Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









June 20th, 2013

USAMU Article Explains Sight Pictures for Metallic Sights

In an article for the CMP Online Magazine, SSG Tobie Tomlinson of the USAMU Service Rifle Team explains the various sight alignments employed by iron sights shooters. Tobie writes: “There are a myriad of sight picture options that shooters have used to great effect over the years. The sight picture that allows you to consistently shoot the smallest group, with a minimal shift in zeros, is the correct one. Remember, for any shooter to be successful, consistent sight picture must be complemented by front sight focus and sight alignment.”

CLICK HERE to read FULL ARTICLE

Center Hold
The front sight is placed directly in the center of the target. A center hold is great in different light conditions. On a bright day the target appears small. On a dark day the target appears large. In [any] light conditions the center of the target is always in the center. A shooter who has problems with elevation shots in various light conditions may benefit from a center hold.

6 O’Clock Hold
With the 6 O’Clock hold the front sight is placed at the bottom of the aiming black. For many shooters, this hold allows precision placement of the front sight. The ability to accurately call your shots will come with time and experience. Light changes, which alter the appearance of the target, may affect shooters who utilize the 6 O’Clock hold.

Sub 6 Hold
The sub 6 is just like the 6 O’Clock hold, only there is a small line of white between the front sight and the aiming black. Many shooters have a problem determining the exact 6 O’Clock position with their front sight, but by using a sub 6 or line of white they may be able to better estimate their hold.

Frame Hold
With the frame hold, just like with the other holds, the front sight is in the center of the rear sight. The front sight can then be placed at the 6 or 12 O’Clock position on the frame when there is no visible aiming point. This hold is typically reserved for foul weather and poor light conditions. By placing the front sight at the top or bottom of the frame, a shooter may hold better when there is little target to see. It can be difficult to hold a tight group this way, but it may add more hits in bad conditions. This technique is normally applied when shooting longer ranges such 600 or 1000 yards.

CLICK HERE for more articles from The FIRST SHOT, CMP Online Magazine.

Permalink - Articles, Competition, Shooting Skills No Comments »
June 20th, 2013

Recommended Gear: Howard Leight MAX-1 NRR 33 Ear Plugs

accurateshooter.com review Max-1 Howard Leight ear plugsBetween shooting, riding motorcycles, and working with gas-powered yard equipment, your Editor probably has foam plugs in his ears 8-12 hours a week. I’ve tried many different varieties of ear plugs, both the foam variety and the soft plastic flange-type plugs.

I’ve recently started using the Howard Leight MAX-1 plugs. Rated at NRR33, these are, quite simply, the best ear-plugs I’ve ever tried. No BS — these things really work. Among all disposable plugs I’ve tried, the MAX-1s are definitely the most effective at blocking noise, and they are also more comfortable than most other foam plugs I’ve used. In my experience at the range, these plugs block sound way better than most muffs (when worn without plugs underneath).

The first thing I noticed about these plugs is how much more effective they were than muffs alone. With muffs in place, a rifle report is still quite audible. With the red MAX-1 plugs, the noise from a shot is much, much quieter. Proof of the “real world” effectiveness of these plugs came when talking. The plugs work so well that I had trouble hearing words spoken by a colleague from just four feet away. With conventional (non-electronic) muffs I can hear a normal speaking voice from many yards away.

These MAX-1 plugs insert easily (if you roll them first), and the wide, flared outer bell makes them very easy to remove. Subjectively, these plugs seem more comfortable than most other foam plugs I have tried. They are certainly way more comfortable than the cheap, non-tapered ear plugs. MAX-1 plugs are available in both standard configuration and corded versions. These are cheap to buy — 20 pairs of non-corded MAX-1s cost just $4.25 on Amazon.com.

accurateshooter.com review Max-1 Howard Leight ear plugs

I’m not the only one who likes the Leight MAX-1 plugs. Here are some comments from verified purchasers on Amazon.com:

These ear plugs deserve all the raves they’ve received. They’re by far the best I’ve used and among the least expensive. They hold up very well when used repeatedly. This is the only brand I’ll buy from now on. — Joe

These things are as soft and gentle as they come and they block the noise out very well. I highly recommend them[.] — Byron

They are the best ear plugs I’ve ever used — and I’ve used many over the years. These are the only ear plugs I will ever use in the future. — Rhoda

My darling husband snores like the dickens. With a timid and hopeful heart, I purchased these ear plugs online. The first night I used these, I slept like a rock. The product is fantastic; the plugs stay small long enough when you pinch them so you can get them in, and they cancel out noises very well. I’m so happy I got these – they’re saving my marriage! — YC, Seattle

Permalink Gear Review, Hot Deals 1 Comment »