|
|
January 6th, 2015
What can happen when the bottom-most primer in a primer feed tube goes off? A big bang, that’s what. Some or all of the primers in the vertical feeding tube can go off in a chain detonation. That’s exactly what happened to Dustin Ellermann, Top Shot Season 3 Champion. Scary experience, but thankfully Dustin was not injured. He writes: “Super thankful that I was wearing my Wiley X eye protection this weekend when I was reloading some .223 rounds. My press detonated nearly 100 small rifle primers. Shown here is the magazine feed tube. Not fun but it could have been much worse. Stay safe!”
When working with progressive reloading presses, you should definitely wear eye protection. Dustin’s chain detonation experience proves that — without a doubt. Remember you only have one set of eyes!
APS Strips — Alternative to Primer Tubes
 When you stack a column of primers in a single metal tube, you’re asking for trouble. As Dustin Ellermann learned, when one primer fires, the entire column can follow suit in a chain detonation. Thankfully, you do have options when it comes to primer feeding on a progressive press. RCBS developed an innovative primer system for its Pro-2000 progressive press. Instead of being stored in a vertical tube, primers are placed in flat, plastic “APS” strips, with a ring of plastic separating each primer. Moving horizontally, primers are never stacked, so the chance of a chain detonation is reduced dramatically. The re-usable APS strips are color-coded for different primer types. You can buy CCI “pre-loaded” primer strips, or you can insert any brand of primers into strips using an RCBS strip-loader tool.
RCBS Pro-2000 with APS Strip Priming System
AccurateShooter.com Editor Uses Strip Primers
This Editor owns an RCBS Pro-2000 progressive press (manual-indexing version). The RCBS strip-priming system was one key reason I selected the RCBS Pro-2000 over similar-priced progressives from Dillon and Hornady. I believe the strip primer system is safer, more positive, and easier to use. Before I purchased my RCBS progressive, I “road-tested” the competition. I loaded hundreds of rounds on each of four different progressives: Dillon 550B, Dillon 650, Hornady Lock-N-Load, and RCBS 2000. I was concerned about the primer feed tubes on the Dillons, and I found the RCBS rotary powder measure was much more precise (and easier to adjust) than the sliding bar system on the Dillon machines. The RCBS priming system was definitely more fool-proof than the system on the Hornady press (a first-generation L-N-L that had issues with primer feeding). After “test-driving” blue, red, and green brand progressives extensively, I settled on the RCBS Pro-2000. A decade later, I still think I made the right choice. I like the APS strips for big jobs, and I can also use them in the RCBS hand-priming tool (shown below). With the strips, its easy to prime 20 or 40 cases at a time, and then switch to another type of primer for comparison testing.
Share the post "Chain Fire! What Happens When a Primer Column Detonates"
January 6th, 2015
 It’s much easier to see bullet holes “in the white” than in the black center of a High Power or F-Class Target. That’s why some shooters use “negative” black-to-white targets for practice sessions. Also, even those who compete at 800-1000 yards find it useful to practice at 300 yards. At that shorter distance, you can, on most days, see bullet holes with a good spotting scope. (Forget trying to see bullet holes at 1000 yards with any spotting scope, no matter how expensive).
The only problem with practicing at 300 yards is finding a correctly “shrunken” version of the target actually used in long range competition. Well guys, you’re in luck. One of our Forum members, Sleepygator, has produced “reduced-distance” targets (with black ring-lines on white background) for practice use at 300 yards. Only the center 10 and X rings are black, so you can see bullet holes easily “in the white” on most of the target (and this uses less ink when printing). There is an official reduced-distanced standard for 300-yard F-Class matches. This utilizes the NRA No. MR-63FC – F-Class Target Center which is pasted over the MR-63 target. It provides a 1.42″ X-Ring, 2.85″ 10-Ring, and 5.85″ Nine-Ring. (The dimensions of F-Class targets are found in the NRA High Power Rules, Sec. 22, part 4.)
CLICK HERE to Download F-Class 300-yard Target Centers (.Zip archive with three targets)
To duplicate the 300-yard target, Forum member SleepyGator has prepared a printable version of the MR-63FC Target Center, along with a pair of training targets with two bulls and five bulls. The two-bull and five-bull targets mirror the scoring rings on the MR-63FC, but they display only the innermost three rings and two rings respectively. All three targets are Adobe Acrobat files that can be easily printed. You may need to adjust the scale (sizing) on your printer to get the dimensions exactly correct. As noted above, when printed, the 10-Ring on all three targets should measure 2.85″. This should provide some handy practice targets you can use between matches. Thanks to SleepyGator for providing these targets. You can download all three as a .Zip archive. After downloading the .Zip file, just click on the .Zip archive to extract the individual targets.
Share the post "The Eyes Have It — Reduced 300-Yard F-Class Targets"
January 6th, 2015
 Gun Binders for Safes and More
Here’s a new way to store handguns in your safe — no racks required. These handy Multi-Gun binders hold up to three handguns (two regular size and one compact), along with magazines. Stack the binders vertically or horizontally in your safe. And at around 12” tall, they’ll easily fit on most gun safe shelves. Customizable I.D. sleeves on the binder spines allow you to identify the contents. That way its easy to locate the gun you want quickly. You don’t have to sort through unmarked bags or boxes.
Use Binders for Handgun Transport Also
Binder exteriors are tough, ballistic polyester. Soft interior pockets cushion and protect your pistols. Heavy-duty, lockable zippers run around the binder, securing all the contents. With their lockable zippers, these binders can do double-duty as discrete gun cases for transport to the range.
Important Long-Term Storage Tip
The polyesters used in soft gun cases can retain moisture. We recommend you treat your handguns with an anti-corrosion product such as Eezox or Corrosion-X before putting them in these binders for extended storage. Also we specifically caution against storing handguns in foam-lined plastic boxes, such as the small Doskocil cases. These can be rust magnets.
Share the post "NEW Multi-Gun Binders for Handgun Storage and Transport"
January 5th, 2015
This week’s episode of Shooting USA TV, the first of the new year, is definitely worth watching. The lead story focuses on the 35th Annual Bianchi Cup — the richest and most prestigious match in the handgun shooting sports. Competitors shoot four stages over a three-day period, and everyone aims for that perfect score: 1,920. Watch this episode on Wednesday, January 7, 2015 to see the world’s best handgunners in action.
Photo courtesy NRABlog.com
The Legendary Lee Enfield
This week, Shooting USA also features the Lee Enfield MK III, also known as the SMLE for “Short Magazine Lee Enfield”. Introduced in 1907, the SMLE was the primary British infantry weapon during WWI. The Lee Enfield’s speed of cycling, versatility, and reliability made it one of the great 20th-Century battle rifles. “I’ve never read a disparaging word by a WWI British soldier against his Enfield,” says Firearms Historian Garry James. “His government [gave] him a really good firearm.”
Julie Golob Talks About Carry Handguns
In the Pro Tip segment of the January 7th broadcast, Smith & Wesson Pro shooter Julie Golob offers advice for first-time gun buyers. Julie reviews various options among revolvers and semi-automatic pistols. She discusses factors to consider: weight, balance, firepower, ease of use and concealability.
Share the post "Shooting USA Worth Watching This Week"
January 5th, 2015
More guns, fewer fatal accidents — that’s the “take-away” from a report recently published by the National Shorting Sports Foundation (NSSF). We’re pleased to see that efforts to increase firearms safety are working. Even though the ranks of gun-owners have grown dramatically, the rate of unintentional firearms fatalities (per 100,000 persons) has dropped to an all-time low.
There has been a huge decrease in accidental gun-related fatalities over the last century (measured as a percentage of the population). NSSF reports: “The 2012 Center for Disease Control and Prevention WISQARS accidental fatality data shows the lowest number of unintentional firearm-related fatalities per year ever reported (going back to 1903)”. As Dean Weingarten of Gun Watch explains: “The accidental fatal firearm rate has dropped by 94% since we started keeping statistics, even though the total number of firearms per capita has likely at least doubled. You need to look at the rates — accidental firearm fatalities per 100,000 population — to see the stunning reduction in the last century.”
Only 0.4% of unintentional fatalities now involve firearms. The biggest killer, to our surprise, is poisoning, which accounts for 28.4% of accidental deaths. Motor vehicles, not unexpectedly, rank second at 27.3% (see chart below). Even suffocation, at 4.9%, accounts for 12 times more unintentional deaths than firearms.
GET NSSF REPORT HERE: DOWNLOAD NSSF Firearms-related Industry Safety Report.
Share the post "Good News — Far Fewer Fatal Gun Accidents Than Ever"
January 4th, 2015
You’ve probably heard of Allliant Reloder 22 powder, but how about Reloder 23? Or Reloder 26? These two new European-produced Reloder propellants were introduced in 2014. Most folks haven’t seen these Reloder powders because it took quite a while for the first shipments of RL 23 and RL 26 to arrive in the USA. We’re pleased to announce that these two new propellants are now in the stateside distribution chain. You should start to see these propellants on dealers’ shelves soon. ATK tells us: “We introduced [Reloder 23 and Reloder 26] last spring at the NRA convention, but… we were unable to ship them into distribution due to delays obtaining the required DOT classifications. We have finally received them (after 7 1/2 months) so we began shipping late fall.”
What are the characteristics of RL 23 and RL 26? That question was answered recently by Paul Furrier who works for ATK, the parent company of Alliant Powders. Posting in our Shooters’ Forum, Paul writes:
“Let me provide some factual info about these products. Some of the stuff that gets propagated is not correct. Reloder 23 is produced by our Swedish partner Bofors, and Reloder 26 is produced in Switzerland by our extremely capable partner Nitrochemie. I have seen it stated that they are both made by Bofors, so that is incorrect.
I have also noticed people are equating Reloder 23 to Reloder 22, and Reloder 26 to Reloder 25. Both of those statements are definitely incorrect. We do state that the performance of Reloder 23 is similar to Reloder 22, and it is, in general burn speed terms, but they are most certainly not the same. We have worked quite a lot of recipes for Reloder 23, and they are not the same as Reloder 22. Reloder 26 is definitely slower burning than Reloder 25, so there shouldn’t be any confusion there either.”
Furrier says that RL 23 is NOT sensitive to temperature shifts: “Reloder 23 was developed to bring a truly temp-stable powder to the Reloder 22 burn-speed range using Bofors new process technology. This is the second product developed for us with this TZ® process, the first being AR-Comp™. We see terrific efficiencies, SDs, accuracy and flat temp response from these powders. Please try them, I think you will be impressed.”
Speed and More Speed with RL 26
Think of Reloder 26 as a high-velocity powder for big cartridges. Furrier explains: “Reloder 26 is produced with Nitrochemie’s latest generation EI® process technology. This is the same impregnation coating process used to produce Reloder 17, Reloder 33, and Reloder 50 for us, and it is fantastic. The “so what” on Reloder 26 is great ballistic efficiency, high bulk density so you can get more of the slow powder into the case to harness the energy, and decent, predictable extreme temp response. Reloder 26 is not as flat at temps as the TZ or Australian materials, but it is very manageable, usually in the 0.5 fps/°F range (depending on the application). Just as important, the pressure increases at hot are very manageable. We are using quite a bit of this powder in our Federal factory ammo due to the fantastic ballistics and accuracy.
Both of these new Reloder powders contain decoppering agent to help reduce coppering up your barrels, but this is nothing new for us. Bofors began adding decoppering agent to our Reloder rifle powders in the 2002 timeframe, and all our Swiss Reloders except 17 contain their proprietary additive. (We may include it in 17 at some point also, but right now we like it just the way it is.) Sorry we didn’t have a snappy name figured for the decoppering agents, we just did it.
Both of these new Reloder powders are also produced to the current highest level of ‘green’ technology. Actually, all of our Alliant rifle, pistol and shotshell reloading powders meet the current (tough) European requirements for elimination of nasty ingredients. They do not contain any dinitrotoluene or dibutylphthalate, which are a couple of the nasties that are commonly used in smokeless powders.
Thank you for your interest in our new powders.” — Paul Furrier, ATK
Reloder 23
Like AR-Comp™, new Reloder 23 from Alliant Powder performs consistently across temperature extremes. Its sophisticated TZ® technology manipulates the response of the material and resists the natural tendency to generate more pressure at higher temperatures and less pressure at lower temperatures. Reloder 23 is perfect for long-range target shooters seeking performance similar to Reloder 22 with world-class temperature stability.
Features & Benefits:
TZ technology provides exceptionally consistent velocities across temp extremes
Contains proprietary de-coppering additive
Ideal for long-range target shooting
Excellent lot-to-lot consistency
Formulation contains no DNT or DPB
Made in Sweden for Alliant Powder |
Reloder 26
Reloder 26 offer high velocities in large magnum cases. Achieve awesome ballistics with new Reloder 26 from Alliant Powder. The propellant’s burn speed falls between that of Reloder 22 and Reloder 33, and it incorporates EI® technology to produce extremely high velocities in magnum cartridges. Reloder 26 has a high bulk density that allows larger powder charges, and it provides a consistent, controlled response to temperature changes.
Features & Benefits:
EI technology produces extremely high velocities in magnum cartridges
Contains proprietary de-coppering additive
Controlled temperature stability
Excellent lot-to-lot consistency
Formulation contains no DNT or DBP
Made in Switzerland for Alliant Powder |
Share the post "New, Advanced Alliant Powders: Reloder 23 and Reloder 26"
January 4th, 2015
The 2014 F-Class National Championships were held in Phoenix this past October. It was a well-attended match with nearly 170 competitors from around the nation. In a tight battle, James Crofts (1574-59X) edged past champion Derek Rodgers (1573-65X) by a single point in the F-TR division. In F-Open, Emil Kovan (1587-83X) shot well to beat Danny Biggs (1585-83X) by a two-point margin. Both Kovan and Biggs racked up 83 Xs — that’s mighty impressive shooting. Overall, conditions were generally good (if hot), and many new records were set. The course of fire was 160 shots, all at 1000 yards.
An excellent, detailed day-by-day report on the F-Class Nationals appears in the January edition of Shooting Sports USA, just released. Prepared by past National F-Open Champion Larry Bartholome (aka “LBart” in our Forum), this article provides unique insights by one of the leading competitors in the game. Larry may be a senior citizen but he can still shoot. In fact, Larry observes that age is no barrier to success in the F-Open division: “In the ten-year history of F-Class, the F-Open discipline has been won four times by senior or grand senior shooters. John Brewer was 73 when he won in 2004. In 2007 Bob Bock won as a 65-year-old senior in Raton, NM. Jim Murphy was a 65-year-old senior when he won in lodie, WI. Finally, Larry Bartholome won in 2013 at Raton at the age of 73, even though he felt like 103. All of these senior/grand senior champions are members of Team Berger, and still shoot.”
Another highlight of the 2014 F-Class Nationals was the performance of Team Long Shots. Team members pleased the crowd by shooting in their Halloween costumes on October 31st. The colorful costumes (Snow White and the four dwarfs) didn’t seem to hurt their performance. In fact it may have brought the Long Shots some luck. All four marksmen went through the match without dropping a single point. This gave Team Longshots an 800-42X score at the end of the day to secure the team win, setting a new team record in the process. Larry Bartholome writes: “This is the first-ever 800-point team score in the history of F-Class.”
You can read the FREE eZine version of Shooting Sports USA online. Along with Larry’s F-Class article, this January edition includes coverage of various state and regional shooting championships, plus a field test of the new Match-Grade .30-06 Springfield Ammunition from Creedmoor Sports. This is excellent stuff, produced with premium Lapua brass and Lapua Scenar bullets. Tester Art Merrill reported this ammo was very straight, and demonstrated excellent accuracy on target. If you shoot Garand matches, you may want to get your hands on this high-quality ammo. See the test results below.
New Creedmoor Sports .30-06 Ammo Reviewed:
Share the post "F-Class Nationals Featured in January Shooting Sports USA eZine"
January 3rd, 2015
Many of us would like to outfit one (or more) of our rifles with a suppressor, but the cost and red tape involved can be daunting. Some states prohibit private individuals from owning suppressors. However, most U.S. states DO allow suppressor ownership. That’s the good news. On the other hand, suppressors are not inexpensive and the process of obtaining governmental approval is time-consuming. Then there is the cost of the tax stamp itself — $200.00 for each silencer you own.
Nonetheless, suppressors are fun, and they serve an important function. Along with protecting your hearing, suppressors can tame recoil and dramatically reduce muzzle flash. Noise reduction of up to 35 decibels is possible with a .223 Rem. When shooting any firearm, you should still wear hearing protection of course, but suppressors can help reduce the risk of permanent hearing damage.
Benefits of a Suppressor — Why Suppressors Make Sense:
Is It Legal For You To Own A Silencer?
The vast majority of the 50 states permit citizens to own silencers. Currently, the following states allow private ownership of suppressors: AL, AR, AK, AZ, CO, CT, FL, GA, ID, IN, KS, KY, LA, ME, MD, MI, MO, MS, MT, ND, NE, NV, NH, NM, NC, OH, OK, OR, PA, SC, SD, TN, TX, UT, VA, WA, WI, WV, and WY. Even if you live in one of these states, you should verify that owning a suppressor is legal in your city/county.
If you live in a state where suppressor ownership is legal, and you can legally own a firearm, then you can buy a suppressor. However, you need to obtain ATF permission and pay a tax.
If you are interested in getting a suppressor, thankfully there is a source that can help you select the right product, and fill out all the paperwork required. The Silencer Shop specializes in sound moderators for pistols, rimfire rifles, centerfire rifles, and yes, even shotguns. The Silencer Shop maintains a large selection of suppressors for sale, and the shop can guide you through the NFA permitting process from start to finish.
How to Buy a Silencer, Part One:
Based on hundreds of successful applications for its customers, the Silencer Shop has streamlined the National Firearms Act (NFA) Registration process for suppressor ownership. Having submitted more silencer NFA Forms than any other dealer, these guys know the ropes: “We’re at the leading edge of making the NFA process as fast and easy as possible. From our famous ‘Black Packets’ to the latest electronic submissions and Silencer Shop Direct, we have a history of innovation in this area”. The Silencer Shop also works with knowledgeable attorneys who can help you set up an NFA trust to own suppressors and other NFA items. CLICK HERE to Learn How to Register a Suppressor to a Trust.
Share the post "Silencer Shop Makes It Easy to Acquire and Register Suppressors"
January 2nd, 2015
Nightforce is introducing two all-new First Focal Plane (F1™) scopes at SHOT Show 2015 in Las Vegas. With abundant elevation adjustment, these new F1 optics should be popular with long-range shooters. Nightforce will offer these F1 scopes with either MOA-based 1/4-minute clicks or a Mil-based 0.1 (one-tenth) Mil-Radian adjustments. Reticle choices are: MOAR™, Mil-R™, Horus H59, and TReMoR3.
Our readers will probably be most interested in the new ATACR™ 5-25x56mm F1™ riflescope. Nightforce tells us that “We have been bombarded with requests for this specific model. We wanted to design and pack this model with so many features that it would be the true heavyweight champion in the field.” With a beefy 34mm maintube, the new 5-25x56mm F1 boasts an impressive 30 MOA (or 12 Mil-Rads) of elevation per revolution, with 120 MOA (or 35 mils) of total elevation adjustment. That’s a lot. Tactical shooters should appreciate the yards/meters markings on the side parallax knob (yards for MOA scopes, meters for Milrad scopes). You can actually “dial the distance” with the marked parallax knob. That should speed up focus adjustments during target transitions. For low-light applications, the new 5-25x56mm F1’s DigIllum™ reticle illumination system provides precise brightness control.
Nightforce believes the 5-25x56mm F1 will be a hit with long-range and tactical marksmen, even though MSRP is a hefty $2900.00: “We anticipate that some of the weapon applications for this model will include long-range and ultra-long-range precision tactical rifles, unique long-range hunting rifles, and many of the purpose-built magnum AR platforms.”
New 4-16x42mm F1 Replaces current 3.5-15x50mm NXS F1
The ATACR™ 4-16x42mm F1 will replace the previous NXS 3.5-15x50mm Nightforce. Like the 5-25X F1, the new 4-16X F1 offers 30 MOA (or 12 Mil-Rads) per revolution of the elevation turret. This scope also features a new ZeroHold™ zero-stop which uses a simple press-button design. According to Nightforce, the low-profile ZeroHold offers a positive zero-stop that is “automatically re-indexed as you return to your zero”. As with the ATACR 5-25x56mm F1 model above, the ATACR 4-16x42mm F1 features DigIllum reticle illumination control. MSRP for the 4-16x42mm ATACR F1 is $2400.00.
Share the post "New F1 First Focal Plane Scopes from NightForce"
January 2nd, 2015
Writing for the ELEY Bulletin, USA Olympic Gold Medalist Matt Emmons provides rock solid advice for anyone involved in competitive shooting. Matt talks about dealing with pressure, and how to maintain concentration and focus. Matt says two keys to maintaining focus are practice and imagination….
Sports Shooting Psychology – Concentration
Concentration – staying focused in stressful competition situations
There are books… totally devoted to concentration, so I what I am about to write is only my opinion and take on the subject matter. There are so many aspects to the game of shooting, whether it be rifle, pistol, or shotgun. At the same time, one of the constants is concentration. Concentration is one of the things that allows you to be your best and keeps you in the “zone” when you are performing extremely well. It’s also a piece of the puzzle that has often disappeared when things go awry.
 So how do you concentrate when the pressure is on? The exact recipe will be slightly different for different people, of course. Two important things for anyone, however, are practice and a great imagination! If you never practice focusing intently on anything, or especially during training, you will never learn to do it when you really want to. You must practice every situation that could occur during an important competition and practice what you will do so that you can continue to be your best. That means imagining and practising what you will do in the biggest match of your life when things are going incredibly well. How will you react? How will you work with it so that you continue to perform beautifully?
What will you do if you are in that same biggest match of your life and something goes wrong? How will you keep your poise, get back on track, and do what you’re capable of to achieve your goal? The answer depends on you. A great shooter needs to have a great imagination and needs to be able to look deep inside themselves to know how they might react in every different situation. If something doesn’t feel comfortable or there is nervousness, that means the athlete needs to work on preparing for it in training so that if the situation happens in a competition, there will be no lapse in concentration. There is a plan and it has be rehearsed so that it flows effortlessly.
I certainly can’t recommend any “quick fixes” to help anyone concentrate better. That doesn’t really exist. A couple things that always help in stressful situations, however, are these:
– Breathe!! Stop and take a few slow, deep breaths to slow the heart down. You’ll be surprised how much this can help.
– Keep your thoughts rational and focused on things you can control. Any worries about “what if’s” or things out of your control are completely useless and will only take your concentration off of what you’re trying to do.
– Stay in the moment! Good or bad, the past is done! You cannot change it. If the past was great, enjoy it for a moment and move on to now. If it was bad, learn what you can from it and move forward. The future is what you create. Every future moment is this current moment. Enjoy and make the best of this current moment and the future moments will come by themselves. Make the current shot the best shot you can possibly make, enjoy it then repeat on the next one.
– Picture what you want to see happen. Imagine a short video of the “your perfect shot” and play it over and over again in your head. Keep it short, keep it simple.
– Lastly, no matter whether it’s your club championship or the Olympic Games, remember why you are shooting. Hopefully you are in that particular moment because you love the game. At the heart, that is why we play any game – because we enjoy it! Never forget that no matter how stressful any competition might be. Aligning the sights and making a great shot is a whole lot of fun to do wherever and whenever you do it.
Good luck and great shooting — Matt Emmons
About ELEY Ammunition
 Established in 1828, ELEY now produces some of the most consistently accurate .22 LR rimfire ammunition in the world. Countless championship medals have been earned with ELEY rimfire ammo, and most current smallbore ISSF world records were set with ELEY ammo. ELEY maintains a large production and testing facility in Birmingham, West Midlands, in the UK. ELEY employs a team of specialists (including many Six Sigma qualified engineers) with extensive knowledge of internal and external ballistics, powder dynamics, and advanced production methods. ELEY has always been at the forefront of the ammunition industry, pushing technological boundaries which have resulted in patented new methodologies and techniques.
Share the post "Concentration — Matt Emmons Explains How to Stay Focused"
January 2nd, 2015
Scheduled to open in spring 2015, the CMP’s new Talladega Marksmanship Park will be one of the largest, most elaborate public shooting ranges in the nation. State-of-the-art electronic targets will be utilized for both competition and practice, with groups and scoring viewable via electronic monitors. Sporting Clays, Trap, and 5-Stand venues will offer fully automated clay target-launching systems utlizing swipe card technology. For more info, visit the Talladega Marksmanship Park website.
CMP Talladega Marksmanship Park
Plans were approved in March 2012 by the CMP Board of Directors for a 500-acre marksmanship park located two miles from the Talladega International Motor Speedway in Talladega County, Alabama. The new CMP Talladega Marksmanship Park will feature a 600-yard rifle range with 50 electronic firing points, 100 yard multi-purpose range with 40 electronic firing points, 50 yard pistol range with 25 electronic firing points, 50 foot pistol qualification range, 15 action pistol bays, trap field with 5 stand overlay with automated trap machines, and 15 station sporting clays field with automated trap machines. The facility address is: 4387 Turner Mill Road, Talladega, Alabama.
Park Usage Fees:
| Range (Centerfire/Rimfire)
|
1/2 Day (4 hr) Adult
|
1/2 Day Junior (age 10-17)
|
All Day (8 hr) Adult
|
All Day Junior (age 10-17)
|
| 100-yard Electronic Targets |
$15 |
$8 |
$25 |
$13 |
| 50-yard Electronic Targets |
$15 |
$8 |
$25 |
$13 |
| 50-Foot Paper Targets |
$10 |
$5 |
$20 |
$10 |
| 200, 300, 600-yard Electronic Targets |
$20 |
$10 |
$35 |
$18 |
| 10-Day Pass (10 visits All Day or Half Day) |
|
|
$200 |
$100 |
| Note: All juniors (age 10-17) must be accompanied by a responsible adult. Both the junior and responsible adult must successfully complete the CMP Marksmanship Park Safety class prior to participating in live fire on park property. |
Share the post "Talladega Marksmanship Park Nears Completion"
January 1st, 2015
Happy New Year to all our readers worldwide, and especially the 26,500+ members of the AccurateShooter Forum. We hope 2015 brings you happiness in your lives and success in your endeavors. And we wish for small groups, good scores, and successful hunts in the New Year.
Download free wallpapers from goodfon.com.
We hope that, in 2015, you’ll enjoy your precision rifles, spending “quality time” at the range with good friends. We upgraded our site this year, acquiring new high-speed dedicated servers. We hope you’ll continue to enjoy our feature articles, our Daily Bulletin, our match reports, and our Free Forum Classifieds. The formula seems to be working — our audience is bigger than ever and it just keeps growing, with over 150,000+ unique users visiting the site every week.
Forum Membership Grows 13% in 2014
Our Shooters’ Forum grew significantly in 2014. Membership grew by 13% as ranks swelled to over 26,500 members! More people are successfully buying and selling in our FREE Forum Classifieds section than ever before. Remember, user donations help make our Free Classifieds possible.
Daily Bulletin Is a Big Hit
The AccurateShooter Daily Bulletin has become a “must read” for anyone interested in serious rifle accuracy. In the Bulletin you’ll find money-saving sale notices, timely match reports, and a host of reloading and accurizing tips. The Bulletin has become THE source for exclusive “scoops” on new products and new shooting technologies. Eric Stecker of Berger Bullets says: “You guys have become the ‘USA Today’ of the precision shooting market.” 365 days a year we offer a unique combination of shooting tips, gear reviews, industry news, and highlighted bargains and special sales.
We need your support. For over 10 years the site has relied largely on volunteer efforts by dedicated shooters. But as the site grows, serving a larger audience, we need the assistance of professional gunsmiths, writers, and video editors. Those guys don’t work for glory alone.
Consider this — what do you pay for a movie ticket these days? Probably $8.50 or more for 90 minutes of escapism. For a buck a month ($12 a year) you can help this site provide a YEAR’s worth of info, tests, and shooting news that you won’t find anywhere else.
 In the past quarter about 120 site users have donated. We thank all those who have generously contributed. But that still leaves tens of thousands of users who access the site regularly without contributing. In fact, though our readership grew significantly in 2014, we received $3000.00 less in donations than during 2013.
Here’s our proposal. First, if you have used our FREE Classifieds to successfully sell your rifles or shooting gear, consider sending in a dollar or two from your sale proceeds. Second, for those who use the site regularly, consider donating One Dollar a Month. That’s less than the price of a cup of coffee.
How to Contribute
Making a donation to the site is simple and easy. Just click on the orange “Donate” button at right. If you have a credit card, you don’t need a Paypal account to contribute. Any sum is welcome — donations need not be large. |
Help Support this Site by Making a Secure Donation.
|
If you don’t like Paypal, you can send a check. Make the check payable to our “Answerman” Jeff Williams. Please list your Forum Log-In Name (if any), and mail the check to:
Jeff Williams
P.O. Box 2409
Evergreen, CO 80437-2409
Share the post "Happy New Year and Message to Our Readers Worldwide"
|
