September 11th, 2016

Video Guide to Rust Removal from Brownell’s

Brownell’s has prepared a useful video showing how to remove light rust from a firearm. This shows how to use soft cloths, polishes, and 0000 steel wool to eliminate light surface rust. CAUTION — if you have a very high gloss blued finish, ANY abrasive and even the finest grade of oiled steel wool can scratch or alter the finish. With something like a $1200.00 “Royal Blue” Colt Python, it may be better to tolerate a few small pits than to work it over with steel wool.

Watch Brownell’s Video on Rust Removal

Brownell’s technician, Steve Ostrem, notes that many things can promote rust — some you might not expect. In addition to moisture in the air, rust can be caused by the salts and oils from your hands, sweat, blood, or even insect repellent. Ostrem also observes that temperature changes can produce condensation which may lead to rust inside the gun that you don’t even notice: “In the real world we know that if you take the gun outside, sooner or later, it’s going to rust. When you come inside, wipe the gun down the first opportunity you get. If you bring a cold gun into a warm, humid house, you’re going to have an instant coating of moisture… make sure you get the gun dried off and you’ll avoid a lot of problems.”

Rust Prevention
We’ve conducted a comprehensive test of corrosion-fighters. Among the best products to prevent rust are Boeshield T-9, Corrosion-X, and Eezox. Break-Free also works well, but it leaves a somewhat greasy residue, and it did not perform as well during long-term salt exposure as did the other three products.

Corrosion rust block oil cosmoline

For long-term storage, nothing beats a coating of Cosmoline, Rig or similar grease. This provides a barrier layer that blocks the oxidation process, which is how rust forms. These greases performed extremely well in a comparison test of Rust Preventative Products performed by Brownell’s. CLICK HERE for Comparison Test.

Similar Posts:

Tags: , , , ,