Do you own an RCBS electronic powder dispenser? If you do, take the time to watch this ChargeMaster Tuning video from 8541 Tactical. This nine-minute video demonstrates how to re-program your Chargemaster to “tune” the dispensing process. The video shows the exact programming procedures to follow, step-by-step. Some folks want a faster powder flow — others tune their machines for a more reliable drop (with fewer over-runs). One cheap and popular modification is to insert a 1″-long section of a McDonald’s straw in the ChargeMaster’s silver dispensing tube. This works surprisingly well to smooth kernel drop and prevent “clumping” that can cause an over-charge. The McDonald’s straw MOD is demonstrated in this video, starting at the 6:22 mark.
Large-Diameter Dispensing Tube Mod
Many folks have had success with the McDonald’s straw modification demonstrated in the above video. However, some folks would like to get even better flow performance (with virtually no clumping). Forum Member Frank B. has come up with a new option using a brass hose fitting with a large outside diameter. The hose fitting (with tape wrapped around the barbed nose section) is placed inside the RCBS dispensing tube (be sure to have some kind of wrap — you don’t want metal-on-metal). Here’s how the unit looks installed:
Frank tells us: “I have found a cure for the over-throw problem. It is a simple 1/4″ barbed hose nipple. I wrapped a couple layers of tape around the barbed end for a snug fit. With this in place, I have thrown 100+ charges of Varget without a single overthrow. The ID of the barbed end needs to be approximately 3/16″ to feed a steady flow. This works because of the larger ID at the drop.”
Frank adds: “You can see in the photo that the powder is not stacking up. You can watch it drop one grain at a time. Hope this will take the aggravation out of your case charging.” For best performance with this brass fitting MOD, we recommend de-burring and smoothing out the front edge of the brass fitting over which the kernels drop.
Brass fitting mod suggested by Boyd Allen. We welcome reader submissions.
At the request of our readers, we have launched a new “Deals of the Week” feature. If this proves popular, we’ll try to run this every Monday. Here are some of the best deals on hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Match photo courtesy Varide Cicognati, Sightron dealer in Italy.
No this 10-50X Sightron isn’t as good as a Nightforce 15-55X Competition scope, but it is definitely good enough to win long-range benchrest and F-Class matches and it is nearly $1400 cheaper than the 15-55X Nightforce. It is even $450 cheaper than the old 12-42x56mm NF Benchrest scope. On a value-for-money basis, then, the Sightron 10-50x60mm makes sense for competitor on a budget. The money you save (compared to a 15-55X NF) will pay for a BAT or Kelbly action, with money left over.
2. McMillan Stocks — Rem-inletted Stocks on Sale
McMillan has a wide variety of inletted fiberglass stocks on sale. If you have a Remington or Rem-clone action you’re in luck. McMillan has dozens of Rem-inletted stocks on sale right now, with prices as low as $400. Above is just a small selection of Rem-Inletted Sale Stocks. McMillan also has bargain-priced stocks for many other kinds of actions.
3. Midsouth Shooter’s Supply — RCBS Rock Chucker Press
This week you can get an RCBS Rock Chucker Supreme Press for just $149.99 at Midsouth Shooters Supply. The Rock Chucker Press is strong and versatile, a design that has stood the test of time. I’ve got a Rock Chucker on my reloading bench that was made in the 1970s and passed down from my brother. It’s still capable of loading 1/4-MOA ammo.
4. Weatherby — Vanguard S2 Typhoon .243 Win
A Weatherby for under $450.00? That’s right. Currently, Grabagun.com offers the Weatherby S2 Typhoon, chambered in .243 Winchester for just $448.22. This rifle features a 24″ barrel, 2-stage trigger (that adjusts down to 2.5 lbs), and a composite Monte Carlo-type stock in Kryptek camo pattern. Weight without optics is 7.25 pounds. NOTE: Limited inventory — check Slickguns.com for other vendors.
5. MidwayUSA — Deluxe Competition Shooting Mat $59.99
We have used MidwayUSA shooting mats, as have many Forum members. This Competition Mat is a good product. The 400 denier, PVC-coated material is durable, the overall size is good, and we like the front flap that can be staked down. MidwayUSA normally sells this mat for about $85.00. Currently, it is on sale for $59.99. It’s hard to find a better padded mat for anywhere near that price.
Unrolled Dimensions: 73-½” Long x 35-½” Wide (Does not include the front flap).
Rolled Dimensions: 8-½” Diameter x 35-½” Wide | Weight: 6.5 lbs.
6. CDNN — Walther PPX M1 9mm for $279.88
It may be ugly, but this Walther PPX M1 is a very good 9mm pistol. This Editor has shot the PPX and, IMHO, it has a better trigger than the Glock, better ergonomics, and better accuracy. Right now you can get this German-made Walther 9mm pistol for under $280.00 — less than half the price of a new Glock. Interested? Then read this Walther PPX Review. It confirms what we’ve said — this is a good pistol.
7. Wideners.com — IMI 9mm Luger, 1000 Rounds for $209.00
This is good ammo, though pretty “hot” (it runs 1102 fps from a 4″ barrel). This Editor has shot a lot of IMI 9x19mm ammunition through Glocks, HKs and Sigs. This ammo is very reliable and reasonably accurate. NOTE: This ammo features lead-core bullets, which may not be allowed in some indoor ranges. This ammo is Boxer-primed and the primer pockets are NOT crimped so you can reload the IMI 9mm brass with no problems. $209.00 for 1000 rounds is a pretty good deal these days.
This is a pretty darn good folding knife, and a killer deal at $15.60 from Amazon.com. Yes your Editor bought one. The semi-serrated stainless steel blade is sharp and holds its edge surprisingly well. The knife comes with a nylon sheath and a Bear Grylls survival guide. Despite its low cost, Gerber offers a lifetime warranty on this knife.
Here is a verified owner’s review: “Most retailers sell it for 30 bucks. This knife is…very sturdy with no blade play and has a good solid feel. The handle is very grippy… [and] fits VERY nicely in the hand. Love Gerber’s serrations… great for cutting rope, cordage and strapping.”
We know you guys like saving money. Here’s a line-up of current money-saving REBATE offers for everything from ammo to optics. You can save as much as $250 off a rifle or $100 off a scope. NOTE: Deadlines vary with the program — some of these rebates are good through the end of 2015, but others expire in a few days! Check rebate/promo details by clicking on the links provided below:
ZEISS Rebates
Save up to $150.00 on select scopes and binoculars during Zeiss Field Days (through 11/17/2015).
Browning Rebates and Promotions
Get $25, $50, $75 or $100 rebates on Browning rifles or shotguns. Also $50-$100 off Browning safes.
Bushnell Rebates and Promotions
Get $100 off Elite 6500 scopes, $80 off Elite 4500 or 3500 scopes, and $50 off Legend Ultra HD scopes. Offer expires October 19, 2015.
Thompson/Center Rebates
Get $75 mail-in rebate on T/C Venture Rifles, now through 12/13/2015.
RCBS Rebates
Save $50 on $300 RCBS tools/accessory purchase or save $10 on $50 RCBS purchase.
Taurus Rebates
Get $25 or $50 rebate with purchase of qualifying Taurus pistol or revolver.
Federal Ammunition Rebates
Two Rebates: Buy a Savage centerfire rifle and get $25.00 rebate on purchase of $50 or more in Federal rifle ammunition. Or, get $10.00 mail-in rebate on Federal Power-Shok or Fusion rifle ammo.
Do you have some old, tired brass that needs a thorough cleaning — inside and out? Consider using an ultrasonic cleaning machine. When used with the proper solution, a good ultrasonic cleaning machine can quickly remove remove dust, carbon, oil, and powder residue from your cartridge brass. The ultrasonic process will clean the inside of the cases, and even the primer pockets. Tumbling works well too, but for really dirty brass, ultrasonic cleaning may be a wise choice.
Our friend Gavin Gear recently put an RCBS Ultrasonic cleaning machine through its paces using RCBS Ultrasonic Case Cleaning Solution (RCBS #87058). To provide a real challenge, Gavin used some very dull and greasy milsurp brass: “I bought a huge lot of military once-fired 7.52x51mm brass (fired in a machine gun) that I’ve been slowly prepping for my DPMS LR-308B AR-10 style rifle. Some of this brass was fully prepped (sized/de-primed, trimmed, case mouths chamfered, primer pockets reamed) but it was gunked up with lube and looking dingy.”
UltimateReloader.com Case Cleaning Video (7.5 minutes):
Gavin describes the cleaning exercise step-by-step on UltimateReloader.com. Read Gavin’s Cartridge Cleaning Article to learn how he mixed the solution, activated the heater, and cycled the machine for 30 minutes. As you can see in the video above, the results were impressive. If you have never cleaned brass with ultrasound before, you should definitely watch Gavin’s 7.5-minute video — it provides many useful tips and shows the cleaning operation in progress from start to finish.
The RCBS ultrasonic cleaning machine features a large 3-liter capacity, 60 watt transducer, and 100 watt ceramic heater. The RCBS ultrasonic machine can be found under $140.00, and this unit qualifies for RCBS Rebates ($10 off $50 purchase or $50 off $300.00 purchase). RCBS also sells 32 oz. bottles of cleaning concentrate that will make up to 10 gallons of Ultrasonic Solution.
In our Shooters’ Forum, a member recently noted that he needed to pull down (disassemble) some ammunition that was loaded incorrectly by one of his shooting buddies. You can use an impact puller to do this task, but if you have more than a dozen rounds or so, you may prefer to use a collet-style bullet puller. These work very quickly and positively, making quick work of big jobs. The efficiency of the collet-style puller is worth the investment if you frequently disassemble ammo. These devices retail for under $25.00 (collets sold separately). Normally, you’ll need a specific collet for each bullet diameter. But collets are not that costly, so this isn’t a big deal, particularly if you only load a few calibers, such as .223, 6mm, and .308.
Hornady and RCBS use different mechanisms to tighten the collet around the bullet. On Hornady’s Cam-Lock Bullet Puller, a lever-arm on the top of the bullet puller serves to tighten the collet around the bullet. Simply rotate the lever from the vertical to the horizontal position to grab the bullet. Lower the ram to remove the case. The bullet will drop out when you return the lever arm to the vertical position. This is demonstrated in the video below:
Father’s Day is June 21, 2015, less than a week away. If your father enjoys the shooting sports, here are some recommended items that every shooter can use. All selections cost less than $100.00. It’s not too late to order. If you have an Amazon Prime membership, you can get two-day shipping in most areas of the country. For non-Prime members, most items will ship in 3-4 days. That’s enough time to get the gift to “Pops” by next Sunday.
The light-weight, compact RCBS Partner Press is ideal for loading at the range. It can easily be mounted to a bench with C-Clamps.
Note that Erik has fitted a cartridge tip on his RCBS ChargeMaster’s dispensing tube.
Erik Cortina has been fiddling around with his RCBS ChargeMaster and he discovered something interesting. Through a series of tests he determined that the ChargeMaster dispensed slightly more precise charges when he trickled the last few 10ths of a grain on to the RCBS pan. Erik wasn’t expecting this result, but he confirmed there may be a slight benefit to this trickling method (as opposed to allowing the ChargeMaster to dispense the full charge).
We should note that Erik’s preferred method of weighing powder is to first dispense a slightly lower charge with the RCBS, transfer the pan to a laboratory-class Sartorius magnetic force restoration scale, then trickle up with his Omega (Dandy Products) Powder Trickler. However, if you don’t have a $800+ laboratory-grade scale, you might just try trickling on to the ChargeMaster pan. You can see Erik’s test procedure in this video:
Gunsmith Darrell Holland has invented an interesting upgrade to the RCBS Auto Bench Priming Tool. If your hand starts to hurt after priming dozens of cases with a hand-held, squeeze-type priming tool, you may want to consider Holland’s invention, which he calls the “Perfect Primer Seater” (PPS).
Holland basically has modified the RCBS lever, adding a precise crush control and a means of measuring depth with a gauge. He claims this gives “an EXACT primer seating depth based on primer pocket depth and primer thickness”. With Holland’s PPS, primer seating depth is controlled with a rotating wheel that limits lever travel in precise gradations. You can buy the complete priming system for $215.00, or, if you already own the RCBS Auto Prime tool, you can purchase an adapter kit (with base, arm, adjuster, and gauge etc.) for $120.00. To order, visit Hollandguns.com then click on “Reloading Equipment”.
The $52.99 RCBS Precision MIC is a well-made and useful tool for measuring cartridge headspace and bullet seating depth. The Precision Mic measures from a datum point on the case shoulder to the base. Unfortunately the Precision MIC is not specifically made for the 6mmBR Norma, 22BR, 6XC or 6.5×47 Lapua cases. Don’t despair. Reader Caduceus devised a clever way to adapt a .308 Win Precision Mic for short cases that match the .308 Win in rim diameter and case body diameter. He simply creates a spacer out of a pistol cartridge. He trimmed a 9mm case to 0.511″ and “found this to be a perfect fit which gave a zero micrometer reading when the FL-sized 6BR case was placed in it.” We expect many readers already own a Precision Mic for their .308s. Now you can adapt this tool for the 6BR family of cartridges, for no extra cost. Cut the spacer shorter for the 6.5×47 Lapua and 6-6.5×47 cartridges.
How to Use the Precision Mic with a Spacer Caduceus explains: “I can use the .308 version of the RCBS Precision Mic to compare brass which has been fully sized in my 6BR body die with brass which has been fired in my chamber. With the spacer inserted, FL-resized cases mic 0.000″ at the datum point on the shoulder. Using the same set-up, fire-formed cases measure +0.005″. In other words, my chamber has a headspace of +0.005″ above minimum dimensions. This is fairly typical of a custom rifle set up for switch-barrel use. If I were to FL-resize my brass down to minimum spec each time, this excessive working would shorten its life-cycle and might lead to case head separation. Now that I know the headspace of the chamber, I can substitute the standard shell holder on my press with a Redding +0.004″ competition shell-holder. This ensures that my cases only receive 0.001″ of shoulder set-back.”
Click HERE for a full article explaining how to adapt an RCBS Precision Mic for use with a 6BR. You can do the same thing with a 6XC or 6.5×47 case–just cut the spacer to a shorter length (for an 0.000″ mic reading). Note: You can also use this procedure with an RCBS .243 Winchester Precision Mic.
You may not have heard of Vista Outdoor (NYSE: VSTO), but you’ll know many of the brands under its corporate umbrella: Alliant Powder, Blackhawk, Bolle, Bushnell, CCI, Federal Premium, Outers, RCBS, Savage Arms, Simmons, Speer, Weaver. To learn more about Vista Outdoor’s operations and products, visit www.vistaoutdoor.com or Vista Outdoor’s Facebook Page.
So what is Vista Outdoor? This corporate giant used to be the sporting division of ATK (Alliant Techsystems*). In February of this year, ATK split into two separate companies. The outdoor sports/hunting/shooting brands (with annual revenues of $2.3 billion) were consolidated into Vista Outdoor. The aerospace/military contract operations of ATK were continued in a second company, Orbital ATK. Vista Outdoor, now head-quartered in Clearfield, Utah, is a standalone, publicly-traded outdoor sports and recreation company with approximately 5,800 employees worldwide.
In a recent interview with GearJunkie.com, Vista Outdoor’s Chairman/CEO Mark DeYoung revealed that Vista Outdoor will release scores of new products in 2015:
Q: Looking ahead for this year, what to-be-released products are you most excited about?
A: Bushnell has a rangefinder for golf that is innovative. We introduced it at the PGA Show. The A17 rifle from Savage is big news — we sold out of a whole year’s capacity at the SHOT Show. Overall, there are about 130 new products coming this year from our brands[.]
Vista Outdoor Started Trading as VSTO on February 10, 2015
Vista Outdoor “went live” as a separate, publicly-traded company on the New York Stock Exchange on February 10, 2015. Here is the official press release:
Vista Outdoor Inc. (NYSE: VSTO), which previously operated as the Sporting Group of Alliant Techsystems Inc. (“ATK”), announced today the successful completion of its spin-off from ATK (NYSE: ATK) into a standalone, publicly traded outdoor sports and recreation company.
On February 9, 2015, ATK distributed to its stockholders two shares of Vista Outdoor common stock for every share of ATK common stock held as of record on February 2, 2015. Vista Outdoor common stock will begin “regular-way” trading under the symbol “VSTO” on the New York Stock Exchange (“NYSE”) today, February 10, 2015, when markets open.
“Today marks the creation of a new leading commercial and consumer-products company focused on innovative solutions, strategic customer partnerships, execution excellence and creating long-term shareholder value,” said Mark DeYoung, Vista Outdoor Chairman and Chief Executive Officer. “Our consumers depend on our products to deliver quality and performance in a variety of outdoor environments and activities. Our mission is to bring the world outside, and to support and facilitate the success of outdoor enthusiasts as they strive to achieve their own rugged independence.”
About Vista Outdoor Inc.
Vista Outdoor is a leading global designer, manufacturer and marketer in the growing outdoor sports and recreation markets. The company operates in two segments, Outdoor Products and Shooting Sports, and has more than 30 well-recognized brands that provide consumers with a wide range products in the ammunition, firearms and outdoor accessories categories. Vista Outdoor is headquartered in Utah and has manufacturing operations and facilities in 10 U.S. States, Puerto Rico, Mexico and Canada.
*Alliant Techsystems Inc. (ATK) came into being as an independent company in 1990 when Honeywell spun off its defense businesses to shareholders. ATK got into the ammo business in 2001 when it acquired Blount International. ATK grew with later acquisitions of Weaver Optics (2008), Blackhawk (2010), Savage Arms (2013), and Bushnell (2013).
Story tip by EdLongrange. We welcome reader submissions.
Caduceus explains: “I can use the .308 version of the RCBS Precision Mic to compare brass which has been fully sized in my 6BR body die with brass which has been fired in my chamber. With the spacer inserted, FL-resized cases mic 0.000″ at the datum point on the shoulder. Using the same set-up, fire-formed cases measure +0.005″. In other words, my chamber has a headspace of +0.005″ above minimum dimensions. This is fairly typical of a custom rifle set up for switch-barrel use. If I were to FL-resize my brass down to minimum spec each time, this excessive working would shorten its life-cycle and might lead to case head separation. Now that I know the headspace of the chamber, I can substitute the standard shell holder on my press with a Redding +0.004″ competition shell-holder. This ensures that my cases only receive 0.001″ of shoulder set-back.”
