If you are looking to compete in NRL22 or PRS rimfire tactical matches, there is a new, turnkey solution that combines the legendary Anschutz 54 rimfire action with the excellent MDT ACC chassis. Called the Anschutz Model 1710, this new competition-ready rifle is capable of winning matches right out of the box. Creedmoor Sports recently received the first set of model 1710s in the USA. At our request, Creedmoor’s Brent Books and Wayne Dayberry field-tested a new model 1710. After confirming the elevation click values for various yardages, Brent put the Anschutz through its paces, showing its superb accuracy. FYI, this 1710 came with an impressive factory test target — 10 shots at 50 meters, all in a dime-sized circle.
Shooting at the CMP Talladega Marksmanship range, Brent ran a sequence of shots, hitting steel at 100, 150, 200, 250 and 300 yards without a miss. You can see this 5-shot sequence, all in one continuous take (no edits), in the video below. As Brent observed, “it definitely shoots”. Then, later, Brent cranked in more elevation (21.1 MILs) and hit steel at 435 yards. Watch this all in the video — it’s impressive!
Anschutz 1710 at Talladega, Drilling Steel from 100 to 435 Yards
Watch Hits at 100, 150, 200, 250, 300, and 435 Yards
With RWS 100 .22 LR ammo, Brent drills hit after hit with no misses out to 300 yards.
“This video shows a run after we confirmed our dope. Brent Books and I are shooting an NRL22 match in two weeks. Although he has extensive smallbore and airgun experience, this will be his first match of this type. I thought it would be a good/fun exercise for him to run the plates fairly quickly and also showcase the performance of this rifle system at the same time on the video.” — Wayne Dayberry
Anschutz Model 1710 — Great Accuracy Right from the Start
Report by Wayne Dayberry
The Anschutz 1710 MDT ACC rifle system is purpose-built for smallbore tactical precision rifle competition. With its capabilities we went from from bore-sight to 300 yards in just 12 shots. We started with a factory-fresh .22 LR Anschutz 1710 in an MDT ACC Ghost Gray chassis. This rifle incorporates a 20-inch heavy profile threaded stainless barrel and the 5119 two-stage trigger. After a clean, lube, and inspection, we mounted up an Element 5-25x56mm First Focal Plane optic we already had in a set of rings and headed out to the CMP Talladega Marksmanship Park. In addition to traditional target ranges, the CMP range has an unknown distance steel range with targets out to 600 yards. Due to a compressed schedule, we did not have time to follow the traditional zeroing and velocity-gathering processes, so we headed straight to the unknown distance steel range. This range has steel from 75 yards to 600 yards much like you would see in PRS and NRL type competitions.
Given the compressed timeframe, we didn’t follow the traditional steps one would normally take to do a break-in process, zero, collect data, and build out rifle dope. We were essentially doing all of that on a steel target range as we were putting the first rounds down the barrel while shooting this piece. At the same time, with a quality rifle system, and following a process, it worked out well as we were able to stretch out the capability of this rifle to 435 yards very quickly.
Anschutz 1710 Components and Specifications:
The new Anschutz model 1710 is built with premium components top to bottom. It features an Anschutz Match 54 repeater action with blued receiver, Anschutz 5119 two-stage trigger, 20″ stainless steel barrel, and MDT ACC alloy chassis with built-in rails. The chassis is adjustable for LOP and cheek height.
Receiver: Scope mount attachment with 11mm rail and drilled and tapped
Barrel Length: 20″ stainless steel heavy barrel, no iron sights
Chamber: Optimized Match Chamber
Crown: Recessed Target Crown
Muzzle Diameter: 0.90″
Trigger: New 5119 Two-Stage Trigger
Trigger Weight Range: 4 oz. to 7.5 oz. (110 to 215g)
Trigger Weight: Adjusted to 6.35 oz. (180g)
Magazine Capacity: 10
Magazine Release: Extended
Rifle Weight without scope: 10 lbs., 10 oz.
This photo shows the Anschutz 1710 fitted with bipod and suppressor. The tripod clamps via the integral forearm ARCA rail.
Testing the Anschutz 1710 on Steel — Expedited Procedure
The closest steel on the Talladega range that day was 75 yards so we started from scratch at that distance. Brent was on the rifle, so I spotted and ran ballistics. After bore-sighting at 75 yards, and confirming zero on steel with a few rounds, we went to the ballistic solver to start a profile. For the RWS R100 ammunition we were running, I entered a G1 BC of .14 and a guess at the muzzle velocity of 1080 FPS. The call of 1.1 MILs for the 100-yard steel resulted in Brent’s shot landing .2 MILs high of center on the first round; we “confirmed” 0.9 MILs. We noted the impact and moved on to 150 yards.
As I mentioned we were very short on time so the “confirmations” of our dope for our first pass were with a single shot and measuring in the reticle. That’s obviously not the normal process, but for us, it was good enough for this exercise, given the time we had. We were shooting on freshly-painted targets and getting excellent feedback to see POA / POI deviations and could easily measure this in the reticle, which helped. And we were shooting a top-of-the-line Anschutz which came with a confirmation test target showing a 10-shot group at 50 meters with all shots touching and within a circle the size of a dime. With a former NCAA All-American smallbore shooter running the gun, and this test target in hand, confidence was high.
Moving to the 150-yard target, a call of 3.7 MILs hit 0.6 high on our first round so we measured and confirmed 3.1. We trued the muzzle velocity in the solver as we went. At 200 yards I called 6.0 MILs and the first round hit was .3 high. We measured and confirmed 5.7 MILs. 9.0 mils was the call at 250 yards and we hit just a bit high. After measuring, we confirmed 8.6 MILs. At 300 yards, Brent was holding about 1 mil wind as a storm started rolling in. I called 12.5 MILs elevation and the first round impact was near the top of the plate, and after measuring we confirmed a come up of 11.7 MILs.
The net result was this — we went from mounting the optic and bore-sighting, to making solid first-round impacts from 100 yards out to 300 yards, at each 50-yard increment, in just 12 rounds! That’s efficiency!
Stretching it out to 435 Yards on Steel
Later, we went on to make solid hits at 350 yards and 435 yards. I got on the gun and put two on top of each other at 350 yards — pretty cool. This just proved this gun is an absolute hammer. The 435-yard target was a bear target, which was quite a bit larger than the 12″ steel we were shooting in the video. Not a small target by any means, but we were shooting 435 yards with a rimfire rifle as a storm rolled in. I think between us, Brent and I hit 5 of 6 (at 435 yards) which was pretty good given the sporty conditions. Next stop… the 600-yard plates at the end of this range. That’s a come-up of about 36 Mils.
Rimfire Maintenance — Tips from a Top Competitor
An NCAA All-American smallbore shooter, Brent Books knows a thing or two about rimfire rifles, and how to maintain optimal accuracy. Brent told us: “I shot on the rifle team at Jacksonville State University so 500 rounds a week was common through my Anschutz 2013. I’d clean my rifle at the end of each week before we travelled to a competition with a wet patch through the barrel, a few passes of the nylon brush (unscrewing the brush before pulling it back through), one more wet patch, and then dry patches until they came out clean. A bore guide was always used to protect my action from debris and to align the cleaning rod. After cleaning the barrel, I’d completely disassemble the bolt to clean and lube it, making sure the bolt would glide effortlessly in the action. After cleaning, I’d shoot a minimum of 50 rounds to foul the barrel with ammo I was using to compete.”
Anschutz Model 54 Action with 5119 Trigger
The Anschutz 1710 features the competition-proven Model 54 action, running a 10-round magazine. In the 1710, the safety-equipped action is fitted with an outstanding 5119 two-stage trigger that adjusts from 4 to 7.5 ounces. First released in 1954, Anschutz Match 54 action still represents a benchmark for smallbore rifles. Match rifles fitted with Model 54 actions have captured numerous World Championships and Olympic medals. These actions are smooth, consistent, and ultra-reliable, making them a great choice for multiple smallbore rifle disciplines. Anschutz boasts that this action has: “solid, extremely reliable construction [with] a functional safety that does not fail even under the most adverse conditions.”
MDT Adjustable Core Competition (ACC) Chassis
What’s so cool about the MDT ACC Chassis? MDT’s ACC chassis is optimized for NRL and PRS shooting formats, although it can be used in other disciplines. The ACC chassis design has been optimized with input from top PRS and NRL shooters. Key features include: full 17″ ARCA/RRS fore-end, flared magazine well, extended barricade stop, widened thumb shelf, adjustable cheek riser, adjustable length-of-pull, and adjustable MDT Vertical Grip Elite.
The ACC boasts an integrated weight management system, allowing shooters to fine tune chassis weight and balance. Weights can be added to the buttstock, the fore-end interior or fore-end exterior. This allows the shooter to increase the chassis-only weight from 4.5 lbs up to 12.3 lbs. Complete with barreled action, scope, rings, bipod, and accessories, shooters can run 20+ lbs for the full rig.
The weight can be tuned without taking the barreled action out of the chassis. Internal fore-end weights can be inserted from the front of the fore-end and screwed in place, while external M-LOK-compatible weights can be easily attached on either side of the fore-end. This ACC weight-management system allows shooters to rapidly adjust the feel and recoil characteristics of their system.
Recommended Accessories
Creedmoor Sports stocks a large variety of products that can be used with the Anschutz 1710. Below you’ll find the Element Titan 5-25x56mm FFP MRAD scope, Soup Can Sandbag, and RWS R100 Ammunition used for the Anschutz 1710 testing featured here. Click each item below for more product information:
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
With NRL22 and the new PRS Rimfire Series, interest in rimfire tactical competition is growing fast. There is also great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire training. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for five cents a round. Compare that to fifty cents (or more) for handloads and maybe $1.20 per round for factory ammo.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
More Free Targets…
These and many other free targets are available at MyTargets.com.
Share the post "FREE Fun Targets for Rimfire Precision and Tactical Training"
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful so the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a major success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 200 rimfire competitors. And now there is a companion rimfire long-range series, NRL22X. Learn more about NRL22 and NRL22X at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are five (5) classes: Open, Base, Ladies, Young Guns (8-16) and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1200.00 (so you could spend $700 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The NRL also sponsors NRL22X matches. These involve significantly longer distances for greater challenge. The latest NRL22X match is the XLR Rimfire Rumble, to be held in Grand Junction, Colorado this Saturday, September 18, 2021.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
How to Participate in NRL22 and/or NRL22X
If you want to get started in NRL22 or NRL22X competition, you’ll need an NRL22 annual membership. These run from $25-$85 depending on class and discipline. CLICK HERE for annual membership information.
NRL22 Membership Benefits Include:
– Eligibility to participate in all NRL22 matches
– Eligibility to participate in all NRL22X matches
– Welcome gift (not all welcome gifts are the same)
– Scoring and Ranking for all events
– Newsletters and updates
– Eligibility for special NRL22 raffles and giveaways
– Access to special NRL discounts from participating sponsors
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from each of the four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
To facilitate consistent NRL22 match scoring, there is an official NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed hangers. That’s lot of steel and hardware for $394.99. There is also an official 2020/2021 Expansion Target Package with 5 more hanging targets for $79.95.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
Share the post "NRL22 & NRL22X — Fun and Challenging Rimfire Tactical Series"
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
We’re seeing great interest in NRL22 competition as well as .22 LR rimfire tactical cross-training . With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire training. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for five cents a round. Compare that to fifty cents (or more) for handloads and maybe $1.20 per round for factory ammo.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
NRL22 Competition — Tactical Rimfire Matches
The NRL22 match format is a great shooting discipline. NRL22 offers a high fun factor at relatively low cost. You don’t have to reload match ammo. A couple of 50-round boxes of .22 LR ammo will get you through the match. While some people bring lots of gear to matches, that’s by choice and not by necessity. You can keep it simple and still be competitive (and win).
Tips for NRL22 Competitorsby Jonathan Ocab
I am a match director at my gun club and run our local NRL22 matches. People often ask me for tips for competing in NRL22. First, I recommend getting the course of fire for the month in advance and practicing those stages at the range. Here are other specific tips that should help NRL22 competitors improve their gun-handling and match results.
1. Dry Fire Practice — If you are not able to do live fire practice at the range, I encourage shooters to practice their shooting positions at home via dry fire. Setup props or barricades with pasters or other faux targets on a wall in the garage or inside the house and run through each stage.
2. Scope Magnification Level — The most common issue I see with newer shooters in NRL22 is the tendency to maximize their scope magnification. The timer will start, and the shooter gets into position on a target, but the scope is set to 15x or higher and the shooter can’t find the target. The shooter lowers the magnification, locates the target, and then increases the magnification again, takes the shot, transitions to another target, and repeats the process of decreasing magnification, locating target, etc. Novice NRL22 shooters should try using the mid-range magnification. Try shooting 7x-12x and learn to balance field of view and target image.
3. Support Side Shooting — NRL22 matches often include support-side shooting stages. This requires you to shoot with your opposite (non-dominant) hand and eye. I often hear people complain about shooting support-side. My only real tip for this is to actually spend time at the range shooting this way. Practice makes perfect. It’s all a question of learning how to shoot again and using fundamentals. Learn to get a consistent cheek weld and consistent eye relief. If necessary, figure out if you need to set your scope’s diopter for your opposite eye and mark it on the scope.
Share the post "Free Rimfire Tactical Targets — Cross-Train with a Purpose"
The .22 Long Rifle (.22 LR) is the planet’s most popular ammunition type and firearm chambering. The .22 LR is used in the Olympics by 3P marksmen, but it also serves benchrest competitors, NRL22 shooters, backyard plinkers, small-game hunters, and tactical trainers. With the expansion of NRL22 matches (and the PRS equivalent), the humble .22 LR is undergoing a major resurgence in the USA. And with centerfire powders and reloading components so difficult to find these days, many folks are shooting less centerfire, but way more rimfire.
With the growth of rimfire tactical competition and the rising popularity of rimfire silhouette shooting, the .22-Caliber rimfire rifle is more popular than ever. This new Gun Digest book covers the latest trends in rimfire hardware. Every major gun manufacturer has brought at least one new rimfire rifle to the market in the last two years. These new models are covered in detail. Other Key topics included in this new, full-color book include: rimfire semi-autos and how they work; bolt-action accuracy; match shooting skills; DIY precision gunsmithing; hunting with rimfires; and the future of the rimfire market.
This 272-page book also covers .17-caliber rimfire cartridges: 17 HM2 (Mach 2), 17 HMR, and 17 WSM. These are all excellent varmint rounds, with the 17 WSM effective out to 250 yards. The 17 HM2 will run in a normal .22 LR action and feed from standard .22 LR magazines. So, for most rifles, all you need to do a .22 LR to 17 HM2 conversion is a barrel switch. That gives your rimfire rig twice the versatility. Shoot .22s and .17s with the same gun.
NRL22 — Challenging Practical Competition with .22 LR Rifles
The USA has seen a big growth in rimfire tactical matches over the last four years. Right now there are probably ten times as many rimfire tactical matches as actual sanctioned PRS and NRL centerfire matches. The reason is simple — ammo is much less costly, and you run a challenging rimfire tactical match at nearly any shooting range that allows shooting out to 200+ yards.
NRL22 Competition — Tactical Rimfire Matches
The NRL22 match format is a great shooting discipline. NRL22 offers a high fun factor at relatively low cost. You don’t have to reload match ammo. A couple of 50-round boxes of .22 LR ammo will get you through the match. While some people bring lots of gear to matches, that’s by choice and not by necessity. You can keep it simple and still be competitive (and win).
Tips for NRL22 Competitors by Jonathan Ocab
I am a match director at my gun club and run our local NRL22 matches. People often ask me for tips for competing in NRL22. First, I recommend getting the course of fire for the month in advance and practicing those stages at the range. Here are other specific tips that should help NRL22 competitors improve their gun-handling and match results.
1. Dry Fire Practice — If you are not able to do live fire practice at the range, I encourage shooters to practice their shooting positions at home via dry fire. Setup props or barricades with pasters or other faux targets on a wall in the garage or inside the house and run through each stage.
2. Scope Magnification Level — The most common issue I see with newer shooters in NRL22 is the tendency to maximize their scope magnification. The timer will start, and the shooter gets into position on a target, but the scope is set to 15x or higher and the shooter can’t find the target. The shooter lowers the magnification, locates the target, and then increases the magnification again, takes the shot, transitions to another target, and repeats the process of decreasing magnification, locating target, etc. Novice NRL22 shooters should try using the mid-range magnification. Try shooting 7x-12x and learn to balance field of view and target image.
Share the post "Rimfire Revolution — New Book Releasing Soon"
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
We’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire training. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for five cents a round. Compare that to fifty cents (or more) for handloads and maybe $1.20 per round for factory ammo.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
More Free Targets…
These and many other free targets are available at MyTargets.com.
Share the post "FREE Targets for Rimfire Games and Tactical Cross-Training"
Bushnell has introduced an impressive new riflescope, the Match Pro. Designed for PRS, NRL, and NRL22 competition, this new 6-24x50mm FFP scope promises great performance for a very affordable, under-$500 price that fits within NRL22 “base rifle” price limits.
The new Match Pro series promises high-end features at entry-level price points: $499.99 (Illuminated) and $449.99 (Non-Illuminated). Standard features include: Parallax Down to 10 Yards, Etched Glass FFP MIL “Christmas Tree” Reticle, Locking Turrets, Tool-less Zero Reset,and Fully Multi-Coated Lenses.
“As more and more people enter into the world of precision matches, be it through the NRL22 or PRS, the need for a budget-minded scope… has never been greater,” said Greg Palkowitsh, Bushnell scope product manager. “The Match Pro riflescope [gives] shooters all of the features they need while still qualifying for base class and open class competition.” The Match Pro’s sub-$500 price point works with many of today’s top rimfire rifles to fall under the $1050 limitation for NRL22’s Base Class.
Bushnell Match Pro Standard Features:
First Focal Plane (FFP) Design
6-24 Power for 4X Zoom Ratio
30mm Main Tube
Locking Turrets with Tool-less Zero Reset
Side Parallax from 10 Yards to Infinity
10 MIL Locking Turrets with Tactile Clicks
18 MIL of Windage and Elevation Travel
Deploy MIL FFP Etched Glass Reticle
Fully-Multi Coated Optics
EXO Barrier™(weather protection)
Both the illuminated and non-illuminated Match Pro models will be available early May, 2020. CLICK HERE to visit the Match Pro product page which has detailed information and hi-rez photos. NOTE: First production will be limited, so Bushnell encourages consumers to sign up to be notified when the Match Pros are available.
Share the post "Bushnell’s New Match Pro — Big Performance, Small Price"
We love the NRL22 rimfire tactical series. When you consider the amount of fun you experience per dollar expended, NRL22 .22LR rimfire competition is hard to beat. You enjoy the challenge of PRS-type shooting at reduced distances, and much reduced cost. In the NRL22 series you can be completely competitive with .22 LR ammo costing 15 cents a round. That’s a fraction of what you’d spend making your own centerfire handloads, or buying match-grade, factory-loaded centerfire ammo.
There’s a new option for NRL22 competitors competing in the Open Class. Modular Driven Technologies (MDT) now offers its ACC Chassis for the popular CZ 457 series of rimfire rifles. There are nine different CZ 457 variants currently offered. You can get the CZ 457 Training Rifle for around $400 (MSRP is $449.00). Simply install your CZ 457 barreled action in the MDT ACC chassis and you’re got a high-quality rimfire system with ergonomics that duplicate a full-size centerfire ring. NOTE: MDT also offers an ACC chassis that fits the CZ 455 series, predecessor to the CZ 457. The ACC CZ 457/455 chassis systems cost $999.00 — too expensive we think, but then quality ain’t cheap. Purchase from MDTTAC.com.
MDT ACC Chassis System (Shown with Centerfire Actions)
The MDT ACC (Adjustable Core Competition) Chassis was designed around an integrated, modular weight system that allows shooters to fine tune chassis weight and balance point. A series of weights (up to 9 lbs. of steel) can be added to either the buttstock, interior fore-end or exterior fore-end. With action, barrel, scope and accessories, shooters can configure their rifles upwards of 25-30 lbs. in the ACC. Other features include: full 17” ARCA/RRS fore-end, flared mag well, extended barricade stop, widened thumb shelf, and adjustable cheek riser/length of pull.
Share the post "Hot Ticket for NRL22 — CZ 457 or CZ 455 in MDT ACC Chassis"
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful and the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 150 rimfire competitors. Get more info at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are Five (5) classes: Open, Base, Ladies, Young Guns (8-16), and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1050.00 (so you could spend $550 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from each of the four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
This video reviews the official NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed Hangers. That’s lot of steel and hardware for $329.99.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
Share the post "NRL22 Rimfire Tactical Matches are Fun and Affordable"
Don’t worry — you can get this gun in eight different Cerakote colors: black, bronze, flat dark earth, gunmetal, marine red, NRA blue, green, and tungsten.
To succeed at the PRS game you need position shooting practice — and lots of it. Thankfully you can train affordably using a .22 LR rimfire rig. Decent rimfire ammo can be purchased for 7 to 10 cents per round, an order of magnitude cheaper than centerfire ammo. For the best results, you’ll want your rimfire trainer to sport the same ergonomics and “feel” as your centerfire match rifle. You can get just that Masterpiece Arms 22BA, a “turn-key” PRS rimfire cross-training rig. The MPA 22BA Bolt Action Rifle combines the proven CZ 455 action with a custom Spencer barrel and modern MPA modular chassis. With this chassis you can easily adjust length of pull, butt-pad height/cant, and cheek riser position. Chambered in .22 LR, the MPA 22BA Bolt Action Rifle can change to .22 WMR and 17 HMR through a simple barrel change. So, this gun can do double duty as a .22 LR trainer and a 17 HMR varmint slayer. Basic MSRP is $1850.00.
The MPA 22BA Bolt Action Rifle is available with numerous rugged Cerakote finishes: black, burnt bronze, flat dark earth, gunmetal, marine red, NRA blue, sniper green, and tungsten. Custom Cerakote colors cost $135 extra for the chassis body and/or $65 for the barreled action.
The CNC-machined MPA chassis has some very cool features: enhanced vertical grip, thumb notch, built-in bubble level, MPA trigger shoe, and spigot mount with lower-mounted Picatinny rail. The rig comes with a D.I.P. +25 MOA Picatinny scope base and you can add side Picatinny rails, as well as increase the distance from the spigot-mounted bipod to the rear support. The chassis is also compatible with a barricade stop system, an extra-cost option.
Why rimfire cross-training? Because this stuff is ten cents per round. Premium handloads can run $1.00/round (counting brass depreciation), and the best factory ammo can cost over $2.00/round.
A Rifle is Only As Good As Its Barrel
The key to accuracy for any rimfire rifle is a great barrel. The MPA 22BA Bolt Action Rifle includes a precision drilled, reamed, and honed Spencer / MPA rifle barrel made from 416RQ stainless steel. The hand-lapped barrel is inspected with a video borescope. The chamber is indicated within 0.0001” or less to the bore of the rifle.
Share the post "Tactical 22 — MPA Rimfire PRS Trainer With CZ Action"
The relatively new Ruger Precision Rimfire has generated considerable interest because it is an affordable, chassis-style platform well-suited for tactical/practical cross training. It also offers some cool features including a +30 MOA scope rail and adjustable bolt throw length (from 1.5″ to ~3.0″). The adjustable bolt lets you switch to a longer, centerfire-style bolt “run” for consistent cross-training. That’s clever.
Introduced at the beginning of 2018, the Ruger Precision Rimfire has now been in the hands of multiple reviewers who have tested the little rifle for accuracy, reliability, and functionality. This smallbore chassis rifle has been tested with a variety of ammo and in both bench and “tactical” style sessions. Here are three videos that put the Ruger Precision Rifle though its paces.
VIDEO ONE — Impressive Accuracy Suppressed from Bipod at 130m
In this video, a UK-based shooter tests the Ruger Precision Rimfire with a suppressor. He came away mighty impressed with the rig’s accuracy, stating: “It is a flippin’ laser. Oh my god I’m impressed with that — five minutes in and it’s grouping literally like that [makes small “OK” sign with thumb and index] on the steel at 130m”. (Time-mark 2:40+)
VIDEO TWO — 22 Plinkster Explains Gun Features
In this video, popular YouTube gun tester 22 Plinkster explains the Ruger Precision Rimfire’s features in detail. Then he puts an early production example through its paces. He gets good accuracy from a bench, but also tries some off-hand shooting, demonstrating the rifle’s suitability for tactical cross-training.
With Federal Gold Medal Ultra-Match, 22 Plinkster produced a 5-shot group well under half-inch (with first three overlapped and the last two in same hole) at 50 yards. Note 22 Plinkster’s bench set-up. He uses a second rabbit-eared sandbag in the FRONT. This “field expedient” solution is clever. The front bag’s ears mate well with the rifle’s tubular fore-arm, adding considerable stability. And the front sand-bag helpd absorb vibration, always a good thing. For a varminter who doesn’t want to carry a bulky front rest, this is worth trying. The bag in front functions like a compact version of the large, heavy Bulls Bag.
VIDEO Three — Five Ammo Types and Front Rest
Here is detailed review from Down-Under that was positive. From bench, with Caldwell front rest, five different ammo types were tested: SK Rifle Match, SK Standard Plus, Eley Match, Eley Edge, and CCI High Velocity. The tester reports: “I was able to get 0.9″ 10-shot groups at 50 yards and 1.5″ 10-shot groups at 100 yards using Eley Edge. Overall the rifle is good but I don’t honestly think I achieved any greater accuracy over my standard Ruger American Rimfire Rifle.” We think that’s a fair assessment. This is an accurate rifle, but other affordable bolt actions can probably rival the accuracy, so the buying decision should be based on the rifle’s other features — such as the chassis.
For Ruger Precision Rifle owners, this .22 LR offers ergonomics just like their centerfire rig. This PRS-style .22 LR rig has some very interesting features, including adjustable bolt throw that lets shooters change from a rimfire 1.5″ bolt throw to a short-action centerfire 3″ bolt throw, reducing the chance of short-stroking your bolt in competition. The Ruger Marksman trigger adjusts from 2.25 to 5.0 pounds.
RUGER PRECISION RIMFIRE Important Features:
Quick-Fit Stock with adjustable cheekpiece and adjustable LOP
18″ barrel, pre-threaded for brakes and Silent-SR® suppressor
Barrel can be removed and replaced easily with AR-style tools
Picatinny scope rail with +30 MOA built-in elevation
Front 15″ free-float M-Lok handguard
Adjustable Trigger 2.25 to 5 pounds
Accepts all Ruger 10/22 magazines
Share the post "Video Showcase — Field Tests of the Ruger Precision Rimfire"
So many options… How do you select the shooting discipline that’s best for you? Of course, “Fun is number one”. But you also need to consider cost — the “bang for the buck”. Or in more scientific parlance, the “Fun to Cost Ratio”. Yes, shooting a .50 BMG is fun, but you could be spending as much as $5.00 per round for factory loads! By contrast, your cost per shot in a rimfire fun match might be well under ten cents, as decent ammo can be easily found for under $5.00 per 50-count box. Five bucks per box (of fifty) sure beats five bucks per round!
We believe in the benefits of rimfire cross-training. With a rimfire rifle that has the same ergonomics and “feel” as your centerfire rig, you can practice more often and more affordably. You can get decent rimfire ammo now for as little as seven cents per round*. Compare that to centerfire factory ammo at $1.40/round or handloads for about $0.70 (bullet, primer, powder, and brass depreciation). So even your handloads could cost TEN times as much as pretty good rimfire ammo. That’s an order of magnitude boys and girls.
For a tactical cross-trainer, you want a rimfire rig that feels like your centerfire rifle. McMillan now offers a stock that fits the bill. McMillan’s new A5-22 stock shares the same look and feel as McMillan’s popular A5 centerfire stock. The A5-22 is able to accommodate 10/22 type actions including KIDD 10-22 models with rear tang attachments. McMillan says: “The A5-22 is dimensionally the same as our standard A5 with some minor changes in the tang and floor plate areas. It is available in a fixed comb configuration or with an adjustable saddle-type cheek piece.”
A used Biathlon trainer works great for rimfire practical matches. This is the Anschutz Model 64-R. Note magazine caddy on forearm. This rifle was a dream to shoot.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Game Theme Commercial Targets — Fun and Colorful
Here are some colorful commercial fun targets, well-suited for rimfire practice. These game-theme targets from Champion should be very popular with kids. You can blast aerial drones, hunt dinosaurs, play a game of “H-O-R-S-E”, or shoot ducks in a Carnival Shooting Gallery. These targets, which cost $5.45-$5.95 per 12-pack, are ideal for younger shooters in your family (and fun for grown-ups too).
* We recently scored 1500 rounds of Norma Match-22 ammo for $99.99 from MidwayUSA. That’s 6.6 cents per round! That deal is gone, but there are other bargains to be found. Use WikiArms.com to find .22LR rimfire ammo bargains.
Share the post "Smalbore Fun Shooting — Tips for Training and Free Fun Targets"
The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
