Tuesday Tumble — How to Make Lake City Brass Shine Again
“Once-fired, lot-number-traceable Lake City 7.62×51. This has been de-primed, pocket-swaged, small base body die’d, full-length sized, trimmed with a Gracey Trimmer, and tumbled. Now it’s shiny again. It’s like gourmet macaroni for shooters!” — Dennis Santiago
Our friend Dennis Santiago shoots a variety of disciplines, including Vintage Military Rifle. He burns through a lot of brass, some of it run through gas guns, so he often saves money by acquiring once-fired Lake City Arsenal brass. But that stuff is often pretty ugly when it arrives. For his “previously-owned” Lake City Brass, Dennis does a complete case prep operation and a thorough cleaning/tumbling operation. Special attention is paid to the primer pockets — they are swaged to remove the military crimp. The cases are trimmed and chamfered in one operation using a Gracey Powered Case Trimmer.
Dennis likes once-fired Lake City brass for some applications. The price is right, and with proper attention to detail during case prep, Lake City brass can shoot exceptionally well indeed. You may want to sort Lake City brass by weight. To remove the military crimp you have a variety of options — you can swage it out with a special tool like Dennis does, or you can ream out the crimp. For Wilson trimmer owners, Wilson makes a special Primer Pocket Reamer to remove military crimps. It works very well, as shown below:
Case Processing with the Gracey Trimmer
Designed by Doyle Gracey 30 years ago, the Gracey machine trims, deburs and chamfers in one operation, indexing off the case shoulder. The manufacturer claims the Gracey will process 20 cases per minute while holding .002″ tolerances on trim length. Two steel cutters are employed — one cutter trims the case to length and puts a chamfer on the inside of the case mouth. The second cutter removes the burr from the outside of the case-mouth. A 1/15 hp motor turns 1550 rpm. Interestingly, a clamped rubber hose serves as the “drive shaft” to turn the cutting head.
Trey Tuggle, writing in Shooting Sports USA, reviewed the Gracey Trimmer, giving it generally high marks, though it lacks some of the refinements of the more modern Giraud Trimmer:
“This model may have a piece of wood for a base, no on-off swith and a piece of bent sheet metial to contain brass shavings — but it does trim, debur and chamfer with great speed and accuracy at a nice price. The [Gracey] two-bladed cutter requires a little more patience to adjust than the one-piece cutter on the Giraud, but it gets the job done superbly. [The Gracey] does the job for less money, if you’re willing to tinker with the cutter blade adjustment.” Gracey machines are still available new from MatchPrep.com for $335.00 (or $235.00 without motor).
Similar Posts:
- How to Ream Military Primer Pocket Crimps with Wilson Tool
- Remove Military Primer Pocket Crimps with Wilson Reamer Tool
- Remove Military Primer Crimp with Wilson Primer Pocket Reamer
- Carbide Cutter Upgrade for Wilson Case Trimmers
- Good Deal on Lake City 5.56x45mm (223 Remington) Brass
Share the post "Tuesday Tumble — How to Make Lake City Brass Shine Again"
Tags: Brass, Cartridge, Dennis Santiago, Giraud, Gracey Trimmer, Lake City, Tumbling
Giraud Tool Co. sells a carbide cutter for $30.00 that will replace the two-blade system original to the Gracey trimmer. Much easier to adjust to the case mouth for trimming, chamfering and deburring in one operation. Lasts longer too.