Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









January 13th, 2013

Sling Shooter Learns the F-TR Game

Following shoulder surgery, our Contributing Editor German Salazar moved to F-TR shooting, replacing his sling and iron sights with bipod and scope. German has done remarkably well for an F-TR newbie, winning his first two 500-yard matches (in F-TR class) at Phoenix-area ranges. German has been shooting his “old Palma rifle with a scope and bipod attached”. This rig features a Gilkes-Ross action in a Robertson/Sitman Highpower Prone stock with an Anschütz 5020 trigger and 30″ 1:11″-twist Krieger barrel. The rifle is fitted with a Canadian-made Rempel “Ski” bipod and a Leupold BR 24X scope.

On his Riflemans’ Journal website, German has crafted a helpful article with advice for “sling shooters contemplating a busman’s holiday into F-Class.” Even seasoned F-Class shooters can learn something from German’s observations in his F-TR: Scoping it Out article. Here are some highlights from the article:

Carpet Under the Bipod
“I quickly learned that a piece of carpet was an essential component under the bipod. Without the carpet, [on dirt surfaces] the bipod tends to dig into the dirt with every shot, resulting in odd elevation shots. On the concrete it isn’t quite as essential, but it smooths the recoil movement appreciably and is worthwhile. [I used] a short-nap carpet remnant for this, but my car floor mat also worked well.”

F-TR rifle salazar

Clicking vs. Holding Off
“I’ve been shooting iron sights and clicking sight knobs for most of my life; trying to hold off made me very uncomfortable and the reflex pull of the trigger just wasn’t there. Once I returned to holding center and clicking, I was more comfortable and was able to execute my shots more quickly and cleanly. By zeroing the windage knob I can also easily return to a previous setting when conditions warrant.”

Reading Mirage with Spotting Scope
“In conversations with other F-Class shooters in our club, I found that few were using a spotting scope to see mirage; they were largely relying on the rifle scope. However, the rifle scope is focused on the target, as it must be to eliminate parallax, and thus cannot show mirage with the same clarity as a spotting scope that is focused roughly halfway down the range.”

F-TR rifle salazar

Positioning Your Spotting Scope
“I position the spotting scope in the same manner as I did when shooting from the sling. It is very close to me and can be used without moving the head from the cheekpiece. The object, as always, is to minimize movement in order to maintain a consistent position and to minimize the time lost between the last glance at the mirage and breaking the shot.”

CLICK HERE to Read Full F-TR Article by German Salazar

German’s F-TR article first appeared in 2011. Since then German has had another shoulder surgery, but he is progressing well.
Permalink Competition, Shooting Skills 5 Comments »
January 13th, 2013

Video Interview with Walt Berger and Eric Stecker

Berger Bullets boxSinclair Int’l has released a 7-part series of video interviews with Walt Berger (founder of Berger Bullets) and Eric Stecker (Berger’s Exec. VP and Master Bulletsmith). The series is hosted by Sinclair’s President, Bill Gravatt. You can watch Parts 1 and 2 of the interview here, and we’ve provided links to the remaining Parts 3 through 7. All seven interview segments offer interesting material. Part 6 mentions up and coming stuff like the reloading manual. Part 7, over 13 minutes long, contains interesting discussions of bullet testing and the hunting performance of Berger VLDs. NOTE: You can view this entire video series (and many other videos) on Sinclair’s YouTube Channel Page.

Berger Interview PART 1

Berger Interview PART 2

Permalink - Videos, Bullets, Brass, Ammo 1 Comment »
January 13th, 2013

Speedy Offers Precision Bedding Seminar at Murray State

Speedy Bedding ClassThomas “Speedy” Gonzalez, a Hall of Fame shooter, will be teaching a “PRECISION BEDDING” class at Murray State Junior College (Tishomingo, OK) the week of June 10-14, 2013. The class will be limited from 12 to 14 students.

Speedy tells us: “We will go over the theory and physics of bedding and different materials, processes and procedures used to ensure a long-lasting and accurate bedding job. I will demonstrate [how to get best results] through proper control and knowledge of the bedding process and we will spend the remainder of the week bedding rifles students bring with them to class. A full list of tools will be post on Murray State NRA web site. I look forward to seeing some of you there.”

To register for the Precision Bedding Seminar
at Murray State, contact either:

Elaine Reese
Secretary/Gunsmithing Dept.
580-371-2371 ext. 243
rees0919 [at] student.mscok.edu

Chad Mercer
NRA Coordinator
580-371-2371 ext. 244
cmercer [at] mscok.edu

Permalink Gunsmithing 1 Comment »