The National Shooting Sports Foundation (NSSF) this week learned that United Parcel Service (UPS) has apparently changed its policy regarding the shipment of firearms suppressors. According to the NSSF, a new policy is in effect at UPS facilities nationwide. This new policy states that UPS will no longer ship suppressors, even between Federal licensees.
NSSF representatives are now trying to find out why UPS has changed its shipping policies:
“NSSF is working with UPS executives to determine what prompted the enforcement of this unwarranted policy. We are unaware of any thefts or losses that would explain the shipping company’s sudden decision to enforce a prohibition against shipment. NSSF will keep you apprised of developments. Separately, NSSF is also working with the U.S. State Department to achieve a change of policy to allow export of suppressors.”
Well it looks like Gunbroker.com may (finally) have some competition. A new gun auction site, eGunner.com, has just been launched by Bud’s Gun Shop, a major retailer. eGunner.com was created to help gun stores sell their firearms inventory. But the site is not limited to commercial dealers. Private gun sellers can also list pistols, rifles, shotguns, and other shooting hardware.
Flat Fee Listings — Pay $10 or $15 When Gun Sells
eGunner.com has a very simple fee structure. It cost nothing to list an item for sale. There is a flat fee at the close of a successful auction: $10 for guns under $500 and $15 for guns $500 and up.
Brownells’ Do-It-Yourself (DIY) video series provides logical, step-by-step installation help for triggers, stocks, and springs. Nine separate videos cover Brownells various DIY Kits. Not sure if you’re up to the project? Just watch each video to see what’s involved. The nine DIY kits are:
Sierra Bullets recently profiled Mike Walker, Remington engineer and first president of the National Benchrest Shooters Association (NBRSA). In the vintage photo above, Mike is shown with his Remington-actioned benchrest rifle at the 1994 Super Shoot. Mike had reason to smile — at that 1994 event, Walker set a 100-yard small group record with a phenomenal .046″ five-shot group. Mike was truly one of the “founding fathers” of modern benchrest shooting. As Sierra notes: “The field of rifle accuracy and the sport of benchrest shooting would be very different today, were it not for this man.”
Along with Remington Engineer Jim Stekl, Mike Walker helped develop a wildcat that became the 6mmBR cartridge. The original 6mm Benchrest Remington wildcat was a necked-down .308 x 1.5″ Barnes cartridge. That Barnes cartridge was derived from the .308 Winchester case, as shortened to 1.5 inches. The parent .308 Win case has a large primer pocket (though Remington did make a special run of small primer pocket .308 brass). Remington later made factory small primer pocket 6mm BR Rem brass. Compared to the original 6mm BR Remington case, the modern 6mmBR Norma cartridge has very slightly different dimensions, with a small primer pocket and a small 1.5mm (0.059″) flash-hole.
For many riflemen, reading the wind is the toughest challenge in long-range shooting. Wind speeds and directions can change rapidly, mirage can be misleading, and terrain features can cause hard-to-predict effects. To become a competent wind reader, you need range-time and expert mentoring. In the latter department, Frank Galli, founder of Sniper’s Hide, has just released a new digital resource: Wind Reading Basics for the Tactical Shooter.
Wind Reading Basics is much more than an eBook — it has charts, instructions for ballistic calculators, and even embedded videos. Galli explains: “We break down the formulas, walk you through using a ballistic computer, and give you all the information in one place. From videos, to useful charts, we make it simple to get started. It’s all about having a plan, and we give you that plan.”
Galli’s Wind Reading Basics, priced at $11.99, can be downloaded from iTunes for iPads, iPhones and iOS compatible devices. Here are sample sections from the eBook (which includes videos):
Gunsmith Nat Lambeth (“RustyStud” on our Shooters’ Forum) offers the following advice for readers who need to ship rifles or major gun components (actions, barrels etc.) to gunsmiths or repair facilities.
You have several options when shipping your guns to and from a gunsmith. Nat Lambeth has tried them all and had problems with them all. Here are some pointers:
1. Always package your unloaded firearm so that it is not loose and can’t work itself loose during transport. I recommend, at minimum, you use a hardcase inside a cardboard box. You can order a hard case from any of the major gun gear web vendors or get one at Walmart. It will come in a nice cardboard box. Just open the end and slide it out. Put your gun in the plastic hard case (after oiling the metal parts) and slide it back into the box. Then tape and relabel the box. Make sure marking on the box does NOT identify the contents as a gun. (You may be required to identify the contents to the shipping company or U.S. Postal Service clerk however.) For a very expensive gun, consider using a wood shipping crate. I will be making some shipping cases from plywood and foam line them. I will have to charge my customer a deposit and when they return the shipping crate I will return their deposit.
2. Pack individual components carefully, and enclose them in separate bubble wrap (or styrofoam) if there is any chance the parts can contact one another. Your editor had an experience where the finish of a fine, blued handgun was ruined because the repair facility had placed old, replaced trigger parts loosely in a foam-lined case with the handgun. During shipping these spare parts worked back and forth, gouging and scratching the pistol.
3. Confirm the recipient’s address BEFORE you ship. Individuals and businesses change locations all the time. Don’t assume an address you used a few months ago is still valid. It’s tempting to use old addresses that are pre-configured in the UPS or Fedex web-based shipping programs, but you should always confirm address validity prior to shipping.
You probably know by now that David Tubb has introduced a new two-stage trigger for Remington 700 rifles, the Model T7T. Priced at $385.00, the new T7T Trigger is a true two-stage design: first and second stages are independently adjustable for both weight and feel. Overall (combined stage) trigger pull weight can be adjusted from just under 1 pound to slightly over 3.5 pounds.
If you are interested in the 7ZT, watch these two videos. The first shows how to adjust pull-weights for both stages. The second video shows how to modify your stock to provide clearance for the T7T.
This video shows how to adjust the new Tubb T7T two-stage trigger for Remington 700s:
If you have an interest in historic arms, or just enjoy a diversion from the world of precision centerfire rifles, muzzle-loaders can be fun. There are also many states where hunters with muzzle-loaders enjoy a longer (and/or earlier) hunting season.
If you want to learn more about muzzle-loaders, the NRA and the National Muzzleloading Rifle Association have created an excellent new book, the NRA How-To-Series on Muzzleloading. This 132-page handbook ($12.00) covers muzzleloading safety, fundamentals of muzzleloader shooting, black powder basics, shooting positions, cleaning, storage and more. The “how-to” guide covers rifle, pistol, and shotgun muzzle-loaders.
The How-To book is a good starter publication for anyone interested in muzzle-loaders. Along with the book, the NRA recommends that novices attend a muzzleloading course to learn safe shooting practices from qualified instructors.
Some folks think you need a new (or nearly-new) barrel to win a benchrest match. That may be true in the centerfire game, but in the world of rimfire benchrest, things are different. Good barrels can remain accurate for a long, long time. That was demonstrated by our friend Joe Friedrich who recently set a new ARA 4-target Aggregate record. Joe was shooting his trusty old “Sweet Pea” rifle with a very well-worn barrel. In fact, Joe’s record-setting Benchmark barrel has logged well over 100,000 rounds. That’s right, a barrel with over 100K rounds shot the best 4-target ARA Agg ever. Will wonders never cease…
In this video, Joe talks about his rifle, the amazing longevity of his Benchmark barrel, and the ELEY ammo he used to shoot two 2500s on the same day (with a 2475 average for four targets):
The Remington 700 is the most popular bolt-action rifle in America, at least according to Gunbroker.com sales figures for new and “previously-owned” rifles. So, chances are that you (or a close family member) may have a Rem 700 of some vintage sitting in the gunsafe. But do you have a copy of the latest Remington 700 product manual in digital PDF format? Probably not. And do you have the official Rem 700 factory target? Again, probably not.
