Sometimes simpler is better when it comes to targets for fun shooting and load testing. While we normally use test targets from our Downloadable Target Page, it’s sometimes easier to just use brightly-colored “Hi-Viz” adhesive target dots.
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
You can order 1″ target dots in bulk from Labeloutfitters.com. Many colors are available including fluorescent (hi-viz) Red, Green, Orange, and Yellow. These are bright and easy to see even in fading afternoon light. A pack of twenty (20) sheets (1260 dots total) costs just $5.97 (that works out to $4.74 per thousand). For the 1″-diameter stick-on dots you get 63 dots per sheet. Larger, 1.5″-diameter fluorescent dots are also available in 20-sheet packs for $5.97, with 24 large dots per sheet (480 dots total). If you want even bigger, 2″-diameter dots, sheets with 20 Hi-Viz dots per sheet are on sale for $5.97 per 20-pack (400 dots total).
Our friend Danny Reever really likes the bright dots from Label-Outfitters: “Ordered some of the 1″ dots from LabelOutfitters.com and recieved them in two days Priority Mail! Bought the flourescent red,green, and yellow and they are really nice — especially for the price.”
If you prefer smaller, 3/4″-diameter circles, Amazon.com sells Avery packs with 1008 adhesive dots for just $2.99 or $3.99 per pack. Colors include Neon Red/Orange (item 5467), Neon Yellow (item 5470), Neon Green (item 5468), and Bright Blue (item 5461). We recommend the Neon Red/Orange for most uses, or the Neon Yellow dots for use on a black background. There is even a dispenser-box option with 1000 3/4″ dots on a roll in a box. Amazon.com also offers 1″, 1.25″, and 2″-diameter target pasters in 1000-dot rolls for $13.99 per roll.
Half-Inch Fluorescent Dots for 100-200 Yards
For close-range work, you may prefer 1/2″-diameter dots. Forum member Steve found a source for very small 1/2″ dots: Uline.com. The 1/2″ dots are available in a wide variety of colors including fluorescent Red, Pink, Yellow, and Green. Price is $12 for a roll of 1000 dots (item S-2063). Steve notes: “A 1/2″ circle at 300 yards is not quite entirely covered by Nightforce crosshairs at 42-power (I’d say 70% coverage). I.e., it seems easier to line up repeatedly than with the bigger (3/4″) circles, which I used to use. Note that, for me, neon green and neon orange work best on brown cardboard targets. Neon orange works well on white paper.”
Share the post "Target Dots — Buy ‘Em by the Thousand and Save"
It’s March 4th today, and that means St. Patrick’s Day is coming up in a couple weeks. To help celebrate that traditional day of Irish pride, parades, and green beer, the NRA has created two (2) fun targets you can download, print, and shoot.
The first target features a large four-leaf clover in the middle, with 17 other smaller three-leaf shamrocks around the outside. With five black bulls-eyes in the center graphic, that gives you a total of 22 aiming points for shooting fun. For added challenge we suggest you set this target at 100 yards for rimfire rifle and 200 years for a centerfire gun.
The second target offers the legendary Pot of Gold at the end of the rainbow. Along with a big bullseye on the pot, there are 15 shamrocks in gold circles, plus five small gold bars with tiny bullseyes. Those smallest bulls will be a challenge even at 100 yards. You’ll need a half-MOA (or better) rifle to “clean” this target, hitting the smallest red dots.
Whether you’re Irish or not, these targets will hopefully bring you a bit of luck. Click each image above to open a high-rez PDF file that you can print out. Then, this St. Patty’s day, wear your green, grab your gear, and head to range for some fun shooting.
Share the post "Free, Downloadable Lucky Targets for St. Patrick’s Day"
The NRA Blog has published a nice set of super-sized playing card targets. These boast a variety of aiming points (large and small) so they work well for rifles as well as pistols. On the Queen of Diamonds, aim for the large bull-style designs in the “red zone” or aim for the smaller dots on the periphery. For a real challenge, try to shoot each one of the 26 small red diamonds in the curved, central white stripes.
On the Five of Clubs target, you can aim for the smaller club symbols, or shoot for the orange, purple, and green “dripping paint” bulls in the large, central club. The Ace of Spades target offers a colored bullseye in the center, plus a very small bullseye in the letter “C”. Last but not least, the Eight of Hearts is a perfect choice for a trip to the range on February 14th, Valentine’s Day.
Click Any Image to Download Printable PDF Target:
Share the post "FREE Printable Super-Sized Playing Card Targets"
Hail the Rail. If you are looking to put multiple shots through one hole, the Unlimited Class benchrest gun, aka “Rail Gun”, is the firearm of choice. These heavy Unlimited rigs are the most accurate benchtop shooting machines ever created. Campaigned by ace competitors in the 100/200-yard benchrest game, rail guns are capable of delivering the ultimate in rifle accuracy — multiple 5-shot groups in the ones and zeros.
Watch Video to Learn More about Rail Guns and See Them in Action:
In this video, YouTuber “Taofledermaus” takes a look at high-tech rail guns on display at the Visalia (CA) shooting range. He says: “The Unlimited Class rail guns are indeed the epitome of precision shooting. [These rifles] resemble something out of a ballistics test laboratory. Each [rail gun] weighs about fifty pounds…”
One-Hole Accuracy with Rail Gun
What kind of accuracy can a top-of-the-line rail gun deliver? Check out this target shot by our friend Lou Murdica in January 2015 in Phoenix. Sometimes superlatives really aren’t necessary. Just look at that target. Yes that is FIVE shots (although it truly appears like one hole). And it is centered! This remarkable group measured at 0.039″. Lou drilled this group with one of his 6 PPC railguns. Rounds were loaded with Accurate LT-32 powder and Berger 65gr BT bullets. The target was submitted to the NBRSA as a potential new 100-yard Benchrest record in the Unlimited (Railgun) Class.
This is a file photo with Lou Murdica with a different rail gun (not the one that shot above target).
Story/video tip by Boyd Allen. We welcome reader submissions.
Share the post "Unlimited Class “Rail Guns” — The Epitome of Precision"
SHOT Show in Las Vegas is just two weeks away. Here are some of the interesting new products that will debut at SHOT Show. You can find these items and hundreds more new-for-2016 products at the SHOW Show New Product Center.
The Newcon Optik Spotter LRF is a combined spotting scope and laser rangefinder — the first of its kind. This unique piece of equipment integrates a Newcon Optik Laser Rangefinder with a 15-45X Spotting Scope with etched mil-dot reticle. Newcon Optik claims a 5500m maximum range for the LRF. The integrated scope/LRF is housed in a rugged yet light-weight MIL-SPEC housing. We like the idea of a combined Spotter/LRF. Will other companies try to copy Newcon Optik’s innovative design?
Mason Target Systems — AR500 Steel Target With Shot Sensor
The MTS Target System “Pescadero” unit combines a rugged AR500 steel target with a durable electronics and sensor package that allows shooters to view their shots on a mobile App. With on-board power and wireless communication technology, the system will display shot location to the shooter positioned hundreds of yards away. So you can hear the “ding” of steel and then see your exact shot location on your smart phone or tablet. To aid aiming, the Pescadero target can mount self-healing polymer targets to the AR500 steel plate. Visit MasonTargetSystems.com for more information.
Schweitzer Optics — First-Ever Double FOV Scope
Here is a very innovative new hunting scope that actually displays a 3.5 X view AND and 1.0 X view simultaneously. Schweitzer claims this is the first and only double Field of View (FOV) sports optic in the world. This innovative optical technology doesn’t come cheap — Schweitzer’s Eagle Eye 3.5 dual POV scope retails for $2500.00.
Annealing Made Perfect — Induction Annealing Machine
No more flaming torches (and burned fingers). The AMP Annealing system anneals through electrical induction. This micro-processor controlled, precision-calibrated induction annealer provides exact and repeatable neck hardness. With the various AMP-made pilot inserts, the machine will handle popular cartridge types from .17 Caliber all the way up to 460 Weatherby. Anneal times are pre-programmed for optimal results.
Accu-Tac — SR-5 Tactical Bipod
The Accu-Tac SR-5 Bipod is crafted from high-quality billet aluminum. The SR-5 mounts quickly and securely to a 1913 Picatinny rail. The bipod’s wide stance provides good stability. Ratcheted leg extensions adjust to five different heights, and then retract quickly with a one-button retraction lever. Legs can be deployed in a conventional 90-degree orientation, or at a 45-degree angle either forwards or rearwards.
Lyman Products — Cyclone Rotary (Wet) Tumbler
Lyman is introducing a new Rotary Tumbler for 2016. Designed for use with stainless (pin-type media) and liquid, this Cyclone Tumbler gets brass thoroughly clean inside and out. The large capacity drum holds up to 1000 pieces of .223 Rem brass and features a rubber lining to protect brass and greatly reduce operating noise. The included two-piece sifter pans make separating cases and pins easy.
Swiss+Tech Products — Tac20 Firearms Multi-Tool
This new multi-function gun tool contains 4 driver bits, 2 Torx drivers, 2 Allen drivers, gun pin punch, sight wrench, castle nut wrench, flat screwdriver, bottle opener, knife, and LED flashlight. It even contains a fitting with a male thread connection for attaching cleaning rods. That’s clever. All totaled, the Tac20 multi-tool offers 20 features — that’s a lot of functionality in a small, compact package from Swiss+Tech Products.
Share the post "New Products Will Debut at SHOT Show 2016"
Want something more interesting than black-on-white bullseye targets? Champion Targets recently released a new series of game-theme targets. You can blast aerial drones, hunt dinosaurs, play a game of “H-O-R-S-E”, or shoot ducks in a Carnival Shooting Gallery. These new targets, which cost $7.49 per 12-pack, make great Christmas Gifts for the younger shooters in your family. What kid wouldn’t like a Dinosaur Target? And “kids of all ages” can enjoy the Shooting Gallery and Junkyard Plinker targets. The Know Your Limits target is good for tactical practice. These targets are available now from major retailers such as Amazon.com and OpticsPlanet.com.
Have you recently purchased a new scope? Then you should verify the actual click value of the turrets before you use the optic in competition (or on a long-range hunt). While a scope may have listed click values of 1/4-MOA, 1/8-MOA or 0.1 Mils, the reality may be slightly different. Many scopes have actual click values that are slightly higher or lower than the value claimed by the manufacturer. The small variance adds up when you click through a wide range of elevation.
In this video, Bryan Litz of Applied Ballistics shows how to verify your true click values using a “Tall Target Test”. The idea is to start at the bottom end of a vertical line, and then click up 30 MOA or so. Multiply the number of clicked MOA by 1.047 to get the claimed value in inches. For example, at 100 yards, 30 MOA is exactly 31.41 inches. Then measure the difference in your actual point of impact. If, for example, your point of impact is 33 inches, then you are getting more than the stated MOA with each click (assuming the target is positioned at exactly 100 yards).
How to Perform the Tall Target Test
The objective of the tall target test is to insure that your scope is giving you the proper amount of adjustment. For example, when you dial 30 MOA, are you really getting 30 MOA, or are you getting 28.5 or 31.2 MOA? The only way to be sure is to verify, don’t take it for granted! Knowing your scopes true click values insures that you can accurately apply a ballistic solution. In fact, many perceived inaccuracies of long range ballistics solutions are actually caused by the scopes not applying the intended adjustment. In order to verify your scope’s true movement and calculate a correction factor, follow the steps in the Tall Target Worksheet. This worksheet takes you thru the ‘calibration process’ including measuring true range to target and actual POI shift for a given scope adjustment. The goal is to calculate a correction factor that you can apply to a ballistic solution which accounts for the tracking error of your scope. For example, if you find your scope moves 7% more than it should, then you have to apply 7% less than the ballistic solution calls for to hit your target.
NOTE: When doing this test, don’t go for the maximum possible elevation. You don’t want to max out the elevation knob, running it to the top stop. Bryan Litz explains: “It’s good to avoid the extremes of adjustment when doing the tall target test.I don’t know how much different the clicks would be at the edges, but they’re not the same.”
Should You Perform a WIDE Target Test Too?
What about testing your windage clicks the same way, with a WIDE target test? Bryan Litz says that’s not really necessary: “The wide target test isn’t as important for a couple reasons. First, you typically don’t dial nearly as much wind as you do elevation. Second, your dialed windage is a guess to begin with; a moving average that’s different for every shot. Whereas you stand to gain a lot by nailing vertical down to the click, the same is not true of windage. If there’s a 5% error in your scope’s windage tracking, you’d never know it.”
Verifying Scope Level With Tall Target Test
Bryan says: “While setting up your Tall Target Test, you should also verify that your scope level is mounted and aligned properly. This is critical to insuring that you’ll have a long range horizontal zero when you dial on a bunch of elevation for long range shots. This is a requirement for all kinds of long range shooting. Without a properly-mounted scope level (verified on a Tall Target), you really can’t guarantee your horizontal zero at long range.”
NOTE: For ‘known-distance’ competition, this is the only mandatory part of the tall target test, since slight variations in elevation click-values are not that important once you’re centered “on target” at a known distance.
Share the post "Calibrate Your Clicks with Tall Target Test"
Note: The orange-color metal support frame is sold separately.
Reactive targets are fun. This versatily target offers both conventional black on white bullseyes as well as slots for reactive clay targets. Matterhorn Innovations produces the unique ReVersa Target, a heavy paperboard target with large bullseyes on the front, plus pre-cut tabs for clay pigeons on the reverse side. You can start with the black & white side for precision work, and then flip the target over and blast away at a dozen clay birds held in individual tabbed pockets. ReVersa targets cost just $4.99 each at Brownells.com. That price does NOT include the wire target-holders shown in the photos — those sell separately for $19.99.
We expect most ReVersa target buyers will use these 2′ x 3′ cardboard sheets inside 200 yards. However we think the ReVersa targets would also be useful for long-range shooters who want to try reactive targets for a change. We often shoot at clay pigeons at long range, but we either have to set them on the berm, or tape them one by one to a cardboard backer. With the ReVersa target, you can easily position a dozen clays up off the ground where they are more visible. Buyers have been happy with these jumbo-sized, double-sided targets — user feedback on Brownells.com has been all positive. Here are reviews from actual purchasers:
“Five Star. Great quality target. Many areas to shoot on the same target. I can see why this is top rated product. I plan to buy many more in the future.”
“Five Star. These are the best targets I have used. They even stood up good in the wind when my other targets would get blown over. Highly recommend…”
Share the post "Shoot Bullseyes and Clays with the Same Target Unit"
AccurateShooter.com has a HUGE collection of FREE downloadable PDF targets. We offer a very wide range of target designs: Load Development Grids, NRA Bullseye targets, Official-Size BR targets, Realistic Varmint Targets, Silhouette Shapes, Fun Plinking Targets, and even specialized tactical training targets. If our collection of free targets isn’t enough, or if you want to create a new kind of target — you’re in luck. There’s an Australian-based interactive website, PrintTargets.net that allows you to create your own customized, printable PDF targets.
CLICK Graphic to Create Your Own Targets.
Just follow the step-by-step instructions to set paper size, layout, bullseye color, line thickness, number of rings and diameter. You can even add Score Numbers to your target rings. PrintTargets.net is easy and fun to use. It’s much faster to create targets this way than to try to draw a series of circles with PowerPoint or MS Paint. Power-User tip: PrintTargets.net even offers a handy diamond-grid calibration diagram that you can add to your custom target designs. You’ll find the calibration grid as option #15 when you design your target — just scroll all the way down the PrintTargets.net home page.
Reactive targets are fun — a nice change of pace compared to punching paper. We know many guys like busting clay birds with rifles at 300 yards and beyond. This is good training for a varmint safari, as a clay pigeon is roughly the same size as a well-fed prairie dog. However, clays make better rifle targets if you can get them up off the ground. When placed on a berm they don’t shatter as dramatically. Birchwood Casey has a new product that makes “clay-busting” more fun.
The new Rigid™ Clay Holder Stand from Birchwood Casey features an A-frame design that sets up quickly and easily. The stand is constructed of heavy cardboard and should withstand multiple trips to the range. The die-cut holes will hold eight standard size clay targets on one side and four on the other. The Rigid Clay Holder Stand folds flat for easy storage and transport and comes packaged with three sheets of Shoot-N-C® 1″, 2″ and 3″ targets. Birchwood Casey’s clay target holder sells for a suggested retail price of $7.60. (At that prices you can afford to buy a few spares.)
Here’s a clever new product from Birchwood Casey, makers of Shoot-N-C targets. The innovative, spring-loaded “Belly Dancer” target moves when hit. This does the duty of a gong at a fraction of the weight and cost. The Belly Dancer is handy, easy to transport, and affordable ($34.07 at Amazon.com). What’s the down-side? Well, eventually you’re going to hit those springs and they will need replacement. Also, while the polymer target zone can withstand hundreds of shots, it will not last forever.
Ground Strike “Belly Dancer” Target
The new Belly Dancer Target employs springs to move back and forth when hit. The 9.5″ x 6.5″ yellow target section is made from a self-healing polymer that can withstand hundreds of hits. Designed for use with any caliber from .22 up, this Belly Dancer target doesn’t “clang” like a gong but the waiving motion indicates a hit. Shoot the neon-yellow gong-shaped head by itself or add stick-on 6″ Bullseye targets for precision work. This Belly Dancer target system works well as long as the ground is relatively soft. In rocky areas you may have trouble inserting the support shafts. But we still like this new product. It’s great for rifle practice at 300-600 yards.
Belly Dancer Target Features
– Yellow Hit Zone measures 9.5″ high and 6.5″ wide.
- Metal stand is 14″ high.
- Rated for all calibers and firearms.
- Long-last technology handles hundreds of rounds.
- Includes twelve 6″-Diameter Shoot•N•C Targets.
Share the post "Spring-Loaded Belly Dancer Target Moves When Hit"
What lives in the Alabama backwoods and has 54 sets of ears? The answer is the new, $20 million-dollar CMP Marksmanship Park in Talladega. This new facility, set to open in May, boasts electronic Kongsberg Target Systems (KTS) at 200, 300, and 600 yards. All totaled, there are 54 Kongsberg target units, each with its own acoustic sensors — the “ears” as it were. Each KTS target has a set of acoustic sensors (very precise microphones) that plot the shot location using sound triangulation. Shot locations are accurate within a fraction of a millimeter. What’s more, because electronic targets do not expand or shrink with humidity levels, as paper does, scoring should be more consistent match to match.
Monitors Display Score and Shot Location Instantly Each target connects to a monitor that displays the hit locations to the shooter. Easy push-button controls allow the shooter to cycle through hits and options without having to change positions. The monitors employ non-glare glass protected by an aluminum frame that acts as a shade. This ensures good visibility for the shooter.
Engineered in Norway, Kongsberg target systems do more than just display shot locations to competitors. The system automatically calculate scores, and every target is networked to a central, “command” computer. This can provide updated competitor rankings, and can even display the results to event spectators on large view screens. See how it works in this animated demo video from Kongsberg:
Video Demonstrates Kongsberg Target System
Share the post "Sonic Sensors in Talladega’s Target Systems Plot Shots"
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
Verifying Scope Level With Tall Target Test
Each target connects to a monitor that displays the hit locations to the shooter. Easy push-button controls allow the shooter to cycle through hits and options without having to change positions. The monitors employ non-glare glass protected by an aluminum frame that acts as a shade. This ensures good visibility for the shooter.
