Take a look at that unusual target below. We bet you’ve never seen one of these before. It’s a 50-Yard Sighting Target for the M1 Garand. It’s designed to allow a rifleman to confirm his zeros for multiple yardages all the way out to 1000 yards. But importantly, he can establish those zeros at a very “short” shooting facility, since the target is positioned at a mere 50 yards.
Here’s how it works. The target is placed at fifty (50) yards. You start at the bottom, aiming at the black circle. Then check your come-up table and work your way up, clicking step-by-step to the various horizontal lines set for 200, 300, 500, 600 and 1000 yards. This is NOT “spray and pray” — you need to have a pretty good idea of the clicks you need, based on your ammo’s ballistics. This target is calibrated for the U.S. Military M72 Ball Ammo. The targets are available from Champion’s Choice ($0.75 each) or from Creedmoor Sports (12 for $5.95).
Lapua’s Kevin Thomas used this target to get zeroed for the recent D-Day Anniversary Match at the Talladega Marksmanship Park. Kevin used the target for both his M1 Garand as well as his M1903A1 Springfield, both chambered for the .30-06 Springfield cartridge.
Zeroing at a Short Distance — How to Use the 50-Yard Sighting Target, by Kevin Thomas
As part of my preparation for the Garand Match at the CMP’s Talladega Marksmanship Park, I needed to zero my new M1 Garand, but I was crunched for time. I didn’t have time to get to my normal range and confirm zeros at actual yardages. But a 50-yard zero target came to the rescue. Made for M1s using the M72 National Match ammo, the target allows the shooter to establish fairly good zeros at 200, 300, 500, 600 and 1,000 yards if you’ve got access to a 50-yard range.
I have no idea when these 50-yard Sighting Targets were first developed, but they’ve been around for at least as long as I’ve been involved in this game (longer than I care to admit). It consists of a tall target, with a smallish black bullseye located at the bottom center. The bullseye is an aiming point only. Extending through the top of the target is a vertical line that runs directly up the center, to nearly the top of the paper. Across this, there are intersecting horizontal lines that are marked 200, 300, 500, 600 and 1,000.
The target was designed for the M1 rifle using then-issued M72 National Match ammunition. This ammo launched a 173gr FMJBT bullet at approximately 2,640 fps. It was a good load in its day, supersonic out to the 1,000-yard line. While that ammo is fairly scarce these days, this isn’t a problem for the handloader. My standard match load for the M1 Garand utilizes the 175gr Lapua Scenar HPBT, and delivers remarkably similar ballistic performance. Thus my normal Garand load translates nicely to this 50-yard target. Yes, this is by design. No point in reinventing the wheel when Lake City has already established what works!
In use, the shooter sets the target up at a measured 50 yards, and (this is critical) checks the vertical line with a plumb bob or a carpenter’s level, to ensure that it is absolutely vertical. Once the target is set, the rifle is fired and the group noted. From there, it is a simple matter of zeroing it normally to bring the groups into alignment with the vertical line, at the elevation needed for a particular range. Once your group is hammering the intersection of the vertical line and the horizontal line marked “200”, you have established your 200-yard zero for that rifle. Record the number of clicks, and you’re good to go. Raise the impacts up to coincide with the line marked “300” and you now have a 300-yard zero as well. And so on, right up the target. Record those settings in your data book, and you’re ready to go to the range at the full distances. If done carefully, you may be in the X-Ring, but at the very least, you’ll be well-centered and ready to get some hard dope recorded for future shoots.
The same target can also be used with an M14/M1A, at least at the shorter distances. The ballistics of the M118 and the current M118LR are similar enough that this will get you on target at the full distances, probably requiring just a half MOA or so change from the 50 yard zero you recorded. Same bullets, moving at a slightly more sedate 2,550 fps, you’ll be in the ballpark at least.
Bryan Litz has recently popularized the short-range zeroing methods once again, reintroducing it to a new generation of shooters that may not have been aware of the old M72 short-range zero target. The same principles apply, and with the advent of the myriad computer ballistics programs and chronographs on the market today, any shooter can rapidly develop his own zero targets to accomplish the same result. But in the meantime, especially with the M1’s resurgent popularity, it’s nice to know that there’s an easy way to do things without a trip to a full-length range. The modestly-priced 50-Yard Sighting Targets can be ordered through Champion’s Choice or Creedmoor Sports.
Oh, and when I arrived in Talladega, yes, my zeros were good! All’s well that ends well. Safe Shooting! — Kevin Thomas
Share the post "Using a 50-Yard Sighting Target with Vintage Military Rifles"
Lapua Supports U.S F-TR Rifle Team
Lapua continues its support of the U.S. Rifle Team (F-TR) by donating Lapua factory-loaded .338 Lapua Magnum ammunition as part of a raffle package to raise funds for the Team. The raffle will take place this evening, on March 8, 2016.
The U.S. Rifle Team is raffling off a .338 Lapua Magnum Tactical Rifle donated and built by Kelbly’s Rifles. The raffle package includes a Nightforce Optics ATACR 5-25x56mm scope, 100 rounds of .338 Lapua Magnum 300gr OTM Scenar ammunition, plus a Gemtech Arrow suppressor
The total package value is over $9,000!
All of the proceeds from this raffle will be used to train and equip the U.S. Rifle Team as the team prepares for the 2017 World Championships in Canada.
About the U.S. Rifle Team (F-TR):
The U.S. Rifle Team (F-TR) is the two-time, Farquharson Target Rifle (F-TR) discipline World Championship winning squad. The U.S. Rifle Team competes regularly against other nation’s F-TR squads. At the 2013 World Championships, 17 nations were represented. The next World Championships will be held at Connaught Range near Ottawa, Canada in 2017. All of the rifles used in the F-TR class are chambered in either the .308 Winchester or .223 Remington calibers. This ensures a level playing field for all competitors. Every match winner can rightly say that it was their skill, not their caliber, that won the day. Most of our team events are fired at targets 1000 yards away. The inner-most scoring ring on our target is five inches in diameter. The next ring is ten inches in diameter. These shooters manage to put the vast majority of their shots inside that 10-inch ring at 1000 yards! Learn more about the US Rifle Team at www.USRifleTeam.com.
The U.S. F-TR Team Raffle, report by Ray Gross, Team Captain
Our raffle has been a huge success thanks to a number of sponsors who stepped forward to help out. A special thank you goes to Ian Kelbly, who offered to help out before I even asked. Kelbly’s became the first new sponsor of our team after I became Captain. Nightforce has been a long-time sponsor of our team and has been a huge help this cycle. Bryan Litz is a member of the team and his company, Applied Ballistics, is a sponsor. Bryan contacted Applied Ballistic Munitions and they happily donated ammo to our prize. Adam Braverman of Lapua, also a long-time team sponsor, sought us out, to help with our raffle.
What’s great about all of these companies is that we were already using their products, they didn’t have to sponsor us to get us to use them. We are in the business of winning and we have to use the best products. It speaks very highly of each of them that they are committed to supporting the shooting sports.
Share the post "U.S. F-TR Team Raffle Tonight — $9000.00 Package"
In some parts of the country, hunters are now required to use lead-free bullets. Expect restrictions on lead-based ammo to become more widespread in the years to come. Recognizing this, Lapua has upgraded its line of Naturalis bullets. Fitted with a distinctive green polymer tip, Naturalis bullets employ lead-free 99% copper construction. A hollow cavity provides reliable, uniform expansion, and the solid copper bullet body offers excellent knock-down power and weight retention.
The latest lead-free Naturalis bullets boast less drag and enhanced expansion. These third-generation Naturalis projectiles have been streamlined for better aerodynamics. In addition, Lapua has lowered the velocity threshold for consistent expansion by roughly 100 fps. This significantly broadens the velocity range in which the bullets will reliably expand.
Naturalis bullets feature extremely high weight retention, as demonstrated in the video above. (Note: the video has graphic sequences showing game flesh). The mushrooming of the bullet starts immediately on impact. The expansion process is started by the green polymer “valve” at the tip of the bullet, leading the bullet to expand symmetrically and without fragmentation. Watch the video for a demonstration of Naturalis bullet performance in ballistic media and game animals.
Naturalis lead-free bullets are available as components for handloaders, or loaded into Lapua factory-made cartridges. The Naturalis bullet line ranges in weight from 90 grains (6mm) up to 250 grains (9.3 mm). Bullets are offered in most popular calibers: 6mm, 6.5mm, 7mm, .308 (7.62mm), 8mm, .338, and 9.3 mm. Naturalis bullets and factory ammo are available from major retailers such as Grafs.com.
Share the post "Lapua Releases Third-Generation Lead-Free Naturalis Bullets"
Here’s a valuable web resource our readers should bookmark for easy access in the future. ShootForum.com offers a vast Bullet Database, which includes roughly 3900 bullet designs in all. We counted nearly 200 different 6mm bullets! The bullet info comes from the makers of QuickLOAD Software. Access to the online database is FREE. Most database entries include Caliber, Manufacturer, Stated Bullet Weight, True Bullet Weight, Length, Sectional Density (SD), and Ballistic Coefficient.* In many cases multiple BCs are provided for different velocity ranges.
The database is great if you’re looking for an unusual caliber, or you want a non-standard bullet diameter to fit a barrel that is tighter or looser than spec. You’ll find the popular jacketed bullets from major makers, plus solids, plated bullets, and even cast bullets. For those who don’t already own QuickLOAD software, this is a great resource, providing access to a wealth of bullet information.
Values for Changed Bullet Designs
Some of our readers have noted some variances with BCs and OALs with recently changed bullet designs. In general the database is very useful and accurate. However, as with any data resource this extensive, there will be a few items that need to be updated. Manufacturers can and do modify bullet shapes. Kevin Adams, one of the creators of the database, explains: “Thanks for mentioning this database. It took us a long time to collate this information and have agreement to publish it. Please keep in mind that individual batches of bullets will differ from the manufacturers’ stated standards. This is more a reflection on the manufacturers’ tolerances than the database ‘accuracy’. We will continue to add to the database as more manufacturers’ figures come available.”
Share the post "Get Info for 3900 Bullets in FREE Online Database"
Here’s something you don’t see very often — Lapua cartridge brass on sale. As part of its Back-to-Black promotion, Brownells has deeply discounted its inventories of Lapua Brass. For most cartridges/calibers, the price has been reduced at least $10.00 per 100-count box. Here are the sale prices, good through the end of the week:
We congratulate Rebecca Richards of Australia for her incredible shooting in the recent RBA Benchrest Grand Prix at the Sydney International Shooting Centre. Consider this, out of the five (5) benchrest classes competing (two air rifle, and three rimfire) Rebecca won four classes outright while placing third in the fifth class. Wow — that represents complete and total domination. Remarkably, Rebecca dropped only 10 points in four days of shooting.
Rebecca’s amazing 4-day performance was near perfection. Overall, she scored 2740 out of a total of 2750 possible points. She shot four of 11 targets with perfect 250/250 scores, and six more with 249/250. Over the course of the event she hit 152 “dots” (center bulls) out of a total possible 275. That’s pretty amazing if you understand how small those center bulls really are. Take a look at the target photo below — the center dot is tiny.
All in all, this was a performance for the ages — one of the best combined airgun/rimfire benchrest performances in Southern Hemisphere history. Kudos to Rebecca for her brilliant performance.
Here’s the modern Sydney International Shooting Centre…
The NBRSA short-range Group Benchrest Nationals commenced this week at the St. Louis Benchrest Club Range in Wright City, Missouri. This will be followed, next week, by the World Benchrest Shooting Federation (WBSF) Championships at the same venue. Lapua staffer (and Forum member) Kevin Thomas trekked to Missouri for this combined National/International event. Kevin reports: “The best benchrest shooters [on the planet] will fight it out over the next two weeks to see who can shoot the smallest groups possible. And I’ve got to say, many of these shooters are truly amazing. It doesn’t hurt a bit that virtually all of them are shooting Lapua brass, either.”
The WBSF event has attracted shooters from around the world. Benchrest aces from Australia, Canada, Great Britain, and South Africa are already in St. Louis, with other international competitors set to arrive next week. On Monday, Day One of the NBRSA Nationals, the Unlimited Class rigs showed off their capabilities. As shown below, these heavy rail guns represent the pinnacle of precision in the 100/200-yard benchrest game.
Here’s living legend Walt Berger, founder of Berger Bullets. Now in his late 80s, Walt is still competing at a very high level. Walt is proof that Benchrest shooting is truly a “sport for a lifetime”.
Here’s a beautiful Missouri sunrise captured as Kevin Thomas drove to St. Louis for the 2015 NBRSA Benchrest Championships.
Share the post "St. Louis Club Hosts NBRSA and World Benchrest Championships"
If you have a rifle chambered in .260 Remington, you may be wondering if the Lapua .260 Brass is worth the money compared to domestic-made brass. Well, the answer is “yes” if you demand consistent weight and dimensional uniformity (including neckwall thickness).
Mike Harpster of Dead Center Sports took the time to weigh and measure Lapua .260 Rem brass. His test show this brass to be extremely uniform. Weight variance was less than one (1) grain in a 20-case sample. And case neckwall thickness was very consistent.
Report by Mike Harpster: Lapua .260 Rem Brass Test Results (with Comparisons)
I pulled twenty (20) pieces randomly from one Lapua box to do some measurements. I weighed them on my Mettler-Toledo digital lab scale and here are the individual weights of each case. Remarkably, the Lapua brass had less than one grain total weight variance among all 20 cases!
While checking the Lapua brass I remembered I had just received some Winchester brand .308 brass, so I thought it would be interesting to do a comparison between the two brands. I again pulled 20 cases at random from a bag of 50 and repeated the same measurements. The results are shown in the right half of the table below.
Weight Variance Lapua .260 Rem Brass vs. Winchester-Brand .308 Win Brass
LAPUA .260 Rem Brass
Winchester .308 Win Brass
Average: 172.20 grains
ES: 0.94 grains
SD: 0.259
Average: 158.49 grains
ES: 2.64 grains
SD: 0.678
Winchester Brass Further Inspection
The flash holes on the majority of the Winchester brass were not round or centered and they had large burrs inside. The neck wall thickness was pretty consistent, varying only .0015″ (.0125″ – .014″). As you can see in the photo (right) many of the Winchester cases were badly dented while the Lapua brass showed very few minor dents. The annealing on the necks of the Lapua brass was clearly evident while the Winchester showed no signs of being annealed. [Editor’s note: Winchester tumble-polishes its brass before shipping — so you would not notice annealing coloration if annealing had been done.]
Lapua Brass Further Inspection
With sample Lapua .260 Rem cases, I also measured the neck wall thickness in four places with calipers, not the most accurate method but I feel confident that the thickness did not vary more than .001″ over the 20 cases (.0145-.0155). The inside diameter of the neck measured .260 which would give .004 of neck tension out of the box. I visually checked the flash holes and I did not find any flakes of brass or burrs inside, the holes were round and centered.
Summary — This Lapua Brass is Impressive
I have never done these measurements on any other brass so I don’t know how they compare, but I am very impressed with the overall quality of the Lapua .260 brass. If they prove to hold up to the repeated firings I get from my Lapua 6BR brass I believe .260 shooters will be very happy.
Mike Harpster — Dead Center Sports
105 Sunrise Drive
Spring Mills, PA 16875
phone: 814-571-4655 www.deadcentersports.com
Share the post "Tests Show Lapua .260 Remington Brass is Very Uniform"
With so much action going on at Camp Perry, Ohio this August (including the Fullbore Worlds), you might not realize that another NRA rifle championship was taking place simultaneously in Pennsylvania. The NRA High Power Hunter Rifle Silhouette Championship was held 6-8 August at the Ridgway Rifle Club, in Ridgway, Pennsylvania. This event attracted the nation’s top silhouette shooters.
At this year’s Silhouette Championship, Team Lapua shooters Cathy Winstead-Severin and Mark Pharr finished first and second overall. The match went down to the wire, with Cathy edging out Mark in a shoot-off for the overall title. Earlier in the competition, Cathy set a new Woman’s National Record in a 120-shot course with a stunning 97/120, breaking the previous record of 90 by seven points. Another record was broken by the Hunter Rifle Team of Cathy Winstead-Severin, Mark Pharr, and Mallory Nichols. This talented Team Lapua threesome set a new national record of 295, besting the mark set in 2004. Team Lapua also took second place in the Standard Rifle Team Division.
16-Year-Old Girl Finishes Fourth in Hunter Class
Team Lapua’s youngest member, 16-year old Mallory Nichols, was incredibly impressive as she entered the competition as an AA shooter and blasted her way through AAA into Master class in finishing fourth overall in Hunter Rifle. (She was in the running for third place overall, until a shoot-off with Eric Boos of Washington, who finished third). Nichols also set new national records for Long Run for Women and Intermediate-Junior hitting 18 pigs in a row. The previous Intermediate-Junior record was 14 set by Luke Johnson in 2011.
Winning Silhouette Loads
2015 Overall Silhouette Champion Cathy Winstead-Severin was shooting a 6-6.5×47 Lapua with 90-grain and 105-grain OTM Scenar bullets, pushed by Vihtavuori N135 powder. Mark Pharr and young Mallory Nichols were both shooting the regular 6.5×47 Lapua cartridge with 108-grain and 139-grain OTM Scenar bullets and Vihtavouri N140 powder.
Share the post "Records Broken at 2015 High Power Silhouette Nationals"
We know you guys will like this, since most of you are using Lapua brass for your precision handloads. Now, for a limited time, Grafs.com is offering a custom thermal chest in Lapua livery with a Lapua logo. Use this cooler for your favorite beverage… or better yet, keep your precious match ammo cool. You will definitely get noticed at the range if you shelter your ammunition in a Lapua cooler. A $24.99 value, this Lapua thermal chest is FREE with the purchase of at least $200.00 in Lapua products from Grafs.com. Order a couple boxes of brass and a box of Scenars and you’ve earned yourself a cooler (limit one per customer).
Share the post "Special Offer: Lapua-Branded Cooler from Grafs.com"
Here’s something you don’t see every day — pistol-caliber Lapua brass. We shoot superior Lapua brass in our rifles, and now you can get the “good stuff” for your 9mm pistols too. It’s nice to know that Lapua 9mm brass is available for those guys who accept “nothing but the best”. Grafs.com received a special order of 9mm Luger (aka 9x19mm or 9mm NATO) pistol brass made by Lapua. It is available right now for $19.99 per 100-count bag or $179.99 per 1000-count box. That’s 38% off the regular 1K box price.
When It Pays to Shoot Premium Pistol Brass
Is this Lapua 9mm brass worth the price compared to the cheaper alternatives (such as once-fired police range pickups)? We think the answer depends on your application. If you shoot a 9mm pistol in Bullseye competition, yes it makes sense to get the Lapua. Or, if you have a 9mm revolver that carries the shells in a moon clip, the Lapua brass may be worth getting. With a 9mm revolver, your brass is not marred by an extractor claw and then ejected on to the ground. If we had the impressive new 8-shot, Miculek Edition Smith & Wesson model 929 9mm revolver (below), we’d definitely shoot Lapua brass.
Share the post "For the Man Who Has Everything — Lapua 9mm Brass"
Editor’s Note: We originally ran this story in 2010. Since then we have had many reader inquiries about using .22-250 Lapua brass for a 6mm cartridge. Well our friend Robert Whitley worked hard on that concept a few years back, when Lapua .22-250 brass first became available. He came up with a nice 30°-shoulder wildcat that matches the accuracy of the best mid-sized 6mm cartridges. Read all about Whitley’s 6mm-250 Imp 30 below.
Our friend Robert Whitley of 6mmAR.com has come up with a new, accurate 6mm wildcat based on the new Lapua .22-250 brass that has just started arriving. Robert provides this report:
“I just received a box of the new Lapua .22-250 cases — beautiful brass! My real desire with it was to make it into a 6mm version, preferably something that was ‘no neck-turn’ with a .308 Win-type body taper that would work well in bolt gun and semi-auto magazines and would have a capacity to allow superior velocities. I considered the 6XC, but since you have to bring a whole lot of the shoulder of the brass up into the neck (when you re-form the brass from .22-250 to 6XC) that would necessitate neck-turning it because with Lapua brass the shoulder metal is thicker than neck metal of the brass.
I wanted a simple ‘neck it up and shoot it’ approach so I made up a 6mm-250 Improved 30 cartridge (i.e. 6mm-250 Improved with a 30 degree shoulder) and this thing works great — just neck up the brass, load it and shoot it! The case is like a 6XC with a .030″ longer body and a .030″ shorter neck, which works out fine if you are going to be shooting mainly the 105-108 gr bullets (which it will do very well shooting 2950 – 3000 fps). If you want to hot-rod things, which I do not, I am certain the case can push the 105-108 gr bullets a fair amount faster.
I set it up and throated the reamer for the Sierra 107s and the Berger or JLK 105 VLDs (i.e. a .090″ free bore on the reamer) and it works great with them. If I was going to use it with the Lapua 105s or the Berger 108s I would add about .025″ – .030″ to the freebore of the reamer (i.e. make the freebore around .115″ to .120″).
The great thing is you can use a 6XC die set for it without modification, and all you need to do is keep the dies about .030″ up off the shell holder from their normal position and use them as is. You can make a spacer washer about .030″ thick that you can put on and take off the 6XC dies and use the dies for both cartridges (i.e. 6XC and 6mm-250 Imp 30).
6mm-250 Imp 30 Shows Great Accuracy
Fire-forming loads are real accurate. Here is a 10-shot group I shot prone at 100 yards shooting fire-forming loads with it — the group is the size of a dime. For fire-forming I use a milder, but still very accurate load: 32.0 grains of N140 with a Sierra 107 and a BR2 primer. For fire-formed cases you can jump up to N160 (around 38-40 grains — depending on lot) and it will push the 105-108 gr bullets real accurately in the 2950-3000 fps range, with low ES and SD. This cartridge has a neck length of .268″ which is plenty long for a 6mm shooting bullets with varying bearing surface lengths. The reamer diagram (link below) leaves about a .003″ neck clearance over a loaded round, which seems to work out very well for a ‘no-turn neck’ set-up.
So there you have it … the 6mm-250 Imp 30 is simple, easy to make, accurate as all get out, there are available factory die sets you can use, and it uses great new Lapua brass — what’s not to like!”
Here’s a valuable web resource our readers should bookmark for easy access in the future. 
If you have a rifle chambered in .260 Remington, you may be wondering if the Lapua .260 Brass is worth the money compared to domestic-made brass. Well, the answer is “yes” if you demand consistent weight and dimensional uniformity (including neckwall thickness).
Winchester Brass Further Inspection
At this year’s Silhouette Championship, Team Lapua shooters Cathy Winstead-Severin and Mark Pharr finished first and second overall. The match went down to the wire, with Cathy edging out Mark in a shoot-off for the overall title. Earlier in the competition, Cathy set a new Woman’s National Record in a 120-shot course with a stunning 97/120, breaking the previous record of 90 by seven points. Another record was broken by the Hunter Rifle Team of Cathy Winstead-Severin, Mark Pharr, and Mallory Nichols. This talented Team Lapua threesome set a new national record of 295, besting the mark set in 2004. Team Lapua also took second place in the Standard Rifle Team Division.
Our friend Robert Whitley of 
6mm-250 Imp 30 Shows Great Accuracy
