Precision, Caliber-Specific Funnels Make Reloading Easier
Having a quality funnel helps you get carefully-measured powder charges in your cases, with no spillage, every time. If you’ve tried cheap, plastic funnels you know that they can rock on the case mouth. Also, if the fit isn’t good, some kernels end up on your bench, instead of inside the case.
Thankfully, precision, caliber-specific metal funnels are available to reloaders for about $10-$12.00. Satern Custom Machining funnels feature an aluminum top with a caliber-specific, machined brass base/neck. The Satern funnel’s aluminum body is completely static-free so powder flows into the case without bridging. Dick Saunders makes a similar, turned-aluminum funnel sized for particular calibers. Both these metal funnels make reloading easier (and they are ideal for blackpowder loading because they do not give off static electricity). As Forum member Wes notes, with a fitted metal funnel: “the possibility of the funnel sliding to the side, and spilling powder all over the place is drastically reduced.”
Satern Aluminum/Brass Funnels
Steve Satern crafts rugged aluminum funnels with brass ends. The caliber-specific sizes offer a snug fit that keeps the funnel tight on the case neck while the powder is flowing. Forum member Danny Reever reports: “If you are tired of the generic ‘fits all’ funnels falling over and powder spraying every where, try one of the Satern funnels. Sinclair Int’l sells them and they are top notch.” SMike308 adds: “I have retired my plastic funnels after buying my first Satern funnel. I now have one for each different caliber that I load for. I especially like that the Satern has the brass weight at the bottom, which adds stability to the funnel.”
Satern funnels are sold by MidwayUSA (6mm $11.29), Satern Machining (6mm $11.25), and Sinclair International (Item 11-9XX, 6mm $11.95). Satern Machining also offers two types of universal funnels, 22-30 caliber and 30-50 caliber. Satern’s universal funnels, along with the larger .338 to .50 caliber funnels, cost $18.45.
Saunders Aluminum Funnels
Some of our Forum members prefer the turned aluminum funnels made by Dick Saunders. You’ll need to order these direct from Saunders. Specify .17, .20, .22, 6mm, 6.5mm, .30 caliber or “all-purpose”. The Saunders funnels start at about $10.00. Contact Dick Saunders at the address below:
Dick Saunders
145 Delphi Rd.
Manchester, IA 52057
563-927-4026
Similar Posts:
- Premium Powder Funnels for Precision Reloading
- Lyman Precision Powder Funnel Set with Caliber-Specific Inserts
- Reloading Gear Review — Lyman Precision Powder Funnel Set
- New Precision Powder Funnel from 21st Century
- Precision Powder Funnels from 21st Century Shooting
Share the post "Precision, Caliber-Specific Funnels Make Reloading Easier"
Tags: Aluminum, Caliber, Funnel, Satern Saunders
I started out with a .308 and a .224 funnel. Now I have added: .243; .264; .284; .338; .375; and .458. With a fast electronic scale or my JDS measure I can fill one hundred cases quickly, and without spilling a kernel.
These also work well with my drop tubes. If a shooter is only loading one or two calibers (I have to load over sixty calibers), there is no reason not to use these funnels.
lawndart
After getting my first one for my 6.5 x47 Lapua, I bought one for each caliber I load. These are great!
I have two; they are the only funnels to buy and will last a lifetime.
I didn’t know Saunders was an Iowegian too. Two great funnels makers in Iowa. I have both, prefer the Steve’s mostly cause they’re larger. Scheels stores carry ‘em too. My favorite funnels, though, are of the ‘cake’ variety at carnivals.