TECH TIP: Smooth Powder Dispensing with Modified Straw
Here’s a clever, easy modification for your RCBS ChargeMaster electronic powder dispenser. Many folks use a McDonald’s straw to smooth kernel flow out of the dispensing tube. Forum member Mike S. (aka in2deep) found that, even with a straw in place, he sometimes got clumps, which dropped 5-6 kernels at once, throwing off his dispensed weight.
Mike looked at the situation and ingeniously decided to trim the straw into little v-shaped arms or prongs. This helps to break up the clumps, so the kernels flow out the end of the tube more consistently during the dispense cycle. Mike writes:
Soda Straw Modification
This is a further tweak of the popular soda straw modification as the original mod would still allow Varget powder to collect in the straw and dump sometimes as many as 6 or 8 or even more extra kernels in the pan. It would sometimes signal an overcharge, but even when it didn’t there could be as many as 6+ kernels too high or too low (total spread of 12+).
The little arms (prongs) on the straw tend to separate the kernels into groups of 1 or 2 or 3 and prevents piling and many times the throw is now within 1 or 2 kernels of the desired weight.
Credit Boyd Allen for sourcing this tip.Straw Cutting Tips — Mike found the shape/angle of the “arms” is very important. If the cuts are too fine or too course it allows the kernels to collect almost like before but the illustrated angle seems to allow an average of only 2 or 3 kernels per trickle input from the machine. This means that more charges are much closer to the actual desired weight and max kernel variances will be cut in less than half and there will be almost no overthrows.
Similar Posts:
- Bench Hacks 101: Modified Straw Trick for ChargeMasters
- Tuning Tips for RCBS ChargeMaster — And EZ Straw Tweak
- Tune and Tweak Your ChargeMaster for Better Performance
- Tips to Improve ChargeMaster Performance and Precision
- How to Improve Performance of Older RCBS ChargeMaster
Share the post "TECH TIP: Smooth Powder Dispensing with Modified Straw"
Tags: Dispenser, Electronic Dispenser, Kernels, McDonald's, Powder, RCBS Chargemaster, Straw
Great info. Thanks
I had noticed that my Redding powder trickler has a very small opening in the hopper with a very narrow powder stream so I covered up part of the port on my electric dispenser to diminish clumps too.
How much of the straw goes into the dispenser?
Did this straw mod to my CM today, awesome!
Cut down on the rethrows significantly.
Thank you for the terrific tip!