Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









July 19th, 2014

Ty Cooper Offers Tips for Camp Perry Competitors

Creedmoor SportsTyrel Cooper of Creedmoor Sports will be competing at Camp Perry this summer. A past member of the USAMU, Cooper’s shooting resume includes five national championships (one each in 2008, 2011, 2012, and two in 2013). He is the current (2013) NRA National Long Range Champion, and reigning (2013) NRA National Service Rifle Champion. In this article, Cooper offers advice to other competitive shooters.

Below is a 2012 file photo of SSG Ty Cooper shooting a service rifle. Cooper won the 2013 NRA National High Power Rifle Long Range Championships with a final score of 1243-71X. In the Long Range Championships, Cooper used a Nesika-actioned bolt gun with long barrel chambered in 7mm SAUM.

Mental Preparation
by Tyrel Cooper
Getting focused mentally is an important part of preparation for Perry. I have shot two long range team matches and a no-sighter, 50-shot across-the-course match since last Perry — that’s it. So I expect to be a little rusty but at the same time I am preparing myself to win mentally. I am telling myself “I am the 2014 Nation Champion”. Now my goal hasn’t been to be the Service Rifle National Champion; no, my goal the last 4 years has been to be the overall National Champion and do it with a Service Rifle. Now I haven’t achieved that goal and with today’s rifles and calibers it might never happen. The purpose of this goal is to look past a service rifle and go after everyone.

Tyrel Cooper Creedmoor SportsIn 2011 I was chasing Sherri Gallagher, since then I have been chasing Brandon Green and last year almost got him. If I get beat by a Service Rifle I am going to make him or her work for it. So there is your peak into my mental process. I go for the top and if I am hanging with them then the Service Rifle National Championship will come, Kind of like how I shoot for X’s and Tens will come.

Now I understand everyone is at different levels. You have to figure out what your goals are and then lie to yourself that you’ve already achieved them. Here is a trick that I used back in 2008: When I was a kid just starting out, my Dad made me read several books on shooting. One of them being With Winning In Mind by Lanny Bassham. One of the things I remember from his book is that he would make notes and place them where he would see them often. They contained his goals or stated he was already a world champion. I took a page from his book and did the same thing.

I made 3×5 cards and wrote my personal best 500 and 800 aggregate scores and taped on the horn of my truck, above the radio in my truck, on my laptop and a few other places I would see them often. Every time I saw those I would tell myself that I average those scores and I would get used to seeing them. By doing this you are lying to yourself to overcome the mental blocks the subconscious mind lays out for you.

I went from my worst year in 2007 to winning my first National Championship in 2008. I kind of slacked off in 2009 because I had reached my goals and didn’t set new ones and it showed, so I had to find new goals and motivation which I did and that pushed me back to the top.

Long story short, this is a mental sport and you have to figure out what you need to do to perform at your highest levels and breaking through those mental road blocks. You have to figure out how to get yourself to relax and control your mind keeping calm when you are shooting a personal best, either standing or on the day.

Here is a tip from my mental process from shooting. First I shoot for Xs, I took the line from the movie The Patriot and applied it to my shooting, “Aim small, miss small” and it is true. If you accept wide shots then you will keep shooting wide shots.

Slow, Solid, Smooth, Center

Always focus on the positive and good shots, and what you did physically and mentally, when you shot them. When I am nervous and need to calm myself down I tell myself: slow, solid, smooth, center.

Slow
I want my movement to be slow… I can shoot tens and Xs all day with slow movement.

Solid
Solid like a rock, a rock doesn’t move and that’s how I want my positions. By saying solid it reminds me to go through my little checks to make sure I am doing what I need to do make that happen.

Smooth
Smooth — that is my trigger word for smooth movement. You don’t want fast choppy movement but slow and smooth. This also reminds me to be smooth on the trigger. You can be smooth-fast or you can be smooth-slow but you have to be smooth and most people aren’t when they think they are. Just before leaving the USAMU, I walked up and down the line of five shooters during a rapid fire string and only one of them was smooth with their trigger control. It’s the second most important thing when it comes to shooting.

Center
This reminds me that I want my shots in the middle. It is just a positive reinforcement of where I want my shots to go. I shoot a reverse flat tire so it also kind of reminds me as to what I am looking for.

Tyrel Cooper Creedmoor Sports

Organizing Your Gear
[This year] I have all new gear, a new place, and I am creating a new system. Coming from the Army Marksmanship Unit, I had years to develop and refine my system from my daily routines, to my gear, and to my set-up process. I wanted to share with you a little bit of what I am going through right now.

I went and shot a match at [Fort] Benning a few weekends ago and I had more issues with my gear and system than I did with the act of shooting, it was frustrating and I didn’t like it one bit. So in my preparation for Perry, I took all of my gear apart in my living room and started over. I went through as if I was going to shoot a match; placing gear where I wanted it in or on my Creedmoor Range Cart. There is a lot to be said for having a system and not having to worry about where your gear is or isn’t. Once I got all of my gear in place, I put my new Ron Brown Sling on my rifle and dry fired a little bit. Worked on sitting and prone to figure out what sling notches I would need to use and how my new glove/mitt combination would work. My gear is set and ready to go in my living room, and even though I am not leaving until Sunday, I am setting all the shooting gear and equipment aside to make sure I have everything I need.

If you don’t have a system with your gear where everything has its place or certain spot, then I would suggest you start working on one. When it comes to a match, you don’t want to be searching for something or worrying if it was forgotten at home.

If you have a good system, it allows you to focus on the important things such as how to get your mind in your little bubble, working on what you need to think about to shoot Xs, and thinking about whatever reminders you need to think about to get you to perform at your highest level.

My reminder that I ask myself when I am setting up my gear either in my living room or getting ready to head down range is this: Scope, mat, rifle, stool, jacket, sweatshirt, sling, glove, ammo, mags, data book, and ear plugs. This is the most important stuff that I can’t shoot a match without. I always have extra pens, flags and small stuff in my stool.

Story Tip from EdLongrange. We welcome reader submissions.
Permalink Competition, Shooting Skills No Comments »
July 19th, 2014

Tips on Case-Trimming from PMA Tool

The folks at PMA Tool, makers of arbor presses, neck-turning tools, and other case-prep tools, offer some good advice about case trimming on the PMA Tool Blog. Here we reprint a PMA blog post that explains case trimming basics and helps you choose the right case-trimming tool for your needs.

Case Trimming Basics
Trimming the cartridge case to the proper length is a crucial step in case preparation that should not be overlooked or underestimated. The cartridge case or the rifle can be damaged, or even worse you get badly injured. In most instances cases should be trimmed after firing and sizing. Trimming new brass is necessary for a lot of wildcats and can be beneficial in some instances, but by and large, trimming new brass is not necessary for most situations (unless you are neck-turning). Cases should be trimmed after you have sized the case, because the expander ball on the decapping pin can (and will) stretch the neck. Those of us who neck size should get into the habit of trimming after sizing as well. This is a good rule of thumb to go by, and hopefully it will keep you safe during the reloading and shooting process.

There are so many case trimmers out there that work, deciding which one is right for you can be confusing. Even though I have trimmed thousands of cases, using about every method possible, I can’t answer the question of what case trimmer is right for you because of all the variables that may be involved. I can, however shed some light on the subject.

Wilson Micrometer Case Trimmer

The two most popular designs of trimmers either index (1) off the base or the head of the case, (2) off the shoulder or datum line of the case. There are pros and cons to each and it all depends on what you are willing to live with.

Indexing off the Base (Case Head)
Let’s talk about the first one I have listed, indexing off the base, or the head of the case. The pros to this method are that you can achieve a very accurate over all length and that is after all, what it is all about. The cons to this method are that you can get some variation doing it this way. Let me explain, the base is not always square to the body or can be damaged during firing especially if it is fired through a military style rifle with a very aggressive ejector. These cases should be discarded, but sometimes they can be overlooked. This condition can lead to an over all length that is incorrect. The case head being out of square will be corrected upon firing, however that case will wind up being shorter than the rest of your cases, possibly creating a difference in the neck tension on the bullet. The more you can do to eliminate variables in your reloads the better off you are going to be. This method can also be very slow, and if the user gets careless the result will be a inconsistent over all length.

Forster Case Trimmer

Indexing off the Shoulder (Datum Line)
The second method I mentioned, trimming off the shoulder or the datum line of the case, has its pros as well. I have found this to be the quickest of the methods and very accurate as well. After the case has been sized through the die the dimensions (particularly the headspace) of the cases are usually very uniform and exact, this allows the case to be trimmed by indexing off the shoulder. This method can be done very quickly, by hand, or by powering either the case, or the trimmer. You also don’t have to worry about the case heads being out of square with the body using this method. Generally the trimming time is cut in half, and this leads to greater focus on the job, without becoming careless. [Editor’s Note: The World’s Finest Trimmer (WFT) is one power device that indexes off the shoulder datum. It works fast and is very precise. The new WFT 2 Model with interchangeable trim chambers works with multiple cartridge types.]

Little Crow WFT

Summary
The choice is yours to make. I hope that this was some help to you, whether you are looking for your first trimmer or looking to replace the trimmer you have. Just remember to always put safety first and accuracy second, and you will start making little bug holes in no time.

Story Tip by EdLongrange. User Submissions are welcome.
Permalink Bullets, Brass, Ammo, Reloading 5 Comments »