Gun Tech: Top Barrel-Makers Adopt Degaussing Technology
Advancements in barrel technology in recent decades have been impressive. Today’s premium barrels deliver accuracy that could only have been dreamed-of decades ago. And now a new development promises to help barrel-makers craft the most uniform, consistent, and stable barrels ever.
What’s the new technology? You may be surprised. It’s not a surface treatment, or a cryogenic bath. The latest development in barrel manufacturing is Degaussing — the process of de-magnetizing metal objects. Degaussing is now used in many industries to uniform metallic products and to prevent unwanted interactions with magnetic fields. LEARN MORE.
Degaussing is the process of decreasing or eliminating a remnant magnetic field. It is named after the gauss, a unit of magnetism, which in turn was named after Carl Friedrich Gauss.
At the recent IWA show in Germany, Vallon GmbH, a German manufacturer of degaussing machines, told us that two major Wisconsin barrel-makers have purchased Vallon industrial degaussing units. The units sold to the American barrel-makers are similar to Vallon’s EMS unit show below. This can degauss (i.e. de-magnetize) 50 barrel blanks in one pass.
The Vallon degausser works by passing the barrel steel through a coil. Vallon explains: “The density of magnetic field lines is at its maximum in the coil centre, and is strongly decreasing towards the outside. If a ferromagnetic work piece (steel) is introduced into the coil, the field lines are concentrating and flooding the work piece. The conductivity of steel is up to 800 times higher than that of air. Degaussing is done during a continuous movement of the work piece, leading out of the coil. Decreasing field strength is achieved by a slow extraction from the coil.”
How Degaussing Improves Barrel Steel and Rifle Performance
So what does magnetism have to do with barrel performance? How can degaussing help make a barrel better? Vallon’s scientists tell us that degaussing has three major benefits. First, it aligns ferrous elements within the barrels, strengthening the steel at the molecular level from the inside out. Second, by reducing static surface charges, degaussing reduces chatter during drilling, which creates a straighter bore with a better surface finish. Lastly, there is evidence that degaussed barrels produce slightly more velocity. When a copper-clad bullet spins through a non-degaussed (magnetically-charged) barrel, this creates waste electrical energy. The energy expended reduces velocity very slightly. You can see this effect yourself if you spin a copper rod in the middle of a donut-shaped magnet. This creates an electrical charge.
Here a barrel is checked after degaussing with a Vallon EMS. The meter records a zero magnetic value, showing complete degaussing success.
Degaussing Will Add $50.00 to Barrel Cost
We know what you’re thinking: “All right, degaussing seems beneficial, but how much will this add to the cost of my new barrel?” Based on off-the-record conversations with two barrel-makers, we estimate that degaussing will add less than $50.00 to the cost of a new barrel blank. That’s a small price to pay for greater accuracy and barrel life.
Ask a Sailor — F-Class Champion and
U.S. Navy Veteran Explains Degaussing
We asked reigning F-TR Champion James Crofts about barrel degaussing. A U.S. Navy veteran, he immediately understood the potential benefits of this process. “I served in nuclear submarines. Since before World War II, the U.S. Navy degaussed its subs and smaller warships. This had many benefits. Principally, it helped reduce the risk of triggering magnetic mines. But that wasn’t the only benefit — the degaussing process gave the steel greater resilience and longevity. And that’s why the Navy degaussed non-combat vessels as well. Will a degaussed barrel shoot better? Honestly I can’t say. But based on my Navy experience, I bet degaussed steel will be more uniform and will last longer. I’m glad somebody is trying this out on rifle barrels. Put me on the waiting list!”
The above photo show a U.S. nuclear submarine during a degaussing (also called “deperming”) session. This reduces the vessel’s electromagnetic signature, making it more stealthy. Deperming also adds to the vessel’s longevity. With steel-hulled ships, static electricity builds up as the hull slices through the water. A powerful, constant static charge will cause the steel to deteriorate. Degaussing (deperming) helps prevent this, extending the life of the hull.
Similar Posts:
- Barrel Tech — Precision Barrel Bore-Honing Technology
- Modern Barrel Honing Technology — High-Tech at Work
- SHOT Show Report: MMI-Trutec Salt-Bath Nitriding for Barrels
- Tech Trends: Precision Barrel Bore-Honing
- High-Tech Honing — Major Advance in Barrel Making
Share the post "Gun Tech: Top Barrel-Makers Adopt Degaussing Technology"
Tags: Barrel, Barrel-making, degaussing, deperming, Germany, Guass, Gunsmithing, James Crofts, Krieger Barrels, Submarine, U.S. Navy, Vallon
Leading on from this, projectiles should be degaussed, dies and presses as well. Don’t forget the bipod or rest as they can affect the magnetic anomaly around the barrel. I better change the date on my watch!!
I think this one is legitimate regardless of the date. I worked for the Navy in an ordnance overhaul facility for about 30 years and degaussing was a common process.
Great idea, I’ll degauss my Retreiver as to not interfere with waterfowl inertial navigation in the hopes of filling bag limits as they fly within gunning range. Brilliant!
I can see how it would help the chips clear when the bore is being drilled.
But $50 per barrel?! They do 50 blanks at a time, so one batch costs $2500?! I mean, it’s not leaving a layer of gold, is it? Why would it cost that much? seems like it ought to cost about a buck a barrel.
I worked at an Iron works plant as a welder for a couple of years and we ran the big I beams through a degaussing step before it went to the wheelabrator for blasting. The idea was to remove all the magnetic fields that had developed from drilling and welding on the big beams. Never knew the reason why. Maybe this?
Check your calendar what day is it?
Is this mil-spec degaussing or just low quality civilian degaussing?
What prevents the barrel from remagnetizing as it is used, cleaned, and exposed to magnetic fields?
I heard the earth’s magnetic field will soon reverse. Will this give the Aussies an advantage?
It’s only necessary when the barrel is diametrically magnetized, if it is axially magnetized it actually helps keep the burning gasses more in a column behind the bullet.
Absolute crap!!
That is an Edmunds air gage unit !!!
Editor: Calm down, relax, and look at the date of the article…