Run by Jeff Allen in Florida, CDI Precision Gunworks offers high-quality, mag-capable bottom metal for a wide variety of rifles and action types. The CDI bottom metal kits, priced at $209.00, feature an integrated trigger guard, mag-well, magazine release, and, of course, action-screw locations.
Most kits are designed for use with Accuracy International (AI) magazines, sold separately. These bottom metal kits are nicely finished and gunsmiths tell us that the fit is extremely good. CDI currently offers bottom metal kits for all these rifle/action types:
• Howa 1500 Short Action
• Howa 1500 Long Action
• FN-SPR Rifles (Also works on FN-PBR rifles)
• Remington 700 Short Action (.308, .300 WSM/7MM WSM, .223 mags work as well)
• Remington 700 Long Action (300 Win Mag, 338 Lapua, 338 CIP Mag box is available)
• Savage Short Action — (Both 4.275″ stagger-feed and newer 4.400″ Center feed)
• Savage Long Action (Call for Tech Data)
• Tikka T3 (Long and Short Action)
• Winchester Short Action (All Post 1964)
• Winchester Long Action, Short Box (.308 Win Length)
• Winchester Long Action Magnum Length (7MM Rem Mag and 300 Win Mag)
• Mauser 98 Large Ring action (.308 Win Mag box size)
Single-Shot Loading Blocks just $35.00
CDI has designed a single-shot loading block (SSLB) for use with CDI short action bottom metal kits. The SSLB lets you shoot your rifle in single-shot mode without a magazine. Simply place a round on the black cartridge-holder and close your bolt. This is a good set-up for load testing from the bench, or if you want to shoot very long bullets with a COAL greater than magazine length. CDI’s SSLB costs just $35.00 plus $5.00 shipping.
Share the post "CDI Precision Bottom Metal and Single-Shot Loading Blocks"
Applied Balllistics LLC, run by Bryan Litz, has just released new .308 Winchester Tactical Ammunition. This new ammo employs a brand-new 175gr “Tactical OTM” bullet from Berger Bullets. This new projectile is unique in that it was designed to “fly right” even at transonic and subsonic speeds. The new 175gr bullets are loaded to magazine length (2.800″) in new Lapua brass, so the ammo will fit all popular detachable box magazines in tactical bolt guns and gas guns. Bryan recommends a 1:13″ (or faster) twist barrel.
New Tactical Ammo Has Individually-Weighed Charges and Low ES
Unlike most “factory ammo”, Bryan’s new Tactical Ammo features individually weighed charges. That’s right — the charge for each and every round is weighed before it goes in the case. As a result, the new ammo typically delivers Muzzle Velocity (MV) Standard Deviation (SD) under 10 FPS (for 10 shots). That’s a low number, on a par with quality handloads. Bryan has shot this ammo at 1000 yards through a LaRue OBR AR10-type rifle. The ammo shot under one MOA at 1000 yards. Another benefit of the weighed charges is that this allows the use of high-quality extruded (stick) powders. The stick powders are known to deliver great accuracy while being consistent through a wide temperature range.
Berger’s NEW .30 Caliber 175gr Tactical OTM Bullet
This bullet was designed by Berger Ballistician Bryan Litz specifically to optimize performance of the M118LR class of ammunition. The design objectives were to maximize BC while staying within the 2.800” COAL for magazine feeding, and the requirement for the bullet to remain stable through transonic speeds. All of these design objectives were achieved, according to Bryan. The bullet has a length-tolerant tangent ogive shape, so it is less sensitive to seating depth than secant-ogive bullets.
The BC of this bullet is 7% higher than the 175 grain Sierra MatchKing currently used in most M118LR ammunition, and 2% higher than the Hornady 178 grain option. The average G1 BC of the Berger 175gr Tactical bullet is 0.510 from 3000 to 1500 fps. The G7 BC is 0.259, and is a more accurate representation of this bullets performance over a wide range of speeds. (CLICK HERE to read about G1 vs. G7 BC.)
The Berger 175gr Tactical OTM bullet requires a minimum twist rate of 1:13″ to be stable from the muzzle. Transonic stability was verified from a 20″-barreled LaRue OBR with a 1:11.25″ twist.
Early Tests Show Bullet Shoots Great — Report by Robert Whitley
Robert Whitley got a box of early-run 175gr Tactical bullets. He says they shoot great in his own handloads: “I just received some of the new Berger .30 cal 175gr Tactical OTM (Open Tip Match) bullets. Wow — what great bullets for the .308 Winchester! I did some range testing and these things really shoot! As you can see below, I had a 5-shot group around 0.2″ and, then, shooting prone, I produced a 20-shot group that just tore out the X-Ring.” (NOTE: these targets were shot with Robert’s handloads, not the Applied Ballistics pre-loaded ammo.)
While the words “Open Tip Match” might lead one to believe it has a large open tip, this BTHP bullet actually has a small meplat. Robert suspects that, for this bullet’s potential tactical and military applications, it was felt the words “hollow point” should be avoided in favor of “open tip”.
Bullets Are Positioned Optimally When Loaded at 2.800″ Mag Length
These bullets were also made to be loaded at magazine feeding length in the .308 Winchester (2.800″ OAL). Robert reports: “When loaded at a 2.800″ OAL length, the bullets sit perfectly in the neck of the .308 Winchester, with the full bearing surface of the bullet up in the neck of the case, and the junction of the boat tail and bearing surface of the bullet just forward of the junction of the neck and shoulder of the case.”
If you are going to shoot these bullets and expect them to be supersonic the whole way, a 1:13″ or faster twist is recommended, and if you are going to run them at velocities where they might be subsonic/transonic, Bryan confirmed they’ll work in 1:11.25″ twist barrels. Robert notes that his company, AR-X Enterprises, carries 1:11.25″ twist Bartlein .30 Cal barrels as a regularly-stocked item in both the M24/M40/Rem Tactical contour and the Remington Heavy Varmint/Sendero contour.
Whitley concludes “This is a great offering by Berger Bullets”. While the bullets can be purchased through Berger or Berger’s dealers, the new Applied Ballistics’ loaded ammo should be ordered through Bryan’s website. The price is $40 (plus shipping) for 20 rounds.
CLICK HERE to order through the Applied Ballistics secure shopping cart.
Disclosure: Applied Ballistics LLC advertises Bryan Litz’s Ballisitics Book on this site.
Share the post "New .308 Win (175gr) Tactical Ammo from Applied Ballistics"
Run by Jeff Allen in Florida, CDI Precision Gunworks offers high-quality, mag-capable bottom metal for a wide variety of rifles and action types. The CDI bottom metal kits, priced at $209.00, feature an integrated trigger guard, mag-well, magazine release, and, of course, action-screw locations.
