New AR-Comp Powder Starts Shipping This Week
Alliant is introducing a new extruded powder, AR-Comp. AR-Comp is an advanced re-formulation of Reloder 15, a double-base Bofors powder. There are changes to internal and external chemistry to provide much better pressure/velocity stability across a wide range of temperatures. The main difference between AR-Comp and Reloder 15, is the AR-Comp has a slightly faster burn rate, and AR-Comp is much LESS Sensitive to temperature changes. AR-Comp is a small-kernel, double-base extruded powder like Reloder 15, so it will continue to meter just like Reloder 15. The load density should be the same as Reloder 15.
AR-Comp should be at Grafs.com in a Couple Weeks
Here’s the good news — Alliant will start shipping AR-Comp to Grafs.com later this week. Dick Quesenberry, Alliant Powder Product Manager, told us: “I just received the AR-Comp packaging labels and we hope to send off the first shipments to Grafs this week.” With transit time, expect the powder to be available from Grafs.com by the second week of June. You can go ahead and place advance orders for 1-lb and 8-lb containers of AR-Comp on the Grafs.com website.
AR-Comp Offers Uniform Velocities over a Wide Temp Range
Tests were done with .223 Rem and .308 Win ammo, loaded with AR-Comp and maintained at temps from -20° F to +160° F in a controlled test center. The ammo itself was heated or cooled to targeted temps before testing. Across that entire range of temperature, -20° F to +160° F, the ammo loaded with AR-Comp showed a variation of only 20 fps in muzzle velocity. The primary bullet type tested was a 77gr .224 bullet and the secondary was a 175gr .308 bullet.
Burn Rate Like Varget
Though this is a reformulation of Reloder 15, the burn rate of AR-Comp is slightly faster than Reloder 15. Alliant told us: “Reloder 15 is slightly slower, in burn rate, than Varget. The new AR-Comp, with the enhancements, ended up slightly faster than Reloder 15, so it is now very close to Varget in burn rate”. This is the result of the “tuning” of the powder to be much less temp-sensitive.
AR-Comp First in Series of New Alliant Temp-Stable Powders
AR-Comp will be the first in a series of “new generation” temp-stable powders from Alliant. Quesenberry noted: “Our goal was to provide a powder that offers stable pressures in all temperatures. Shooters want to be able to stay with the same load in winter and in summer, in cold or in hot conditions.” Quesenberry added: “We’ve been working on this quite a while. AR-Comp is the first example and we hope to extend this to other rifle powders. It’s a tough job. You have to balance the performance carefully. We worked very hard to do just that and we think shooters will be impressed with the results.”
Reloder 15 Will Stay in Production
Fans of Alliant’s Reloder 15 don’t need to worry. Alliant will keep Reloder 15 in production. “We don’t drop powder lines”, said Quesenberry.
Similar Posts:
- New AR-Comp Powder from Alliant — Details Revealed
- New AR-Comp Powder from Alliant — Swedish Varget?
- Alliant Reloder 17 Ships in Late July
- SHOT Show Report: Alliant's Five New Power Pro Ball Powders
- Alliant Releases NEW Reloder 17 Powder
Tags: Alliant, AR-Comp, ATK, Reloader 15, Reloder 15, RL 15, Varget
Hmmmm…. I hope it burns cleaner than Varget or RL-15.
I’m anxious to try this in my 6BR with the heavy bullets. Tweaking my RL15 loads for each match gets old (temp sensitive). I just want to load and shoot after finding an accurate combo, and not worry about a 5-degree change in temp. 8208 had promise to offer the same, but it didn’t deliver (for me, and my 6BR anyway). We’ll see how this stuff works….
In stock now at Graf – http://www.grafs.com/retail/catalog/product/productId/23037
“We don’t drop powder lines”, said Quesenberry.
Wonder where RL12 went to ????
may be a good grendel powder