Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 9th, 2013

TECH TIP: How to Apply Wipe-Out from the Breech

Wipe-Out foam bore cleaner is a product we’ve used with great success on many rifles. With sufficient dwell time, it removes both carbon and copper fouling. You can combine it with Wipe-Out Accelerator or Patch-Out liquid to speed up cleaning time. Many shooters, including this editor, find that bore-brushing has been virtually eliminated with the regular use of Wipe-Out. (With some barrels however, you may still have to brush or use a bore paste if you notice stubborn carbon build-up in the throat area.)

wipeout brushless bore cleaner foam

Out standard procedure with Wipe-Out is to insert an O-ring-sealed cleaning rod guide into the chamber and then squirt through the muzzle in short puffs. Put a towel or rag on the comb of your stock and watch for a little bit of foam to exit the rod guide. We usually wait 30 minutes for the bubbles to dissipate, then do a second foam application. Be sure to clean off any excess foam before it drips on your stock.

Applying Wipe-Out from Breech
You can also apply Wipe-Out from the breech. To allow breech-first application, Wipe-Out cans now come with a short plastic tube and a plastic tip that fits in your chamber. These can also be purchased separately for $2.50. However, we’ve found the plastic tip is too big for some chambers and it is not always easy to get a good, secure seal even if it does fit. Jason Baney has come up with a solution. READ Jason’s Wipe-Out Article.

Use Fitted Tubing for Breech-First Applications of Wipe-Out
You can apply Wipe-Out through the breech very effectively if you use fitted, plastic tubing. While this works well for bolt-actions, breech application is particularly handy for the Garand, M1A and other semi-autos. Jason Baney has written a short article describing this process. In a nutshell, you need one piece of tubing that fits the chamber tightly and then connects with a second, smaller diameter tube that attaches to the Wipe-Out can. This avoids any “over-spray” of foam in the action area, providing a clean, simple solution. Just squirt for a second or so, and wait for white foam to come out of the muzzle. Be sure to keep Wipe-Out off fine wood stocks.

Permalink Tech Tip No Comments »
May 16th, 2013

1K Benchrest School at Williamsport, PA, June 8th and 9th

Williamsport benchrest schoolIf you want to learn how to shoot accurately at very long range, one of the very best places to learn is the Williamsport 1000-Yard Benchrest School. The 6th Annual Benchrest School will be held Saturday June 8 and Sunday June 9, 2013. There are still a few slots available for this year’s session. Classes, taught by top 1K shooters, are held at the Original Pennsylvania 1000-Yard Benchrest Club Range, one of the best 1K ranges in the country. View the range on the Williamsport website, PA1000yard.com

Prospective students will be taught all aspects of long-range benchrest shooting from some of the most skilled marksmen in the country. All areas are covered: load development, precision reloading, bench skills, and target analysis. Much time is spent at the loading bench and on the firing line. And you don’t even need guns and ammo — all equipment and ammunition will be provided.

School instructors tell us: “This year’s benchrest school will be a 2-day weekend event. (There is also a ‘Meet and Greet’ gathering Friday evening). The school is a beginner class designed to teach the fundamental skills needed to be competitive at at 600 and 1000 yards. Saturday will be spent in class covering a range of topics including reloading dos and don’ts, load development and equipment handling. Sunday we will shoot an actual match to see what you’ve learned.”

Williamsport 1000 yard Benchrest School

Don’t hesitate if you want to grab one of the remaining slots for the 2013 school. Contact the school directors right away. For more info, visit contact Dave Gardner (Public Relations) at pa1000br@yahoo.com or 570-916-9095. To get an application, please contact Nancy Miller (Club Secretary) at nancymiller@htva.net or 607-426-1535. Cost for the class is $300.00 including lunch and dinner on Saturday.

To see what the 1K Benchrest school is like, watch the slide show/video below, produced by Sebastian Reist, an alumnus of the 2009 Williamsport 1000-yard BR school. Sebastian, a talented professional photographer, captured the highlights of his Williamsport 1K training weekend:

Please enable Javascript and Flash to view this VideoPress video.

Williamsport 1000 yard Benchrest School

Photos and slideshow courtesy Sebastian Reist, www.sreistphotography.com.
Permalink News, Shooting Skills No Comments »
April 5th, 2013

Nightforce 3.5-15 and 12-42 NXS Scopes on Sale at EuroOptic.com

With the advent of its new-for-2013 scope models, Nightforce is discontinuing some of its popular NXS scopes. Now you can save hundreds on the Nightforce 3.5-15x56mm NXS and 12-42x56mm NXS.

Eurooptic.com Nightforce NXS scope sale

Nightforce 12-42x56mm NXS on sale for $1700.00

Nightforce 3.5-15x56mm NXS on sale for $1599.00

Eurooptic.com Nightforce NXS scope saleSince its introduction, the big 12-42 NXS has always been one of the most popular and successful long-range and target scopes, and now you can save big bucks. Eurooptic.com has dropped the price on the 12-42x56mm NXS (various reticles) from $1981 to $1700 — that’s a $281.00 savings*. Both .125-MOA-click and .250-MOA-click turret models are on sale. Likewise Eurooptic.com has just slashed the price on the 3.5-15x56mm NXS from $1862 to $1599 — a $263.00 savings. NOTE: These big discounts apply to in-stock inventory on discontinued models only. When the supply is gone, it’s gone.

To order, visit Eurooptic.com or call (570) 220-3159 and ask for Jason. Available inventory and reticle choices are shown on the website.

*C330 Model with NR-R2 reticle is $1750; C331 Model with NP-R1 reticle is $1800.
Permalink Hot Deals, Optics No Comments »
January 25th, 2013

MEDIA Day Shoot: New MR762A1 LRP .308 from Heckler & Koch

HK Heckler Kock MR762A1 LRP

There were many semi-auto “tactical” rifles on display at MEDIA Day 2013, but one that caught our eye was the new MR762A1 LRP from Heckler & Koch (HK). The HK MR762A1 LRP (“Long Range Package”) looks similar to the H&K G28 rifle, Germany’s new Designated Marksman Rifle. But the G28 has a steel upper receiver, unlike the MR762A1, which evolved from the HK 417.

HK Heckler Kock MR762A1 LRP

Bedecked with quad rails up front, this black and tan rifle screams “tactical”, yet it is surprisingly comfortable to shoot. The grip is comfortable in the hand and the thick rubber buttpad on the adjustable buttstock did a good job of mitigating recoil. Jason said the trigger was crisp and the gun was very accurate. With a gas-piston system (rather than direct gas impingement), this rifle runs very clean. The proprietary, polymer HK magazine worked perfectly with zero feeding issues. We liked these better than the metal mags we’ve tried on other makers’ AR10-type systems.

HK Heckler Kock MR762A1 LRP

The MR762A1 is a direct descendent of the HK416/417 series, only in a semi-automatic rifle configuration developed for civilian users. The MR762A1 LRP employs the same HK proprietary gas piston operating system found on current HK rifles and carbines, using a “pusher” rod in place of the gas tube in the original M16/AR15/AR10 design. According to HK, the op-rod design “virtually eliminates malfunctions common to direct impingement gas systems since hot carbon fouling and waste gases do not enter the receiver area. The MR762A1 stays cleaner, reducing heat transfer to the bolt and bolt carrier, and drastically reducing wear and tear on other critical components.”

HK Heckler Kock MR762A1 LRP

The MR762A1 uses the same 10- and 20-round translucent polymer box magazines made for the HK417; a 5-round magazine is also under development. Additional accessories and add-ons for the LRP variant of the MR762A1 include an ERGO Pistol Grip from Falcon Industries, the same Blue Force Gear sling used on the HK M27 IAR supplied to the USMC, and an OTIS cleaning kit. The rifle package, complete with one 20-rd mag and one 10-rd mag, is shipped ready to use with the scope attached in a 42″-long Model 1720 Pelican case.

Permalink New Product 3 Comments »
January 19th, 2013

17 Win Super Mag Rimfire from Winchester — Field Report

17 Winchester Super Magnum Win Super Mag Rimfire

At Media Day we test-fired the new 3000 FPS rimfire ammunition from Winchester. Shooting the new 17 Win Super Mag ammo from a pre-production Savage B.MAG rifle (more on that later) and a Browning m1885 falling block, we were able to shoot sub-minute-of-angle groups with a pretty primitive front rest and lumpy rear bag. So far, then, it appears the ammo is pretty darn accurate for a mass-produced rimfire cartridge. Savage has promised to send us a B.MAG rifle for further testing. Watch the video below for more details on this new cartridge.

.17 Winchester Super Magnum RimfireNew 3000 FPS Rimfire Round
Winchester has announced a new, high-velocity 17-caliber rimfire cartridge, the .17 Winchester Super Magnum (aka .17 Win Super Mag). The .17 Win Super Mag will initially be offered in three bullet types: 20gr plastic tip (Varmint HV), 25gr plastic tip (Varmint HE), and a 20gr JHP (Super-X). The 20-grain varieties boast a 3000 FPS muzzle velocity, earning honors as the fastest Rimfire ammo ever made.

.17 Winchester Super Mag Specifications
Symbol Sub Brand Bullet Weight Muzzle Velocity
S17W20 Varmint HV 20-gr Plastic Tip 3,000 fps
S17W25 Varmint HE 25-gr Plastic Tip 2,600 fps
X17W20 Super-X 20-gr JHP 3,000 fps

Winchester claims that all .17 Win Super Mag ammo types shoot much flatter than the .22 Win Mag and .17 HMR, while delivering more than 150 percent more energy than both. In addition, the .17 Win Super Mag “bucks the wind” better than any other rimfire ammo — exhibiting significant less horizontal drift at extended ranges. The ammunition should be available at Winchester dealers by April 2013.

17 Winchester Super Magnum Win Super Mag Rimfire

.17 Winchester Super Magnum Rimfire

Click Boxes to View Larger Charts

Permalink Bullets, Brass, Ammo, Hunting/Varminting, New Product 3 Comments »
April 10th, 2012

New High-End Extreme-Range Laser RangeFinder from Vectronix

terrapin LRF laser Vectronic rangefinderEurooptics.com now carries the impressive Vectronix Terrapin Laser Rangefinder. The $1995.00 Terrapin is a high-grade, milspec device rated to 2400m, well beyond the stated ranges for LRFs in the $600-$1000 class. Field reports indicated that the Terrapin is very good. One field tester, using a Terrapin set on a tripod, said the Terrapin hit 16″ plates at 800 yards more reliably than a Swarovski Laserguide. Ranging a small object like that at 800 yards is a tough test for any LRF. The Terrapin performs well on smaller objects because it has extremely tight beam divergence (this means the beam doesn’t spread out like a wide cone at long range).

The reports we’ve received indicate that the Vectronix lives up to expectations created by its 2400m distance rating. Jason Baney reports: “This Vectronics is impressive. In the right conditions, these units can range well beyond 2000 yards. On a Snipers’ Hide Thread, Vectronix Terrapin owners have reported ranging successfully past 3000 yards on large objects.” Available in tan or green, the Terrapin has a rugged aluminum inner housing and is rated to be waterproof with 60 minutes of immersion. It is easy to hold, and weighs just 1.1 pounds. Efficient electronics allow the Terrapin to make over 7,000 ranging “shots” before the two CR123 batteries need to be replaced.

terrapin LRF laser Vectronic rangefinder

Permalink New Product, Optics No Comments »
March 25th, 2012

Williamsport 1000-Yard Benchrest School Set for April 27-29, 2012

Williamsport benchrest schoolIf you want to learn how to shoot accurately at very long-range, one of the very best places to learn is the Williamsport 1000-Yard Benchrest School. The Fifth Annual Benchrest School will be held April 27, 28 and 29 this year. There are still a few slots available for this year’s sessions. Classes, taught by top 1K shooters, are held at the Original Pennsylvania 1000-Yard Benchrest Club Range, one of the best 1K ranges in the country.

Prospective students will be taught all aspects of long range benchrest shooting from some of the most skilled marksmen in the country. All areas are covered from load development, precision reloading, bench skills, and target analysis. Much time is spent at the loading bench and on the firing line.

Williamsport 1000 yard Benchrest School

If you’re interested, you need to contact the school directors right away. While these Benchrest schools typically sell out, as of 3/24/2012, there were still a few student slots available for the late-April class session. If you want to grab one of the remaining slots for the 3-day school, don’t hesitate. For more information or to sign up for the 2011 1000-Yard Benchrest Class this April, contact School Director Frank Grappone, or visit the Williamsport website, PA1000yard.com.

To see what the 1K Benchrest school is like, watch the slide show/video below, produced by Sebastian Reist, an alumnus of the 2009 Williamsport 1000-yard BR school. Sebastian, a talented professional photographer, captured the highlights of his Williamsport 1K training weekend:

Please enable Javascript and Flash to view this VideoPress video.

Williamsport 1000 yard Benchrest School

Photos and slideshow courtesy Sebastian Reist, www.sreistphotography.com.
Permalink Competition, Shooting Skills No Comments »
January 1st, 2012

Happy New Year and Message to our Readers Worldwide!

2012 New Year AccurateShooter.comWe wish all our readers a happy, safe, and prosperous New Year. We hope that, in 2012, you’ll enjoy your precision rifles, spending “quality time” at the range with friends who share your “addiction to accuracy”. We’ve made major upgrades to our Shooters’ Forum this year, and our audience is bigger than ever. We hope you’ll continue to enjoy our feature articles, our Daily Bulletin, our match reports, and our Free Forum Classifieds.

Forum Membership Grows 23%
We experienced big growth in our Forum this past year. Membership grew by 23% as member ranks swelled from just under 13,000 members to over 16,000 members! The Forum Classifieds section, with an effective seller/buyer feedback system, is more active than ever.

Custom Rifle AccurateShooter.com
Rifle by Long Rifles Inc. (Chad Dixon), photo by Robert J Anderson.

Daily Bulletin Is a Big Hit
The AccurateShooter Daily Bulletin has become a “must read” for anyone interested in serious rifle accuracy. In the Bulletin you’ll find money-saving sale notices, timely match reports, and a host of reloading and accurizing tips. And the Bulletin has become THE source for exclusive “scoops” on new product and new shooting technologies. Eric Stecker of Berger Bullets says “You guys have become the ‘USA Today’ of the precision shooting market.” 365 days a year we offer a unique combination of shooting tips, gear reviews, industry news, and highlighted bargains and special sales.

Big Plans for 2012 — With Your Help…
In the months ahead we plan to release more Cartridge Guides, more Gun Profiles, and some major gear comparison tests. We also hope to do audio interviews (“podcasts”) with top shooters such as Carl Bernosky, Sam Hall, and John Whidden. And we’ll continue to offer serious field tests and inside “scoops” on the latest precision shooting products.

AccurateShooter.com donation

We need your support. For over seven years the site has relied largely on volunteer efforts by dedicated shooters. But as the site grows, adding new types of content and more sophisticated features, we need the assistance of professional gunsmiths, writers, and movie editors. Those guys don’t work for glory alone.

For the site to continue to deliver more cutting-edge content, we need to bring in paid helpers. Right now, the site reaches over 100,000 shooters every WEEK. If the majority of those users could provide a small donation every year, we could deliver more stories, more tests, more Gun of the Week features, and more videos.

In the past quarter about 50 site users have generously donated to the site. I want to again thank all those who have contributed (at any time). But that still leaves tens of thousands of users who access the site regularly without contributing.

Here’s our proposal. First, if you have used our FREE Classifieds to successfully sell your rifles or shooting gear, consider sending in a dollar or two from your sale proceeds. Second, for those who use the site regularly, consider donating One Dollar a Month. That’s less than the price of a cup of coffee and much less than many websites now charge for their “premium content areas”.

Consider this — what do you pay for a movie ticket these days? Probably $8.50 or more for 90 minutes of escapism. For a buck a month ($12 a year) you can help this site provide a YEAR’s worth of info, tests, and shooting news that you won’t find anywhere else.

How to Contribute

Making a donation to the site is simple and easy. Just click on the “Donate Button” at right. If you have a credit card, you don’t need a Paypal account to contribute. Any sum is welcome — donations need not be large.

Help Support this Site by Making a Secure Donation.

















If you don’t like Paypal, you can send a check. Make the check payable to our Asst. Editor Jason Baney. Please list your Forum Log-In Name (if any), and mail the check to:

Jason Baney
P.O. Box 105
Montoursville, PA 17754

Permalink - Articles, News No Comments »
June 21st, 2011

1000-Yard Williamsport Egg Shoot

Williamsport Egg ShootLast weekend, the first annual Father’s Day Fun Match and Egg Shoot was held at the Original PA 1000-yard Benchrest Club in Williamsport. One of the challenges was hitting hard-boiled eggs placed on the berm at 1040 yards. Most “egg shoots” are conducted at considerably shorter distances — but at Williamsport, “fun begins at 1000″.

The video below shows the egg “shoot-off” at 1040 yards. The eggs were suspended with fishing line so they bounce a bit — adding to the challenge.

Near the end of the video, at the 1:06″ mark, you can see a hit on the #7 egg target. (That’s our Asst. Editor Jason Baney calling the hit — the shooter was using a 6mmBR). It all goes to show that, with enough rounds downrange, a good shooter can nail an egg at 1000 yards.

Permalink - Videos, Shooting Skills No Comments »
April 5th, 2011

Williamsport 1K Benchrest School in May Has a Few Openings

If you want to learn how to shoot accurately at very long-range, one of the very best places to learn is the Williamsport 1000-Yard Benchrest School. The next School session runs May 20, 21, & 22, 2011. Classes are held at the Original Pennsylvania 1000-Yard Benchrest Club Range, one of the best 1K ranges in the country. Classes are taught by top 1K shooters, including our Asst. Editor, Jason Baney.

Williamsport 1000 yard Benchrest School

While these Benchrest schools typically sell out, there were still eight (8) student slots available as of April first. If you want to grab one of the remaining slots for the 3-day school, don’t hesitate. To see what the 1K Benchrest school is like, watch the slide show/video below, produced by Sebastian Reist, an alumnus of the 2009 Williamsport 1000-yard BR school. Sebastian, a talented professional photographer, captured the highlights of his Williamsport 1K training weekend:

Please enable Javascript and Flash to view this VideoPress video.

For more information or to sign up for the 2011 1000-Yard Benchrest Class this May, contact School Director Frank Grappone, or visit the Williamsport website, PA1000yard.com.

Photos and slideshow courtesy Sebastian Reist, www.sreistphotography.com.
Permalink - Videos, Competition, Shooting Skills 1 Comment »