Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









July 22nd, 2011

Gear Give-Away Contest from Midsouth Shooters Supply

Midsouth Shooters Supply, one of AccurateShooter.com’s long-term sponsors, is running a Gear Give-Away Contest to promote Midsouth’s Hunting University TV show. It’s easy to enter and no purchase is necessary. Simply click the link at right, let the page load, then fill in your name, email address, and optional comment. Prizes are donated by name-brand manufacturers, including Bad Bull, Gamo (airguns), Hornady, Hevi-Shot, Hypertech, and Limbsaver. Prizes will include Hats, Ammo, Hunting Gear, and Hunting Trips! Entry is free, just click to load the Contest Entry Page.

hunting university

Permalink Hot Deals, News 3 Comments »
July 21st, 2011

Vihtavuori Reloading Data Updated for Seven Cartridge Types

If you read our 2011 Super Shoot Report by James Mock, you’ll see that Vihtavuori N133 powder is the overwhelming choice of top short-range benchrest shooters for loading their 6PPCs. Other Vihtavuori powders, such as N135, N150, and N550 are also very popular for other match and hunting cartridges.

If you currently use a Vihtavuori (VV) powder, or you plan to try a Vihtavuori powder in the near future, visit www.Lapua.com soon. Load info on Lapua’s Vihtavuori Reloading Data Page has been updated (or added) for the following calibers: .222 Remington, .223 Remington, .223 WSSM (new caliber data), .22-250 Remington, 6.5 Grendel, 6.5×47 Lapua, and 7.62x53R. In the updated tables, you’ll find VV powder recipes for a wide variety of bullets from Hornady, Lapua, Nosler, Sierra, Speer and other bullet-makers.

Though these recipes are fairly conservative, always start low and work up gradually when using a new powder for the first time. Likewise, you should back off your load if you change ANY component or if you have fitted a new barrel to your rifle.

Vihtavuori N100 Series
The N100 series powders are single-base powders used mainly in rifle calibers. There are ten N100 series powders with different burning rates and suitability from the .17 Remington up to the .458 Winchester Magnum and two special powders for .50 BMG.

N500 Series
The N500 series powders are impregnated extruded rifle powders with Nitroglycerol added as extra energy component. If higher loading densities and more energy are needed, N500 series powders are competent alternatives for the N100 series powders. N500 series High Energy powders are available in five different burning rates.

Story tip by EdLongrange. We welcome submissions from our readers.
Permalink News, Reloading 5 Comments »
July 20th, 2011

EuroOptic’s Super Deal on SAKO TRG42 in .338 Lapua Magnum

If you’ve ever lusted for a SAKO TRG42 in .338 Lapua Magnum, now’s the time to break out the checkbook. This could be the deal of the decade. EuroOptic.com is selling brand new, .338 LM SAKO TRG42s for just $2250.00. That is not a misprint. For a limited time (while supplies last), EuroOptic is offering AccurateShooter.com readers new TRG42s in .338 Lapua Magnum for just $2250.00 — that’s over $1000.00 cheaper than the price at some other gun vendors. This was a special purchase, and inventory is limited, so don’t delay. The TRG42s have black furniture with a matte black barrel finish (not phosphate), and no Picatinny rail. The $2250.00 price applies only to black-stock models, chambered in .338 LM. Shop around and you’ll see you can’t come close to this price on a new TRG42 anywhere else. If you order, mention AccurateShooter.com to get the $2250.00 special price.

SAKO TRG42 in .338 Lapua Magnum for $2250.00
Sako TRG 42 338 Lapua Magnum

EuroOptic Exclusive: .260 Remington TRG22s
Want a SAKO TRG22 chambered in .260 Remington? Well you won’t find one at your local gunstore. EuroOptic.com commissioned a special run of .260 Rem TRG22s, SNs 0XX-200, and they are now in stock. These are fitted with 26″, 1:8″ twist, black phosphate-coated barrels. Actions come with milspec Picatinny rails pre-installed. Four different stock finishes are currently available: Matte Black, Remington Green, Desert Digital Camo, and Woodland Digital Camo. The Camo stock sets are an Eurooptic exclusive — not available anywhere else. These are very special rifles, and with the high interest in the .260 Rem cartridge (which won the National High Power Championship in the hands of SGT Sherri Gallagher), you can expect the rifles to sell out quickly. Price for the .260 Rem TRG22s in black and green is $3100.00. The Digital Camo versions are priced somewhat higher, at $3350.00. Shown below is a the TRG22 in Desert Digital. If you have questions, call (570) 220-3159 and ask for Jason Baney. CLICK HERE for sale info and rifle specs.

Sako .260 Rem Remington TRG 22

SAKO TRG 22 Rifle Technical Data (Factory flyer)

Permalink Hot Deals, News No Comments »
July 20th, 2011

Top Shot Season 3 Debuts August 9th — Meet the Cast

Top Shot fans… get ready. The third season of the hit TV show Top Shot premiers on the History Channel Tuesday, August 9th at 10:00pm (9:00pm Central). Visit History.com for photos and bios of all Season 3’s sixteen new competitors. Those vying for the $100,000 Top Shot grand prize include Mike Hughes, a USPSA production division shooter from Washington, and ace ICORE and USPSA wheelgunner Cliff Walsh of Florida. Other practical pistol shooters include Amanda Hardin from Alabama and Mark Schneider of Florida. Watch the video below for a Season 3 sneak peek, including short profiles of all the competitors.

Top Shot Season 3 Preview — Meet the Cast

Permalink - Videos, News No Comments »
July 20th, 2011

Shooting USA Showcases Fort Benning 3-Gun This Week

Fort Benning 3-GunFans of 3-Gun competition should watch this week’s episode of Shooting USA television. Wednesday’s show features the Fort Benning 3-Gun event, the only multi-gun match held on an active Army base. At this 3-Gun match, the USAMU Action Shooting Team created very tough stages, with combat-type challenges for the competitors. The video below shows stages at the 2010 Fort Benning 3-Gun Competition. The video begins with a competitor firing an Army-supplied M249 machine gun.

M24EI Sniper Rifle, Henry Rifle, and Julie Golob Also Featured
In addition to the Fort Benning 3-Gun coverage, this week’s ShootingUSA broadcast features three other interesting items. Shooting USA provides a first look at the U.S. Army’s new, upgraded sniper rifle, the M24EI, based on Remington’s XM-2010 modular rifle. Also, Shooting USA tells the history of the Henry Rifle, the first really successful lever rifle and the predecessor of Winchester’s classic Model 1866 and Model 1873 lever guns. Last but not least, Team Smith & Wesson captain Julie Golob gives a lesson in IDPA shooting — one of today’s most popular pistol competitions.


This rare .44 caliber Henry rifle, used during the Civil War, sold for $48,300 at a 2009 auction.

Shooting USA airs Wednesday on the Outdoor Channel at these times:

Eastern: 4:00 PM, 8:30PM, 12:00 Midnight | Central: 3:00 PM, 7:30PM, 11:00 PM
Mountain: 2:00 PM, 6:30PM, 10:00PM | Pacific: 1:00 PM, 5:30PM, 9:00 PM

Permalink - Videos, Shooting Skills No Comments »
July 19th, 2011

ATF Reports Rifle Production Down, Handgun Production Up

Americans are apparently buying more pistols but fewer rifles — that’s the trend suggested by the latest Firearms production statistics from the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). According to the ATF’s 2010 Interim Annual Firearm Manufacturing and Export Report, U.S. firearm manufacturers produced more than 5.4 million firearms in 2010. This represented a small (2.7%) reduction in total U.S. firearm production compared to 2009. However, the really notable statistic was a dramatic 18.8% reduction in rifle production. Rifle production decreased 18.8%, while handgun production increased 14.9%. That’s a big swing. Shotgun production remained relatively steady, only dropping 1.2 percent.

Firearms Production ATF

Editor’s Comment: Since these are production numbers, not sales figures, it may be premature to say that American shooters are spending a lot less money on rifles, but we know that sales of AR-type “black rifles” are down significantly. There was a rush of AR “panic buying” after the last presidential election that was not sustained. We are also concerned that fewer young Americans are learning to shoot rifles, while the average age of target rifle shooters continues to climb. We need to expand efforts to get young people involved in rifle shooting and hunting.

Permalink News No Comments »
July 19th, 2011

Keith Lay Wins 2011 Black Powder Target Rifle Nationals

Keith Lay edged fellow shooter Jack Odor to take home the title of 2011 Creedmoor Nationals Black Powder Target Rifle Champion. Lay’s spotter, Dan Theodore, received the High Spotter Award. Lay and Theodore also won the two-man team award with a 1004-12X combined score.

As overall champion, Lay received a handsome black powder rifle donated by Gale and Paul Shuttleworth of Central Pennsylvania Arms. In the photo you can see Keith with the rifle and the historic Castle Trophy, a perpetual award for the event’s top marksman. Congratulations to this year’s winners, staff, sponsors and competitors for making the 2011 Creedmoor Nationals Black Powder Rifle Championships such a success.

2011 Creedmoor Nationals Category Winners
Open Gold Keith Lay – 514 6X
800 Yards Aggregate Dave Gullo – 196 11X
900 Yards Aggregate Keith Lay – 173 1X
1000 Yards Aggregate Jack Odor – 163
High Military Rifle Dennis Bruns
High Muzzle Loader Lee Shaver – 444 8X
High Newcomer Trent Lawrence – 464 3X
High Scope Darrell Tonn – 464 4X
High Senior Bob Engelbach – 494 3X
High Spotter Dan Theodore
High Tollofson Jim Terry – 451 7X
High Woman Margo Hanson – 476 6X
High Marksman Jen Griffis – 430 6X
High Sharpshooter Brice Harper – 354 2X
High Expert Chip Mate – 489 5X
High Master Dave Gullo – 501 14X

Permalink News 3 Comments »
July 19th, 2011

Problem with Tailgaters? Try a Claymore Hitch Cover…

What do you get for the man who has everything? How about a replica Claymore mine trailer hitch cover. Produced by GG&G, a leading maker of scope rails and other gun accessories, the hitch cover tells tailgaters to “back off”. The Replica Claymore Hitch Cover is sized like the real deal and fits standard 2″ hitch receivers. It is manufactured from UV-stabilized polypropylene plastic. Each GG&G Claymore Hitch Cover has a red panel attached to both side edges with the word “REPLICA”. However, this item is still prohibited in some jurisdictions. Please read the Important Legal Disclosures below.

GG&G replica claymore mine hitch

The Claymore Hitch Cover is currently on sale for $39.95. If you like the idea, but don’t have a trailer hitch on your vehicle, check out the $37.00 Claymore Desk Accessory. It’s a perfect “conversation piece” for your den or office. The Desk Accessory It looks identical to the Claymore Hitch Cover but has an easel-type support.

ATTENTION — PLEASE READ CAREFULLY PRIOR TO ORDERING
NOTICE: This product is prohibited in some states including,
but not limited to, the following:

Colorado — This item is prohibited under Colorado 18-12-109, Para. 7.
Florida — This item is prohibited under Florida Statute 790.165
Connecticut — Statutes indicate that this item may be prohibited.
New Hampshire — Statutes indicate that this item may be prohibited.

State, county and municipal laws pertaining to items such as the Claymore Hitch Cover are varied. This product is prohibited in certain states. The purchaser and end user are responsible for knowing exactly what the local laws are concerning purchasing or displaying this product and for abiding by those laws. It is your responsibility before purchasing this product to know the local laws. The purchaser and the end user understand that the use of any look-alike or replica explosive in commission of a crime may carry the same legal ramifications as if real explosives had been so used.
Permalink New Product 1 Comment »
July 18th, 2011

Leo Anderson Smashes 1000-Yard Score Aggregate Records

Leo Anderson 1000 yard recordMontana 1K benchrest shooter Leo Anderson has set a pair of astounding multi-match Light Gun Score Agg records. These are “records for the ages”. This season, Leo’s 6-match Score Aggregate was 99.5 (99,99,99,100,100,100), while his 10-match Score Aggregate was 96.8 (84,94,95,98,99,99,99,100,100,100). That’s amazing consistency. Given how hard it is to shoot a single 100 score at 1000 yards, Leo’s Aggs are jaw-dropping. It will be a long time before these Agg records are broken (if they ever are). Leo set his 99.5 (6-match) and 96.8 (10-match) records shooting a 17-lb rifle chambered for the 6mm Dasher. The Lawrence barrel was chambered by Montana gunsmith John King and Leo did the stock work himself (starting with a Shehane MBR Tracker).

Leo Anderson 1000 yard record

99.5 Six-Match Agg and 96.5 Ten-Match Agg at 1000 Yards
Leo set these multi-match Agg records at the Deep Creek Range near Missoula, Montana. Tom Mousel, another record-holding Montana shooter reports: “Our Agg season is now complete here in Montana. Leo ‘Legend’ Anderson has broken both the 6-match and 10-match score aggregate records. He hasn’t just broken them, he has smashed them, with a couple Aggs that are truly remarkable. As a fellow 1000-yard competitor, I fully understand what it takes to grind out a quality Aggregate. What Leo has done this year is the most impressive thing I think we might ever see in the 1000-yard benchrest game. Leo is one of the best of the ‘good guys’, and also, in my opinion, Leo is the best 1000-yard shooter to ever grace our sport. You’d have to check with Leo, but I believe these are his 14th and 15th world records in his career. Leo also holds our Club record for Light Gun group and score, when he drilled a 3.476″/100 back in August of 2008″. (See photo below)

Leo Anderson 1000 yard record

Record-Breaking 6mm Dasher Light Gun Specs
There’s nothing really exotic about the 17-lb Light Gun with which Leo set his score records. The stock is a laminated Shehane MBR Tracker with some modifications by Leo to make it track better. Leo altered the angle of the toe to match the forearm and modified the taper of the sides of the buttstock to ride better in the bags. Pillar-bedded into the stock is a Stiller Viper Drop Port. Leo loves this action. He says it is very fast to operate and the flat bottom makes it easy to install in the stock. In addition, the Viper action works well with his preferred CCI 400 primers: “I can run stout loads of H4895 with the Viper without cratering the primers. Some guys with other factory and custom actions have problems with the CCI 400s which are not as hard as the 450s.”

The 29.5″, 5-groove, 0.237″ land, HV-counter barrel was crafted by Lawrence Barrels. Based in Lewiston, Montana, Lawrence Barrels currently makes mostly AR barrels, but Leo says they make great cut-rifled tubes: “I currently have Lawrence barrels on both my Light Gun and my Heavy Gun. These Lawrence barrels both shoot great. I think they are the equal of the best examples from top barrel-makers such as Krieger and Bartlein.” Leo has tried straight-contour barrels, but he prefers some taper (similar to a Krieger #17 contour): “In my experience, tapered barrels seem to shoot better, at least in a 17-pounder. The gun is less nose-heavy and tracks better.” The barrel on Leo’s record-setting Light Gun currently has about 900 rounds through it.

For optics, Leo runs a 12-42x56mm Nightforce BR model with NP2DD reticle. Leo tells us: “the NP2DD reticle is my favorite and I have great confidence in the Nightforce. We tried it side-by-side with a big name European-made high magnification scope, and the Nightforce was visibly better. At 1000 yards it had better clarity, better sharpness, better resolution.”

Record Setting Dasher Recipe: Berger 105gr VLD, Hodgdon H4895, CCI 400, Lapua Brass
While many top 6mmBR and Dasher shooters use Varget or Reloder 15, Leo prefers Hodgdon H4895, which has a slightly faster burn rate. Leo tells us: “Right now, the H4895 and CCI combo is giving the best accuracy, and it’s a clean combination. I’ve shot a lot of Reloder 15, but the H4895 burns so much cleaner.” Leo’s load is running around 3050 fps, but “he’s not too concerned with what the chronograph says — when we tune our loads we go by what shows up on the target.” Leo is loading a bit more than 32 grains of H4895. (Editor’s NOTE: This load is for fully fire-formed Dasher cases ONLY. It is NOT safe to use in a 6mmbr with 105s.) Leo’s favorite projectiles are the “thin-jacket” Berger 105gr VLDs, pointed with a Whidden pointing tool. Leo turns his necks with a K&M neck turner.

To save on barrel life, Leo fire-forms his brass using a separate barrel. He prepares the brass with a false shoulder, then fires the cases loaded with pistol powder, cream of wheat and low-density plug in the end. He tried forming case with pistol powder alone, but that required much more powder and didn’t produce results as good as the cream of wheat method.

Shooting Fast — the Importance of Smooth Tracking
Leo tells us that you need a great-tracking rig to be competitive in the 1K game these days: “Some guys are getting 10 shots downrange in 20 seconds or less. It takes me about 30 seconds.” To shoot that fast, the gun needs to track perfectly so you can just slide it back and stay on target. “If you want to shoot fast, everything’s got to be working right — and your stock really needs to track well. If you’re chasing the knobs on your rest, you’re not getting [your bullets] down range.” Leo says the stock’s geometry must be “near perfect” in order for the gun to come back to the same spot shot after shot.

Leo Anderson’s Advice for New Long-Range Shooters.

We asked Leo if he had any advice for shooters new to the long-range benchrest game. Here are some of his thoughts:

1. Pick a Winning Cartridge – Leo thinks the Dasher is just about perfect for a 17-lb rifle: “Any more cartridge than that, you have too much gun movement. Something in the Dasher range is the perfect size. We shoot the Dashers around the 3050 fps node. Even with the 6-6.5×47 you’re just burning more powder, and at the higher node, the gun starts rocking and things start getting away from you.”

2. Get Good Equipment Right from the Start – “Go ahead and bite the bullet and buy good stuff right off. Too many guys try to get off cheap in the beginning. They end up buying two or three guns as they upgrade. You save money in the long run by buying good stuff in the beginning.”

3. Practice, Practice, Practice – “We get a lot of practice in the process of tuning and load development. We put in the time — on things like bullet sorting, case prep, load tuning.”

4. Keep Pushing for Perfection – “A lot of guys get a load that seems pretty good, and then they get lazy. Don’t be content when you get a 6-inch group at 1000, because the gun might shoot a LOT better. I’ve got Aggs in the five-inch range.”

Leo Anderson 1000 yard record
Leo reports: “Here’s our ‘secret’ 1000-yard range out in the sticks where we do some spring tuning”.

Permalink Competition, News 6 Comments »
July 18th, 2011

Revive Your Brass with DJ’s Brass Service & Restoration

With top-quality cartridge brass approaching $1.00 per case, it’s more important than ever to get maximum life from your match brass. Annealing can extend the useful life of your brass, and ultrasonic cleaning allows you to eliminate carbon build-up inside cases that have been fired numerous times. You can certainly do annealing and ultrasonic cleaning yourself, but to get the best (and most consistent) results, you’ll need to invest in quality equipment and spend a good deal of time and effort learning how to use it properly. Likewise, turning case necks requires expensive tools, and it takes time and practice before you’ll get perfectly-turned necks.

DJs Brass Offers Annealing, Cleaning, and Neck-Turning
If you don’t have the resources to purchase annealing and ultrasonic cleaning machines, or if you don’t have the time to neck-turn hundreds of cases — don’t fret, there is an affordable option. DJsBrass.com, run by benchrest shooter Darrell Jones, offers annealing, ultrasonic cleaning, neck-turning, and complete brass prep services (including OAL trimming) at very reasonable rates. Darrell will anneal 100 cases for $15, and he’ll neck-turn your cases (any caliber), starting at $30.00 per hundred. Even if you’re a skilled neck-turner, if you just acquired a new caliber, it might make sense to send the work to Darrell, instead of purchasing new expander mandrels and turning arbors.

False-Shoulder Forming for Wildcats
Do you shoot an “improved” short-necked wildcat like the 6mm Dasher? Want your fire-forming to go without a hitch? Darrell can take your parent brass and create a false shoulder so you get a good crush fit in the chamber. If you’re running a tight-necked chamber he can create a false shoulder AND turn the top half of the neck to fit your chamber.

Video Shows Annealing Process
In the video below, Darrell explains the wide variety of brass restoration services he offers. Darrell says he can “bring your brass back to life” and we have found that to be true. We had some 6mmBR brass with no-turn necks that started to lose their “competitive edge” after just 7-8 loadings. The neck tension had become inconsistent from case to case, and bullet seating force (measured with a gauge-equipped K&M arbor press) varied widely. We were seeing unexplained flyers, and ES had nearly doubled compared to when the brass was fresh. Annealing the cases really made a difference. The neck tension was much more consistent and bullets seated more uniformly with less “spiking” of seating force. Paying $15 for annealing is a lot cheaper than buying a new box of brass for $80.00 or more!

Darrell offers a variety of services at affordable rates. To order work by Darrell, visit DJsBrass.com, or call (205) 461-4680:

Case Annealing Only
Cost: $15.00/100 for standard cases; $20.00/100 for magnum cases.*

Combination Service (Cleaning and Annealing)
Ultrasonic Cleaning, Check for split necks, Anneal case necks.
Cost: Starting at $20.00/100 standard and $25.00/100 for magnum cases.*

Full Service (Case Prep, Cleaning, Annealing)
Uniform primer pockets, Chamfer, Ultrasonic cleaning/polishing, Anneal case necks.
Cost: Starting at $30.00/100 and up.*

Neck Turning or Trim-to-Length Custom Order Service
Cost: Starting at $30.00/100 for standard cases.*
(Darrell can also resize necks or false shoulder your cases. Call for quotes.)

Muzzle Brake Ultrasonic Cleaning
Removes carbon buildup to restore critical bullet clearance requirements.
Cost: $15.00 + flat rate USPS actual shipping.

*Add USPS flat-rate return shipping. Call (205) 461-4680 for quotes on miscellaneous, military bulk brass or high volume discount. Note: Prices subject to change.

Permalink Bullets, Brass, Ammo, New Product, Reloading 1 Comment »