Berger Unveils New 6.5mm 130gr AR Hybrid Tactical Bullet
Berger Bullets has just announced a new 6.5 mm (.264 caliber) 130gr Hybrid projectile. Optimized for magazine-length seating (and AR10-friendly), the new 130gr bullets should be ideal for tactical comps and the PRS series. We expect this new bullet to work great when loaded in modern mid-size cartridges such as the 6.5×47 Lapua and 6.5 Creedmoor. Berger’s new 6.5mm 130gr Match AR Hybrid OTM Tactical bullet (could Berger come up with a longer name?) will soon be released to the public. Berger says this new 130-grainer is the first of many new bullet designs to be introduced in the next few years. Here is a run-down on the new bullet from its designer, Bryan Litz of Applied Ballistics.
NEW 130gr Hybrid — Behind the Design
by Bryan Litz, Berger Chief Ballistician
Intelligent bullet design and selection begins with an understanding of application constraints. For bullets that will be used in unlimited rifles, there are few constraints and performance can truly be maximized. However, many shooting applications have realistic constraints such as magazine feeding of loaded rounds. In constrained applications, you need to ask the question: “What’s the best bullet that will work within the constraints of my shooting application?”
The new Berger 6.5mm 130 grain AR Hybrid OTM Tactical bullet is specifically optimized for maximum performance in magazine-length ammo.
6.5mm cartridges are the second most common cartridges used by top shooters in many of the Precision Rifle Series (PRS) matches, with 6mm being the most common. These kinds of tactical matches all have stages that require repeating rifles — either AR-10 platforms or bolt guns — so magazine feeding is a must. Recognizing that Berger did not have an option that was truly optimized for this particular application, we went to work and the latest 6.5mm Hybrid is the result.
SUMMARY
The new Berger 6.5mm 130 grain AR Hybrid OTM Tactical bullet is specifically optimized for use in loaded ammo with COAL constraints for magazine feeding. This bullet maximizes overall performance through BC as well as achievable muzzle velocity in mid-capacity 6.5mm cartridges fed from AR-length magazines.
What makes this bullet optimal for magazine length ammo? To start with, the nose of the bullet is constrained in length so that when it’s loaded to mag length in 6.5mm cartridges such as the 6.5mm Creedmoor, 260 Remington and 6.5×47 Lapua, the nose of the bullet won’t be pushed below the case mouth. This can be an issue with some of the heavier 6.5mm bullets like the 140s. Furthermore, the hybrid ogive design is not sensitive to jump distance like some other designs such as the VLD.
Another consideration of length-constrained ammo is how much of the bullet is pushed down into the case. The inside of the case is for powder, and the more space you take up with bullet, the less powder you can fit in. Less powder means less total energy available, and muzzle velocity is depressed. A bullet weight of 130 grains is an optimal balance between external ballistic performance (BC) and internal case capacity considerations which translate into muzzle velocity. Further to this objective, the AR Hybrid has a minimal air gap in the front of the nose, which allows the bullet to have an even shorter OAL. When dealing with length-constrained designs, you need to pack as much bullet into as little length as possible< to optimize overall performance. Another advantage of making the bullet shorter is that stability, including transonic stability, is improved. Although this design is length-constrained, the combination of a hybrid ogive and 7 degree Boat Tail produce a very respectable G7 form factor of 0.920 which is within 1% of the popular 6mm 105 grain Hybrid. See below for full live fire ballistic performance data.
The 6.5mm 130 grain AR Hybrid will be barely stable from a 1:9″ twist, and reaches full stability from a 1:8″ twist which is common for many 6.5mm rifles. Visit the Berger Bullets twist rate calculator to get more detailed stability information on your specific barrel twist, muzzle velocity and environment.
Cartridge Selection for Magazine Length Constraint — Advanced Analysis
The trend to smaller calibers in magazine-fed rifles is happening for a very good reason. For a .308 Winchester round, you only have 2.37 calibers of nose length available for the bullet to protrude from the case. Such a short nose will have relatively high drag for the caliber. By contrast, smaller calibers such as 6.5mm and 6mm have proportionally more length available for the nose to protrude from the case and still fit in the same COAL constraint. 
Proportionally longer noses mean lower drag. Proportionally longer bullets mean higher sectional density. Combine an elevated sectional density with lower drag, and you get higher BC bullets. For example, consider a 175 grain .30 caliber bullet commonly used in .308 Winchester M118LR-type ammo. These 175 grain bullets have G7 BCs in the neighborhood of .243 to .260. Neck the .308 down to 6.5mm (260 Remington) or 6mm (.243 Winchester) and now look at the BCs of the bullets available in these calibers which work within the same magazine length constraint. The 6.5mm 130 grain AR Hybrid has a G7 BC of 0.290, and the 6mm 105 grain Hybrid has a G7 BC of 0.278 — both of which are higher than the .30 cal 175 grain bullet BC. Furthermore, you get hundreds of feet per second more velocity with the necked-down cartridges as well.
All of the above translates into higher hit percentage. See the caliber comparison chart below* which is an excerpt taken from the book: Modern Advancements in Long Range Shooting which addresses this and many other topics in even more detail.
*The Weapon Employment Zone (WEZ) analysis shown above is for a 1000-yard shot on a standard IPSC silhouette in an uncertain environment having: +/- 2 mph wind, +/- 1 yard range, Muzzle Velocity SD of 10 fps, and a rifle shooting 1 MOA groups.
Similar Posts:
- New 250gr Berger .338-Caliber OTM ‘Tactical’ Hybrid Bullets
- Berger Adds 215gr and 230gr Hybrids to .30 Caliber Bullet Line
- ABM Ammo Releases .260 Rem Ammunition with Berger Hybrids
- New Berger 7mm 190 Grain Long Range Hybrid Target Bullet
- Berger Releases NEW 6.5mm 144gr LR Hybrid Target Bullet
Share the post "Berger Unveils New 6.5mm 130gr AR Hybrid Tactical Bullet"
Tags: 130 grain Hybrid, AR10, Berger Bullets, Bryan Litz, Magazine Fed, OTM Tactical, Secant Ogive, Tangent Ogive
As a 6.5 Grendel shooter I’m excited about this bullet, as well. We anticipate more 6.5mms that are as thoughtfully designed, particularly in lighter weights.
We’re also watching Sierra closely, in view of their new .30 cal. Tipped MatchKings. They seem to have been redesigned using hybrid principles, as opposed to just slapping a plastic tip on a legacy form factor, and so we’re anticipating great things from future 6.5mm Tipped MatchKings.
Yo Joe!