From Sweden — SPUHR Unimount Scope Mount System
When a scope mounting system costs as much as a factory hunting rifle, it better be something special. At $410.00, the Spuhr Unimount Scope Mounting System is one expensive piece of kit. But if you shoot .338 Lapua Magnums or 50 BMGs, this mount may be worth the money. Made in Sweden, the aluminum Spuhr Unimount integrates “rings” into a +20.6 MOA (6 MIL) base with built-in bubble level. The matte-black-anodized Spuhr Unimount has some interesting design features. The clasping bolts are set at a 45° angle. Ring internal surfaces are grooved for enhanced “grip” (these are not threads — the surface is precision ground and smoothed so there are no sharp edges). Available in 30mm and 34mm diameter (and various heights), the Spuhr Unimount even comes with a scope indexing tool to help you align your scope correctly with the mount. Along with the standard Unimount shown in the photo, a cantilever-sytle Unimount is offered for AR-platform rifles and other guns requiring forward scope placement.
SPUHR Unimount Features
- Swedish-made machined aluminum one-piece scope mounts
- Rings are cut at 45 degrees instead of horizontal so turrets can be easily viewed from the rear and no bolt heads interfere with scope controls
- Rings are grooved on the interior to prevent slippage and to allow gluing
- Built-in, easy-to-view bubble level in rear of mount
- Available as a standard mount or cantilever
- Included scope indexing (alignment) tool
- Built-in 20.6 MOA (6 MIL) Elevation
Similar Posts:
- Unitized Scope Mount System from DNZ Products
- New Scope-Mounted Level and ADI Mount from Flatline Ops
- DedNutz One-Piece Scope Mounts
- Scope-Ring Alignment Tool for Hunting Rifles
- On the Level — Why You Need an Anti-Cant Device
Tags: MOA, Picatinny Rail, Rings, Scope base, Sinclair Int'l, Spuhr, Unimount
Looks like a very nice thought out set of rings and bases.
Might be handy to point out that Spuhr also manufactures ISMS (Ideal Scope Mounting System) direct fit mounts for Tikka, Sauer/SSG and Accuracy International – the latter works on rimfires too – and offer straight mounts aswell as tilted (various up to 13 MIL/44 MOA) in 30, 34, 35 and 36 mm.
Simply the best there is. Not only is everything but an egg cooker included, adding to that is a craftsmanship second to nothing on this planet and a mindblowing range of accessories to fit to the mount: from a simple backup/short range sight to a SIMRAD – Spuhr has you covered, and you could mount them securely almost anywhere you want with the sturdy conical interfaces the mount is littered with.
I might sound like a salesman and I am a friend of Håkan Spuhr himself, but that’s not why I’m writing this – it’s just that these really ARE some seriously good pieces of kit and I believe they have no equal. Eventhough I have to pay full retail just like you guys.
Some friend he is…..