Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









July 26th, 2014

SCATT MX-02 for High Power Shooters

The SCATT MX-02 is a revolutionary electronic shooter training system that is capable of operating outdoors with live, centerfire ammunition, at distances from 25 yards to 600 yards. Tony Chow recently tested this product, as fitted to his AR-15 Service Rifle. Tony concludes this is a very useful tool that can help High Power competitors refine their technique and thereby shoot higher scores. CLICK HERE for Full 3000-word Review.

SCATT MX-02 training digital camera sensor target

How the SCATT MX-02 Works
The SCATT sensor mounted on the end of the barrel has a digital camera that recognizes the black bullseye in the target, even in broad daylight outdoors. Using the bullseye as a reference, the SCATT software tracks the movement of the muzzle relative to the center of the target. The unit can plot these movements as a continuous trace, which appears on a monitor as a squiggly, colored line. By sensing the exact moment of shot release, the SCATT can also interpolate relative shot placement (for a single shot or series of shots) — but this is not the same as an electronic target which actually records the exact shot impact location on the target.

SCATT MX-02 training digital camera sensor target

Back in January, we reviewed this product from the perspective of a smallbore competitive shooter. (Read Previous Review.) Recently, we had the chance to test SCATT MX-02 again, this time on an AR-15 service rifle, in order to assess its implications for the High Power competition community.

We put the MX-02 through its paces in all three High Power shooting positions and in various environmental conditions. We wanted to find out whether the system can reliably operate in the harsher outdoor settings and withstand the recoil of a centerfire rifle. We also wanted to assess whether it provides added values for High Power shooters over older generation of electronic trainers such as SCATT’s own venerable WS-01.

On both counts, we came away impressed. The SCATT MX-02 stood up to centerfire recoil after hundreds of shots and was able to consistently recognize the often less-than-pristine High Power target faces. Both indoors and outdoors, the MX-02 acts as SCATT should and dutifully captures useful aiming traces and other data. It does that even during outdoor live-fire sessions, where shooter performance often differs from indoor dry-firing due to the sensation of recoil and environmental factors.

SCATT Rapid Fire Results (paper target on left, screen on right).
Scatt MX-02 shooting trainer camera

In particular, SCATT MX-02 allows shooters to effectively troubleshoot and improve their rapid-fire performance, a service that no previous-generation trainers are capable of providing. The unit isn’t perfect — the SCATT MX-02 had some mounting issues with small-diameter barrels, but a cardboard shim provided a quick and effective solution.

CLICK HERE for Full SCATT MX-02 Review.

Overall, performance was impressive. In most realistic training conditions that High Power shooters experience, the system performed well. We can certainly recommend SCATT MX-02 as an extremely valuable tool for High Power competitors looking to take their performance to the next level.

Test Drive the MX-02 at Camp Perry
SCATT electronic training systems are currently on display at the NRA National Championships in Camp Perry, Ohio. Interested shooters can try out SCATT at Champion Shooters on Commercial Row, Building #1023B.

For more information or to order SCATT products, including the new MX-02, visit ScattUSA.com or call toll-free: 1-855-57-SCATT (72288).

Permalink Gear Review, New Product No Comments »
July 26th, 2014

Jerry Miculek Shoots Original, Full-Auto AR-10 from the Fifties

Today, AR-platform rifles are hugely popular. Dozens of manufacturers sell AR-type rifles, in a wide variety of configurations and calibers. But before there were M16s and AR-15s, ArmaLite produced a 7.62×51 caliber rifle, the AR-10. Invented by Eugene (‘Gene’) Stoner for the Armalite company, this is the father of all of today’s AR-platform rifles.

If you’re curious about the AR-10, in this video, Jerry Miculek puts an original 1957-vintage AR-10 through its paces on the range. This extremely rare, early-production rifle was provided by Mr. Reed Knight and the Institute of Military Technology. (The gun in the video was actually produced in the Netherlands under license, see video at 4:40.) This AR-10 is the direct ancestor of the AR-15, M16, and many of the modern sporting rifles that we use today.

The AR-10 was slim and light, weighing in at around 7 pounds. Some folks might argue that the original “old-school” AR10 is actually better that some of today’s heavy, gadget-laden ARs. The AR-10’s charging “lever” was under the carry handle — that made it easier to manipulate with the gun raised in a firing position.

AR-10 Armalite Jerry Miculek

You’ll notice there is no “forward assist”. Inventor Gene Stoner did not believe a separate “bolt-pusher” was necessary. The forward assist was added to solve problems encountered in Viet Nam. Some critics say the forward assist “only takes a small problem and makes it a big problem.” For today’s competition ARs (that are never dragged through the mud) the forward assist probably is superfluous. It is rarely if ever needed.

AR-10 Armalite Jerry Miculek

Note also that the handguards are fairly slim and tapered. Today, six decades after the first AR-10 prototypes, we are now seeing these kind of slim handguards (made from aluminum or lightweight composites) used on “full race” ARs campaigned in 3-gun competition.

AR-10 Armalite Jerry Miculek

History of the AR-10
The AR-10 is a 7.62 mm battle rifle developed by Eugene Stoner in the late 1950s at ArmaLite, then a division of the Fairchild Aircraft Corporation. When first introduced in 1956, the AR-10 used an innovative straight-line barrel/stock design with phenolic composite and forged alloy parts resulting in a small arm significantly easier to control in automatic fire and over one pound lighter than other infantry rifles of the day. Over its production life, the original AR-10 was built in relatively small numbers, with fewer than 9,900 rifles assembled.

In 1957, the basic AR-10 design was substantially modified by ArmaLite to accommodate the .223 Remington cartridge, and given the designation AR-15. ArmaLite licensed the AR-10 and AR-15 designs to Colt Firearms. The AR-15 eventually became the M16 rifle.

AR-10 photos from Arms Izarra, a Spanish company specializing in de-militarized, collectible firearms. Interestingly, this particular AR-10 was produced in the Netherlands under license.

Permalink - Videos, Gunsmithing 1 Comment »