Share the post "Tube TECH: How to Configure Eliseo Tubegun for Prone Shooting"
December 18th, 2013
Report based on Lars Dalseide story in NRAblog
 If you watched the position and prone shooters at the 2012 London Olympic Games, you couldn’t help but notice the exotic rifles competitors were shooting. There were wood stocks, metal stocks, off the shelf rifles and customized specials. Why are there are so many different design features and stock types? To answer this question, the NRAblog’s editors called on Jessie McClain of the NRA Competitive Shooting Division.
“The customized rifles, like the Anschütz you showed me, can make a real difference in a shooter’s performance,” explained McClain. “I went from a decent shooter to making the varsity shooting team my freshman year because of the rifle.” As Jessie explained, one new feature out there is the adjustable stock, which she called the Porsche of the shooting world. Fully adjustable from the butt plate to the check piece to the hand stop and risers and bolt knobs, this component is fully customizable to the athlete … which can be a huge advantage. “Every person is different … a customizable rifle fits anyone. A rifle team can purchase four of these and field a shooting team for years.”
Not for Novices
The one warning she did have is that these are not for the novice shooter. Get a couple of years of shooting under your belt and then think about moving on to a customized rifle. That way, you can learn the basics before investing in the high dollar equipment. “You wouldn’t give your 16 year old a Ferrari for his first car, would you?”
The Modern Anschütz Position Rifle
Smallbore match rifle makers are using modern materials in response to the need for greater adjustability (and enhanced accuracy). One of the popular new designs is the Anschütz model 1913 position rifle with a “1918 ALU Precise” brushed aluminum stock. This looks like it has been crafted in an aircraft plant.
Story by Lars Dalseide, courtesy the NRA Blog.
Share the post "Fully Adjustable, ‘Customizable’ Smallbore Match Rifles"
July 25th, 2013
Story based on report by Lars Dalseide for NRABlog.
This week prone shooters are competing at the NRA National Smallbore Rifle Championships at Camp Perry. First on the agenda was the Metallic Sights Match. Shot at distances of up to 100 yards, the Metallic Championship is the aggregate of six separate matches fired over a two-day period. Courses of fire include a Dewar course (20 shots at 50 yards and 20 shots at 100 yards), 40 shots at 50 meters, and 400 shots at 100 yards.
NRABlog Archive Photo of Reya Kempley in an “Any Sights” Prone Match at Camp Perry.
Coming out on top, with a score of 2400-202X (‘X’ stands for bullseyes) was New York’s Reya Kempley. This talented young lady beat all the men, including top marksmen from the USAMU. Congrats to Reya for an outstanding performance. Here are the top five smallbore metallic sights competitors:
|
NRA Smallbore Prone Rifle
Metallic Sights
|
| Place |
Name |
Score |
| 1 |
Reya Kempley |
2400-202x |
| 2 |
Eric Uptagrafft |
2399-194x |
| 3 |
Michael Seery |
2399-187x |
| 4 |
Michael Mcphail |
2399-186x |
| 5 |
Joseph Hein |
2398-193x |
Smallbore 3P Photo Gallery
Earlier this week the Smallbore Three-Position Matches were held at Camp Perry. Here are 3P “any sights” and metallic sights event photos from the GOnraMedia Archive:
Share the post "Kempley Wins Iron Sights Prone Championship with Perfect Score"
June 20th, 2013
In an article for the CMP Online Magazine, SSG Tobie Tomlinson of the USAMU Service Rifle Team explains the various sight alignments employed by iron sights shooters. Tobie writes: “There are a myriad of sight picture options that shooters have used to great effect over the years. The sight picture that allows you to consistently shoot the smallest group, with a minimal shift in zeros, is the correct one. Remember, for any shooter to be successful, consistent sight picture must be complemented by front sight focus and sight alignment.”
CLICK HERE to read FULL ARTICLE
 Center Hold
The front sight is placed directly in the center of the target. A center hold is great in different light conditions. On a bright day the target appears small. On a dark day the target appears large. In [any] light conditions the center of the target is always in the center. A shooter who has problems with elevation shots in various light conditions may benefit from a center hold.
 6 O’Clock Hold
With the 6 O’Clock hold the front sight is placed at the bottom of the aiming black. For many shooters, this hold allows precision placement of the front sight. The ability to accurately call your shots will come with time and experience. Light changes, which alter the appearance of the target, may affect shooters who utilize the 6 O’Clock hold.
 Sub 6 Hold
The sub 6 is just like the 6 O’Clock hold, only there is a small line of white between the front sight and the aiming black. Many shooters have a problem determining the exact 6 O’Clock position with their front sight, but by using a sub 6 or line of white they may be able to better estimate their hold.
 Frame Hold
With the frame hold, just like with the other holds, the front sight is in the center of the rear sight. The front sight can then be placed at the 6 or 12 O’Clock position on the frame when there is no visible aiming point. This hold is typically reserved for foul weather and poor light conditions. By placing the front sight at the top or bottom of the frame, a shooter may hold better when there is little target to see. It can be difficult to hold a tight group this way, but it may add more hits in bad conditions. This technique is normally applied when shooting longer ranges such 600 or 1000 yards.
CLICK HERE for more articles from The FIRST SHOT, CMP Online Magazine.
Share the post "USAMU Article Explains Sight Pictures for Metallic Sights"
October 27th, 2012
Houle Bloop Tube (Sight Extension) Gear Review by Robert Whitley
As a competitive shooter and a builder of custom AR-15 accuracy competition uppers, one of the frequent requests I have from shooters is for a recommendation for a good bloop tube. What people want is a bloop tube that is light and strong, one that has no detrimental effect on accuracy, one that works well with many of the existing front sights, and can be removed and re-attached quickly and easily with no loss of zero. For years finding a bloop tube that fulfills all these requirements has been a somewhat elusive exercise. I am pleased to report that I have found the Houle Bloop Tube to meet all my requirements. In my opinion, this is the best bloop tube on the market, by far. You can order a Houle tube from Norm’s Website, TopGunRI.com or e-mail Norm at topgunngh [at] verizon.net.
 Bloop Tubes Designed by a National Champion
Norm Houle is a High Power and long-range shooter who has used these tubes to win National High Power Rifle Championships multiple times in past years. This past summer at Camp Perry, Norm’s bloop tubes were used by top “podium level” shooters in various events, including David Tubb, who won the National Long Range Championship using one of Norm’s tubes. Rodrigo Rosa also used Houle tubes this year to place second in the National High Power Rifle Championship and third in the Long Range National Championship.
I have a couple of Norm Houle’s bloop tubes that I have used with a couple of rifle projects. Here are some of my thoughts on installation and use of the Houle Bloop Tubes:
- Accuracy with the tubes in place is excellent!
- The tube assemblies are two piece clamp-on tube assemblies, and the bloop tubes can be removed and re-attached with no loss of zero (and I mean no loss of zero). This is a big one! Over the years I have had quite a few clamp on tubes, but few of them repeated like these.
- The tubes are very light but also very strong and low profile. Some of the clamp-on bloop tubes I have had over the years were huge, heavy and provided a large side profile (crosswind sail factor for offhand, etc.).
- Norm offers 2″, 4″, and 6″ bloop tube lengths. The tubes are made to work with a .750″ dia. muzzle turn down and both of the ones I have work perfectly with a minimum turndown of 1.625″ long which provides enough “front-back” distance to permit the locating ring and bloop tube to be properly mounted on the barrel at the same time and work as they should. The tubes are also set up to use front sights set up to mount on a .750″ diameter mounting.
- Each tube assembly has a clamp-on locating ring plus a clamp-on bloop tube that positively indexes off a tapered pin that protrudes from the locating ring. The locating ring is light but very strong and absolutely stays put when you clamp it on the barrel end (clamps on with one screw using a common 7/64″ Allen wrench). The bloop tube part of the assembly has two clamp-on screws (use a common 7/64″ Allen to put on, mount and take off).
Using Different-Length Tubes for Different Applications
 You can buy one tube with two or more locating rings and set multiple rifles up so you can move your bloop tube (with front sight attached) from rifle to rifle. You can also use two different bloop tubes to mate up with one locating ring on the same rifle. Norm uses a 2″ tube (with a front sight attached) for offhand and rapid sitting at 200 yards (short tube minimizes crosswind sail factor). For 300-yard rapid prone and 600-yard slow prone, Norm takes off the 2″ tube and mounts a 6″ tube on the rifle (with a front sight attached to it). Norm switches back and forth as needed from match to match (a 4″ tube is also offered). Norm noted that Rodrigo Rosa also used the same Houle bloop tube set-up with two different tubes this year at Perry to take second overall.
The price of a Houle bloop tube assembly with locating ring is $125.00. That’s more than some other brands, but a good value considering the design, features, and high-quality construction of Norm’s bloop tubes. Just as with all sights and optics… you get what you pay for.
Share the post "Gear Review: Houle Bloop Tubes for Match Rifles"
August 14th, 2012
Breaking News from Camp Perry – Based on preliminary score tabulations, David Luckman of Great Britain is the 2012 NRA National Long Range Champion. Luckman finished with a 1246-74X.
 As reported on NRABlog.com, Luckman topped a very competitive field, with a strong final day showing: “After a practically perfect performance in today’s Palma Individual Trophy Match (449-31X), it appears that David Luckman of the Great Britain Rifle Team will be crowned tonight as the NRA’s 2012 Long Range High Power Rifle Champion. A veteran of the International Long Range Rifle world, Luckman’s list of accolades includes the 2010 World Individual Long Range Rifle title as well as seventeen consecutive UK Grand Aggregate crosses.”
David started shooting with Sedgemoor Target Shooting Club. He became an Atheling in 1994 and has since toured with the GB team to Canada, the USA, South Africa, Zimbabwe, Australia, New Zealand and Malaysia. A truly great marksman, in 2010 Luckman shot 4 international matches in four consecutive days (National, Kolapore, Mackinnon and Australia) without dropping a single point.
David works for Clerical Medical in Bristol as an Actuary. In his spare time he is an avid sports player and qualified tennis coach. He competes in triathlons and half marathons as well as enjoying mountain biking, surfing, swimming and other sports.
Share the post "David Luckman Wins 2012 NRA Long Range Championship"
July 19th, 2012
 Already respected for her High Power and Long-Range shooting, Nancy Tompkins added the 2012 NRA National Metric Prone Smallbore Rifle National Championship to her impressive shooting resume.
The weather was very hot and breezy for the 2012 Metric Prone National Championships conducted at the Wa-Ke’-De Rifle Range, Bristol, Indiana. Forty-two competitors were on hand for this third Annual Metric Prone Nationals. On Monday the 1200-point Iron Sights Aggregate was held, followed by the Any Sight Aggregate on Tuesday. Winds began mild and built throughout the day. The range is sheltered by high trees, but as the wind increases, it swirls, making this range a very difficult place to shoot (especially given the use of the more difficult Olympic metric targets). The 100-yard stage of each day was the determining factor!
Tompkins won the Iron Sight Aggregate with a score of 1172-55X to beat young Garrett Spurgeon by four points and Katie Bridges by 13. Kevin Nevius said: “Nancy was amazing — her 100-yard performance was some of the best shooting I have ever seen.”
Fellow Team Lapua member Kevin was shooting great himself. In the Any Sight competition, Kevin captured the National Title with an aggregate score of 1176-56X. Runner-up was Ron Wigger with 1169-54X, while Tompkins was High Woman at 1165-46X.
Tompkins’ consistency paid off as she captured the National Title with a total score of 2337-101X to narrowly defeat Spurgeon (2333-115X) and Nevius (2328-96X). “I was able to visit the new Lapua Service Center in Mesa, AZ about two weeks ago and found the perfect Lapua ammunition for my rifle,” reported Tompkins. Nancy was shooting Lapua Midas+ ammo, while Kevin Nevius competed using Lapua’s X-ACT ammunition. For additional information on the NRA Metric Smallbore Rifle National Championship visit http://www.nrahq.org/compete/nm_metric-prone.asp. To learn more about Lapua products and the Lapua Service Center contact Adam Braverman at abraverman [at] lapua.us.
| National Metric Smallbore Championships Results |
|
GRAND AGGREGATE
Nancy Tompkins: Winner, 2337-101X
Garrett Spurgeon: Second, 2333-115X
Kevin Nevius: Third, 2328-96X
Joe Farmer: High Senior, 2318-112X
Michelle Bohren: High Lady, 2310-91X
Katie Bridges: High Junior, 2320-108X
Virginia McLemore: High Senior Lady, 2306-91X |
|
IRON AGGREGATE
Nancy Tompkins: Winner. 1172-55X
Garrett Spurgeon: 1168-60X
Dempster Christenson: 1156-50X
Katie Bridges: High Lady, 1159-55X
Joe Farmer: High Sr., 1153-47X
Amanda Luoma: High Jr., 1138-43X
Virginia McLemore: High Sr., 1148-41X
Sarah Nakata: High Jr. Lady, 1139-36X
Samantha Peterson: High School Jr., 1123-31X |
ANY SIGHT AGGREGATE
Kevin Nevius: Winner, 1176-56X
Ron Wigger: Second, 1169-54X
Garrett Spurgeon: Third, 1165-55X
Nancy Tompkins: High Lady, 1165-46X
Joe Farmer: High Sr., 1165-51X
Katie Bridges: High Jr., 1161-53X
Virginia McLemore: High Sr. Lady, 1158-50X |
Share the post "Team Lapua’s Nancy Tompkins wins Metric Smallbore Nationals"
July 3rd, 2012
Those of us over-40 types can use some help when shooting iron sights. As one gets older, your eyes lose the ability to rapidly adjust to different points of focus. In practice, when shooting a rifle, this means the target image may be sharp but the sights are blurry, or vice-versa. Or you may be able to see the target and front sight reasonably well, but the rear sight is a complete blurr. (That is this Editor’s problem when shooting a rifle, such as a Swedish Mauser, with a notched blade rear sight.) Even if you are using a rear peep sight, you may see a blurry rear circle (or two circles if you have astigmatism). Placing a diopter on your shooting glasses can help many people see open sights better, when shooting both handguns and rifles.
 Merit Corp. in Schenectady, NY, offers an adjustable metal diopter that attaches to shooting glasses with a rubber cup. Though primarily intended for pistol shooters, the Merit diopter can also be helpful when shooting rifles with open sights, such as military bolt actions. Priced at $65.00, the Merit device features a shutter-style adjustable aperture iris.
 Merit explains: “The human eye, whether or not prescription glasses are required, cannot focus on both sights and the target at the same time. The eye will constantly shift focus from the sights to the target trying to ensure proper alignment. Unfortunately, as we age, the eye loses the flexibility which allows it to do this; thus, sights and target begin to grow fuzzy. There is a simple way to combat this by increasing your eyes’ depth of field (range of focus). If you look through an aperture or pinhole of the correct size, you will be able to see both sights clearly, and the target will be clearly defined as well.”
In addition to diopters for eyeglasses, Merit produces a variety of adjustable iris sight products for rifles, including the Variable Iris Aperature for AR15s. Visit MeritCorporation.com or call (518) 346-1420.
Cheaper Diopter from Lyman
If you can’t afford a Merit adjustable diopter, Lyman offers a similar all-plastic device for under $20.00. The Lyman Hawkeye Shooting Aid mounts directly to your eyeglass lens with a rubber suction cup. The diopter section is made of plastic, and aperture diameter is non-adjustable.
Though it is simple and inexpensive, the Lyman Hawkeye works for many shooters, if positioned properly. (Don’t think this is anything close to the Merit Diopter in quality though!) Currently, Cabelas.com has the Lyman Hawkeye on sale for just $12.88, item # IK-229094. MidwayUSA sells the Lyman Hawkeye for $18.99, item # 936878. One MidwayUSA customer reports:
“This thing really works! I have it on my shooting glasses, and it has made a significant improvement in my ability to keep the front sight and target in focus at the same time. If you are older and find that you are having a hard time keeping the target in focus over ‘iron sights’, then this may be the answer to your problem. Mine works equally well for both pistol and rifle, although I do have to change the device’s position on my shooting glasses when changing weapon types.”
Share the post "Diopter Devices Aid Older Eyes"
January 28th, 2011
The CMP has now approved two commercial rear sight inserts for use in Service Rifle competitions: the SR MicroSight, and the ShootingSight. The SR MicroSight produced by Stallings Machine of Senoia, GA is now legal for use in CMP-sanctioned Service Rifle matches beginning with the 2011 shooting season. The CMP also approved a rectangular rear aperture insert produced by ShootingSight of Ohio.
Only the SR Micro-Sight employs the Phased Zone Plate technology that keeps both front sight and target in sharp focus. READ MORE about Micro-Sight.
Formalizing the CMP’s action on sight inserts, the following two rule changes will be incorporated into the 2011 CMP Competition Rules that are due for release in March. Anyone with questions should contact CMP Headquarters at Camp Perry.
6.1.1 (4) Front and rear sights: Must be of U.S. Army design (either service or match). Front sights must have square-topped posts. Any modifications to the front sight, rear sight or rear sight hood must be specifically authorized in Rule 6.1.2.
6.1.2 (3) The dimensions of the rear sight aperture (internal diameter) and the front sight post (width) may vary from standard military dimensions. The rear sight hood diameter may not be longer than 0.70″ or larger than 0.50″ in diameter. The rear sight aperture may have a fixed, non-adjustable round, square or rectangular aperture insert. A corrective lens or multi-focal lens system may be inserted in the rear sight hood.
 MicroSight Inventory Sells Out Quickly — But More Coming
The SR MicroSight is available through Creedmoor Sports. Creedmoor has been quickly selling through its inventory. However, Creedmoor will have another 100 delivered by the supplier on February 1st. If you want a MicroSight, order soon, because they won’t be in stock long!
Creedmoor Item# MS-1 — Price: $139.95
CLICK HERE to order
Thanks to E. Kennard for this news item.
Share the post "MicroSight Approved by CMP for Service Rifle Competition"
January 14th, 2011
The new Micro-Sight was developed by scientists at Idaho National Laboratory (INL). This revolutionary optical insert for iron sights allows you to see BOTH the target and your front sight in sharp focus. The Micro-Sight employs Phased Zone Plate technology to improve focus of both close and distant objects.
Creedmoor Sports Now Selling Production Micro-Sight
This summer we reported that the Micro-Sight was in development. Now Creedmoor Sports has the first-ever production Micro-Sight, a special hood for AR and service rifle rear sights. The Micro-Sight hood sold by Creedmoor replaces a standard AR-15 hood (1/4-32 threads) as found in most NM AR-15 rear sights. The Micro-Sight element is positioned in the center of the hood, where it is shielded from moisture and impacts. Licensed by INL, the new Micro-Sight for ARs will be followed in the spring by inserts for popular rear match sights. The new SR Micro-Sight insert for ARs, item MS-1, costs $139.95. Order soon — Creedmoor has sold nearly 100 sights in just two days! Click HERE or call 800-273-3366 to order.
The Micro-Sight really works, and it makes a huge difference, particular for “older eyes” that have trouble focusing on both the target and the front sight. For the first time you’ll have a sight picture where the front sight and the target are both in focus. Creedmoor’s Dennis DeMille, a former National Service Rifle Champion, tells us: “This is one of the most game-changing products to come out in years!”
WATCH the VIDEO below to see the Micro-Sight in Use and to learn how it works…
Disclosure: Creedmoor Sports Advertises with AccurateShooter.com
Share the post "Creedmoor Sports Has First-Ever Micro-Sight for Service Rifles"
|
