|
|
April 30th, 2011
Forum member Jon B. (aka LazyEiger) has created a one-of-a-kind F-TR rifle that showcases innovative, “outside-the-box” thinking. Starting with an affordable Savage Target Action, Jon added top-flight components: Master Class HP prone stock with adjustable cheekpiece, and a custom Lilja 1:13″-twist barrel chambered in .308 Win. The centerpiece of the project, however, is the barrel block Jon fabricated himself to hold the barreled action. The barrel block is secured with a long plate that runs down the centerline of the stock on the bottom side. John is still in the initial testing phase of his project, but the rifle’s performance is very promising.
Jon tells us: “I am new to the sport of rifle shooting. But my son has been shooting and reloading for a year or so and he persuaded me to ‘give it a go’. I have always been a firm believer that the best way to compete in any sport is to completely understand the equipment involved. For me this means building everything I can from scratch. I am a fairly accomplished machinist and decided to make everything I could myself for the rifle. I had read many comments about Savage action screws and how important it is to get the correct tension on them for best accuracy, this made me think if the action was floating, then action screw tension would not be a factor. I did a lot of research on rail guns and came up with the design for my .308 Winchester barrel block rifle. The barrel block has a 1/8″ phenolic (plastic) sleeve to help dampen vibration and also to minimize heat transfer from the barrel to the block.”
Savage Action, Lilja Barrel, Master Class Stock, Sightron Scope
Jon carefully chose premium components to combine with his Savage Target Action. The 13-twist Lilja Medium Palma contour barrel has a 32″ finished length. Jon chambered the barrel in .308 Win with a PTG reamer with 0.336″ neck and 0.060″ freebore to shoot 155.5gr Berger fullbore bullets. The stock started off as a Master Class Highpower prone blank before it was modified to take the barrel block. On top is a Sightron SIII 10-50x60mm scope with Evolution Gun Works (EGW) rail and rings.
Share the post "Forum Member Builds Barrel-Block F-TR Rig on Savage Action"
February 19th, 2011
It may be winter, but that didn’t prevent Forum member James F. (and his girlfriend Siiri) from firing up their snowmobiles and heading out for a fun day of shooting. Now that’s dedication! James, who hails from Thunder Bay, Ontario, Canada, offers this report….
A Sunny Day for Shooting in Thunder Bay
It was almost +10° C today and sunny so my girlfriend and I went shooting. Just thought I would share some photos. I’m in the process of breaking in my Savage model 12 LRPV in .204 Ruger. About a 15-minute snowmobile ride from our houses, we have our own private 900-yard range, with zero elevation change (it’s a lake in summer time). And I got to play with my new toy. My girlfriend Siiri bought me a Kestrel 3500 weather station.
Below is my Savage 17HMR, which has a Vortex Viper 3-9X40mm. Siiri also shoots a Savage 17HMR.
And this is my new Savage model 12 chambered in .204 Ruger. This has a Vortex Viper 6.5-20X50 on Burris extreme tactical rings, with a Ken Farrell 20 MOA base. The rings I bought ended up being way too high. I didn’t realize how tall a Farrell base was. I ordered rings that are 1/2″ lower. So for now I used rubber bands and a towel to make the stock taller. Very high-tech, as you can see:
Savage Shines with Factory .204 Ammo
Today ended up being a very good day. I decided to try shooting at 200 yards to see how my .204 would group. I ended up shocking myself — I shot a 0.231″, 3-shot group. (0.435-0.204=0.231″). That is with Hornady 32gr factory ammo. Can’t complain with those results! I think we are going shooting again soon. But the weather is supposed to be -10° C so it’s not going to be as nice. But I made a gong and I need to try it out. I’m also going to test some loads in the model 12.
Share the post "Mid-Winter Shooting Report from Thunder Bay"
February 13th, 2011
Bench-Source, founded by David Dorris, President of Vertex Mfg. Corp., and benchrest shooter Darrell Jones, is now producing precision scope-mounting bases for the Savage round-top Target Action. CNC-machined to exact tolerances from 7075-T6 aircraft aluminum, these bases are extremely light (under two ounces) yet strong. Both Picatinny-style bases and Davidson dovetail bases are offered with either zero taper (flat) or with +20 MOA of built-in elevation. Bench-Source rails also feature precision-cut reliefs to match the loading ports on the Savage Target Actions.
The Picatinny (Weaver) base costs $84.95 (either flat or +20 MOA) while the Davidson dovetail base is just $69.95 (either flat or +20 MOA). This is a good price considering the quality of the materials and machining. (The 7075-T6 aircraft grade aluminum is three times as expensive as the aluminum alloy used by some other rail-makers.) Either style base is available with either a “luster” or polished finish. The price includes a Torx wrench and mounting screws.
 
 Technical Specifications
The Picatinny M1913-A Mounting Rail features 14 symmetrically spaced cross-slots. The base is long enough to mount any popular scope. The Picatinny base is approximately .610″ tall. Parallelism deviates less than .002″ between the dovetail clamping area and top of the receiver after mounting. The screws used are #6-48 x 3/8″ long and holes are drilled and counter-bored to the correct depths. This ensures that users will not damage their barrel threads or encounter interference with the locking lugs when closing the bolt.
The Davidson 1/2″ x 60º Mounting Rail dovetail is parallel over its entire length. The rail is held to very tight tolerances to minimize windage correction (at different ring positions). The Davidson rail should self-center on your action when installed per the included instructions. Both ends of the mount are chamfered slightly on a 30° angle to let the sharp corners of the mating rings align themselves without binding. The 60º dovetails are machined +/- .001″ and measured over two optimum-diameter pins to minimize over-clamping of your rings.
For more information, visit Bench-Source.com or phone: (662) 895-0803.
Share the post "Precision Scope Rails for Savage Actions from Bench-Source"
January 17th, 2011
For quite some time Whidden Gunworks has offered an excellent V-Block designed for Remington 700, Rem Model 7, or XP100/ XR100 actions. Whidden’s machined aluminum V-Block allows you to use multiple barreled actions in the same stock (provided action length and screw positions are the same).
 Now Savage owners can benefit from a V-Block set-up. Whidden Gunworks has started selling a new V-Block especially designed for Savage actions. Models are offered for the Savage Target action, Palma action, and Savage Short and Long Actions. You can’t really tell from the photo (at left), but the V-Block does have a milled recess for the Savage recoil lug.
Whidden’s V-Blocks have slightly raised ridges the run parallel to the barrel. These help provide a solid grip on the action, so you normally do NOT need to skim-bed the V-Block. Because V-Blocks have a flat bottom and straight sides, it is easy to inlet a stock to take a V-Block — nothing’s tricky. Whidden’s Savage V-Blocks are made of 6061-T6 aluminum, surface milled for epoxy adhesion, and individually inspected. John Whidden believes that a properly installed V-Block “is easier to install, simpler to inlet, more accurate, and more versatile than any action-mounting system available.” We don’t know about the accuracy part, but a V-Block can certainly help you leverage your stock investment by running multiple barreled actions in the same stock.
Right now, Whidden’s Savage V-Blocks are in short supply so you should order directly through Whidden Gunworks, by calling (229) 686-1911. You can order Whidden’s Rem-type V-Blocks for $113.95 through Creedmoor Sports or $109.95 through Brownells.com.
Share the post "New Whidden Gunworks V-Blocks for Savage Actions"
July 6th, 2010
 Are you the next John Moses Browning? Do you have the “next great idea” for gun design? Here’s your chance to find out. Savage Arms is seeking a new Product Design Engineer to help design and build new firearms. The person hired will have a leading role in the design, development, and implementation of new products from concept through commercialization. Ideal candidates will have firearms design experience and considerable knowledge of metallurgy and plastic part design. Avid firearm users and enthusiasts with mechanical machine design aptitude will be strongly considered also.
The Product Design Engineer will work at the Savage facility in Westfield, MA. The “negotiable” salary will be commensurate with skills and experience. If you are interested in applying for the position, email Paul Lessard, Savage HR Director: plessard [at] savagearms.com.
Technical Job Qualifications
Savage is looking for experienced applicants with specialized skills: “Successful candidates will have proficiency in mechanical component and assembly design, 3D CAD, and the ability to perform tolerance studies to validate design integrity. Strong mechanical assembly design aptitude, problem-solving, and project management skills are an absolute MUST. Candidates should have a BS in Mechanical Engineering or related field and a minimum of two (2) years mechanical design experience in 3D CAD, AutoCAD Inventor, preferred.”
Share the post "Want to Design the Next Savage Rifle? Savage Is Hiring…"
July 2nd, 2010
 On June 19, the 4R Rifle Club in Alex, Oklahoma hosted its Spring Balloon Shoot. This challenging “fun shoot” drew nearly 50 competitors from five states. In this multi-yardage event, shooters try to break four balloons, one each at 100, 250, 400, and 500 yards. A total of 18 rounds were allowed. The balloons were worth 10, 20, 30, and 45 points respectively. Shooters attacked the balloons in 12 relays. Even with challenging winds, some impressive scores were fired. When the smoke cleared and all the competitors had tried their luck, only two had perfect scores of 420. Jim Fowler turned in a pair of 410s to win the Two-Gun award, youth winner Dalton Ernst shot a 390, and factory gun champ Don Johnson managed a 365 with his Savage 6BR.
Exciting Shoot-off Decides Match Winner
The top six shooters of the day returned to the bench with clean scorecards for the Shoot-off. They would repeat the same course as earlier in the day — one balloon each at 100, 250, 400, and 500 yards, with 18 rounds. Two competitors, Don Johnson and Rick Jensen, emerged from the Shoot-off tied, having both shot clean scores of 420. The balloons were set up again, only this time, Don and Rick were allowed just 8 rounds. Hard choices had to be made. Both men elected to start at 400 yards, breaking all four balloons before moving to 500, where both Don and Rick broke three. As a final tie-breaker, each man fired a single shot at a distance of 300 yards. When the targets were retrieved, Don Johnson prevailed as the Overall Champion, with Rick Jensen in second. Don was shooting a .243 Win, while Rick had a .284 Win; both guns featured Surgeon actions. Finishing 3rd, 4th, and 5th respectively were: Shane Herman, Jim Fowler (2-Gun Champ), and Arthur McMeans.
Top Ten Shooters’ Equipment List (in alphabetical order)
Match organizers offer special thanks to the many match sponsors who filled a rich prize table, and thanks to the Reeves family for hosting yet another great match at the 4R Rifle Club.
Share the post "Fierce Competition at Oklahoma Spring Balloon Shoot"
May 8th, 2010
Thanks to Savage’s signature barrel nut system, it’s easy for Savage rifle owners to swap barrels without gunsmith assistance. With a pre-fit barrel from Pac-Nor or Shilen you can easily re-barrel your rifle and set the headspace with go/no-go gauges. In addition to a barrel vise, you’ll need a specialized barrel nut wrench to swap Savage barrels. Now through 5/31/2010, MidwayUSA has the Wheeler Engineering Savage Barrel Nut Wrench on sale for just $22.99, marked down from $38.49 (a $15.50 savings — roughly 40%). For comparison, Brownell’s charges $47.90 for the Sharp Shooter Supply Savage barrel nut wrench.
The double-ended Wheeler Savage Barrel Nut Wrench (item #288765) allows easy removal of the barrel nut on Savage model 10, model 110, and model 12 series rifles. Made from 3/16″ steel, the Wheeler tool features two 1/2″ square drive holes for a swing bar or torque wrench.
Share the post "40% Off Savings on Savage Barrel Nut Wrench"
April 12th, 2010
Last month we profiled the new, affordable Savage Edge hunting rifle. Though starting MSRP is just $329.00, this new Savage has many nice features, including a detachable box magazine, free-floated barrel, and handy thumb safety on the tang. The bolt copies the Savage 10/110 floating-head design and the Edge uses the familiar Savage barrel nut to secure the barrel and set headspace.
Jeff Quinn of Gunblast.com got his hands on the new Savage Edge. He was impressed with the gun, which he called “an excellent rifle at an amazing price.” Despite its low cost, Quinn’s test gun delivered sub-MOA accuracy with a variety of .243 Winchester factory loads: “Several [three-shot] groups were fired that measured under one-half inch, but the five-eighths inch group shown was typical for the day. No groups measured in excess of the magical one-inch mark.”
CLICK HERE to read complete Gunblast.com Review (many photos).
Overall, writer Jeff Quinn praised the Edge as a good, solid hunting rifle that offers great value: “There were no surprises in the handing of the Edge; it balances and handles very well. There were no surprises in the accuracy of the Edge; it shoots where you point it. There were no surprises in the reliability of the Edge; it fed, fired, and ejected perfectly. The surprise is in the price. As of this writing, the Edge has an MSRP of only $329 US. For only fifty bucks more, you can get the Edge with a 3 to 9 power scope already mounted and bore-sighted.”
Share the post "Field Test Review of New Savage Edge on Gunblast.com"
March 31st, 2010
Savage Arms has released a new line of Savage EDGE centerfire rifles. This new platform was built from the ground up as an affordable entry-level rifle. The EDGE features a new modern look, and while it shares key features with its older brother the Model 110, it has a different receiver design.
Though the basic model has a low, $329.00 MSRP, the EDGE includes some nice features: detachable box magazine, pillar bedding, and 2-position safety. For $379.00, you can get the EDGE XP, which includes a 3-9×40 scope (mounted and bore-sighted). Factory camo versions are also offered in both basic and XP configurations.
The EDGE action is apparently long enough to handle both short and long cartridges. This “one size fits all” approach has been used on some recent European rifles as well. We were pleased to see that Savage is offering a wide variety of chamberings: 223 Rem, 22-250, 243 Win, 25-06, 270 Win, 7mm-08, 308 Win, 30-06 Springfield.
An Affordable Gun for a Tough Economy
The EDGE was conceived in January of 2009. At the time, Savage observed heavy activity at the entry level pricepoint from consumers as well as manufacturers. The poor economy created more interest in pricepoint hunting guns and key manufacturers were cutting already low prices even lower.
“We wanted to not only maintain our market share, but to grow it,” Savage VP of Sales & Marketing Brian Herrick said. “We felt the only way to accomplish this was to develop a new rifle designed for this segment, rather than discount current models. We wanted a rifle that not only had a lower price, but one that had better features and was more aesthetically appealing than what was out there at the time.”
Share the post "New Savage Edge “Entry-Level Rifle” — $329 Deer-Slayer"
January 28th, 2010
Savage Arms caused quite a stir at Media Day when it unveiled its new 110 BA big-bore tactical rifle. The 110 BA is initially available in two chamberings: 300 Win Mag, and .338 Lapua Magnum. The .338 version of this rifle is Savage’s first-ever .338 Lapua Magnum, and it is VERY affordable compared to .338 LM tactical rifles from other manufacturers. We predict this gun will be a big hit with shooters who want the long-range capability of the .338 Lapua Magnum cartridge but who don’t want to sell the farm to acquire a capable rifle. Once the initial demand settles down, you should be able to find a 110 BA for around $2000 (not including optics).
NOTE: Jason removed his eye protection for this photo. We recommend that shooters ALWAYS wear ANSI-certified eye protection.
The 110 BA gun comes complete with a detachable box magazine (DBM), target grip with base, a +20 MOA scope rail, and Picatinny accessory rails ahead of the action and on the side of the chassis. The stock has a comfortable cheekpiece that adjusts for height using a handy rotary knob. A similar knob controls the buttpad position, allowing you to “dial in” length of pull. As you’d expect, the 110 BA features a Savage Accutrigger.
CLICK HERE for large photo of Savage 110 BA (shows buttstock details)
On the gun we tested, the AccuTrigger broke clean and crisp under 2.5 pounds, with little overtravel. Fitted with an oversize bolt handle from the factory, the action was smooth in operation and effortlessly fed and extracted the big .338 LM cartridges. The gun demonstrated good accuracy with Hornady .338 Lapua Mag factory ammo, allowing Jason to make a first-round hit at about 800 yards. Jason liked the gun, telling us it “feels solid and well-balanced”. Jason did note that the large muzzle brake creates quite a side-blast. When this Editor was taking video, Jason warned me to get out of the way of the blast. I moved back behind the shooter, but even there, the brake’s blast could be felt.
Quality Big-Bore Tactical for under Two Grand
The 110 BA establishes a new, affordable price point for a true big-bore tactical rifle. Both the 300 Win Mag and the 338 Lapua Mag versions have an MSRP of just $2267.00. We expect to see the “street price” on these rifles peg below $2000.00. That makes the .338 LM version of the 110 BA one of the most affordable .338 Lapua magnum tactical rifles yet offered to the public.
Share the post "SHOT Show Report: NEW Savage 110 BA Tactical Rifle in .338 Lapua Magnum"
January 19th, 2010
Savage Arms was well represented today at the SHOT Show’s “Media Day as the Range.” We saw and shot several new offerings from Savage (including a tactical rifle in 338 Lapua Magnum and a hunting weight 6.5-284). We’ll cover these centerfire Savages later this week. One of the new Savages we really liked was the model 93R17 TR, a slick little 17 HMR. It looks and feels like a full-sized centerfire tactical bolt-gun, it comes with an excellent stock and nice trigger, and it is both affordable and very accurate. (NOTE:v Savage is also offering 22LRs rimfires in the same stock, the MK II TR and TRR.)
 This rifle features an all-new, texture-painted wood stock with a very sound “tactical” design. It is well thought out, with good ergonomics, and offers options and design details that most rimfires do not. The stock features a moderate beavertail fore-end, a fairly vertical grip and a shallow butt-hook at the rear for support using the non-shooting hand. The black textured paint is very similar to the black painted finish on McMillan stocks (notice the texture in the photo).
The “look and feel” of the model 93 TR is similar to the popular Rem 700 PSS, and that’s good news for tactical shooters. With the new m93 TR, you feel like you are shooting a full-size tactical rifle. It feels solid and comfortable. And this rifle features with an optional factory-installed picatinny rail — a very nice feature on a rimfire rifle. You can easily move your scope back and forth between the model 93 and a Picatinny equipped centerfire bolt-gun. The model 93 should prove very popular with shooters who want to train with an economical rimfire that has very similar ergonomics to a centerfire bolt gun. For training duties only you may prefer the 22LR version. But the 17 HMR would be our pick for a “working” varmint rifle.
With CCI hollowpoint 17 HMR ammo, the m93 proved very accurate — we hit everything we shot at with ease, even in rainy, gusty conditions. Targets were mostly clay pigeons at 50-100 yards; we could break a clay, then easily hit the smaller pieces. Clearly this gun can be a very effective short-range varminter.
Overall, we really liked the feel and ergonomics of this rifle. It is a good choice for those seeking a rimfire trainer that handles like an “adult-sized” centerfire rifle. We are confident this will make a great varmint rifle as well as a economical tactical trainer. Your Editor expects that this rifle will be a hot seller for Savage.
Savage m93 17 TR Specs: Cal 17HMR; barrel 21″; overall-length 40″; weight about 7.5 lbs.
Share the post "NEW Savage m93 17 HMR Varmint/Tactical Rimfire"
January 18th, 2010
Eat your hearts out readers. Today while you’re working hard at “real jobs”, Jason Baney and I will be in Boulder City, Nevada testing the latest and greatest new firearms from Savage, Browning, Sig Sauer and other makers. Jason and I will be exercising our trigger fingers as part of the SHOT Show Media Day at the Range. At this annual event, over 50 leading manufacturers will showcase their new products for 2010.
We’ll have a chance to put a variety of rifles and pistols through their paces. Sig Sauer has promised some exciting new rifles, and Beretta, Glock, Ruger, and Taurus should all have some new pistols.
We will provide a complete report, with many photos and video, on Tuesday. But if you can’t wait, check out our Twitter Page Monday afternoon and evening for Media day updates. We hope to provide “instant updates” on Twitter.com, offering quick highlights of the new firearms on display.
CLICK HERE for Media Day Instant Field Reports on Twitter.com
Share the post "Get Media Day Updates on Twitter.com"
|
