Eurooptic vortex burris nightforce sale

teslong borescope digital camera barrel monitor

As an Amazon Associate, this site earns a commission from Amazon sales.

July 14th, 2021

.22 LR Rimfire Ammo in Stock Now at Midsouth and Brownells

rimfire ammunition in stock .22 LR Brownells

We are starting to see more factory-loaded ammo hit the shelves at gunstore across the country. Finally, some 9mm ammo is under $20/box. However, good rimfire ammo is still in short supply and when it does arrive, it sells out fast. We did some searching today, and we found good .22 LR rimfire ammo at two of our favorite vendors: Brownells and Midsouth. Check out these deals. NOTE: If you need .22 LR ammo, don’t hesitate. We have found that decent deals will sell out in a day or two.

Midsouth .22 LR Ammunition in stock 7/14/2021:

CLICK PHOTO to go to Ammo Sales Page

Midsouth has SK and Norma .22 LR Ammo in stock. Both are very good manufacturers. Choose from many SK ammo types — all are good choices with good accuracy.

rimfire ammunition in stock .22 LR Brownells

Brownells .22 LR Ammunition in stock 7/14/2021:

CLICK PHOTO to go to Ammo Sales Page

Brownells has specific types of Norma, CCI, Federal, SK and Remington .22 Ammo in stock. The Norma Tac-22 has shot very well in test rifles.

rimfire ammunition in stock .22 LR Brownells

Permalink Bullets, Brass, Ammo, Hot Deals No Comments »
July 14th, 2021

Hornady Precision Rifle Challenge Draws Nearly 200 Competitors

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

One of the biggest PRS matches of the year was held recently. Nearly 200 shooters competed in the 2021 Hornady Precision Rifle Challenge, held July 9-10, 2021 at Hornady’s private 250,000 acre ranch property outside of Evanston, Wyoming, across the state line in Utah. The match featured 18 challenging stages. Course of fire consisted of 200 rounds with “off trail” walking between stages. Natural terrain and high winds made for an exciting match.

Run in Utah’s backcountry, the Hornady Precision Rifle Challenge is a unique long range competition with tough terrain and major elevation changes. This wasn’t a typical PRS Pro Series match by any means. Participants in this challenging Precision Rifle match encounter challenging conditions not typically seen in other tactical matches. And this year was particularly tough, with winds hitting 35 mph on the first day of the competition.

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

Hornady congratulates the following 2021 PRC division and class winners:

Open Division winner: Ken Sanoski
Top Production: Doug Koenig
Top Senior: Rick Reeves
Top Lady: Allison Zane Top
Tactical: Patrick Lorenzo
Top Mil/LE: Kahl Harmon
Top Gas Gun: Buck Holly
Top Junior: Jake Millard

Very High Winds at 2021 PRC
Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooterDoug Koenig took first place in the Production Division shooting Hornady 6mm 110gr A-Tip® bullets. Koenig noted: “This match is one of the toughest in the country and on day one, we experienced 35 mph winds. I am unbelievably impressed with how well the A-Tip bullets handle wind.”

GA Precision’s George Gardner and Bryan Sikes were match directors. “The match would simply not be possible without the help of our amazing ROs and volunteers,” said Sikes. “In addition, [we thank] all of the sponsors that donated to this match — this is the biggest prize table we have ever had.”

Shooting USA hornady precision rifle challenge Utah 2021 AccurateShooter

This video, from last year’s PRC event, is well worth watching. It provides plenty of equipment closeups, shows stage set-ups, and includes “birds-eye-view” drone footage of the scenic range.

Shooting USA hornady precision rifle challenge Utah 2020 AccurateShooter

CLICK HERE for more information about the 2021 Hornady Precision Rifle Challenge.

Permalink Competition, News, Tactical No Comments »
July 14th, 2021

MTM Gun Cleaning Patch Catcher — Effective and Easy to Use

MTM patch catcher

Performs as Promised — Prevents Mess at Home or at Range
When cleaning rifles, wet and dirty patches can make a real mess. And solvent spray from the muzzle is another issue. Here’s a solution — the MTM Gun Cleaning Patch Catcher. Simply slip it over your barrel to contain all the patches pushed out the muzzle. No more mess and stains on your bench/table. When cleaning tasks are done, simply remove the Patch Catcher and dump the contents into the trash.

We’ve tried this product and it definitely helps keep your work surfaces and floors clean. No more messes on the bench or spray from solvents. Purchasers really like this product — it has 80% five-star reviews on Amazon (current Price $9.03). Watch the video to see how the MTM Patch Catcher works.

MTM patch catcher

Here are product reviews from actual MTM Patch Catcher purchasers:

“This box straps over the muzzle end of a barrel and keeps the mess completely contained. Excess cleaning solvents collect in the bottom. Patches fall off the jag and are captured as well when the cleaning rod is withdrawn. It also completely contains the splatter burst when a bore brush exits the muzzle of whatever firearm is being cleaned.” — D.J. Bradley

“This little device is more than a patch catcher. It also contains that dirty, smelly spray when a bore bristle exits the barrel. With the top open, it will also catch spray cleaners and lubes when used on small parts. It takes a little work to mount it on a railed over/under, but it gets the job done there too.” — TwoBoxer

“This does exactly what it claims. It keeps the table or floor clean while you are cleaning barrels. It is easy to use and easy to clean. If you are cleaning guns outside on a range, then you probably don’t need this. If you cleaning them in your garage, then buy this. Your garage and workbench will love you.” — DDDnotes

Q: Does this fit securely if you have a standard muzzle break?
Answer: Yes, I regularly use this product on all of my rifles including my Savage 111 Long Range Hunter with a factory brake. It really keeps the smell down with the top closed. Also stops the splatter of a stiff brush exiting the muzzle. Great Product! — Iklwa

Q: Has anyone used this with an AR15?
Answer: It works quite well — goes on and off easily. Slide it on the barrel until you can tighten the strap behind the flash suppressor.” — Cactus

MTM patch catcher

Permalink - Videos, Gear Review, Hot Deals, Tech Tip No Comments »