Keith Glasscock is one of America’s greatest F-Class shooters, as well as a highly respected wind coach. A High Master, Keith finished second overall at the 2021 NRA F-Class Long Range Championship in F-Open division. He also finished second at the 2020 Nationals, tied with F-Open winner Pat Scully on points, but with fewer Xs. And he took second also at the 2019 Nationals. His consistency is unrivaled, which means he definitely knows the secrets of long range wind calling and loading ultra-accurate ammo.
Keith has a popular YouTube Channel with new content every week. On Keith’s Winning in the Wind channel, Keith offers 60+ informative videos on a wide range of topics including wind reading, reloading, component selection, load development, and training. For today’s Video Showcase, we offer four of our favorite Keith Glasscock videos. Each video has important points that can benefit any competitive rifle shooter, whether you shoot in local 100-yard fun matches or compete at the National Level in F-Class, LR Benchrest, Palma, or High Power.
How to Find (and Fine-Tune) Seating Depth
This is Keith’s most popular video. Keith definitely knows how to maximize accuracy by finding the optimal seating depth for each particular barrel. He is achieving groups in the high Ones for three shots. That would be good for a short-range benchrest cartridge, but Keith is achieving that with a .284 Winchester which has much more recoil. If you shoot F-TR or F-Open or even PRS, you should watch this video.
How to Lower your ES/SD and Reduce Vertical at Long Range
This is Keith’s first video in a series on how to improve long range groups, precision, and accuracy by reducing velocity Extreme Spread (ES) and Standard Deviation (SD). To achieve the lowest ES you need to look at multiple processes, including precision powder weighing, careful seating, brass annealing, and primer selection. Another factor is bullet selection. Not all bullets of the same nominal caliber and weight class have exactly the same bullet diameter or shape. Sometimes you can get better accuracy AND lower ES by trying a different brand of bullet. We have found bullet diameters, of the same stated caliber, can vary by up to .0008″ (eight ten-thousandths). Some barrels like the fatter bullets, while other barrels may favor the skinny bullets.
How to Find Bullet-to-Rifling Touch Point
Before you even start to load for a new rifle you need to know the point at which the bullet in a loaded round will first touch the rifling. (This will be a base to ogive measurement on your round). Beyond that point you are “in the lands”. If you load shorter than that base-to-ogive length you are “jumping” your bullets. Some cartridge/bullet combos typically shoot best in the lands, while with other bullets and cartridges, jumping is the way to go. Additionally, with some disciplines it is wise to jump your bullets since you may have to unload a chambered round while on the firing line. In this video Keith shows a number of methods to determine “length to lands” with repeatable precision.
Field Test and Review of SEB Mini-X Coaxial Front Rest
While gear reviews are not the primary focus of Keith’s YouTube Channel, Keith does talk about products he likes and uses. In this video. Keith reviews the SEB Mini-X, the newest coaxial tripod rest from SEB Rests. The Mini-X offers fast, precise windage and elevation adjustment with the joystick control. The unit is much easier to pack and transport than a large, heavy front rest such as a SEB NEO or Farley. The latest Mini-X also has upgraded foot controls that make it easier to level the rest on uneven ground. For more info, see our SEB Mini-X Report.
Share the post "Video Showcase: Wisdom from Keith Glasscock"
Tomorrow is the first day of August, and that means it’s time to get ready for National Shooting Sports Month (NSSM). To help grow the ranks of shooters, the National Shooting Sports Foundation (NSSF) asks you to bring a new shooter to the range in August. That’s a good mission — adding to the ranks of shooters is the best way to preserve our Second Amendment rights.
This coast-to-coast celebration spotlights the fun and enjoyment of target shooting. Newcomers can take their first shots, and experienced shooters can invite someone new to the range or help an erstwhile shooter rediscover the fun of target shooting. This month-long event involves all the shooting sports — rifle, pistol, and shotgun.
Find Shooting Sports Events Near You
The NSSF’s ShootingSportsMonth.org website offers a comprehensive, searchable database. This lets you search by state, to find ranges, events, and sales promotions near you. Visit the NSSF online database of NSSM shooting events to find matches, clinics, training sessions, special sales — and much more.
Great FREE Targets for Fun at the Range
To promote National Shooting Sports Month, the NSSF has created a dozen FREE Downloadable Targets. There are regular bullseyes, as well as Darts, Golf, and more. We really like the Billiards target and kids love the Water Balloons target. You can download all 12 targets for free, and then print them out, ideally with a color printer. Have at it!
The final individual match results have been tallied and there are two new NRA Long Range F-Class National Champions: Ian Klemm in F-TR and Tod Hendricks in F-Open. Congrats to both of these men for their outstanding performances. Ian, a multi-time Champion, has really dominated the F-TR field in recent years. This is now his FOURTH F-TR National Championship, having previously won in 2020, 2018, and 2017. That is dominance! And Tod has long been a top competitor, including past F-Open team (Grand Agg) and individual (Mid-Range) wins at the Berger SW Nationals.
Finishing second in F-Open was Forum member Keith Glasscock, host of the popular Winning in the Wind YouTube Channel. Second in F-TR was Matt Schwartzkopf, a great guy who also supervises the Berger SW Nationals at Ben Avery. Matt is a double amputee below the knee, but he has never let that issue hold him back in competition.
Comments from F-Open Winner Tod Hendricks
Tod told us: “The heat and humidity were very challenging, but everyone had to deal with that. I struggled a bit on the first two relays on Day One, actually shooting an 8 due to a mental mistake on relay one. Both those relays were cleanable and I dropped 6 points. Being able to refocus myself and only drop 3 points in the last six relays is something that I will forever use as a mental tool. I’ve been close to winning a few big matches. I never felt like I choked at the end, but after a while you start to question yourself a little. Of course, this win got that monkey off my back.
I’d like to thank my sponsors Lapua, Brux barrels, Borden Accuracy, and Kahles, as well as my teammates on Team LBB — they were pulling for me and I felt it. Shout out to X-Ring Rifle Stocks — the owner Jason and I developed a new F-Open stock a couple years ago. He’s a very smart and hard working guy who took the time to listen to a few unconventional ideas.”
Matt Schwartzkopf (center, dark blue shirt) with Michelle Gallagher at 2021 F-Class Nationals. Photo by Forum member Turbulent Turtle.
Here is one of Keith Glasscock’s fine videos from his Winning in the Wind YouTube Channel:
Keith, who finished second overall in F-Open, offered these insights about the F-Class LR Nationals: “The key to performing well in Atterbury revolved around keeping yourself healthy in the heat and humidity. It is difficult to make good decisions when overheated or dehydrated. Winds were only marginally readable, but changes were not ‘sharp’ in nature. With so many excellent competitors at the event, the chances of getting target service in less than 7 seconds was better than even. For the record, the draw of these events is the opportunity to spend time with my F-Class family doing the thing we love.”
Share the post "Ian Klemm and Tod Hendricks Are 2021 F-Class LR Champions"
The NRA F-Class Team Championship was held July 29, 2021. Congrats to the winning squads, Team Indiana (F-Open) and Team USA Blue (F-TR). Conditions were fairly difficult with plenty of rapid wind switches to challenge the wind callers. It was great to see a large number of teams on the firing line, both in F-TR and F-Open.
Second place was very close in both divisions. F-TR was decided on X-count. In F-0pen, Team Kelly McMillan finished second by just one point, but with a huge edge in X-count. Team Kelly McMillan had 83 Xs compared to 66 Xs for Team Indiana. Tim Vaught and Norm Harrold both drilled 23 Xs while Doug Skogman had 20 Xs. Kelly, who sadly passed away recently, would have been proud of this team. His team’s outstanding performance honored his memory.
In F-TR division, Team USA Blue’s Luke Ramsey shot brilliantly to score 396-21X to lead his team. Ian Klemm, currently in first place in the individual F-TR competition, also shot great to tally 392-16X.
Ray Gross joined six good friends to squad up as Team Creedmoor, which finished a very close second in the F-TR division. The top two squads had the same 1559 Aggregate point total with Team USA Blue earning Gold with 57Xs vs. 44Xs for Team Creedmoor.
Ray was proud of his team’s performance: “After a 3-year hiatus, we got the band back together to finish Silver (by Xs) at the U.S. F-Class Long Range Nationals. It was a fairly tough day, living off the flags, with a lot of quick switches. I’ll coach you guys anytime!”
Team Creedmoor team-mates (L to R): Daniel Pohlabel, Paul Phillips, Ray Gross, Brad Sauve, John Droelle, and Jeff Rorer.
Share the post "F-Class LR Team Championship — Team Indiana & Team USA Blue"
In the video below, Shiraz Balolia takes you through the essentials of fire-forming brass with his custom-made, water-cooled benchrest railgun. Shiraz is a current Team member (and former Team Captain) of the U.S. F-Class Open Rifle Team. Shiraz has competed on the National and World level for more than two decades, and has won multiple major International championships in 1000-yard shooting. In this video he will walk you through fire-forming cartridges in .284 Shiraz, a wildcat based on the .284 Winchester.
Fire-forming properly is a pre-requisite for accuracy in a match rifle. Done right, fire-forming can improve cartridge consistency shot to shot. Creating a fire-forming fixture like this, or even a more basic design, can save you time and potential frustration on the range, Shiraz explains. The key is getting the initial case expansion to match your competition chamber quickly but without generating excessive heat. Follow along as Shiraz takes you through the methodology of fire-forming both in his work shop and on the range.
Here Shiraz Balolia takes you through the essentials of fire-forming brass with his custom-made, water-cooled benchrest railgun.
Along with running the successful Grizzly Industrial enterprise, Shiraz is a top competitor and member of the U.S. F-Open team. He has competed in three world championships. In recent years he captured three straight Canadian National F-Class Championships (READ 3-Peat STORY). So, this guy knows his stuff.
Shiraz shows fellow shooters how to fire-form cases efficiently without burning precious match barrel life. In the video above he uses a custom-designed railgun that employs water cooling for the barrel. This is done with hoses running from a sink, so that cool water is constantly flowing through the barrel jacket.
Shiraz says the fired cartridge are actually cool to the touch because the water-jacketed barrel keeps everything at a moderate temperature. (See video at 8:00)
Share the post "Fire-Forming .284 Improved Cases with Water-Cooled Railgun"
Paul Phillips is now best known as an Extreme Long Range (ELR) ace shooting large caliber “boomers”. He was the King of Two Miles in 2019. But Paul has also competed in F-Class and other disciplines. This week he is at Camp Atterbury, Indiana, participating in the NRA F-Class National Championships in F-TR division. He is currently in fourth place, with the final invidual competition to take place this Friday, July 30, 2021 (today 7/29/21 is Team Competition). SEE Current F-TR Standings.
Paul has good skills with a camera as well as a rifle. On his Facebook Page, Paul recently posted images from the F-Class Nationals. He observed: “My First National Match string since 2018. Feels like a .22 rimfire compared to the big bruisers. Lots of fun.”
Mid-Range Team Match at 600 Yards
This photo from the Mid-Range Team Match by Forum member “Turbulent Turtle”.
Paul Phillips also shot the 600-yard Team Match on July 26, 2021. Shown below are score-cards for Paul Phillips and his team-mate Jeff Rorer. Both shot “clean” (not dropping a point), in this particular event, Team Match 6311. Paul’s 200-13X was the second highest score among all competitors on the line, but he didn’t want to take full credit: “I’m just a trigger-puller. Dan Pohlabel was making the wind calls.”
Paul wanted to credit his sponsors: Creedmoor Sports, Manson Precision Reamers, Nightforce Optics, Berger Bullets, Lapua, Vihtavuori, CROSSTAC, Kestrel Ballistics, Labradar, Longshot Cameras, Applied Ballistics LLC, Bullet Central, Bix’n Andy, and Ryan Pierce.
Share the post "Images From Camp Atterbury — Report by Paul Phillips"
With barrels, one wonders “Can a little more length provide a meaningful velocity gain?” To answer that question, Rifleshooter.com performed an interesting test, cutting a .308 Win barrel from 28″ all the way down to 16.5″. The cuts were made in one-inch intervals with a rotary saw. At each cut length, velocity was measured with a Magnetospeed chronograph. To make the test even more interesting, four different types of .308 Win factory ammunition were chronographed at each barrel length.
This is a very useful test is you’re thinking about building a .308 Win hunting rifle, or perhaps thinking of going shorter for your F-TR rifle to save weight.
Test Barrel Lost 22.7 FPS Per Inch (.308 Win Chambering)
How much velocity do you think was lost, on average, for each 1″ reduction in barrel length? The answer may surprise you. With a barrel reduction from 28″ to 16.5″, the average speed loss of the four types of .308 ammo was 261 fps total. That works out to an average loss of 22.7 fps per inch. This chart shows velocity changes for all four ammo varieties:
Summary of Findings:
The average velocity loss per inch, for all four ammo types combined, was 22.7 FPS. By ammo type, the average FPS loss per inch was: 24.6 (Win 147 FMJ), 22.8 (IMI 150 FMJ), 20.9 (Fed GMM 168gr), and 22.5 (Win 180PP).
Interestingly, these numbers jive pretty well with estimates found in reloading manuals. The testers observed: “The Berger Reloading manual says for the 308 Winchester, ‘muzzle velocity will increase (or decrease) by approximately 20 fps per inch from a standard 24″ barrel’.”
How the Test Was Done
The testers described their procedure as follows: “Ballistic data was gathered using a Magnetospeed barrel mounted ballistic chronograph. At each barrel length, the rifle was fired from a front rest with rear bags, with five rounds of each type of ammunition. Average velocity and standard deviation were logged for each round. Since we would be gathering data on 52 different barrel length and ammunition combinations and would not be crowning the barrel after each cut, we decided to eliminate gathering data on group sizes. Once data was gathered for each cartridge at a given barrel length, the rifle was cleared and the bolt was removed. The barrel was cut off using a cold saw. The test protocol was repeated for the next length. Temperature was 47° F.”
CLICK HERE to Read the Rifleshooter.com Test. This includes detailed charts with inch-by-inch velocity numbers, multiple line charts, and complete data sets for each type of ammo. Rifleshooter.com also offers ballistics graphs showing trajectories with different barrel lengths. All in all, this was a very thorough test by the folks at RifleShooter.com.
Much Different Results with 6mmBR and a Longer Barrel
The results from Rifleshooter.com’s .308 barrel cut-down test are quite different than the results we recorded some years ago with a barrel chambered for the 6mmBR cartridge. When we cut our 6mmBR barrel down from 33″ to 28″, we only lost about 8 FPS per inch. Obviously this is a different cartridge type, but also our 6mmBR barrel end length was 5″ longer than Rifleshooter.com’s .308 Win start length. Velocity loss can be more extreme with shorter barrel lengths (and bigger cartridges). Powder burn rates can also make a difference.
Share the post ".308 Win Velocity vs. Barrel Length — 28″ to 16.5″ Cut-Down Test"
On the 6.5 Creedmoor Facebook page we found an eye-catching Savage Model 10 BA Stealth. Rifle owner Derek P. has done some important upgrades, starting with a wicked, spiral-fluted McGowen barrel with red-painted flutes. The red theme was carried over to the chassis which combines fire-engine red with matte black in the middle. The scope rings and even the magazine were painted red to match as well. The whole effect is very striking, as you can see.
The barrel is a 29-inch 1:8″-twist McGowen. The optic is a 4.5-27x56mm Vortex Razor HD GenII with sunshade. That supper-stable rear sandbag is a Protektor DR Bag, one of our favorites. The front sandbag is also a Protektor. The front Rest is the new Protektor Aluminum Rest with Mariners Wheel. Look carefully and you’ll see a flat 2.5″-wide block on the underside of the forearm. That improves stability and tracking.
What we really like is the upgraded rear buttstock section. This is NOT standard by any means. Rifle owner Derek has fitted an aftermarket XLR Tactical Lite Buttstock that sits properly in that Protektor DR rear bag. This unit combines an adjustable buttpad with a nice cheek-rest (with upgraded pad from Tactical Works). And, very importantly, the XLR can be fitted with a “tactical bag rider” or you can easily make your own bag rider.
As the Savage 10 BA Stealth Comes from the Factory
This video shows a box-stock Savage 10BA Stealth. Note how different the stock buttstock/cheekpiece assembly is compared to Derek’s Red Hot Savage.
Share the post "BLING Tactical — Red Hot Savage 10 BA Stealth"
The 2021 NRA Mid-Range F-Class Championships are complete, with the Long-Range competition running right now. We commend the new Mid-Range Champions who both shot spectacular matches. Roger Mayhall didn’t drop a point in F-0pen, finishing with 1800-131X to win F-Open. That’s a brilliant performance.
In F-TR division, Drew Rutherford topped a competitive field with 1791-96X. Hail the new Champions!
Roger Mayhall Wins F-Open Mid-Range with Stunning 1800-131X
6mm Dasher Rifle Takes F-Open Title
Roger shot a 6mm Dasher, a wildcat based on the 6mmBR cartridge. Roger said his rifle was a tack-driver: “I think I owe my gunsmith a beverage or two!” Roger did a superb job of wind-reading to finish 3 days without dropping a point.
“I’ve known Roger for over 5 years. Great man, always willing to help a fellow shooter. Shooting clean all three days with an incredible X-count. Well done! So much for the claim that a 6mm can’t win an Aggregate!” — Jason Simes
“Good job buddy — I told you those Dashers could shoot. Just outstanding shooting.” — Chris Ford
“Awesome shooting Roger! Chalk up a national championship to the 6mm.” — Dan Bramley
About Roger Mayhall’s Championship-Winning Dasher
Posting on Facebook, Roger wrote: “I’ve had a few people ask about the equipment I used in the Mid-Range at Nationals. Here are the particulars:
The gun was a 6 Dasher, supported by a Defiance Deviant action, Bix ‘N Andy trigger, Alex Wheeler LBR F-Class stock, Sightron SV ED 10-50x60mm scope, Dan Bramley tuner on a 30″ Krieger [1:8″-twist] barrel. Also used were a SEB NEO front rest, Dima Rifle Systems Rear Bag with a Dead Bottom Bag. My load consisted of the 105gr Berger Hybrid in a fire-formed 6BR Lapua case propelled by Varget powder and a CCI 450 primer. Barrel work was done by Dan Bramley[.]”
Drew Rutherford Wins F-TR Mid-Range Championship
Drew Rutherford put on a strong performance to win the F-TR Mid-Range Championship. Rutherford was using Eliseo R1 Tubeguns fitted with SEB JoyPod coaxial bipod. Chassis-maker Gary Eliseo noted: “Congratulations to Drew Rutherford, national midrange FTR champion! Drew used his .223 Rem and .308 Win R1 rifles to win the Mid-Range Championship, well done Drew!”
The Competition Machine (Eliseo) R1 Chassis is a very versatile system. As fitted with rear bag-riders and SEB JoyPods, Drew used his R1s with great success. But the same chassis, less bag-rider and bipod, can be used for “hard-holding” Palma Matches, or even High Power competition.
Solomon Sets New Nat’l F-Open 1-Day Record with 600-53X
Finishing second in the F-Open Mid-Range Championship was Bret Solomon with 1798-135X. That was notable because Bret posted the high X-Count, AND set a single-day National Record in the process. Gunsmith Thomas “Speedy” Gonzalez posted: “Congratulations to my friend Bret Solomon on shooting a 200-20X and then setting a new [1-Day] 600-yard National Record of 600-53X at the U.S. F-Class Nationals. Bret was shooting the Lil’ Red Devil in 7mm RSAUM with a new Bartlein 4-groove barrel I forced him to shoot!”
Christened the “Little Red Devil” by Speedy, this ruby red, flame maple-stocked beauty is chambered in .284 Winchester. It features a Melonited BAT 3LL action with two bolts (regular and magnum bolt face). The stock is crafted by Will McCloskey using advanced CNC machines, allowing ultra-precise tolerances for improved tracking and perfect geometry.
Torrefied Wood from Yamaha, CNC-Milled to Perfection
This wood is very special — the flame maple was sourced from Yamaha which used a torrefaction process to stabilize the wood and prevent warping. Yamaha’s proprietary ARE process was developed by Yamaha for musical instruments. Speedy explained that Yamaha uses heat and pressure (we think) to stabilize the wood and dampen vibrations. During torrefaction, the sap in the wood actually crystallizes.
For this rifle build, the torrefied wood blank was CNC-milled by Will McCloskey to “best-in-industry” tolerances. A special red-tone polyester finish Lee Garver, a noted guitar painter. This very hard, yet glossy finish makes the stock “pretty nearly scratch-proof” according to Speedy.
Share the post "2021 Mid-Range Champions: Mayhall F-Open and Rutherford F-TR"
If you like accurate rifles and reactive targets, you’ll enjoy this 48-minute video from Shooting USA TV, which features long-range varmint silhouette competition in Texas, the Lone Star State. We have participated in these kind of matches on the West Coast — they are definitely a ton of fun. The sport combines the pure accuracy of benchrest competition with the fun of knocking down critter targets. These are smaller than standard silhouettes, so it’s quite a challenge to hit them at 300 yards and beyond.
In this episode, host John Scoutten competes with his 6.5 Creedmoor PRS rifle. He found that 1-MOA Coyotes offered plenty of challenge at 385 meters! Most shooters use benchrest-grade rifles with premium front rests.
Full 48-Minute Episode of Shooting USA featuring Texas Varmint Silhouette:
5″x4″ Hogs — 500 Meters
Chickens (on Swingers) — 600 Yards
Pigs (on Swingers) — 750 Yards
EDITOR: We strongly recommend you take the time to watch this Shooting USA feature — it shows some top-flight benchrest rifles, and also covers the origins of benchrest varmint silhouette in Pennsylvania. There are even some AccurateShooter Forum members on screen. John Scoutten also does nice job explaining the challenges of shooting this discipline with a PRS rig. We think any benchrest or tactical shooter will really enjoy watching this video.
Travis Frazier, who created steel targets with Field & Cave Outfitters, says shooters love the reactive targets: “The most exciting thing is seeing your hits — these [targets] really go airborne”. Yep, that’s the best thing about Varmint Silhouette matches — hits deliver instant gratification. Travis designs and produces these steel targets.
This Texas match features multiple target shapes, 10 at each distance: Tiny Prairie Dogs at 200m, 3″x3″ Armadillos at 300m; 3″x5″ Coyotes at 385m; 5″x4″ Hogs at 500m; Chickens (on swingers) at 600 yards; and Pigs (on Swingers) at 750 yards. Competitors are allowed 10 rounds and 10 minutes to hit each set of targets.
Share the post "Lone Star Silhouette — Fun & Challenging Texas Steel Match"
While reloading components remain in short supply, there is a new source for affordable rifle bullets in popular calibers. Creedmoor Sports is now offering American Bullet Company (ABC) Practice Bullets in .22, 6mm, and .308 calibers. These are factory seconds from a major American manufacturer.
Creedmoor Sports explains that it may make sense to shoot less expensive bullets during practice sessions, particularly for sling-shooters: “We believe a key to winning a competition is the practice time you put in leading up to the match. ABC Practice Bullets are an excellent alternative for competitors who may not want to use their expensive bullets during a practice session and save their best loads for a match.” With these ABC Practice Bullets you can save 20-30% off the price of first-run, major brand BTHP bullets. With those savings, you spend less money per round, so live-fire practice doesn’t bust your budget.
For some disciplines, these bullets aren’t just for practice. We predict the ABC 6mm bullets will work well in PRS/NRL matches with popular calibers 6mmBR, 6 Dasher, 6 GT, 6-6.5×47 Lapua, and 6mm Creedmoor.
ABC Practice Bullets are factory seconds, but they’re still great for training. Along with the 6mm 107gr bullets, Creedmoor is offering .22-Caliber (52gr, 55gr, 77gr) and .308-Caliber (125gr, 168gr, 175gr) practice bullets. All offerings have very attractive pricing, starting at $17.80/100 (for .22 Cal 55gr).
NOTE: All ABC Practice Bullets are sold in 500-ct boxes (by weight). All bullets in each 500-ct boxes will be from the same lot in each box. However, lots may vary from box to box.
How These Practice Bullets May Vary from First-Run Bullets
Issues separating American Bullet Company Practice Bullets from factory first-run bullets may include:
Minor scratch marks on the jacket
Polishing media or compound in the hollow point
Boat tail dimensions that vary slightly from the print
Weight variance — total weight variance of 2.0 grains across the lot
Other minor cosmetic defects
Share the post "New, Affordable Practice Bullets from Creedmoor Sports"
The 2021 NRA F-Class National Championships are underway right now at Camp Atterbury, Indiana. The Mid-Range Nationals concluded yesterday with the Team Match, and the Long-Range F-Class Nationals commence today, July 27, 2021 and run through Friday, July 30th. For F-Class competitors, making the right wind call is a vital skill. Many shooters and team wind coaches will be using Kestrel Wind Meters, widely regarded as the best on the market.
This article reviews the advanced Kestrel 5700 Elite Wind Meter with sophisticated ballistics capabilities. Our review features three videos by F-Class John that show how the Kestrel 5700 Elite works with Applied Ballistics APP software and LiNK connection.
This Part I Video starts with a basic Kestrel Anemometer (blue case, 00:00-00:40) wind meter. Then reviewer F-Class John looks at the “smart” Kestrel 5700 Elite with Applied Ballistics functionality and LiNK Bluetooth connectivity. John explains the many features of the Kestrel 5700 and how it holds a powerful ballistics calculator in the convenient, easy-to-tote Kestrel package. With the Kestrel 5700 Elite, once you enter data about your bullets, velocity, zero, and rifle, the Kestrel can calculate come-ups and wind corrections. If you don’t yet own a Kestrel, we highly recommend you watch this series of videos that explains advanced Kestrel features in detail.
This Part II Video shows the key features of the advanced software APP used by the Kestrel 5700 Elite unit with Applied Ballistics. The Kestrel 5700 can “talk” to a mobile device that runs the Applied Ballistics software APP that contains bullet databases and allows you to enter key information such as muzzle velocity, bullet BC, zero distance, velocity, wind, and environmental factors (altitude, temperature etc.). There are also gun-specific factors such as scope height over bore and barrel twist rate. The video also explains how “range cards” are created and how to view them with your Elite Ballistics-enabled Kestrel. John notes: “The APP is great because you don’t have to fiddle with the Kestrel’s buttons. It’s much easier to enter data and change settings with the APP.”
This Part III video shows how to determine true wind direction by aligning the SIDE of the unit into the wind. You essentially want to set the unit 90 degrees to the wind direction so the impeller runs as slowly as possible. Then, after you set your target distance (See 3:03), the unit can give you precise come-ups for your intended target (10.28 MOA for 559 yards here). The Kestrel then calculates the cross-wind correction as well (See 3:12).
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, the video author may receive a small commission. This helps support F-Class John’s YouTube channel and allows him to continue to make videos like this.
Share the post "TECH REVIEW: Kestrel 5700 Elite with Applied Ballistics Software"
The NRA F-Class Team Championship was held July 29, 2021. Congrats to the winning squads, Team Indiana (F-Open) and Team USA Blue (F-TR). Conditions were fairly difficult with plenty of rapid wind switches to challenge the wind callers. It was great to see a large number of teams on the firing line, both in F-TR and F-Open.
Paul Phillips is now best known as an Extreme Long Range (ELR) ace shooting large caliber “boomers”. He was the 
6mm Dasher Rifle Takes F-Open Title
Drew Rutherford put on a strong performance to win the F-TR Mid-Range Championship. Rutherford was using Eliseo R1 Tubeguns fitted with SEB JoyPod coaxial bipod. Chassis-maker Gary Eliseo noted: “Congratulations to Drew Rutherford, national midrange FTR champion! Drew used his .223 Rem and .308 Win R1 rifles to win the Mid-Range Championship, well done Drew!”
