Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









October 6th, 2018

Case Prep Tips from Western Powders

Western Powders Case Preparation prep inspection flash holes primer pockets reloading

Western Powders (which sells Accurate, Ramshot, and Norma powders) has published an article on case inspection and preparation. There are many tips in this article that can be useful to precision hand-loaders. For example, every time you open a new box of cartridge brass (particularly from domestic makers), you should inspect each case for flaws.

TIP ONE: Visual Inspection — Finding Flaws
Cases are mass-produced items and malformed ones are relatively common. Inspect each case carefully looking for obvious defects. A bench-mounted magnifying glass with light is a real help for the over-40 crowd. The main defects will be cracks in the neck or case body, crushed shoulders or deep creases in the neck. Next check the primer pocket. It is also fairly common to find flash holes that are damaged or, more rarely, not concentric to the primer pocket.

Western Powders Case Preparation prep inspection flash holes primer pockets reloading

Imperfections like small dings in the case body, or necks that are not completely symmetrical do not have to be eliminated at this step. Damage of this sort is usually from loose packaging and usually has not seriously damaged the brass. [Running an expander mandrel in the neck] and fire-forming will iron out these largely cosmetic issues.

The Western Powder article also talks about primer pocket uniforming. We do NOT normally uniform the pockets for Lapua or RWS brass from the start. However, pocket uniforming can be beneficial with some other brands of brass, including Lake City, Remington, and Winchester. If you shoot milsurp brass, set time aside for pocket uniforming.

TIP TWO: Primer Pocket Uniforming
Western Powders Case Preparation inspection flash holes primer pockets reloadingLike flash holes, primer pockets are mass-produced and prone to small dimensional changes. A uniforming tool is used to make the depth of each primer pocket consistent. In turn this allows similar firing pin strike depths on the primer which creates more consistent ignition characteristics.

A good uniforming tool should have a shoulder, or another positive stop, that sets the cutter’s depth. Its use is pretty straightforward. The cutter is inserted into the pocket and turned clockwise several times until the stop in flush with the case head and no more brass is removed from the juncture of the pocket’s base and sidewall. This a job best done by hand. You will feel when the cutting is finished by a change in how smoothly the cutter turns in the pocket. Very little material is actually removed; usually just enough to square the radius at the bottom of the pocket.


READ Full Case Prep Article in Western Powders Blog »

Western Powders Blog Case Prep Neck turning

Permalink Bullets, Brass, Ammo, Reloading No Comments »
May 15th, 2018

New Ramshot Long Range Tactical (LRT) Powder

Ramshot LRT Long Range Tactical powder propellant spherical load data

Western Powders has introduced a new spherical powder designed for large magnum cartridges such as the .338 Lapua Magnum. This new powder, Ramshot LRT, has an extremely slow burn rate. Being a spherical (ball) powder it meters well. It also offers very good velocities. The manufacturer states:

“As one of the slowest spherical powders ever developed, Ramshot LRT (Long Range Tactical) was created for high performance at extreme ranges. Designed specifically for the .338 Lapua Magnum using heavy, high ballistic coefficient bullets, LRT offers high load densities and low standard deviations for superior accuracy. Hunters who prefer the advantages of overbore magnums like the .257 Weatherby or 30 Nosler will find that LTR meters more easily and produces flatter trajectories than rival propellants.”

Though Ramshot LRT has just started to ship to retailers, Western Powders has compiled some initial load data for a variety of cartridges. Shown below is official load data for four large cartridge types (this is a partial list). Additional load data for Ramshot powders is found on the Ramshot Load Data Page. As with all load data, start conservatively, and stick to the exact components listed:

Ramshot LRT Long Range Tactical powder propellant spherical load data

Permalink New Product, Reloading 1 Comment »
January 19th, 2014

Western Powders Offers Updated Reloading Guide Edition 5.0

Western Powder Accurate Ramshot Reloading GuideAccurate makes some outstanding propellants, including LT-32, a favorite among short-range benchrest shooters. Ramshot X-Terminator is also a great powder for a many applications. You’ll find up-to-date load data for these and other Accurate, Ramshot, and Blackhorn propellants in the new Western Powders Reloading Guide Edition 5.0. This printed resource guide includes the most current handgun and rifle Load Data for Accurate and Ramshot powders. The Guide offers a variety of helpful articles on subjects from Reloading Basics to Gun Cleaning.

Western Powder Accurate Ramshot Reloading Guide

Western Powder Accurate Ramshot Reloading Guide

Western’s print-format Reloading Guide is offered for $2.99 delivered. (The guide itself is free — the $2.99 covers shipping and handling.) It’s nice to have a “hard-copy” guide to keep in the loading room. However, if you want immediate access to load data for Accurate propellants and Ramshot powders, there are online reloading resources for both brands. Click the links below:

Western Powder Accurate Ramshot Reloading Guide

Accurate Powder
Online Load Data


Ramshot Powder
Online Load Data

Western Powder Accurate Ramshot Reloading Guide

Permalink Bullets, Brass, Ammo, Reloading 2 Comments »
December 15th, 2012

New Accurate LT-32 Powder Coming in January

Midsouth Shooters Supply is now taking advance orders for the new Accurate LT-32 Powder, with initial deliveries expected in January 2013. Price for a 1-lb container is $25.12, while an 8-lb jug runs $190.50. Produced by Western Powders, LT-32 is an extruded powder with extremely small kernels (roughly .0275″). This powder is designed to perform like the legendary “T-322″ powders which worked brilliantly in short-range benchrest cartridges, especially the 6mm PPC. Early testers report that Accurate LT-32 meters superbly and is easy to tune. Western claims LT-32 exhibits very low standard deviation. (Photos below by Speedy Gonzalez).

Accurate lt32 powder Western

Speedy Says Accurate LT-32 is Very Promising
Benchrest Hall-of-Famer and noted gunsmith Thomas ‘Speedy’ Gonzalez tested the prototype LT-32 powder from Western Powder earlier this year. Speedy stated: “It pains me to say it, but the new LT-32 out-shot my best lots of [the original] IMR 8208 (T-322)”.

Accurate lt32 powder Western

Speedy reports: “I must say that I was quite surprised by the results of my initial testing of the new Western Powder LT-32. Shooting this morning over my Oehler 35P triple screen chronograph yielded some very unexpected results. My best lot of ‘T’ powder continues to exhibit its age as it continues to lose velocity (as it ages). While the new Western LT-32 demonstrated this morning velocities equal to what my old ‘T’ powder used to shoot like 30 years ago.

This new powder goes through the measure like a ball powder. (Note: I have always felt that one of the reasons ‘T’ powder shot so well was due to the fact it measured so well as compared to other powders. This is a definite advantage for us that rely on consistent volume instead of weight.) I will have to shoot it over a season to see if it is as temperature and humidity insensitive as ‘T’, but it looks very promising from what I saw today.

It has yet to be seen if the new LT-32 proves to not be affected by temperature and humidity like the old T-322. But from these short tests it very much mimics my T-322 of old. My ‘T’ powder was always a blessing to me in the fact that when I went to a match I did not have the same problems everyone else was having [i.e. having] to tune up and down over the course of a weekend or week. I got to shoot and concentrate on the conditions instead of making it a tuning competition. It was always kind of funny watching everybody going up and down on their powders trying to accommodate the changes in weather as the days went on. Hopefully this will allow all to become better shooters by being able to concentrate on shooting and not re-turning every time one comes back from the bench.”

Statement from Western Powders

The Accurate LT-32 is an exact copy of the original T-32 manufactured in the same plant and on the same machinery as the original. Lou Murdica has been extensively testing it and he tells us it is the easiest powder to tune that he has seen in 40 years.

Accurate lt32 powder WesternAccording to Lou, the chamber that everybody was using in the 80s will work with this powder. The bullets do not need to be seated way out in order to get more powder in the case. In testing the powder in our Bond Universal receiver against the original “T” powder, SDs were about 30% lower with the new powder versus the “T” powder. Lou and Don Nielson donated 16 lbs. of the original T-32 lot of powder for our quality control and that is what the new powder is shot against.

All of our powders are allowed to deviate +3% to -5% in pressure from the quality control lot except LT-32 which we cut the deviation percentages in half in order to have the best lot to lot consistency in the industry for this powder[.] We developed this powder specifically for the 6mm PPC and it is QC’d in the 6mm PPC.

Keith Anderson
Western Powders Ballistic Lab

NOTE: Accurate LT-32 should also be available from PowderValleyInc.com in mid-to-late January 2013. Listed Prices are: $24.10 for 1 pound and $182.00 for 8 pounds.

Permalink New Product, Reloading 5 Comments »