High-Quality One-Piece Rest with Recoil-Reduction System

Do you have a favorite large-caliber rifle that sits in the safe because it’s just too painful to shoot? Perhaps you’re planning a big-game safari, and you need to comparison-test some ammo, but you dread the punishment you will take firing many dozens of rounds over the course of an afternoon. Well TargetShooting Inc. has a solution. Two new accessories are offered for TargetShooting’s model 1000LP one-piece shooting rest that tame the recoil of even the hardest-recoiling rifles. Up front, a 19.85-lb weight provides extra mass for the unit, keeping the 1000LP firmly planted. In the rear, an adjustable Recoil Pad Assembly soaks up recoil energy. The key component is a very thick Sorbothane pad that adjusts to the angle of the butt on your rifle.

With the recoil reduction system in place, we have tested the 1000LP with a variety of hard-hitting calibers: 50 BMG (with brake), .458 Lott, .338 Lapua Magnum, .375 H&H. It handled all these big boomers well, and the felt impact on the shoulder was significantly reduced. We won’t say you can shoot a .50 BMG “all day long” with this rig, but this set-up is definitely a shoulder-saver. If you are testing ammo with a hard-recoiling caliber, the 1000LP with recoil reduction allows you to fire more rounds without abusing your body, or developing a bad flinch. We also tested the 1000LP with a common hunting caliber — the venerable .30-06 — and the felt recoil was really quite mild. Honestly, you could shoot many dozens of rounds of .30-06 or .308 Win with this rig without having to take multiple “time-outs” (or see a chiropractor). By itself, the 1000LP one-piece Rifle Rest costs $699.95. The adjustable Recoil Pad Assembly sells for $349.95 extra. The low-profile, forward counter-weight unit costs $139.95. The 1000LP and all its accessories are precision-crafted with very high levels of fit and finish.

The weight of the rifle and the shape of the stock/chassis will affect how the gun behaves on recoil. Light rifles with narrow fore-ends tended to jump a bit out of the front bag. Heavier rifles with a beefier chassis would recoil more in a straight line. But no matter what the caliber (or stock type), the Sorbothane recoil pad soaked up the lion’s share of the recoil, dramatically reducing the shock (or jolt) you actually feel on your shoulder. By the laws of physics, the energy of the rifle’s recoil can’t magically disappear. However, when using this system, the smack on your shoulder is much diminished and the perceived recoil “hit” (on your body) is far less extreme.

Note: The 1000LP is designed to slide a bit when used with a big-caliber gun. If the rest did not move at all, this could cause problems with stocks or optics. On a concrete bench-top the rest might slide back 1/2″ to 3/4″ after firing a big-caliber round. After a couple shots we would reposition the rest. This was easily done by sliding the rest forward on the three legs (you do not have to lift up the entire rest between shots — just push it forward, while keeping the rear “superfoot” pad aligned under the rear adjuster).

Similar Posts:

• Roger Ahrens' One-Piece Rest
• Ransom Rifle Master ‘SL Mega Rest’ — Review Part One
• Experiment with Rifle Position on Rest and Bags for Best Accuracy
• Radical New Swallowtail Stock from SEB
• Experiment with Fore and Aft Rifle Position on Rest and Bag

Tags: 1000LP, 50 BMG, Lead Sled, Limb-Saver, One-Piece Rest, Recoil Pad, Recoil Reduction, Rifle Rest